Upload
vutuyen
View
235
Download
4
Embed Size (px)
Citation preview
DEDEDEDEDEEN
0994
43-0
7-05
/13
Subj
ect t
o te
chni
cal m
odifi
catio
ns w
ithou
t not
ice,
no
liabi
lity
will
be a
ssum
ed fo
r any
det
ail.
© E
UCH
NER
Gm
bH +
Co.
KG
· TA
Hand-held Pendant Stations/Handwheels
HBHR.indd 2 20.06.13 15:31
2
Internationally successful – the EUCHNER company
EUCHNER GmbH + Co. KG is a world-leading company in the area of industrial safety technology. EUCHNER has been developing and producing high-quality switching sys-tems for mechanical and systems engineering for more than 50 years.The medium-sized family-operated company based in Leinfelden, Germany, employs more than 500 people around the world, 400 in Germany alone.
In addition to the production locations in Unterböhringen and Shanghai/China, 15 sub-sidiaries and other sales partners in Germany and abroad work for our international success on the market.
Quality and innovation – the EUCHNER products
A look into the past shows EUCHNER to be a company with a great inventive spirit.We take the technological and ecological challenges of the future as an incentive for extraordinary product developments.
EUCHNER safety switches monitor safety doors on machines and installations, help to minimize dangers and risks and thereby reliably protect people and processes. Today, our products range from electromechanical and electronic components to intelligent integrated safety solutions. Safety for people, machines and products is one of our dominant themes.
We defi ne future safety technology with the highest quality standards and reliable technology. Extraordinary solutions ensure the great satisfaction of our customers. The product ranges are subdivided as follows:
Transponder-coded Safety Switches (CES) Transponder-coded Safety Switches with guard locking (CET) Interlocking and guard locking systems (Multifunctional Gate Box MGB) Access management systems (Electronic-Key-System EKS) Electromechanical Safety Switches Magnetically coded Safety Switches (CMS) Enabling Switches Safety Relays Emergency Stop Devices Hand-Held Pendant Stations and Handwheels Safety Switches with AS-Interface Joystick Switches Position Switches
Headquarters in Leinfelden-Echterdingen
madeinGermany
Logistics center in Leinfelden-Echterdingen
Production location in Unterböhringen
U2_U3_EN_2013.indd 1 13.03.13 17:32
Contents
3099443-07-05/13
Hand-held Pendant Stations/Handwheels
General 4About this catalog 4How can I find the right product? 4Standards and approvals 5
Hand-heldpendantstations 6Function and technology used in hand-held pendant stations 6Hand-held pendant stations HBA 10Hand-held pendant stations HBM 20Hand-held pendant stations HBL 24
Hand-heldpendantstationkit 29Hand-held pendant station HBA kit 29Hand-held pendant station HBM kit 37Hand-held pendant station HBL kit 41
Accessoriesforhand-heldpendantstationsHBA 45
Accessoriesforhand-heldpendantstationkit 47Accessories for hand-held pendant station kit, all designs 48Accessories for hand-held pendant station HBA/HBM kit 54Accessories for hand-held pendant station HBL kit 56
Holdersforhand-heldpendantstations 58
Electronichandwheels 60Function and technology used in handwheels 60Handwheel HKB 62Handwheel HKC 64Handwheel HKD 66Handwheel HWA 68Handwheel HWB 70
Accessoriesforhandwheels 72
Appendix 74Dimension drawing – HBA housing top shell 74Dimension drawing – HBM housing top shell 75Assembly drawings – HBL housing 75Request form for hand-held pendant stations HBA without handwheel 76Request form for hand-held pendant stations HBA with handwheel 77Request form for hand-held pendant stations HBM without handwheel 78Request form for hand-held pendant stations HBM with handwheel 79Request form for hand-held pendant stations HBL 80
Itemindex 81Index by item designation 81Index by order number 83
4
General
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Select the required information in the table of contents
General overview
No
Yes
Detailed overview Detailed overview
Find Product
Find the required productin the item index and
select in the ordering table
Select the required product in the
ordering table
Refine selectionby selecting the
required product featuresin the selection table
Do you know the order number
or the item designation?
AboutthiscatalogThe Hand-held Pendant Stations/Handwheels catalog provides you with an overview of our HBA, HBM and HBL series hand-held pendant stations as well as our HK and HW series handwheels.
HowcanIfindtherightproduct?There are two ways you can find the right product: If you know the order number or the item designation, look for the
product directly in the item index (see page 81 or page 83). If you have specific requirements, refine the selection step-by-step
with the aid of the table of contents and the selection tables.
10
Hand-Held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-held pendant stations HBA f Handwheel 100 pulses, wear-free magnetic detent mechanism
f 2 pushbuttons, 2-stage, 1 NO contact each, e.g. for enabling function
Depending on version: f Tamper-proof emergency stop device according to EN ISO 13850, dual-channel
f 2 selector switches, 5 positions each (X, Y, Z, 4, 5 and 0, 1, 10, 100, 1000)
f 3 foil pushbuttons, 1 NO contact each
Notes fHolder HBA for hand-held pendant stations: see accessories page 58 f Associated flange connector, 23-pin: see accessories page 51
Technical dataParameter Value UnitHBA housingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Coiled cable, stretchable to 3.5 m, 23-pin plug connectorWeight Approx. 0.8 kgHandwheelPulses/revolution 100Power supply 5 ± 5% V DCOutput specifications RS422APushbutton, 2-stage, e.g. for enabling functionSwitching elements 2, one NO contact eachConnection ratings 30 V DC / 100 mAEmergency stop deviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 ASelector switchOutput code see circuit planSwitching voltage max. 25 V AC/DCBreaking capacity max. 0.2 VAMembrane keypadSwitching elements 3, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mABreaking capacity max. 1 W
Dimension drawing
160
∅ 85
S2 S3
S1
S4
S5
S6
S8
S7
67
A1
Mounting magnet
Cable length stretched3,500 mm
Plug connector23-pin
9
Hand-Held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Version
Features
Selector switch
Key-operated
rotary switch
Push-button
Enabling device Emergency
stop deviceHand-wheel
Membrane keypad
RS422 interface,
3964R protocol
LCD display Page
2-st. 3-st.
Hand-held pendant stations HBA
10ff
Hand-held pendant stations HBM
20ff
Hand-held pendant stations HBL
24ff
Overview of hand-held pendant stations
You will find the following series and accessories in this catalog:
Due to their precision, their ergonomic design and their robustness, these products are the right choice for numerous applications. You will find the technical data after the product overview.
