View
1
Download
0
Category
Preview:
Citation preview
More than safety.
Bolts for safety guards
2
Quality, reliability, precision
Quality, reliability and precision are thehallmarks of our corporate philosophy.They represent concepts and valuesto which we feel totally committed. At EUCHNER, quality means that allour employees take personal respon-sibility for the company as a wholeand, in particular, for their own field ofwork. This individual commitment toperfection results in products whichare ideally tailored to the customers’needs and the requirements of themarket. After all: our customers andtheir needs are the focus of all ourefforts. Through efficient and effectiveuse of resources, the promotion ofpersonal initiative and courage in find-ing unusual solutions to the benefit ofour customers, we ensure a high levelof customer satisfaction. We familiar-ize ourselves with their needs, require-ments and products and we learnfrom the experiences of our cus-tomers’ own customers.
EUCHNER – More than safety.
Quality – made by EUCHNER
More than safety.Around the world – the Swabianspecialists in motion sequencecontrol for mechanical and sys-tems engineering.
EUCHNER’s history began in 1940 withthe establishment of an engineeringoffice by Emil Euchner. Since thattime, EUCHNER has been involved inthe design and development of switch-gear for controlling a wide variety ofmotion sequences in mechanical andsystems engineering. In 1953, EmilEuchner founded EUCHNER + Co., amilestone in the company’s history. In1952, he developed the first multiplelimit switch – to this day a symbol ofthe enterprising spirit of this family-owned company.
Automation – Safety – ManMachine
Today, our products range fromelectromechanical and electroniccomponents to complex system solu-tions. With this wide range of productswe can provide the necessary tech-nologies to offer the right solution forspecial requirements – regardless ofwhether these relate to reliable andprecise positioning or to componentsand systems for safety engineering inthe automation sector.EUCHNER products are sold through aworld-wide sales network of compe-tent partners. With our closeness tothe customer and the guarantee ofreliable solutions throughout theglobe, we enjoy the confidence of cus-tomers all over the world.
Emil Euchner, the company’s founder andinventor of the multiple
limit switch, circa 1928.
Safety
3
Table of contents
General 4
Standard bolts for safety guards 5
Bolts for safety switches series CES 6
Bolts for safety switches series NM 8
Bolts for safety switches series NP 9
Bolts for safety switches series NZ 10
Bolts for safety switches series NZ and TZ 13
Bolts for safety switches series TP 16
Bolts for safety switches series TX 18
Bolts for safety switches series TZ 19
Bolts with escape release from the danger area 21
Bolts for safety switches series CES 22
Bolts for safety switches series NZ 23
Bolts for safety switches series NZ and TZ 24
Bolts for safety switches series TP 27
Bolts for safety switches series TZ 28
Adapter for bolts 29
Bolts for Safety Guards
Accessories
Techn. Release 02-10/04
4
Bolts for Safety Guards
General
Bolts for Safety Guards
According to EN 292-2 movable safety guards must be equipped with an interlocking device, with or without guard locking.
Here it must be ensured that
dangerous machine functions are stopped as soon as the safety guard is no longer in the closed position
dangerous machine functions are not started when the movable safety guard is closed.
When the EUCHNER safety door bolts are opened intentionally, the actuator mounted on the handle is pulled out of the safety switchactuator head. The opening of the normally closed contacts in the safety switch fulfils the requirements of the safety standard givenabove and permits access to the protected space.
In addition to the standard bolts (see page 5), Euchner also offers bolts with escape release (see page 21) in accordance withthe EC Machinery directive. These bolts facilitate opening of the locked safety guard from within the hazardous area to allowoperating personnel to escape and prevent them being accidentally locked in the danger area.
In the past, the bolts for safety guards were commonly produced in internal company locksmiths’ shops at considerable expense.However, today standard solutions are preferred for economic reasons, especially in the car industry. EUCHNER has responded tocurrent customer demands with the introduction of the bolts for safety guards.
5
Bolts for Safety Guards
Bolts for safety guards offer important advantages:
Bolts provide mechanical guard locking, i.e. the monitoring circuit cannot be opened unintentionally by moving the hinged door. Accidental stoppage of the machine is prevented
The actuator is accurately mechanically guided into the actuating head of the safety switch. In this way it is ensured that theactuator is correctly inserted in the head, even with incorrectly adjusted doors.
Damage to the safety switch is prevented The actuator is protected
If the safety doors are shaken, the force is transmitted to the mechanically strong bolt and not to the safety switch. Safety switches and actuators are thus protected against damage
By using bolts, persons who must enter hazardous areas, e.g. for servicing and setup work, can protect themselves. Byattaching one or more simple padlocks to the bolt in the open position, the movable safety guards cannot be closed and thus thedangerous states cannot be triggered.
