CMS ECAL Protvino in the PANDA barrel Electromagnetic Calorimeter (first look) V.A. Kachanov

Preview:

Citation preview

CMS ECAL

Protvino in the PANDA barrel Electromagnetic Calorimeter

(first look)

V.A. Kachanov

CMS ECAL

CMS ECAL team

IHEP Myasischev Design Bureau Physicists Vassili Kachanov -- team leader Nikolai Goloubev – team leader Serguey Slabospitsky Alexander Anisimov - engineer

Serguey Bityukov Alexander Solovey - designer

Dmitry Konstantinov Anatoly Solovey - engineer

Viatcheslav Grishin Pavel Antipov – engineer (FEA calculation)

Andrey Uzunian Valery Chernjakov - technician

  Vladimir Molchanov Dmitry Ionov – engineer

FEA calculations Alexander Ryabov

Designers&Engineers Andrey Levin Zoya Simonova Nikolai Belikov

Detector Control System Serguey Zelepoukin (deputy project leader DCS ECAL CMS)

CMS ECAL

Protvino in PANDA EMS

CMS ECAL

PANDA EMC

CMS ECAL

PANDA EMC barrel design

CMS ECAL

The detector envelop, assembly of the barrel, and other data are detailed in an integration report discussed in the INT TAG meetings.

Integration report

Some questions from the INT TAG are on studies and have to be answered during 2007(reliability of the cooling screens, assembly, …)

But I still need data as the electronics and data transfer equipment in the support beam

Barrel

CMS ECAL

Geometrical arrangement of the barrel crystals

CMS ECAL

The concept of the barrel slice

CMS ECAL

EMC barrel design

CMS ECAL

What we can do for PANDA EMC at CERN using

CMS ECAL equipment and tooling?

CMS ECAL

CMS ECAL

CMS ECAL ACCOS

PANDA EMC crystal certification at CERN

CMS ECAL

CMS APD gluing facilities

APD gluing for PANDA EMC at CERN

CMS ECAL

Tooling for ECAL barrel assembly

Possible PANDA EMC Submodules assembly at CERN

CMS ECAL

Tooling for supermodules assembly

Possible usage of the large tooling for supermodules (slices) assembly in GSI

CMS ECAL

Supermodules mounting in CMS

Thank you!

Recommended