Hand-heldpendantstations/handwheels
Completedevices Kit Accesso-ries Holder
Hand-heldpendantstations Handwheels
See page 10
HBA
Accesso-ries
See page 24
HBL
See page 29
See page 45
See page 58
See page 68
HWA
See page 70
HWB
See page 72
Magneticdetentmechanism Mechanicaldetentmechanism
See page 62
HKB
See page 66
HKD
See page 64
HKC
See page 20
HBM
Contents
3099443-07-05/13
Hand-held pendant stations/handwheels
General 4About this catalog 4How can I find the right product? 4Standards and approvals 5
Hand-heldpendantstations 6Function and technology used in hand-held pendant stations 6Hand-held pendant stations HBA 10Hand-held pendant stations HBM 20Hand-held pendant stations HBL 24
Hand-heldpendantstationkit 29Hand-held pendant station HBA kit 29Hand-held pendant station HBM kit 37Hand-held pendant station HBL kit 41
Accessoriesforhand-heldpendantstationsHBA 45
Accessoriesforhand-heldpendantstationkit 47Accessories for hand-held pendant station kit, all designs 48Accessories for hand-held pendant station HBA/HBM kit 54Accessories for hand-held pendant station HBL kit 56
Holdersforhand-heldpendantstations 58
Electronichandwheels 60Function and technology used in handwheels 60Handwheel HKB 62Handwheel HKC 64Handwheel HKD 66Handwheel HWA 68Handwheel HWB 70
Accessoriesforhandwheels 72
Appendix 74Dimension drawing – HBA housing top shell 74Dimension drawing – HBM housing top shell 75Assembly drawings – HBL housing 75Request form for hand-held pendant stations HBA without handwheel 76Request form for hand-held pendant stations HBA with handwheel 77Request form for hand-held pendant stations HBM without handwheel 78Request form for hand-held pendant stations HBM with handwheel 79Request form for hand-held pendant stations HBL 80
Itemindex 81Index by item designation 81Index by order number 83
5
General
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Standardsandapprovals
StandardsHand-held pendant stations must comply with the requirements of the EMC directive 2004/108/EC. The EMC directive has been implemented in national law in the EU member states and, as a result, is binding for all manufacturers. Detailed requirements on EMC are defined in EN 61000 (electromagnetic compatibility EMC) part 6-2 and 6-4. If the requirements of this standard are met, conformity with the applicable laws and therefore with the EMC directive is assumed. EUCHNER hand-held pendant stations comply with the relevant standards and therefore help you to comply with the requirements during the design of your machinery.
ApprovalsMany of the hand-held pendant stations given in this catalog are listed by Underwriters Laboratories (UL). The approval symbols on the individual pages of the catalog indicate which devices are approved.This is the UL approval symbol:
Products with this symbol are approved by Underwriters Laboratories (UL, Canada and USA)
6
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Functionandtechnologyusedinhand-heldpendantstationsThe most important machine functions can be monitored, e.g. axis selec-tion and axis movement, can be controlled decentrally using hand-held pendant stations. The freedom of movement of the machine operator is increased, and the operator can monitor and control processes without being tied to a fixed control panel. In addition to the control function, hand-held pendant stations can also have a safety function. For this purpose, the hand-held pendant stations are equipped with emergency stop buttons and enabling switches.
Hand-heldpendantstationswithenablingfunctionHand-held pendant stations with enabling function are essentially similar to classic enabling switches.Enabling switches are manually operated control devices that, together with other control switches, enable commands related to potentially hazard-ous conditions to be run, as long as the enabling switches are actuated continuously. These switches are used wherever personnel must work directly in the danger area on machines and systems. This is necessary, e.g. during setting up, programming, testing or servicing work. As per annex 1 of the Machinery Directive, the protective action of movable safety guards can be disabled in these operating modes. The Machinery Directive places the condition that these operating modes must be secured using a lockable device (e.g. key-operated rotary switch) and machine operation is only allowed to be triggered by a second, separate action. To enable the operator in the danger area of a machine to trigger a machine movement, an enabling device should also be actuated. The operator must also be able to stop the machine movement using the enabling device. This task is performed by the enabling switch. Every person who is in the hazardous area must carry an enabling device so that suitable action can be taken in case of danger.
Two-stageorthree-stageenablingswitch?The operator can only start a machine movement if he/she actuates the enabling device and keeps it in the actuated position. The movement is stopped again when the switch is released. All pushbuttons and all 3-stage enabling switches feature this two-stage function (OFF-ON). However, experience shows that the operator often clenches the enabling device in an emergency.In this case a three-stage enabling switch is better and is specifically requested in many C standards. This switch has three switch positions (OFF-ON-OFF) and, if the operator clenches the switch, it is actuated beyond the enabling position (middle position) and the machine is shut down as a result.If a 2-stage pushbutton is used, it must also be ensured that, in an emer-gency, the operator is in a position to activate an emergency stop device in close proximity (VDI 2853). To identify the type of enabling device in the catalog, the following symbols are used:
Functionsequenceoftwo-stagepushbutton
Symbol for a 2-stage pushbutton
Symbol for a 3-stage enabling switch
122
1233
Functionsequenceofthree-stageenablingswitch
2-stage pushbutton
1
2
122E1, E2NO
NO1
2
122E1NO
NO
12
12
E2E1
E2E1
E1 E1
Stage 1Not actuated
Stage 2Enabling
Contactopenclosedclosed, enabling
Actuating point Actuating point
ZSG and pushbutton for HBA(2-stage with 1 NO contact)
ZSG(2-stage with 2 NO contacts)
Not actuated Not actuated
Enabling Enabling
NONC E3
E1, E2E3, E4E1, E2
NONCNC
NO1 1
2 2
3
1233
123
123
123
E1
E2
E4
E3
E1
E2
E4
E3
E1
E2
E4
E3
E1
E2
E1
E2
E1
E2
E1
E2E3
E1
E2E3
E1
E2E3
ZSE 2-2 ZSE 2-4
NO/NC NO/NC1 1
2 2
3
1233
E1, E2
ZXE
NO/NC
3-stage enabling switch
Stage 1Not actuated
Stage 2 (actuating point)
Enabling
Stage 3Pressed through
Contactopenclosedclosed, enabling
Actuating point
ZXE(3-stage with 2 NO contacts)
ZSE 2-2(3-stage with 2 NO contacts a nd 1 positively driven contact)
ZSE 2-4(3-stage with 2 NO contacts and 2 positively driven contacts)
Actuating point
Not actuated
Enabling
Not actuated
Panic function
Restart protection
Not actuated
Enabling
Not actuated
Panic function
Restart protection
7
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Design prize for hand-held pendant station HBA
As can be clearly seen in the figure, the enabling function can only be achieved at stage 2. This function is provided by the closing of the normally open contacts (NO = E1 and E2).If the button is released, that is back from stage 2 to stage 1, the normally open contacts are opened again. The 2-stage pushbuttons and 3-stage enabling switches are identical in this function.If, in this example, the button on a 3-stage enabling switch is pressed past the actuating point (stage 2) in panic (to stage 3), then not only the normally open contacts (NO) are reset, but also the safe positively driven contacts (NC ) in case of the ZSE series.The patented switch system ensures that the enabling function does not become active at stage 2 on the resetting of the pushbutton from stage 3 to stage 1. In this example, the enable can only be given if normally open and normally closed contacts are closed at the same time. This situ-ation is only possible on actuation from stage 1 to stage 2. In the other direction, from stage 3 to stage 1, stage 2 is skipped and unintentional re-starting prevented.Once the pushbutton has reached stage 1, the function sequence can be started again.Due to its design, the switch unit also provides a wear-free, constant actuating point (stage 2).