The operator is protected
Standard aluminum profiles are frequently used for safety guards. The bolts are particularly easy to fit here. Optimum adaptation of the bolts to the market standard
Bolts are available for all EUCHNER safety switches Extensive product range Products refined in every detail
Standard bolts for safety guards
6
Bolts for Safety Guards
62
69
8
30
84 70
14
1101540
20
12
58 135
42 60
CES
Dimension drawingBolt CES-A-A for doors hinged on the right or left
Door hinged on the right
FeaturesEasy mounting of the read head on the bra-cket for the bolt tongueUniquely coded actuator (one-off)
Absolutely secure against tamperingBall detent mechanism in closed bolt position
Protection against vibration
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionSymmetrical design for doors hinged on theright or leftNo additional door handle necessary
NotesCES actuator integrated in the bolt tongueOrder read head and evaluation unit sepa-ratelyOther bolt types (e.g. with mechanical detentmechanism in closed bolt position) on request
Ordering tableArticle Order No.Bolt CES-A-A for doorshinged on the right or left 076 487
Door hinged on the left
Door hinged on the rightSafety guard frame (40 x 40)
for M6 screwfor M6 screw
Stop screwlocked
for M6 screw for M6screw
Safety guard frame (40 x 40)Door hinged on the left
Bolt tongue
Bracket
Bolt CES-A-A
For non-contact safety switches CES-A-ABA... and CES-A-AEA...In combination with read head CES-A-LNA...
7
Bolts for Safety Guards
42
135
58
20
40 15 110
14
170
190
8
69
10
40
62
1260
Bolt CES-A-C
For non-contact safety switches CES-A-C...Connection to safety circuit using M12 plug connector
Dimension drawingBolt CES-A-C for doors hinged on the right or left
Door hinged on the right
FeaturesEasy mounting of the read head on the bra-cket for the bolt tongueUniquely coded actuator (one-off)
Absolutely secure against tamperingBall detent mechanism in closed bolt position
Protection against vibration
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionSymmetrical design for doors hinged on theright or leftNo additional door handle necessary
NotesCES actuator integrated in the bolt tongueOrder read head and evaluation unit sepa-ratelyOther bolt types (e.g. with mechanical detentmechanism in closed bolt position) on request
Ordering tableArticle Order No.Bolt CES-A-C for doorshinged on the right or left 082 220
Door hinged on the left
Door hinged on the right
Safety guard frame (40 x 40)
Detent mechanismagainst accidentalopening (vibration)
for M6 screwfor M6 screw(both sides)
Safety guard frame (40 x 40)
Door hinged on the left
8
Bolts for Safety Guards
AA
6
168
180
15 15 10 15
115
726 4060
3032
4
40
74
16
34 80 31
A-A 2:1
Dimension drawingBolt NM for doors hinged on the right or left(Diagram shows door hinged on the right)
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionSymmetrical design for doors hinged on theright or leftNo additional door handle necessaryBolt with detent mechanism in opened posi-tionThrough hole on the bolt permits attachmentof padlocks
NotesActuator and switch bracket includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NM for doorshinged on the left or right, 077 233actuator and switch bracketincludedSwitch bracket NMindividual 077 245
for M6 screw (alsosuitable for M5)
Guard
for M5 screw
for M4 screw (2 screws M4 x 30 included)
for M6 screw (also suitable for M5)
Guard frame madeof aluminum profile
Guard frame madeof aluminum profile
Door hinged on the right
Section A-ABolt engages inopen position
Bolt NM
For safety switches NM..VZA
9
Bolts for Safety Guards
Dimension drawingBolt NP for doors hinged on the right or left
Detail AFeatures
Easily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionSymmetrical design for doors hinged on theright or leftNo additional door handle necessaryAutomatic detent mechanism when bolt ismoved to the locked position (only on 1 NP/TP bolt version)Detent mechanism prevents unintentionalopening of the hinged doorSlot on the bolt permits attachment of pad-locksIdentical bolt for NP...AS and TP...A safetyswitches
NotesNP switch bracket is only suitable for typeseries NP...ASActuator includedPlease order safety switch and switch bra-cket separately
Ordering tableArticle Order No.Bolt O NP/TPwithout detent mechanism 073 535
Bolt 1 NP/TPwith detent mechanism, 073 5361 x detent mechanismwhen closedSwitch bracket NP 073 538
Afteradjustmentconnectpositively
Safety guardframe(40x40)
Approachdirection
Door hinged on the left
Bolt NP
For safety switches NP...AS
104
4762
40
1912
5
151,
5
∅ 6,2
140 37
2020
6±1
(46 ±1 )
28,5
114
10
25
75
6,2
11,5
Detail A
10
Bolts for Safety Guards
Dimension drawingBolt NZ-A for doors hinged on the right
Bolt NZ-C for doors hinged on the left
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionEasy to useDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ-Afor doors hinged on the right
057 734
Bolt NZ-Cfor doors hinged on the left
057 735
Safety switch NZ.VZ...Approach direction A
for M6 screw
Safety switch NZ.VZ...Approach direction C
for M6 screw
for M6 screw
for M6 screw
Safety guardframe (40 x 40) Door hinged on the right
Bolt NZ..
