Embed Size (px)
Citation preview
1/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
FeaturesThe Charmec RM 905 TCA is a self propelled diesel driven twin boom unit for charging, man lifting and installing works in underground excavation and tunnelling. It consists of the new Normet Rigid Frame Carrier (=R) with M-series Cummins Tier4F engine QSB4.5 (119 kW), NBB3 –booms and pneumatically controlled ANFO-charging equipment. Maximum lifting capacity is 500 kg per boom and max lifting height 12 m (measured to the floor of the basket).
Boom controls are in the basket and down on the carrier. Each boom can be operated independently al-lowing several holes to be charged safely two operattors at the same time. Large coverage (16 m width x 11 m height) allows the whole face to be charged from one setup.
Pictured machine may include options and additional equipment.
2/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
CHARGING SYSTEM
2 ANFO vessels and work stand, 1 charging operator500 L stainless steel ANFO kettlePressure max. 7 barExtra air for chargingCharging hose 19 / 25 mm, 30 mPneumatic hand and foot control for chargingand blowingPneumatic control in basket to switch between vesselsEarth straps front and rearStorage area for packaged explosivesStorage boxes for primers and detonators
NBB3 BASKET BOOM
2-men basketLifting capacity of basket 500 kg = 340 kg + 2 personsBasket size 1.2 m x 1.8 m Boom lift –15º...+60ºBoom extension 4.0 mMax. Lifting height (basket floor) 9.1 mMax. Vertical reach 11 mBoom slew - 8º...+ 40ºMax. Lateral coverage 16 mDiesel start/stop (from the basket)Battery operated emergency pump
CONTROL SYSTEM
Integrated, seamless control and diagnostic systemNorSmart for all machine functions. NorSmart controls:• Carrier functions• Boom functions• Charging process• Safety requirements• Fault diagnostics• Data logging
ENGINE
Liquid cooled turbo charged CUMMINS QSF4.5,119kW/2300 rpm, TIER 4F approved Requires DEF (urea) and ultra-low sulphur diesel (ULSD) (max sulphur content < 15 ppm)
EXHAUST AFTER TREATMENT SYSTEM
EGR ( Exhaust Gas Recirculation), DOC (Diesel Oxidation Catalyst) and SCR (Selective Catalytic Reduction)
TRANSMISSION
Hydrostatic 4-wheel transmissionVariable piston pump 115 cm3
Variable piston motor 160 cm3
Separate stainless steel oil tank 110 L
AXLES
Planetary typeDana 223Rear end axle oscillation +/- 8°Boom end axle fixed
TYRES
12.00 – 20
PERFORMANCE
Max. Horizontal speed (horizontal tunnel) 25 km/hMax speed in 1:7 inclined tunnel 8 km/hMax. Tractive force 113 kN
BRAKES
Service brake; hydraulically powered two-circuitOil-immersed multi-dics brakes in both axles
Safety/Parking brake; spring-activated, hydraulicallyReleased, fail-safe-type brake. Brake test possibility in cabin
STEERING
Four-wheel steering as standardOrbitrol typeIncluding crabwalk
FUEL TANK
Capacity 140 LStainless steel
DEF TANK
Diesel Exhaust FluidCapacity 19 L
HYDRAULIC SYSTEM
Variable displacement pump system190 bar, 95 L/min/2200 rpmHydraulic oil tank capacity 130 LReturn oil filtration 10 μmIndication of level, filtration and temperature
24 VDC ELECTRICAL SYSTEM
Exposed components are min. IP65 stardard Battery 2 x 80 AhAlternator 80 AWire harness (self extinquishing) with tinned wires and wa-tertight conduitsLed driving lights• Front end LED lights 2 x 1300 lm• Rear end LED lights 2 x 1300 lmLED directional lights on front and rear sideLED working lights• 4pcs on cabin• 2pcs on carrier
DRIVER’S COMPARTMENT
Open cabin FOPS/ROPS approvedAir suspended driver’s seatSeat with retractable lap seat beltSide seating for the driver MID 070 S Multifunctional Display with: • Meters; e.g. speed, RPM, operating hours • Status indicators; e.g. fluid levels, temperatures,
pressures, alarms, faults
Technical specification
3/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
GREASING SYSTEM
Centralized grease fittings for the carrier
OTHER
12 kg hand held fire extinquisherStandard symbol labelsHydraulic front support legsHydraulic rear support legs
Technical specification Optional equipment
CHARGING SYSTEM
ANFO system:• 2 charging operators (N/A with one ANFO vessel sys-
tems)ANFO module:• 1 ANFO vessel and ANFO transport room• 1 ANFO vessel with 4 m3/min onboard compressorANFO vessel size:• 360 L• 720 LRadio controlled charging and blowing in basketANFO hose diameter:• For manual hose feeding 22 x 28 / 26,5 x 33,5 / 41,5 x 51 mm• For Mechanical hose feeding 26,5 x 33,5 / 30 x 38 mm / 34 x 44 mmANFO hose length:• 30/60 m
DRIVER’S CABIN
Enclosed cabin, FOPS/ROPSHVAC system
OTHER
Warning lights, 1 unit: • Rotating beacon; red • Rotating beacon; blue
4/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
CHARGING SYSTEM
Additional pneumatic charging controls: For toe holes and ground level charging workMechanical ANFO hose feeding for production chargingHose guide for upward production chargingDirecting pulley for downward production chargingWater for ANFO system: 35 L containerPressurized air after-cooler for a very high humidity
HIGH VOLTAGE SYSTEM
400V/50Hz power pack 690V/50Hz power pack1000V/50Hz power pack
COMPRESSOR
Hydraulically driven compressor 5 m3
FOR ENCLOSED CABIN
CD/Radio system
FOR NBB BASKET BOOM
Safety barSafety roof with hydraulic lift:Lifting capacity 400 kg = 240 kg + 2 personsSafety roof with hydraulic lift and slideLifting capacity 300 kg = 140 kg + 2 personsLED working lights on safety roof (2 pcs) 73 WBoom suspension
FIRE SUPPRESSION SYSTEM
Fogmaker: Manually actuated Fogmaker: Automatically actuatedAnsul: Manually actuatedAnsul: Automatically actuated
GREASING SYSTEM
Automatic lubrication system for carrier and lifter: Lincoln
OTHER
Fast fuel filling system: WigginsOil evacuation kit with sample pointsExtra hand held fire extinguisher (12 kg)Warning lights, 1 unit: • Rotating beacon; amber• Rotating beacon; red • Rotating beacon; blue • Strobe light; white
Text labels in: Fin / En / Por / Swe / Rus / Nor / Ger / Fra / Spa / ItaToolbox and maintenance tools2 wheel chocks with bracketsReversing cameraSpare wheel WLAN connection
Additional equipment
5/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
LTC services
RECOMMENDED SPARE PARTS FOR EARLY LIFE
Spare parts package: A complete package to make sure your machine runs with optimal uptime up to 1000 opera-tion hours*.