ErgonomichousingTo make the operation of machines even easier and safer for the user, EUCHNER is the first manufacturer of hand-held pendant stations to have designed the housing taking into account ergonomic aspects. This means the HBA, HBM and HBL housings have been developed such that they fit optimally in the hand. Well-known manufacturers of machine tools and control systems all over the world are already using EUCHNER hand-held pendant stations. The wide product range extends from standard hous-ings to custom-built hand-held pendant stations, e.g. with LCD displays, membrane keypads and serial communication ports.
Customhand-heldpendantstationsCustomized hand-held pendant stations based on the standard devices can also be produced in small quantities. In order to use these ergonomically designed housings for the various requirements, EUCHNER offers the option of customized solutions. In the Appendix, you will find forms which can be used to describe your requirements. We will be happy to draw up a quotation based on your requirements.
Hand-heldpendantstationsfromEUCHNERHand-held pendant stations from EUCHNER are characterized by their robust, ergonomic and attractive design. They are used to control axis movements of machines in setup mode, for example. The modular design of every unit permits an individual combination of safety components and functions as required by the customer. Depending on the size required and the functions to be integrated, EUCHNER offers three different types of hand-held pendant stations:
f HBAThe HBA is the smallest and handiest of the hand-held pendant stations from EUCHNER. Its compact size allows the HBA to be fastened on the machine without taking up much space. Its low weight permits comfortable working and operation, even over extended periods.
f HBMThe HBM is based on the ergonomic shape of the HBA. It additionally of-fers more space and greater flexibility for integrating more components and functions.
f HBLThe HBL is the largest hand-held pendant station from EUCHNER. It is especially robust and offers maximum flexibility for custom combination of components, even components with a larger depth.
Kitsforhand-heldpendantstationsTo enable you to use ergonomically designed housings even for small quantities, e.g. prototypes or special versions, EUCHNER provides kits for hand-held pendant stations. As a result you can assemble a hand-held pendant station in a user-friendly housing to suit your requirements.
ExplanationofsymbolsandnotationSymbols and specific notation related to the switches or the switching contact are used time and again in the catalog.The following example is intended to explain these aspects:
f Notation 1 NC + 1 NO
Explanation:Normally closed contacts are termed NC, normally open contacts NO. The number indicates how many contacts are available. The symbol behind the NC defines that the NC contact is a positively driven contact. This switch therefore has one normally closed contact and one normally open contact; the normally closed contact is a positively driven contact.
8
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
9
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Version
Features
Selectorswitch
Key-operated
rotaryswitch
Push-button
Enablingdevice Emergency
stopdeviceHand-wheel
Membranekeypad
RS422interface,
3964Rprotocol
LCDdisplay Page
2-st. 3-st.
Hand-heldpendantstationsHBA
10ff
Hand-heldpendantstationsHBM
20ff
Hand-heldpendantstationsHBL
24ff
Overviewofhand-heldpendantstations
10
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationsHBAf Handwheel100pulses,wear-freemagneticdetentmechanism
f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
Dependingonversion:f Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f 2selectorswitches,5positionseach(X,Y,Z,4,5and0,1,10,100,1000)
f 3foilpushbuttons,1NOcontacteach
Notes fHolder HBA for hand-held pendant stations: see accessories page 58 f Associated flange connector, 23-pin: see accessories page 51
TechnicaldataParameter Value UnitHBAhousingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Coiled cable, stretchable to 3.5 m, 23-pin plug connectorWeight Approx. 0.8 kgHandwheelPulses/revolution 100Power supply 5 ± 5% V DCOutput specifications RS422APushbutton,2-stage,e.g.forenablingfunctionSwitching elements 2, one NO contact eachConnection ratings 30 V DC / 100 mAEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 ASelectorswitchOutput code see circuit planSwitching voltage max. 25 V AC/DCBreaking capacity max. 0.2 VAMembranekeypadSwitching elements 3, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mABreaking capacity max. 1 W
Dimensiondrawing
160
∅ 85
S2 S3
S1
S4
S5
S6
S8
S7
67
A1
Mounting magnet
Cable length stretched3,500 mm
Plug connector23-pin
11
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
S1
GHJK
0 V
UB:
+5
V +
/-5%
RS 422 A
AB
DEF ABC
B
A
+-A
B
AB
L MNRSTUVWY XZ P
S4S5S6S3 S2
+24
Vol
t
S7 DCBA
1 0000 X2 0001 Y3 0011 Z4 0010 4 5 0110 5
S8 DCBA
1 0000 02 0001 1 3 0011 104 0010 100 5 0110 1000
ABCDZ
S7
ABCDZ
S81
5
1
5
Shie
ld e
lect
r. co
nnec
ted
to th
e ha
ndw
heel
S1:Emergency Stop
S2 (left) + S3 (right):Pushbutton 2-stagee.g. forenabling function
Shi
eld
Gro
und
conn
ectio
nHa
ndw
heel
A1:Handwheel
S4:Push button left
S5:Push button middleS6:Push button right
Conn
ecto
rPC
B
S7:Axle selectionSelector switch left5 positions
S8:Increment selectionSelector switch right5 positions
Gray-CodeGray-Code
A1
122
Orderingtable
Version/item
Features
Orderno.2selectorswitches5positionseach
3foilpush-buttons,1NOcontacteach
2pushbuttons2-stage
Emergencystopdevice
Handwheel100pulses
S7,S8 S4,S5,S6 S2,S3 S1 A1
HBA-079828 079828
HBA-079826 079826
HBA-072936 072936
HBA-079827 079827
Circuitplan
* Travel diagram see page 6
12
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationsHBAf Handwheel100pulses,wear-freemagneticdetentmechanism
f 1enablingswitch,3-stage,2NOcontactseach
Dependingonversion:f Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f 1selectorswitchwith6positions(X,Y,Z,4,5,6)
f 1selectorswitchwith5positions(0,1,10,100,1000)
f 3foilpushbuttons,1NOcontacteach
Notes fHolder HBA for hand-held pendant stations: see accessories page 58 f Associated flange connector, 23-pin: see accessories page 51 f Associated flange connector, 28-pin: see accessories page 51
Dimensiondrawing
160
∅ 85 67
A1
Mounting magnet
Cable length stretched3,500 mm
Plug connector23-pin or 28-pin (HBA-100194)
TechnicaldataParameter Value UnitHBAhousingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Spiral cable, stretchable to 3.5 m, plug connector 23-pin or 28-pin (HBA - 100 194)Weight Approx. 0.8 kgHandwheelPulses/revolution 100Power supply 5 ± 5% V DCOutput specifications RS422AEnablingswitchZXE,3-stageSwitching elements 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 AEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 ASelectorswitchOutput code see circuit planSwitching voltage max. 25 V AC/DCBreaking capacity max. 0.2 VAMembranekeypadSwitching elements 3, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mABreaking capacity max. 1 W
13
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