For safety switches of type series NZ.VZ and NZ.VZ.VS
11
Bolts for Safety Guards
ca.25
1)
6042
110
20
1540
20
30
18
14
69
62
M5 (4x)
30
6860
3860
13558
8
255
7630
233
33 10
(16)
Dimension drawingBolt NZ-AR2 for doors hinged on the right
FeaturesBolt NZ-.B engages in open and closedposition
Prevents accidental opening and closingof the bolt
Bolt NZ-.R2 engages in open and closedposition. Unlocked by pulling the detent knobupward
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionEasy to useDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ-ABfor doors hinged on the right
083 890
Bolt NZ-CBfor doors hinged on the left
083 892
Bolt NZ-AR2for doors hinged on the right
078 455
Bolt NZ-CR2for doors hinged on the left
078 456
Bolt NZ..
For safety switches series NZ.VZ and NZ.VZ.VSBolt NZ-.B with ball detent mechanismBolt NZ-.R2 with detent knob
Bolt NZ-CB
for M6 screw for M6 screw
for M6 screw
Stop screw locked
Safety switch NZ...Approach direction A
Door hinged on the right
for M6 screw
Safety guard frame (40 x 40)
1) Bolt with detent mechanismWhen the bolt is open, the knobengages and prevents unintendedclosing.When the bolt is closed, the knobengages and prevents unintendedopening.Unlocked by pulling the detent knobupward.
12
Bolts for Safety Guards
(16
)
3838
6060
7676
370
390
10
30
M5
4015110
4260
14
5813562
20
7
8
33
69
Dimension drawingBolt NZ-AC (without escape release)for doors hinged on the right or left
FeaturesOne bolt for 2 safety switches
A higher safety category (e.g. category 4)is achieved
Bolt can be used for doors hinged on theleft or right
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesActuator includedPlease order safety switch separatelyThe function of the NZ-ACF bolt with escaperelease is the same as the function of the NZ/TZ-ACF bolt (see page 26)
Ordering tableArticle Order No.Bolt NZ-AC(without escape release) 076 188for doors hingedon the right or leftBolt NZ-ACF(with escape release) 091 368for doors hingedon the right or left
Safety switch NZ.VZ...Approach direction A
Safety switch NZ.VZ...Approach direction A
Door hinged on the left
Safety guard frame(40 x 40)
for M6 screw
for M6 screw
Stop screw locked
Bolt NZ-AC
For 2 safety switches of type series NZ.VZ on one bolt
for M6 screw
13
Bolts for Safety Guards
20
(4x)
100
M5
6
115
(3x)
8 40
121515
52140
18 32
10
38,5 64
5,5
5 -3
52 +4
25
13
266
10
20
20
M5 (4x)
20 100
8
27 0-3
20
8
65
10
55
Dimension drawingBolt NZ/TZ-G1 for doors hinged on the right or left
FeaturesThe hand lever can be permanently set to20 rotary positions (in 18° increments)On bolt NZ/TZ-G1, actuating pin on bottom
Safety switch fastened as shown inillustration
On bolt NZ/TZ-G2, actuating pin on topSafety switch fastened rotated by 180°
After the door is opened, the actuator isautomatically withdrawn into the bolt by abuilt-in return spring
The operator is protectedWhen the door is open there is no risk ofinjury due to protruding actuatorThe actuator is protectedWhen hinged doors are closed it is ensuredthat the actuator is not used as an endstop
FeaturesThree holes enable padlocks to be attached
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ/TZ-G1 for doorshinged on the right or left 028 358actuating pin on bottomBolt NZ/TZ-G2 for doorshinged on the right or left 028 360actuating pin on top
Bolt NZ/TZ-G.
For safety switches of type series NZ.VZ, NZ.VZ.VS and TZ...Bolt with hand lever
Bolt NZ/TZ-G2
Safety switch NZ.VZApproach direction A
deep 1)
deep 1)
1) Bolt fastening
14
Bolts for Safety Guards
20
(4x)
100
M5
6
115
(3x)
8 40
121515
52140
18 32
10
38,5 64
5,5
5 -3
52 +4
25
13
266
10
30
42
20
20
M5 (4x)
20 100
8
27 0-3
20
8
Dimension drawingBolt NZ/TZ-S1 for doors hinged on the right and left
FeaturesOn bolt NZ/TZ-S1, actuating pin on bottom
Safety switch fastened as shown in illust-ration
On bolt NZ/TZ-S2, actuating pin on topSafety switch fastened rotated by 180°
After the door is opened, the actuator isautomatically withdrawn into the bolt by abuilt-in return spring
The operator is protectedWhen the door is open there is no risk ofinjury due to protruding actuatorThe actuator is protectedWhen hinged doors are closed it is ensuredthat the actuator is not used as an endstop
FeaturesThree holes enable padlocks to be attached
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ/TZ-S1 for doorshinged on the right or left 028 357actuating pin on bottomBolt NZ/TZ-S2 for doorshinged on the right or left 028 359actuating pin on top
Bolt NZ/TZ-S.
