View
36
Download
1
Category
Preview:
Citation preview
1/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
FeaturesCharmec SF 605 DA ANFO charger with diesel hydraulic drive is designed for face and produc-tion charging in underground mines and tunnels up to 65 m2 cross sections where max face height is 8.4 m.
Standard 500 L ANFO vessel (optional 360 / 720 liters) provides enough explosive storage vol-ume for charging without need for refilling. Ready designed place for stick powder boxes, prim-ers and detonators makes it possible to bring all the needed materials to the workplace at once and eliminates the need for an additional explosive service vehicle. Optional hydraulic driven compressor eliminates the need for external pressure air supply.
The liquid cooled turbo charged Deutz 96 kW or MB 90 kW or air cooled Deutz 86.5 kW TIER 3 approved engines provides clean and efficient operation and gives maximum speed of 25 km/h and 6 km/h in upward 1:7 inclined tunnel.
The FOPS /ROPS approved safety canopy / cabin provides comfortable compartment for the driver and his assistant. The enclosed cabin provides noise level < 75 dB.
Self-extinguishing marine type wire harness with tinned wires and water tight conduits are spe-cially designed for safe and reliable operation in tough underground conditions. All daily checks can be done from the ground level.
Pictured machine may include options and additional equipment.
2/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
CHARGING SYSTEM
One ANFO vessel and work stand, one charging operator500 liter stainless steel ANFO kettlePressure max. 7 barExtra air for chargingPneumatic hand and foot control for charging and blowingCharging hose 19 x 25 mm, 30 mEarth straps front and rear
NBB3S BASKET BOOM
Short 2-men square tube basketLifting capacity 500 kgBoom lift -18º...+ 60ºMax. Lifting height (basket floor) 6.4 mMax. Vertical reach 8.4 mBoom slew 20°/ 30°Automatic levelling of basketDiesel start/stop from basketBattery operated emergency pump for lowering the boom
ENGINE
Liquid cooled turbo charged Deutz TCD 2012 L4, 96 kW/2200 rpm, TIER 3 approved
EXHAUST SYSTEM
Catalytic exhaust gas purifier and muffler
TRANSMISSION
Dana 20 000 series power shift with pump drive group3 speeds forward and reverse4-wheel drive
AXLES
Planetary typeDana 112Load end axle fixedEngine end axle oscillation +/- 10°
TYRES
10.00 - 20 PR 16
PERFORMANCE
1st gear max.5 km/h2nd gear 12 km/h3rd gear 25 km/hMax. tractive effort 90 kNMax speed in upward 1:7 inclined tunnel 12 km/hPerformance curve 4800031
BRAKES
Service brake: hydraulically powered two-circuit oil immersed multidisc brakes in both axlesSafety/Parking brake: spring applied hydraulically released fail-safe -type brake. Brake test possibility in cabin
STEERING
Hydraulic frame steeringOrbitrol typeFrame articulation +/- 40°
FUEL TANK
Capacity 112 L
HYDRAULIC SYSTEM
Variable displacement pump systemPressure setting 190 bar, 95 L/min/2200 rpmHydraulic oil tank capacity 115 LReturn oil filtration 10 μmIndication of level, filtration and temperature
24 VDC ELECTRICAL SYSTEM
Exposed components are min IP 65 standardBattery 2 x 115 AhAlternator 100 AHalogen driving lights (4 + 2 pcs) 70 WHalogen work lights (2 + 2 pcs) 70 WLED parking, brake and indicator lightsLED side lights; amberSide reversing halogen lights 70 W Rotating beacon; amberWire harness (self extinguishing) with tinned wires and water tight conduits
DRIVER’S COMPARTMENT
Open 2-man cabin FOPS/ROPS approvedAir suspended driver’s seatSeats with retractable lap seat beltForward and side seating for the driver with twosets of pedals (brake and accelerator)MID 070 S Multifunctional Display with: • Meters; e.g. speed, RPM, operating hours • Status indicators; e.g. fluid levels, temperatures,
pressures, alarms, faults
GREASING SYSTEM
Centralized grease fittings for the carrier
OTHER
12 kg hand held fire extinguisherStandard symbol labelsHydraulic support legs on rear frame
Technical specification
3/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
CHARGING SYSTEM
ANFO vessel size:• 360 L• 720 LRadio controlled charging and blowing in basketANFO hose diameter: • For manual hose feeding 22 x 28 / 26.5 x 33.5 / 41.5 x 51 mm