S1
GHJKMNPR
0 V
UB:
+5
V +
/-5%
RS 422 A
AB
DEF ABC
B
A
+-A
B
AB
L Sa/UUVWXZ Y T
S4S5S6
+24
Vol
t
S7 DCBA
1 0000 X2 0001 Y3 0011 Z4 0010 4 5 0110 56 0111 6
S8 DCBA
1 0000 02 0001 1 3 0011 104 0010 100 5 0110 1000
ABCDZ
S7
ABCDZ
S81
5
1
6
S2
123
**
shie
ld e
lect
r. co
nnec
ted
to th
e ha
ndw
heel
Emergency StopEnabling switch *ZXE3-stageleft
Shi
eld
Gro
und
conn
ectio
nHa
ndw
heel
A1:HandwheelPushbutton left
Pushbutton middle
Pushbutton right
Conn
ecto
rPC
B
Axle selctionSelector switch left6 positions
Increment selectionSelector switch right5 positions
Gray-CodeGray-Code
A1
1233
Orderingtable
Version/item
Features
Orderno.2selectorswitches,5and6positions
3foilpush-buttons,1NOcontacteach
1enablingswitchZXE,
3-stage
Emergencystopdevice
Handwheel100pulses
HBA-100186 100186
HBA-100212 100212
HBA-100213 100213
HBA-100194 100194
Circuitplan
* Travel diagram see page 6** Plug contact U on HBA-100213 (plug connector, 23-pin) Plug contact a on HBA-100194 (plug connector, 28-pin)
14
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationsHBAf Handwheel100pulses,wear-freemagneticdetentmechanism
f Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f 1selectorswitch,6positions(0,Z,X,Y,4,5)
f 6foilpushbuttons,1NOcontacteach
Dependingonversion:f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
f 1enablingswitch,3-stage,2NOcontacts
Notes fHolder HBA for hand-held pendant stations: see accessories page 58 f Associated connection kit comprising 26-pin connection box and short-circuit plug: see accessories page 45 f Function compatible with Siemens MINI BHG
Dimensiondrawing
160
∅ 85
S2 S3
S1
S8
S4
S9
S10S6
S7S5
67
A1
275
700-
2500
3500
(cab
le le
ngth
stre
ched
)
2 pushbuttons2-stage, right and left
Plug connector26-pin
1 enabling switch3-stage, left
Mounting magnet
HBA-102434 HBA-103037
TechnicaldataParameter Value UnitHBAhousingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Coiled cable, stretchable to 3.5 m, 26-pin plug connectorWeight Approx. 0.8 kgHandwheelPulses/revolution 100Power supply 5 ± 5% V DCOutput specifications RS422AEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 ASelectorswitchOutput code see circuit planSwitching voltage max. 25 V AC/ DCBreaking capacity max. 0.2 VAMembranekeypadSwitching elements 6, one NO contact each V AC/DCSwitching voltage max. 30 V DCSwitching current max. 100 mABreaking capacity max. 1 WPushbutton,2-stage,e.g.forenablingfunctionSwitching elements 2, one NO contact each mAConnection ratings 30 V DC / 100 mA WEnablingswitchZXE,3-stageSwitching elements 1, 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 A
15
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
S1
1234
0 V
UB:
+5
V +
/-5%
RS 422 A
AB
222120 181923
+24
VDC
S3 S2S4S5S6S7S8S9
26
S10 CBA1 110 02 010 Z 3 011 X4 111 Y 5 101 46 001 5
B A
B
A
A
B
16 51113141517 610
89 712
A1
+-
2524
S2
7 6 5
123
S10:Selector switch right6 positions
S1:Emergency-stop
S2 (left) + S3 (right):Pushbutton 2-stagee.g. forenabling function
S4: Push button "+" S5: Push button "-"S6: Push button "~"
HandwheelRS422
S7: Push button "F1"S8: Push button "F2"S9: Push button "F3"
Shie
ld
Conn
ecto
r PC
B
S2:Enabling switchZXE3 stageleft
Schi
rm
not
conn
ecte
d
ABCZ
S101
6
Gray-Code
122
1233
Version/item
Features
Orderno.1selector
switch6positions
6foilpushbuttons,1NOcontacteach
2pushbuttons,
2-stage
1enablingswitchZXE,
3-stage
Emergencystopdevice
Handwheel100pulses
S10 S4,S5,S6,S7,S8,S9 S2,S3 S2 S1 A1
HBA-102434 102434
HBA-103037 103037
Circuitplan
* Travel diagram see page 6
Orderingtable
16
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationsHBAf Membranekeypadcanbelabeledasrequiredusingslide-instrips
f Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f LEDswhite,colorcustomer-specificusingcoloredkeypadmembrane
Dependingonversion:f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
f 1enablingswitch,3-stage,2NOcontacts
f Coiledcable,stretchableto5m,35-pinplugconnector
f Coiledcable,stretchableto3.5m,42-core,flyinglead
Notes fHolder HBA for hand-held pendant stations: see accessories page 58 f Associated flange connector, 35-pin: see connection components page 51 f For template for slide-in strips, see www.euchner.de (Support)
Dimensiondrawing
880
- 400
0
5000
Ø
S2
S1
S3
S4
S5S6
S7
S8
S9
S10
S11
S12
S17
S13
S14 S15
S16
<39>
160
700
85
3500
Mounting magnet
Plug connector35-pin
(cab
le le
ngth
stre
tche
d)
(cab
le le
ngth
stre
tche
d)
2 pushbuttons2-stage, right and left
1 enabling switch3-stage, left
HBA-096692 HBA-105693
Flying lead42-core
TechnicaldataParameter Value UnitHBAhousingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Coiled cable, stretchable to 5 m, 35-pin plug connector
Coiled cable, stretchable to 3.5 m, 42-core, flying lead kg
Weight Approx. 0.8 kgEmergencystopdeviceStandard EN ISO 13850 V DCSwitching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 AMembranekeypadSwitching elements 14, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mABreaking capacity max. 1 WPushbutton,2-stage,e.g.forenablingfunctionSwitching elements 2, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mAEnablingswitchZXE,3-stageSwitching elements 1, 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 A
17
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
RDBU
RDBU
PKBU
GYB
U
YEBK
BUBKVT RDWH
GYP
K
BNGN
YEGY
PKGN
WH
ABCDEF GHJKLMN YZabc
BNBU
RDW
H
BNRD
BKW
H
BKBN
BNG
N
YEW
H
BNYE
GYW
H
BNG
Y
PRSTU defghi
GN
GY
YEG
Y
GN
PK
YEPK
GN
BU
YEBU
WHP
K
BNPK
BUW
H
VWX jkm
RDG
N
RDYE
BKG
N
H5 H4H6H7H8H9
DC +
24V
H10
H11
H12
H13
H14
H15
H16
H17
S9S10S11S12S13S14S15S16S17 S4S5S7S8 S6
S1
S3 S2
S1:EmergencyStop
S2:Enabling switch*2-stageleft
S3:Enabling switch*2-stageright
S2:Enabling switch*ZXE3-stageleft
S4 - S17:Membrane keypad
S2
123
122
1233
Version/item
Features
Orderno.Membranekeypad Pushbutton,2-stage
EnablingswitchZXE,
3-stage
Emergencystop
device
S4-S17 S2,S3 S2 S1
HBA-096692 096692
HBA-105693 105693
Circuitplan
* Travel diagram see page 6
Orderingtable
18
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationsHBASf Programmablepulsegeneratorf Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f Membranekeypadwith20keysand2LEDs
f LCDdisplaywithLEDbackgroundlighting,switchable4-line/8-columnor8-line/16-column
f RS422interface,3964Rprotocol
Dependingonversion:f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
f 1enablingswitch,3-stage,2NOcontacts
f Coiledcablestretchableto3.5mf Straightconnectioncable,length10m
Notes fHolder HBA for hand-held pendant stations: see accessories page 58 f Associated male flange connector, 19-pin: see accessories page 45 f ActiveX module available for integrating the user’s applications (for MS Windows®-based user programs with ActiveX support)
85
160
S3S2
S1
38,5
Dimensiondrawing
Cable length stretched3,500 mm
Plug connector19-pin
2 pushbuttons2-stage, right and left
1 enabling switch3-stage, left
HBAS-072949
Mounting magnet
HBAS-094594HBAS-099105
Cable length 10,000 mm
Cable length stretched3,500 mm
TechnicaldataParameter Value UnitHBAhousingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Spiral cable, stretchable to 3.5 m, or straight connection cable, length 10 m.