For safety switches series NZ.VZ, NZ.VZ.VS and TZ...Bolt with ball handle
Safety switch NZ.VZApproach direction A
Bolt NZ/TZ-S2
deep 1)
deep 1)
1) Bolt fastening
15
Bolts for Safety Guards
Dimension drawingBolt NZ/TZ-Z for doors hinged on the right or left
FeaturesBolt knob engages in open and closed posi-tion. The actuator can be inserted in thesafety switch by pulling the knurled knob
FeaturesThree holes enable padlocks to be attached
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ/TZ-Z for doorshinged on the right or left 057 770
Bolt NZ/TZ-Z
For safety switches series NZ.VZ, NZ.VZ.VS and TZ...Bolt with knurled knob
lock
ed
unlo
cked
M5, 12deep
Fastening hole
Knurledknob
16
Bolts for Safety Guards
60
62
M5 (4x)
42
1101540
20
18
30
13558
14
69
8
33 10
(16)
30
76
3514
4
283
305
20
62 135 58
69
8
3310
(16)
Dimension drawingBolt TP-A for doors hinged on the right
Bolt TP-C for doors hinged on the left
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionEasy to useDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment ofpadlocks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt TP-A for doorshinged on the right 084 430
Bolt TP-C for doorshinged on the left 084 432
Bolt TP
For safety switches series TP..For safety switches series GP..
for M6 screw for M6 screw
for M6 screw
Stop screwlocked
Safety switch TP...Approach direction A
Door hinged on the right
for M6 screw
Safety guard frame (40 x 40)
Door hinged on the leftSafety guard frame (40 x 40)
17
Bolts for Safety Guards
Dimension drawingBolt TP for doors hinged on the right or left
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionSymmetrical design for doors hinged on theright or leftNo additional door handle necessaryAutomatic detent mechanism when bolt ismoved to the locked position (only on bolt1 NP/TP version)Detent mechanism prevents unintentionalopening of the hinged doorSlot on the bolt permits attachment ofpadlocks
NotesSwitch bracket TP is only suitable for seriesTP...AIdentical bolt for safety switches seriesNP...AS and TP...AActuator includedPlease order safety switch and switch bra-cket separately
Ordering tableArticle Order No.Bolt O NP/TPwithout detent mechanism 073 535
Bolt 1 NP/TPwith detent mechanism, 073 5361 x detent mechanismwhen closedSwitch bracket TP 073 539
Bolt TP
For safety switches series TP...A
Detail A
Afteradjustmentconnectpositively
Safetyguard frame(40x40)
Approachdirection
Door hinged on the left
104
40
25,5
217 25
0∅ 6,2
140 37
2020
6±1
(46 ±1 )
34,5
4762
114
10
25
75
6,2
18
Detail A
18
Bolts for Safety Guards
40 15
42 60
6213558
20 20
14
1830
85
46
30
110
21,5
9,5
8
73,5 41
,5
M5(4X)
318
340
134
58
Bolt TX
For safety switches series TX..For safety switches TX...-C1991 with escape release
Dimension drawingTX bolt (without escape release) for doors hinged on the right
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionNo additional door handle necessarySlot on the bolt tongue permits attachmentof padlocks
NotesActuator and switch bracket includedPlease order safety switch separatelyThe function of the bolt TX...F with escaperelease is the same as the function of thebolt TP...F (see page 27)
Ordering tableArticle Order No.Bolt TX-A(without escape release) 082 990for doors hinged on the rightBolt TX-C(without escape release) 082 991for doors hinged on the leftBolt TP-AF(with escape release) 085 392for doors hinged on the rightBoltTX-CF(with escape release) 085 393for doors hinged on the left
for M6 screwfor M6screw
for M6 screw
Safety screws
Safety guard frame (40x40)Doors hinged on the right
for M6screw
19
Bolts for Safety Guards
Dimension drawingBolt TZ-A for doors hinged on the right
Bolt TZ-C for doors hinged on the left
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionEasy to useDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt TZ-Afor doors hinged on the right 057 736
Bolt TZ-Cfor doors hinged on the left 057 737
Safety switch TZ...Approach direction A
for M6 screw
Safety switch TZ...Approach direction C
for M6screw
for M6 screw
for M6 screw
Safety guard frame (40 x 40) Door hinged on the right
Bolt TZ..
For safety switches series TZ...
20
Bolts for Safety Guards
Dimension drawingBolt TZ-A for doors hinged on the right
Bolt TZ-C for doors hinged on the left
FeaturesSuitable for use in the chemical and food-stuff industriesScrew material stainless steel V2AHandle material polypropyleneSlide strip material polyethylene
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionEasy to useRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt TZ-A-NIROfor doors hinged on the right 079 798
Bolt TZ-C-NIROfor doors hinged on the left 079 799
Safety switch TZ...Approach direction A
for M6 screw
Safety switch TZ...Approach direction C
for M6screw
for M6 screw
for M6 screw
Safety guard frame (40 x 40) Door hinged on the right
Bolt TZ..
For safety switches series TZ...Stainless steel bolt, 1.4301
Identical to bolt TZ-A, however without yellow coating
21
Bolts for Safety Guards
A
1
2
Bolts with escape release from the danger area
Figure 1 shows a TZ... safety switch in combination with a TZ-.F bolt with escaperelease. With this combination, the escape release can be operated by means of apushbutton (Figure 1, A) and a lever (Figure 1, B).With the pushbutton pulled out, the safety switch functions normally and the interlockingprocess can be triggered by the operator. If there is someone on the hazardous areaand the door is accidentally closed and locked, the operator could be at serious risk.
