1301 East 9th Street, Cleveland, OH 44114-1824 • 866-GET-MROP • www.BarnesDistribution.com

Confidential - Property of Barnes Distribution, A business of MSC Industrial Supply Co. Specifications subject to change without notice.

Platinum SerieS adheSiveS & SealantS

dynatex®

Dynatex Platinum Series High Strength Red Threadlocker

Shaft & Bearing Sealant

Part No. Size Unit

BD1522 50 ml 1

• Locks and seals most threaded assemblies to prevent nuts and bolts from loosening due to vibration• Permanent; Red Color• Apply prior to assembly• Working temperature from -65° to 350°F (-54°C to 177°C)• Fills gaps up to .008 inches• Eliminates the need for stocking lock nuts and lock washers and protects against thread corrosion

• Restores fit to worn assemblies and secures shaft-mounted parts, bushings, bearings, rotors, impalers and gears• Allows the use of slip fit or press fit• Green color• Prevents fretting and corrosion• For use on assemblies with gaps up to .007” in diameter

Pipe Sealant with PTFE

Part No. Size Unit

BD1523 50 ml 1BD1524 250 ml 1

• Locks and seals tapered pipe fittings, lubricates and resists corrosion• Prevents leakage and loosening from vibration and moisture in hydraulic, pneumatic, steam and process piping• Allows final adjustment up to 24 hours after application• Instant sealing to 1,000 psi• Outperforms tape and pipe dope• Operating temperature range: -67°F to 392°F (-55°C to 200°C)

Dynatex Platinum Series Medium Strength Blue Threadlocker

• Locks and seals most threaded assemblies to prevent nuts and bolts from loosening due to vibration• Removable; Blue color• Apply prior to assembly• Working temperature from -65° to 350°F (-54°C to 177°C)• Fills gaps up to .006 inches• Eliminates the need for stocking lock nuts and lock washers and protects against thread corrosion

Part No. Size Unit

BD1516 6 ml 5BD1515 35 ml 1BD1517 50 ml 1

Part No. Size Unit

BD1510 6 ml 5BD1511 35 ml 1BD1512 50 ml 1

K-1521 10/10

Anti-Seize Thread Compound - Hi-Temperature Copper

Part No. Size Unit

BD1527 10 oz. 1BD1528 16 oz. 1

• Lubricates bolt threads and prevents seizing, fretting, pitting and galling caused by high temperatures, heavy loads, vibration and corrosion• Temperature range from 0°F to 1800°F (-18°C to 982°C)• For use with most metals including cast iron, steel, stainless steel, nickel, copper, brass, bronze, titanium, aluminum and monel• Resists water, salt and most shop and automotive fluids• Reduces coefficient of friction by a minimum of 20%

Instant Adhesive

Part No. Size Unit

BD1514 3 gram 5BD1513 20 gram 1

• Instantly bonds metals, aluminum, glass, plastics, ceramics, rubber and other non-porous surfaces in 20 seconds• Clear liquid forms a permanent, transparent bond• Fills gaps to .004”• Holding strength to 5,000 psi

Instant Adhesive Gel

Part No. Size Unit

BD1525 3 gram 5BD1526 20 gram 1

• Surface Insensitive, instant-bonding adhesive in a gel form• Useful on vertical and overhead surfaces because it will not run or drip• Clear gel sets in 60 seconds to form a permanent, transparent bond• Effective on metal, aluminum, glass, plastics, ceramics, rubber and other non-porous surfaces• Holding strength to 3,500 psi

Gasket Maker

Part No. Size Unit

BD1518 35 ml 1BD1519 50 ml 1

• Single component anaerobic sealant for pump flanges, fuel & water pumps, gearbox covers, thermostats• Fills gaps up to .010”, curing to a flexible, solvent resistant seal• Can replace cut gaskets• Purple color• Once cured, it has an operating temperature range of -65°F to 300°F• Non corrosive to aluminum or cast iron parts

dynatex®

Pipe Sealant with PTFE for Stainless Steel

Part No. Size Unit

BD1520 35 ml 1BD1521 250 ml 1

• Locks and seals threaded pipe fittings, lubricates and resists corrosion• Prevents leakage and loosening from vibration and moisture in hydraulic, pneumatic, steam and process piping• Allows final adjustment up to 24 hours after application • Instant sealing to 1,000 psi• For use with Stainless Steel Fittings• Outperforms tape and pipe dope• Seals threaded pipe fittings instantly• Operating temperature range: -67°F to 392°F (-55°C to 200°C)

Pneumatic / Hydraulic Sealant

Part No. Size Unit

BD1529 50 ml 1

• Provides a positive seals on all hydraulic and pneumatic fittings• Does not contain particles or fillers which can contaminate systems• Effective at temperatures to 300°F (149°C)• Resists shock, vibration and pulsating pressure

1301 East 9th Street, Cleveland, OH 44114-1824 • 866-GET-MROP • www.BarnesDistribution.com

Confidential - Property of Barnes Distribution, A business of MSC Industrial Supply Co. Specifications subject to change without notice.