Plug connector, 19-pinWeight Approx. 0.85 kgPulsegeneratorPulses programmableOutput specifications RS422AEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 A ACommunicationsinterfaceType Serial, RS422A (4-wire)Data format 8 data bits + 1 parity bit (even), 1 stop bitTransfer speed 9600 or 19200 baud, automatic detectionTransfer protocol 3964RElectricalconnectionPower supply 24 ± 20% V DCOperating current, max. 100 mAPushbutton,2-stage,e.g.forenablingfunctionSwitching elements 2, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mAEnablingswitchZXE,3-stageSwitching elements 1, 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 A
19
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
13
2E1
E2
S2
161819
S1
1114 13
+24
V
0 V
4 315 179
RXTXTX RX
10 8
A
POW
ERST
ATUS
25B
6
AB
1217
S3
1819
S2
1617
WHP
K
BNGY
GYW
H
YEBN
WHY
E
BNGN
GNW
H
GYPK
RDBU
VT VT RD BU PK GY YE GN BN WH
S2:Enablingswitch ZXE3 stageleft
S2 (left) + S3 (right):Pushbutton 2 stagee.g. for enabling function
S1:Emergency Stop
PowerSupply
Microcontroller
Display
Shie
ld
CommunicationInterface RS422
Pulse GeneratorRS422
Keyp
ad
Program-memory FLASH
Interface
Display-memoryRAM
1233
Version/item
Features
Orderno.2
pushbuttons,2-stage
1enablingswitchZXE,3-stage
Emergencystopdevice
Programmablepulsegenerator,membranekeypad,display,
RS422interface,3964RprotocolS2,S3 S2 S1
HBAS-072949HBAS-099105
072949099105
HBAS-094594 094594
Circuitplan
* Travel diagram see page 6
ActiveX moduleSoftware for integration into user software that supports ActiveX 093011
ActiveX module manualDetailed documentation on use of the software 093013
Orderingtable
20
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationHBM-111711f Handwheel100pulses,wear-freemagneticdetentmechanism
f Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f 1enablingswitch,3-stage,2NOcontacts
f 2selectorswitches,6positionseach(X,Y,Z,4,5,6and0,0.1,1,10,100,1000)
f 6illuminatedpushbuttons,canbeindi-viduallylabeled
f Coiledcable,stretchableto3.5m,35-core,flyinglead
Notes fHolder HBM for hand-held pendant stations: see accessories page 58
700
3500
550
- 250
0
92 <82>
200
S1
S5
S6
S7
S8
S9
S10
A1
Dimensiondrawing
S2Enabling switch3-stage, left
(cab
le le
ngth
stre
tche
d)
Mounting magnet
Mounting magnet
S36 positions
S46 positions
TechnicaldataParameter Value UnitHBMhousingMaterial PlasticColor AnthraciteOperating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Coiled cable, stretchable to 3.5 m, 35-core, flying leadWeight Approx. 1.1 kgHandwheelPulses/revolution 100Power supply 5 ± 5% V DCOutput specifications RS422AEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 A AEnablingswitchZXE,3-stageSwitching elements 1, 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 ASelectorswitchOutput code see circuit planSwitching voltage max. 25 V AC/DCBreaking capacity max. 0.2 VAButtonsSwitching elements 3, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mALED I = 21 mA / U = 24 V DC
21
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Circuitplan
OrderingtableItem Orderno.