By pressing the pushbutton (escape release, Figure 2, 1), the person locked in cantrigger the safety switch’s mechanical release. The solenoid monitoring contacts arepositively opened. The safety circuit is interrupted and a command to stop the machineoperation is triggered.A lever (Figure 2, 2) facilitates removal of the actuator from the safety switch so thatthe exit door can be opened from within the danger area.
In order to prevent anyone being locked into the danger area, the following precautionscan be taken when using the TZ-.F bolt.
Pushbutton with lock (Figure 1, A)The pushbutton (escape release) on the safety switch can only be reset using therelated key. The key is only to be accessible for authorized personnel. In this waymisuse of the escape release is prevented.
Padlock (Figure 3, C)The bolt tongue has a slot which holds up to three padlocks. When service work isbeing carried out, the doors cannot be locked thus the machine cannot be started bythird parties.
Detent knob (Figure 3, D)Operators with a tendency to monitor the processes closely and on occasion enterthe machine pose a high level of risk.In order to take positive action to prevent anyone locking themselves in a dangerarea, the actuator can only be inserted in the safety switch from the outside whilepulling the detent knob.
Bolts with escape release offer the following important advantages:
Bolts with escape release allow the operator to open the closed safety guard and escape from the danger area. The operator is protected in an emergency
If there is a risk that someone may be accidentally locked in an accessible danger area, the EU Machinery directive stipulates:„Machinery must be designed, constructed or fitted with a means of preventing an exposed person from being enclosed within it or,if that is impossible, with a means of summoning help“.In the case of safety switches with a guard locking, the German trade association recommends the use of a manually operated escaperelease in accordance with BGI 575. With the escape release, the guard-locking device can be disabled from the inside in case ofdanger. The escape release for the safety switch must be within easy reach inside the danger area and must be operable without theneed for any other tools.
Figure 1: Safety switch with bolt (rear view)
Figure 2: Pushbutton and lever activated
Figure 3: Padlock and detent knob
D
C
B
22
Bolts for Safety Guards
69
8
30
84 70
1101540
20
12
58 135
42 60 1512
0
1)
ca.2562
100 85
9
120
1)
10085
Dimension drawingBolt CES-A-A/F for doors hinged on the right or left
Door hinged on the right
FeaturesEasy mounting of the read head on the bra-cket for the bolt tongueUniquely coded actuator (one-off)
Absolutely secure against tamperingBolt with detent mechanism
When the bolt is open, the knob engagespreventing unintended closing
Ball detent mechanism in closed bolt positionProtection against vibration
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionSymmetrical design for doors hinged on theright or leftNo additional door handle necessary
NotesCES actuator integrated in the bolt tongueOrder read head and evaluation unit separately
Ordering tableArticle Order No.Bolt CES-A-A/F for doorshinged on the right or left 086 173
Bolt CES-A-A/F
For non-contact safety switches series CES-A-ABA...and CES-A-AEA...Lever for escape release from the danger areaIn combination with read head CES-A-LNA...
Door hinged on the left
Door hinged on the rightSafety guard frame (40 x 40)
for M6screw
for M6 screw
Stop screwlocked
for M6 screwfor M6screw
Safety guard frame (40 x 40)
Door hingedon the left
Bolt tongue
Bracket
1) Bolt with detent mechanismWhen the bolt is open, the knobengages preventing unintendedclosing.Unlocked by pulling the detentknob upward.
23
Bolts for Safety Guards
9085
(16)
ca.25
1)
60 42
110
20
15 40
20
30
18
1512
0
14
69
62
M5 (4x)
30
6860
3860
135
255
7630
233
7
33
8
58
Dimension drawingBolt NZ-CF for doors hinged on the left
FeaturesBolt with detent mechanism
When the bolt is open, the knob engagesto prevent unintended closing
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment ofpadlocks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ-AFfor doors hinged on the right 078 451
Bolt NZ-CFfor doors hinged on the left 078 452
Bolt NZ-.F
For safety switches series NZ.VZLever for escape release from the danger area
for M6 screw for M6 screw
for M6 screw
Stop screw locked
Safety switch NZ...Approach direction C
Door hingedon the left
for M6 screw
1) Bolt with detent mechanismWhen the bolt is open, the knobengages to prevent unintendedclosing.Unlocked by pulling the detent knobupward.