Includes periodical maintenance parts and most critical spare parts related to e.g.: - Engine (e.g. filters, belts)- Chassis (e.g. wiper blades, throttle pedal connector)- Hydraulics (e.g. filters)- Electrics (e.g. sensors, work lights, solenoid coils, contactors)- Boom (e.g. sliding parts, bearings, cylinders, seals, pins)- Charging equipment (e.g. charging hoses)- Compressor, if applicable (e.g. filters)
*) In challenging operating environment 1000h of usage may not be reached with this spare parts package.
EXTENDED WARRANTY
Extended warranty extends the standard warranty period (12 months or 2000 usage hours) up to total 24 months or 3000 usage hours, whichever is reached first.
ELECTRONIC MANUALS ON THE WEB
LinkOne electronic spare parts and instruction manuals
TRAINING AND EXPERTISE SERVICES
Available before and at the equipment delivery – and during the whole equipment life-time!
Product training: Operation and MaintenanceAutomation - NorSmartFoundation of electrics, hydraulics and mechanicsTrouble-shooting
Process & operator improvement audit for:Concrete sprayingChargingScaling
Audit services to improve:Performance, availability, maintenance & repair efficiency, safety, quality, environmental aspects
SERVICE CONTRACTS FOR
Spare parts supplyScheduled inspectionSupervisionScheduled maintenancePreventive maintenance
EQUIPMENT HAND-OVER SERVICES
Start-up training Commissioning
1. Operator training
1.1 Classroom training
No classroom training included in commissioning
General introduction and operation of machine ComprehensiveSafety instructions ComprehensiveUse of manuals ComprehensiveTechnical introduction of equipment ComprehensiveHands-on service and pre-operation checks ComprehensiveControls and driving (starting, driving, stopping, parking) ComprehensiveWork method Comprehensive
1.2 Practical trainingPre-operation checks Comprehensive BasicDriving, starting, stopping, parking Comprehensive BasicPreparing the machine for specific operation conditions Comprehensive Not coveredOperation Comprehensive BasicWashing the machine Comprehensive BasicTroubleshooting Comprehensive Basic
2. Maintenance and repair trainingGeneral operation of machines Comprehensive BasicSymbols of drawings and codes Comprehensive Not coveredUnderstanding hydraulic and electric schematics Comprehensive BasicControl systems Comprehensive BasicFunction of main components (depending on equipment) Comprehensive BasicLocations of components in the machine Comprehensive Not coveredPeriodical maintenance Comprehensive BasicTroubleshooting Comprehensive Not coveredUse of manuals Comprehensive BasicConnection of hydraulic and electrical equipment Comprehensive Not covered
6/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
Dimensions
SIDE VIEW
DIMENSIONS
Length 15250 mmWidth 2300/4250 mmHeight 3000 mm
TURNING RADIUS
Outer 9630 mmInner 3980 mm
WEIGHT
Operating 19 600 kg
SIDE VIEW
With options and additionals
TOP VIEW
7/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
BOOM REACH
Dimensions
8/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
Dimensions
BOOM REACH
9/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCA
TURNING RADIUS
Dimensions
10/10
Technical data sheet10010748210.01.2017
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
[email protected] www.normet.com
Normet reserves the right to change this specification without further notice.
Charmec RM 905 TCAMachine name and model Discription of power train
Norlifter Engine 97 kW 2500 1/minTransmission H1P-115Misc
0
10
20
30
40
50
60
70
80
90
100
110
120
0 5 10 15 20 25
Trac
tive
effo
rt k
N
Speed km/h
Tractive effort kN
3,5571014 0
10
20
30
40
50
60
70
80
90
100
110
120
5 10 15 20 25Machine weight tn
Gradeability kN
2020
15
10
GON
5
%) o/< 1/X
520
5
10
10
15 76
1525 4
303
5
30
2525
40 2,5
50 2
C:\Users\apa\Documents\TYÖ\TUOTTEET\Nostolaitteet\Rigid frame\Power line\HydstaVetovmacro.xlsm
Tractive efforts
CUMMINS QSF4.5 119kWPerformance curve