Hand-held pendant station HBM-111711 with: f Handwheel 100 pulses f Tamper-proof emergency stop device according to EN ISO 13850, dual-channel f Enabling switch ZXE, 3-stage, 2 NO contacts, f 2 selector switches, 6 positions each f 6 illuminated pushbuttons, 1 NO contact each
111711
* Travel diagram see page 6
+24
VA1
A05
Handwheel, 100 pulsesRS422 A
AAB B
RS422 A
X1/
1A
X1/
2AB
X1/
4B
X1/
3
X1/
6 0V
X1/
5+U
B: D
C+5
V +
/-5%
GN
BN
BU
RD
RD
BU
GY
BKVT
PK
WH
YE
GY
PK
GN
WH
BN
GN
YE
WH
BN
YE
GY
WH
BN
GY
BN
PK
BU
WH
BN
BU
WH
PK
1
12
2
S1EMERGENCY STOP
3
1
2
S2Left enabling switchZXE *
34
34
E1
E2
C1
C2
NO
2N
O1
GRAY
1
6
22.5°
123456 0111
01100010001100010000 X
YZ456
S3 DCBA
ABCDZZGRAY
1
6
22.5°
S4Right selector switch6 positions
S3Left selector switch6 positions
123456 0111
01100010001100010000 0
0,11
10100
1000
S4 DCBA
ABCDZZ
LP2
LP1
LP3
LP4
LP5
LP6
LP2
LP1
LP3
LP4
LP5
LP6
0 V
BN
RD
BK
WH
BK
BN
GN
GY
YE
GY
GN
PK
YE
PK
GN
BU
YE
BU
RD
GN
RD
YE
BK
GN
RD
WH
Scr
een
S10Buttonwith white LED
34
X1X2
S9Buttonwith white LED
S8Buttonwith white LED
S7Buttonwith white LED
S6Buttonwith white LED
S5Buttonwith white LED
34
X1X2
34
X1X2
34
X1X2
34
X1X2
34
X1X2
1233
22
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationHBM-112392f Handwheel100pulses,wear-freemagneticdetentmechanism
f Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f 1enablingswitch,3-stage,2NOcontacts
f 9illuminatedfoilpushbuttons,1NOcontacteach,canbelabeledasrequiredusingslide-instrips
f Straightconnectioncable,length3.5m,plugconnector35-pin
Notes fHolder HBM for hand-held pendant stations: see accessories page 58 f Associated flange connector, 35-pin: see connection components page 51 f For template for slide-in strips, see www.euchner.de (Support) f Replacement for hand-held pendant stations HBE-097337 and HBE-097338
3500
92
200
S4
S10S9
S1
A1
S5
S7
S8S6
S11
S3
82
Dimensiondrawing
Plug connector35-pin
S2Enabling switch3-stage, left
Mounting magnet
Mounting magnet
Exchangeable slide-in strips
TechnicaldataParameter Value UnitHBMhousingMaterial PlasticColor AnthraciteOperating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Connection Straight connection cable, length 3.5 m, plug connector 35-pinWeight Approx. 1.1 kgHandwheelPulses/revolution 100Power supply 5 ± 5% V DCOutput specifications RS422AEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 3 A AEnablingswitchZXE,3-stageSwitching elements 1, 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 AMembranekeypadSwitching elements 14, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mABreaking capacity max. 1 W
23
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
24 V0 V
X3/
9
X3/
8
X3/
7
X3/
6
X3/
5
X3/
4
X3/
3
X3/
2
X3/
1X
4/1
X6/
1
X6/
2
X4/
2
X6/
3
X4/
3
X6/
4
X4/
4
X6/
5
X4/
5
X6/
6
X4/
6
X7/
1
X5/
1
X7/
2
X5/
2
X7/
3
X5/
3
X7/
4
X5/
4X
3/10
ABCDEFGHaJ KL RP WVjkbMcNdSeTfUgXhYiZm
GY
WH
WH
PK
GY
PK
BN
YE
BN
GY
BN
PK
BU
WH
BN
BU
RD
WH
YE
BU
GN
BU
YE
GY
GN
GY
BK
BN
BK
WH
BN
RD
BK
GN
RD
YE
RD
GN
GN
PK
YE
PK
Scr
een
3434 3434 3434 34 34343
1
2
34
34
E1
E2
C1
C2
NO
2N
O1
1
12
2
S1EMERGENCY STOP
A1
A05
Handwheel, 100 pulsesRS422 A
AAB B
RS422 A
X1/
1A
X1/
2AB
X1/
4B
X1/
3
0VX
1/6
X1/
5+U
B: D
C+5
V +
/-5%
S2Left enabling switchZXE *
S3 - S11Buttons with LED
GN
BN
BU
RD
RD
BU
GY
BKVT
PK
WH
YE
GN
WH
BN
GN
YE
WH
S11 S10 S9 S8 S7 S6 S5 S4 S3
Circuitplan
* Travel diagram see page 6
1233
OrderingtableItem Orderno.
Hand-held pendant station HBM-112392 with: f Handwheel 100 pulses f Tamper-proof emergency stop device according to EN ISO 13850, dual-channel f Enabling switch ZXE, 3-stage, 2 NO contacts, f 9 illuminated foil pushbuttons, 1 NO contact each f Slide-in strips for logo
112392
24
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationHBL-097339f Handwheel100pulsesf Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f Enablingswitch,3-stagef 3illuminatedpushbuttons,canbeindividuallylabeled
f 2selectorswitchesf Key-operatedrotaryswitch
Notes fHolder HBL for hand-held pendant stations: see accessories page 58 f Associated flange connector, 35-pin: see connection components page 51
Dimensiondrawing
77
120
114
252
Mounting magnet
Cable length3,500 mm
Hanging clip
S3
Plug connector35-pin
A1
S23 positions
S6
S8Enabling switch 3-stage, left
S7
S4 S5
S112 positions
L1 L2 L3
TechnicaldataParameter Value UnitHousingHBLMaterial PlasticColor Blue-gray RAL 7031Ambient temperature 0 ... +55 °CDegree of protection according to EN 60529 IP 65Connection Cable 3.5 m, 35-pin plugWeight Approx. 2.1 kgEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13 Ue 24 V Ie 2,75 AHandwheelHKDPulses per revolution 100Power supply 5 ± 5% V DCOutput circuit RS 422 AOutput signals see page 67EnablingswitchZSE,3-stageSwitching elements 2 NO contacts, 1 positively driven contactUtilization category according to IEC 60947-5-1 AC-15 Ue 24 V Ie 4 A
DC-13 Ue 24 V Ie 3 AButtonsSwitching elements 3, one NO contact eachSwitching voltage max. 30 V DCSwitching current max. 100 mALED I = 21 mA / U = 24 V DCSelectorswitchSwitching voltage max. 30 V DCSwitching current max. 100 mAKey-operatedrotaryswitchSwitching voltage max. 30 V AC/DCSwitching current max. 250 mA
25
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Circuitplan
P R V W L K
X Y C D E F
AA
BB
A k m B H S T U i j c b a
G J M N fe g h
S7
L1 L2 L3
S6 S2 S8
S3 S5S4 ABCDZ
S11
12
Gray-Code
Enabling switch ZSE *
A1Handwheel
Emergency stopKey-operated rotary switch
Selector switchOutput code
1 of 3
Selector switchOutput code
binary
1233
* Travel diagram see page 6
OrderingtableItem Orderno.