Cut-outnecessary onthe safety door
Safety guard frame(40 x 40)
24
Bolts for Safety Guards
20
(4x)
100
M5
6
115
(3x)
8 40
121515
52
18 32
10
38,5 64
5,5
5 -3
52 +4
25
13
266
10
20
20
M5 (4x)
8
27 0-3
20
8
65
10
140
20 100
30
42,5 43 8
40
70
55
Dimension drawingBolt NZ/TZ-G1/AF for doors hinged on the right
FeaturesThe hand lever can be permanently set to20 rotary positions (in 18° increments)After the door is opened, the actuator isautomatically withdrawn into the bolt by abuilt-in return spring
The operator is protectedWhen the door is open there is no risk ofinjury due to protruding actuatorThe actuator is protectedWhen hinged doors are closed it is ensuredthat the actuator is not used as an endstop
FeaturesThe lever for the escape release only enablesthe doors to be opened from inside thedanger areaThree holes enable padlocks to be attached
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ/TZ-G1/AFfor doors hinged on the right 079 788
Bolt NZ/TZ-G1/CFfor doors hinged on the left 079 787
Bolt NZ/TZ-G1/.F
For safety switches series NZ.VZ, TZ...-C1684,TZ...-C1815 and TZ...-C1828Lever for escape release from the danger areaBolt with hand lever
Safety switch NZ.VZApproach direction A
deep
deep 1)
1) Bolt fastening
25
Bolts for Safety Guards
20
(4x)
100
M5
6
115
(3x)
8 40
121515
52
140
18 32
10
38,5 64
5,5
5 -3
52 +4
25
13
266
10
30
4220
20
M5 (4x)
20 100
8
27 0-3
20
8
30
42,5 43 8
40
70
Dimension drawingBolt NZ/TZ-S1/AF for doors hinged on the right
FeaturesAfter the door is opened, the actuator isautomatically withdrawn into the bolt by abuilt-in return spring
The operator is protectedWhen the door is open there is no risk ofinjury due to protruding actuatorThe actuator is protectedWhen hinged doors are closed it is ensuredthat the actuator is not used as an endstop
FeaturesThe lever for the escape release only enablesthe doors to be opened from inside thedanger areaThree holes enable padlocks to be attached
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ/TZ-S1/AFfor doors hinged on the right 079 786
Bolt NZ/TZ-S1/CFfor doors hinged on the left 079 785
Bolt NZ/TZ-S1/.F
For safety switches series NZ.VZ, TZ...-C1684,TZ...-C1815 and TZ...-C1828Lever for escape release from the danger areaBolt with ball handle
Safety switch NZ.VZApproach direction A
deep 1)
deep 1)
1) Bolt fastening
26
Bolts for Safety Guards
18
100
8925
ca.25
33
8(2
0)
731)
20
420
400
100
74
36
14
110 15 40
M5
30
10
76
6038
60 421512
0
14
9085
Dimension drawingBolt NZ/TZ-ACF for doors hinged on the left
FeaturesOne bolt for 2 safety switches (NZ and TZwith guard locking)
A higher safety category (e.g. category 4)is achieved
Bolt with detent mechanismWhen the bolt is open, the knob engagesto prevent unintended closing
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt NZ/TZ-ACF for doorshinged on the right or left 083 900
Bolt NZ/TZ-ACF
For safety switches series NZ.VZ, TZ...-C1684,TZ...-C1815, TZ...-C1828 and NZ.VZBolt for 2 safety switches (NZ and TZ)Lever for escape release from the danger area
for M6 screw
for
M6
scre
w
Stop
scr
ew lo
cked
Safety switch NZ..VZApproach direction A
Door hingedon the left
Safety guard frame (40 x 40)
Safety switch TZ...Approach direction C
1) Bolt with detent mechanismWhen the bolt is open, theknob engages to preventunintended closing.Unlocked by pul l ing thedetent knob upward.
27
Bolts for Safety Guards
60
M5 (4x)
42
1101540
20
18
30
14
30
74
3514
4
283
305
20
ca.25
1)
1512
0
171,
5
69
6213558
8
33 10
(16)
90 85
Dimension drawingBolt TP-AF for doors hinged on the right
FeaturesBolt with detent mechanism
When the bolt is open, the knob engagesto prevent unintended closing
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesThe bolt is only suitable for safety switchesseries TP...AActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt TP-AFfor doors hinged on the right 086 186
Bolt TP-CFfor doors hinged on the left 086 188
Bolt TP-.F
For safety switches with escape release TP...A.-C1743Lever for escape release from the danger area
for M6 screw for M6 screw
for M6 screw Stop screwlocked
Safety switch TP...Approach direction A
Door hingedon the right
for M6 screw
Safety guard frame (40 x 40)
1) Bolt with detent mechanismWhen the bolt is open, theknob engages to preventunintended closing.Unlocked by pulling thedetent knob upward.
28
Bolts for Safety Guards
100
8925
18
100M5
(4x)
60
62
42
110
20
15 40
20
30
255
233
135 58
36
74
18
ca.25
15
1)
120
14
73
8
3311
(20)
B
D
9085
Dimension drawingBolt TZ-CF for doors hinged on the left
FeaturesBolt with detent mechanism
When the bolt is open, the knob engagesto prevent unintended closing
FeaturesEasily fitted to standard aluminum profilesand machine covers with screw connectionDistinctive yellow color for easy recognitionRobust version for heavy doorsNo additional door handle necessarySlot on the bolt permits attachment of pad-locks
NotesActuator includedPlease order safety switch separately
Ordering tableArticle Order No.Bolt TZ-AFfor doors hinged on the right 076 200
Bolt TZ-CFfor doors hinged on the left 076 199
for M6 screw for M6 screw
for M6 screw
Stop screw locked
TZ... safety switchApproach direction C
Door hingedon the left
for M6 screw
1) Bolt with detent mechanismWhen the bolt is open, theknob engages to preventunintended closing.Unlocked by pulling the detentknob upward.