• For Mechanical hose feeding 26.5 x 33.5 / 30 x 38 mm
ANFO hose length: • 30 / 60 m
DRIVER’S CABIN
Enclosed cabinAir suspended T-back seat for driver and passenger
ENGINE
Liquid cooled turbo charged MB OM 904 LA, 90 kW/2200 rpm, TIER 3 approved:1st gear max. 5 km/h2nd gear 10 km/h3rd gear 25 km/hMax. tractive effort 90 kNMax speed in upward 1:7 inclined tunnel 12 km/hPerformance curve 4800032Air cooled Deutz D 914 L06 86.5 kW/2300 rpm TIER 3 approvedPerformance curve 100021199
OTHER
LED driving lights (4 + 2 pcs) 18 WLED work lights on cabin (2 + 2 pcs) 43 WWarning lights, 1 unit: • Rotating beacon; red • Rotating beacon; blue
CHARGING SYSTEM
Additional pneumatic charging controls: For toeholes and ground level charging work Mechanical ANFO hose feeding for productioncharging (no reel available)Water for ANFO system: 35 L container
HIGH VOLTAGE ELECTRICS
Electro hydraulic drive 15 kW: Includes 50 m of cable and hydraulically operated cable reel:• 400 V / 50 Hz , 440 V / 60 Hz , 690 V / 50 Hz,
1000 V / 50 HzPilot wire with extra slip ring unit
SUSPENSION
Front axle suspension• Hydraulic front support legs
AIR COMPRESSOR
4 m3 hydraulically driven compressor on front rack4 m3 electrically driven compressor on front rack (requires electro-hydraulic drive)
FOR ENCLOSED CABIN
CD/Radio systemCabin ventilation:• Cabin heating • Air conditioning• Not available with D914 engine
FOR NBB BASKET BOOM
Safety barSafety roof with hydraulic lift:• 400 kg = 240 kg + 2 personsSafety roof with hydraulic lift and slide:• 300 kg = 140 kg + 2 personsLED working lights on safety roof / safety bar (2 pcs) 43 WBoom suspension
FIRE SUPPRESSION SYSTEM
Fogmaker: Manually or automatically actuated Ansul: Manually or automatically actuatedTempus: Manually actuated (Non CE)
GREASING SYSTEM
Automatic lubrication system (Lincoln) for:Carrier or carrier and lifter
Optional equipment Additional equipment
4/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
OTHER
Fast fuel filling system: WigginsOil evacuation kit with sample pointsExtra hand held fire extinguisher (12 kg) Hydraulic front support legsExtra warning lights, 1 unit: Rotating beacon amber, red or blue or strobe light; whiteText labels in: Fin / En / Por / Swe / Rus / Nor / Ger / Fra / Esp / ItaToolbox and maintenance tools2 wheel chocks with bracketsReversing cameraSpare wheel with tyreWLAN connection
SPARE PARTS
Spare parts package A: Available for 1000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. Spare parts package B: Available for 3000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. * Recommendations are based on average hours - can vary a lot depending on work site conditions.
TRAINING SERVICES
Available before delivery, at start up and after deliveryProduct training: Operation and MaintenanceNorSmartFoundation of electrics, hydraulics and mechanicsAuditProcess training:Concrete sprayingChargingProcess audit
AUDIT SERVICES
To improve performance of the machinesTo improve the performance of your processesTo help improve the quality of maintenance operations
SERVICE CONTRACTS
Spare parts supply programmesScheduled inspection programmesSupervision programmesPeriodic maintenance programmesMachine usage programmes
LINK ONE
Link One electronic spare part manuals
WARRANTY SERVICES
Extended warranty
LTC servicesAdditional equipment
5/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
DIMENSIONS
Length 9050 mmWidth 2150 mmHeight 2450 mmWheel base 3650 mmTrack 1650 mmGround clearance as shown 320 mm
TURNING RADIUS
Outer 7360 mmInner 3930 mm
WEIGHT
Operating 11 000 kg
SIDE VIEW
Basic machine
SIDE VIEW
Machine with enclosed cabin
Dimensions
6/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
Dimensions
TOP VIEW
BOOM REACH
7/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
Dimensions
TURNING RADIUS
8/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
Dimensions
BOOM REACH
9/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
Tractive efforts
DEUTZ TCD 2012 L4 96 kWPerformance curve 4800031
MERCEDES-BENZ OM 904 LA 90 kWPerformance curve 4800032
10/10
Technical data sheet10005575009.06.2015
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec SF 605 DA(V)
Tractive efforts
DEUTZ D914 L6 86,5 kWPerformance curve 100021199
Recommended