Hand-held pendant station HBL-097339 with: f Handwheel 100 pulses f Tamper-proof emergency stop device according to EN ISO 13850, dual-channel f Enabling switch ZSE, 3-stage, 2 NO contacts, 1 positively driven contact f 3 illuminated pushbuttons, 1 NO contact each f 2 selector switches, 12 positions and 3 positions f Key-operated rotary switch, 1 NO contact, 1 NC contact
097339
Output tableSelector switch S1
Detentposition
OutputD C B A
1 0 0 0 02 0 0 0 13 0 0 1 04 0 0 1 15 0 1 0 06 0 1 0 17 0 1 1 08 0 1 1 19 1 0 0 0
10 1 0 0 111 1 0 1 012 1 0 1 1
26
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationHBLS-072725f Handwheel100pulsesf Tamper-proofemergencystopdeviceaccordingtoENISO13850,dual-channel
f 2pushbuttons,2-stage,e.g.forenablingfunction
f Keypadwith12illuminatedkeysf Keypadcanbedesignedasrequiredusingslide-infilm
f 2selectorswitchesf LCDdisplay(textmode)f RS422interface,3964Rprotocol
Notes fHolder HBL for hand-held pendant stations: see accessories page 58 f Associated flange connector, 23-pin: see connection components page 51 f ActiveX module available for integrating the user’s applications (for MS Windows®-based user programs with ActiveX support)
Dimensiondrawing
77
120
114
252
Mounting magnet
Cable length3,500 mm
Hanging clip
Plug connector23-pin
A1
Display, 8 lines, 15 characters/line
S2/S3Pushbutton2-stage, left/right
S1
TechnicaldataParameter Value UnitHousingHBLMaterial PlasticColor Blue-gray RAL 7031Operating temperature 0 ... +50 °CDegree of protection according to EN 60529 IP 65Connection Cable 3.5 m, 23-pin plugWeight 2.2 kgEmergencystopdeviceStandard EN ISO 13850Switching elements 2 NC contactsUtilization category according to IEC 60947-5-1 DC-13 Ue 24 V Ie 2.75 AHandwheelHKDPulses per revolution 100Output circuit RS 422 AOutput signals see page 67PushbuttonZSG,2-stage,e.g.forenablingfunctionSwitching elements 2, one NO contact eachUtilization category according to IEC 60947-5-1 AC-15 Ue 24 V Ie 4 A
DC-13 Ue 24 V Ie 3 AInterfaceType RS 422Data format 8 data bits , even parity, 1 or 2 stop bitsTransfer speed 9600 or 19200 (setting using DIL switches) baudTransfer protocol 3964 RElectricalconnectionPower supply 24 ±20% V DCOperating current, max. 200 mA
27
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Circuitplan
A B BA
A
BA
B
+UB 0 Volt
RX TX
HA BC D E F J G PRV WN KL
NRX
M
NTX
S
96 1 58 10 3 72 4
A1
S2
S3
S1
Handwheel A05 ( RS422A)
Pushbutton ZSG *e.g. for enabling function
Powersupply rig
ht
Serial communication interfaceRS422
E-Stop
Control Panel
Shield electr. connected to the plug connector housing
left
Shie
ld
Microcontroller
* Travel diagram see page 6
122
OrderingtableItem Orderno.
Hand-held pendant station HBLS-072725 with: f Handwheel 100 pulses f Tamper-proof emergency stop device according to EN ISO 13850, dual-channel f 2 pushbuttons ZSG 2-stage, 2 NO contacts each, e.g. for enabling function f Keypad with 12 illuminated keys f 2 selector switches, 12 positions each
072725
ActiveX moduleSoftware for integration into user software that supports ActiveX 067176
ActiveX module manualDetailed documentation on use of the software 067178
28
Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
29
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationHBAkitThe kit is designed to match individual customer specifications. Thanks to its modular configuration, you can construct prototypes and special versions in line with your requirements. To match the housings, aluminum front panels are available in silver or black anodized.
Customer-specific functionality can be achieved by using the components supplied in the kit (pushbutton, selector switch, key-operated rotary switch, handwheel, enabling switch, etc). For connection to the control system, cables with different numbers of wires, plug connectors and the relevant flange sockets are available. The type of protection IP 65 can be achieved using one of the seals included.
HBAkitwithouthandwheelThe versions without handwheel have a cable gland and mounting magnet. In addition to the basic HBA housing, other identical versions with the option of fitting an emergency stop device and 2-stage push-buttons or 3-stage enabling switches are available.
HBAkitwithhandwheelThe versions with handwheels, some with 2-stage pushbutton or 3-stage enabling switch, are distinguished by the output stages of the handwheels and are adapted to various control systems.
30
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HBAhousingwithouthandwheelf Cableglandforcablediameter5-10mm
f Rubber-coatedmountingmagnetontherearofhousing
f 6fixingdomesforprintedcircuitboardinstallationintopshell
Dependingonversion:f Holeforemergencystopdevice (sealed with blind plug)
f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
f 1enablingswitch,3-stage,2NOcontacts
Notes fSuitable front panels see page 36 fSuitable emergency stop device (turn or pull to reset) see page 54fAttention: Housing HBA-095562 is suitable only for emergency stop device 106435 with short design. fDepending on version with 2 2-stage pushbut-tons or 1 3-stage enabling switch.
Dimensiondrawing
160
∅ 85
S1 S2
38,5
Blind plug in hole for emergency stop device
Mounting magnet
Cable gland included
Enabling switch, 3-stage
Top shell
HousingHBA-084450HBA-086155
HousingHBA-095562
Dimensions of emergency stop devices see page 54
TechnicaldataParameter Value UnitHBAhousingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12Weight 0.3 kgPushbutton,2-stage,e.g.forenablingfunctionSwitching elements 2, one NO contact eachConnection ratings DC 30 V / 100 mAEnablingswitchZXE,3-stageSwitching elements 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 A
31
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Orderingtable
Version/item
Features
Orderno.Holeforemergencystopdevice
2pushbuttons*2-stage,pre-assembledwith
1NOcontacteach,e.g.forenablingfunction
1enablingswitchZXE**3-stage,
2NOcontactspre-assembled
S1,S2 S1
Housing HBA-084445(without hole, without enabling switch) 084445
Housing HBA-084450
for emergency stopshort and long designs
084450
Housing HBA-086155
for emergency stopshort and long designs
086155
Housing HBA-095562
for emergency stopshort design
095562
122
1233
* Travel diagram see page 6
** Travel diagram see page 55
32
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HBAhousingwithhandwheelf Handwheel100or25pulses,wear-freemagneticdetentmechanism
f Holeforemergencystopdevice (sealed with blind plug)
f Cableglandforcablediameter5-10mm
f Rubber-coatedmountingmagnetontherearofhousing
f 6fixingdomesforprintedcircuitboardinstallationintopshell
Dependingonversion:f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
f 1enablingswitch,3-stage,2NOcontacts
f Varioushandwheeloutputstages
Notes fSuitable front panels see page 36 fSuitable emergency stop device (turn or pull to reset) see page 54fAttention: f Housings HBA-095561, HBA-095573, HBA-095572 and HBA-095574 suitable only for emergency stop device 106435 short design. fDepending on version with 2 two-stage push-buttons or 1 three-stage enabling switch.
Dimensiondrawing
160
S1 S2
67∅ 85
Blind plug in hole for emergency stop device
Mounting magnet
Cable gland included
Enabling switch 3-stage
Top shell
A1
Dimensions of emergency stop devices see page 54
TechnicaldataParameter Value UnitHBAhousingMaterial PlasticColor Gray RAL 7040Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CDegree of protection according to EN 60529 /NEMA IP 65 / 250-12Weight 0.3 kgPushbutton,2-stage,e.g.forenablingfunctionSwitching elements 2, one NO contact eachConnection ratings 30 V DC / 100 mAEnablingswitchZXE,3-stageSwitching elements 1, 2 NO contactsUtilization category according to IEC 60947-5-1 DC-13, Ue 24 V, Ie 0.1 AHandwheelRS422A(UB=5VDC)Pulses/revolution 100Power supply 5 ± 5% V DCOutput specifications RS422AHandwheelpush-pull5V(UB=5VDC)Pulses/revolution 100Power supply 5 ± 5% V DCOutput circuit 5 V push-pullOutput voltage / output current HIGH, min. 4.0 V at 0 mA / 3.4 V at 5 mA / 3.0 V at 20 mA
LOW, max. 1.3 V at 15 mAHandwheelpush-pull5V(UB=10...30VDC)Pulses/revolution 25Power supply 10 ... 30 V DCOutput circuit 5 V push-pullOutput voltage / output current HIGH, min. 4.9 V at 0 mA / 3.9 V at 5 mA / 3.6 V at 20 mA
LOW, max. 1.3 V at 15 mAHandwheelpush-pull24V(UB=10...30VDC)Pulses/revolution 100Power supply 10 ... 30 V DCOutput circuit 24 V push-pullOutput voltage / output current HIGH, min. UB - 3 V at 20 mA
LOW, max. 3 V at 20 mA
33
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Orderingtable
Version/item
Features
Orderno.