Cut-outnecessary onthe safety door
Safety guard frame (40 x 40)
Bolt TZ-.F
For safety switches series TZ...-C1684, TZ...-C1815 andTZ...-C1828 with escape releaseLever for escape release from the danger area
29
Bolts for Safety Guards
233
255
25
40
2,5
15
42 60
20
35
Dimension drawing(Adapter set in gray)
FeaturesUsing the adapter set the bolts NZ... andTZ... can be fastened to aluminum profiles(Bosch EcoSafe)The adapter set is only suitable for protec-tion cross-beams 45x45 mm in combinati-on with safety doors 30x30 mmSimple screw mountingSymmetrical design for doors hinged on theright or left
Notes4 fastening screws for bracket includedOrder bolt and safety switch separately
Ordering tableArticle Order No.Adapter NZ/TZ 45/30 079 033
Adapter NZ/TZ..
For bolts for safety switches series NZ..., TZ...In combination with Bosch EcoSafe 45x45, 30x30
for M6screw
for M6screw
for M6 screw
for M6 screw Order bolt and safety switch separately
Order bolt and safety switch separately
Safety guardframe (45x45)
Door frame (30x30)
Door hinged on the right
Accessories
Dimension drawing FeaturesMaterial: plastic, reinforced polypropylene(PP)Color: black, matTemperature resistance up to 100 °C
NotesScrews not included
Ordering tableArticle Order No.Bolt handle/V5(qty. 5 per packet)
093 500
Bolt handle
Replacement handle for EUCHNER bolts
2615
117 ±0,5
8,5
41
8,5
134
∅ 13,5
30
JapanSolton Co. Ltd.2-13-7, Shin-YokohamaKohoku-ku, YokohamaJapan 222-0033Tel. +81 (0) 45 4 71 77 11Fax +81 (0) 45 4 71 77 17sales@solton.co.jp
KoreaEUCHNER Korea Ltd.RM 810 Daerung Technotown#448 Gasan-DongKumchon-Gu, SeoulTel. +82 (02) 2107 3500Fax +82 (02) 2107 3999sijang@euchner.co.kr
MexicoSEPIA S.A. de C.V.Maricopa # 10302, Col. Napoles.Del. Benito JuarezMEX-03810 Mexico D:F:Tel. +52 (5) 6822 347Fax +52 (5) 5367 787sepia@prodigy.net.mx
New ZealandWAF, W. Arthur Fisher11 Te Apunga PlaceMt. WellingtonAukland, New ZealandTel. +64 (0) 9 270 0100Fax +64 (0) 9 270 0900chrisl@waf.co.nz
NorwayELIS ELEKTRO ASJericoveienN-1067 OsloTel. +47 (22) 90 56 70Fax +47 (22) 90 56 71post@eliselektro.no
PolandELTRONpl. Wolnosci 7 BPL 50-071 WroclawTel. +48 (0)71 343 97 55Fax +48 (0)71 343 96 64LP@eltron.pl
PortugalPAM – Serviços TécnicosIndustriais, LdaRua Senhora da Alegria 188P-4785 Alvarelhos STSTel. +3 51 (0) 22 98 27 518Fax +3 51 (0) 22 98 27 519pam@mail.telepac.pt
SingaporeSENTRONICSAutomation and Marketing Pte LtdBlk 3021 Ubi Avenue 2# 03-169SGP-Singapore 408897Tel. +65/6744 8018Fax +65/6744 1929sentronics@pacific.net.sg
RRRRRepreprepreprepreeeeesentsentsentsentsentation intation intation intation intation internernernernernationationationationationalalalalal
AustraliaMicromax Pty. Ltd.PO Box 1238AUS-WollongongNSW Australia 2500Tel. +61 (0) 2 4271 1300Fax +61 (0) 2 4271 8091micromax@micromax.com.au
AustriaEUCHNER Ges. mbHSüddruckgasse 4A-2512 TribuswinkelTel. +43 (0) 22 52 4 21 91Fax +43 (0) 22 52 4 52 25info@euchner.at
BeneluxEUCHNER (BENELUX) B.V.Postbus 119NL-3350 AC PapendrechtTel. +31 (0) 78 6 15 47 66Fax +31 (0) 78 6 15 43 11info@euchner.nl
BrazilEUCHNER Itda.Av. Prof. Luiz Ignacio AnhaiaMello no. 4387S. LucasSão Paulo SP BrasilCEP 03295-000Tel. +55 (0) 11 69 18-22 00Fax +55 (0) 11 61 01-06 13euchner@euchner.com.br
CanadaIAC & Associates Inc.1925 Provincial RoadWindsor, Ontario N9A 6J3Tel. +1 (5 19) 966-3444Fax +1 (5 19) 966-6160sales@iacnassociates.com
ChinaKnowhow I&C Co.C-2204 Webok Times CenterNo. 17 Zhongguancun NandajieBeijing, 100081Tel. +86 10 8857 8899Fax +86 10 8857 8989info@knowhow.cn
Czech RepublicAmtek spol s.r.o.Elektronicke SoucastkyAutomatizacni TechnikaPresne strojìrenstviVidenská 125CZ-619 00 BrnoCeská republikaTel. +420 5 47 12 55 70Fax +420 5 47 12 55 56amtek@amtek.cz
DenmarkRobotek EL & TEKNIK A/SBlokken 31, Postboks 30DK-3460 BirkerødTel. +45 44 84 73 60Fax +45 44 84 41 77info@robotek.dk
Eastern EuropeHera Handels Ges. mbHHauptstraße 61A-2391 KaltleutgebenTel. +43 (0) 22 38 7 75 18Fax +43 (0) 22 38 7 75 28hera@telering.at
FinlandSähkölehto OyLehto & Co.Holkkitie 14FIN-00880 HelsinkiTel. +358 (0) 9 774 6420Fax +358 (0) 9 759 1071office@sahkolehto.fi
FranceEUCHNER France S.A.R.L.Immeuble Le ColoradoERAGNY PARCRue Rosa LuxembourgParc d'affaires des BellevuesF-95610 ERAGNY sur OISETel. +33 (0) 1 39 09 90 90Fax +33 (0) 1 39 09 90 99info@euchner.fr
Hong KongImperial Engineers &Equipment Co. Ltd.Unit B 12th FloorCheung Lee Industrial Building9 Cheung Lee StreetHK-Chaiwan, Hong KongTel. +8 52/28 89 02 92Fax +8 52/28 89 18 14ieeclhk@netvigator.com
HungaryEUCHNER Ges.mbHMagyarországi FióktelepH-2045 TörökbálintTópark Ipari park 3301/28Feketerét u. 1.Tel. +36/23/428 374Fax +36/23/428 375info@euchner.hu
IndiaTeknic Controlgear PVT Ltd.703, Madhava,Bandra Kurla ComplexBandra EastIND-Mumbai 400051Tel. +91-80-23 61 9348
+91-80-23 61 7867Fax +91-80-23 61 8607teknic@vsnl.com
IranINFOCELL IRAN Co.# 84, Manoucheri Ave.,P.O. Box 81655-861, Isfahan, IRANTel. +98 311 221 1358Fax +98 311 222 6176info@infocell-co.com
ItalyTRITECNICA S.r.l.Viale Lazio 26I-20135 MilanoTel. +39 02 54 194-1Fax +39 02 55 01 04 74info@tritecnica.it
SloveniaSMM d.o.c.Production Systems Ltd.Jaskova 18SLO-2001 MariborSloveniaTel. +386 (0)2 450 23 26Fax +386 (0)2 462 51 60franc.kit@smm.si
SpainEUCHNER, S.L.Gurutzegi 12 - Local 1Polígono BelartzaE-20018 San SebastiánTel. +34 (9 43) 31 67 60Fax +34 (9 43) 31 64 05euchner@edunet.es
SwedenCensit ABBox 331S-33123 VärnamoTel. +46 (0) 3 70 69 10 10Fax +46 (0) 3 70 188 88info@censit.se
SwitzerlandEUCHNER AGIng.- und VertriebsbüroGrofstraße 17CH-8887 Mels/St. GallenTel. +41 (0) 81 7 20 45 90Fax +41 (0) 81 7 20 45 99euchner.schweiz@bluewin.ch
TaiwanDaybreak International(Taiwan) Corp.3 Fl., 124 Chung-Cheng RoadShihlinTaipei, TaiwanTel. +8 86 (0) 2 8 866 1231Fax +8 86 (0) 2 8 866 1239day111@ms23.hinet.net
TurkeyPINAR MÜHENDISLIK SAN.ve Tic. Ltd. Sti.Perpa Tic. MerkeziKat. 11, No. 1705TR-80270 Okmeydani/lstanbulTel. +90 (0) 2 12 2 20 02 77Fax +90 (0) 2 12 2 20 13 16pinarmuh@superonline.com
United KingdomEUCHNER (U.K.) Ltd.Unit 2, Petre Drive,GB-Sheffield, S4 7PZTel. +44 (0) 1 14 2 56 01 23Fax +44 (0) 1 14 2 42 53 33info@euchner.co.uk
USAEUCHNER USA Inc.6723 Lyons St.USA-E. Syracuse, NY 13057Tel. +1 (3 15) 7 01-03 15Fax +1 (3 15) 7 01-03 19info@euchner-usa.com
´´
. .
.
ˆˆ
ˆ
ˆ
31
wwwwwwwwwwwwwww.....euceuceuceuceuchnerhnerhnerhnerhner.....cccccomomomomom
HeHeHeHeHeaaaaad officd officd officd officd officeeeee
EUCHNER GmbH + Co. KGKohlhammerstraße 16D-70771 Leinfelden-EchterdingenGermanyTel. +49/7 11/75 97-0Fax +49/7 11/75 33 16info@euchner.de
More than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Mor
More than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.
Automation
Safety
ManMachine
Recommended