Handwheel
Holeforemergency
stop
2pushbuttons*
2-stage,1NOcontact
eachpre-assembled
1enablingswitch**
ZXE,3-stage,2NOcontactspre-assembled
OutputstagePowersupply Pulsesper
revolutionRS422Push-pull
UA UB S1,S2 S1
Housing
HBA-083449
A055 V DC 100
for emergency
stop short and long
designs
083449
Housing
HBA-095561
A055 V DC 100
for emergency
stop short design
095561
Housing
HBA-083499
5 VG12
10 ... 30 V DC 25
for emergency
stop short and long
designs
083499
Housing
HBA-095573
5 VG12
10 ... 30 V DC 25
for emergency
stop short design
095573
Housing
HBA-083495
UB - 3 V
G2410 ... 30 V DC 100
for emergency
stop short and long
designs
083495
Housing
HBA-095572
UB - 3 V
G2410 ... 30 V DC 100
for emergency
stop short design
095572
Housing
HBA-086762
5 VG05
5 V DC 100
for emergency
stop short and long
designs
086762
Housing
HBA-095574
5 VG05
5 V DC 100
for emergency
stop short design
095574
UB
B
/A
/B
A
RS 4
22 A
A
B
/B
/A
+-
+-
0 V
UB
Shield
A1HandwheelRS422A
0 V
UB
B
A A
B
+-
+-
push
pul
l
Shield
A1Handwheelpush pull
122
1233
* Travel diagram see page 6
** Travel diagram see page 55
34
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
TopshellHBAf Materialplasticf Colorgrayorblack
Dependingonversion:f HoleforhandwheelHKB
Notes fSuitable front panels see page 36 52
46,5
93
85
155
92,5
A
A
52
46,5
92,5
15,0
5
13,6
85
155
A
A3,5
7
3
A-A
Dimensiondrawing
Fixing dome (rear side)
Top shellHBA-105640HBA-105642
Top shellHBA-105641HBA-105643
Fixing dome (rear side)
Hole for handwheel HKB(handwheel HKB see page 62)
OrderingtableItem Orderno.
Top shell HBA-105640, gray, without hole for handwheel HKB 105640
Top shell HBA-105641, gray, with hole for handwheel HKB 105641
Top shell HBA-105642, black, without hole for handwheel HKB 105642
Top shell HBA-105643, black, with hole for handwheel HKB 105643
35
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
BottomshellHBAf Materialplasticf Colorgrayorblack
Dependingonversion:f Holeforemergencystopdevicef HoleforenablingswitchZXE(3-stage, 2 NO contacts)
f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
Notes fSuitable emergency stop device (turn or pull to reset) see page 54 fSuitable enabling switch ZXE (3-stage, 2 NO contacts) see page 55 f Technical data of pushbutton see page 48
Dimensiondrawing
50
7055
25
160
85
32,5
5
22,4
18,5
15
16,2 - 0,12+0,20
A
20,5
22,5
A
Mounting magnet
Hole for enabling switch ZXE (optional)Enabling switch ZXE,see page 55
Hole for emergency stop (optional)
Pushbutton (optional)
Cable gland (included)
Mounting screws (6 x included)
Orderingtable
Version/item
Features
Orderno.Holeforemergencystopdevice
2pushbuttons,*2-stage,1NOcontacteach
pre-assembled,e.g.forenablingfunction
1enablingswitchZXE,**3-stage,
2NOcontactspre-assembled
S1,S2 S1
Bottom shell HBA-105503, color gray(without holes, without pushbutton) 105503
Bottom shell HBA-105504, color gray
for emergency stopshort and long designs
105504
Bottom shell HBA-114213, color gray
for emergency stopshort and long designs
114213
Bottom shell HBA-105506, color gray
for emergency stopshort design
105506
Bottom shell HBA-105507, color black(without holes, without pushbutton) 105507
Bottom shell HBA-105508, color black
for emergency stopshort and long designs
105508
Bottom shell HBA-114215, color black
for emergency stopshort and long designs
114215
Bottom shell HBA-105510, color black
for emergency stopshort design
105510
122
1233
* Travel diagram see page 6
** Travel diagram see page 55
36
Hand-held Pendant Station HBA Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
FrontpanelsforhousingandtopshellHBAwithandwithouthandwheelNotes
fSuitable for housing HBA (see page 30 and page 32) and top shell HBA (see page 34)
Dimensiondrawing
0,5
69,4
63,9
Rear is coated so as to be self-adhesive
∅ 67,4
69,4
142,
4
0,5
Rear is coated so as to be self-adhesive
For housing HBA without handwheel
For housing HBA with handwheel
OrderingtableItem Orderno.
Front panel for housing HBA without handwheel, silver anodized 084395
Front panel for housing HBA without handwheel, black anodized 084396
Front panel for housing HBA with handwheel, silver anodized 083635
Front panel for housing HBA with handwheel, black anodized 083636
TechnicaldataParameter Value UnitFront-panel material Electrically anodized aluminum, black or silver, rear side with self-adhesive coating
37
Hand-held Pendant Stations HBM Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationsHBMkit
Hand-heldpendantstationsHBMkit
The kit is designed to match individual customer specifications. Thanks to its modular configuration, you can construct prototypes and special versions in line with your requirements. To match the housings, aluminum front panels are available in silver or black anodized.
Customer-specific functionality can be achieved by using the components supplied in the kit (pushbutton, selector switch, key-operated switch, handwheel, enabling switch, KE joystick, etc). For connection to the control system, cables with different numbers of wires, plug connectors and the relevant flange sockets are available. The type of protection IP 65 can be achieved using one of the seals included.
38
Hand-held Pendant Stations HBM Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
TopshellHBMf Materialplasticf Coloranthracite
Dependingonversion:f HoleforhandwheelHKB
Notes fSuitable front panels see page 40
92
13,6
195
A
A
7
15,0
5
5,53
A-A92
195
A
A
Dimensiondrawing
Seal
Top shellHBM-112991
Top shellHBM-112986
Hole for handwheel HKB (handwheel HKB see page 62)
OrderingtableItem Orderno.
Top shell HBM-112991 without hole for handwheel HKB 112991
Top shell HBM-112986 with hole for handwheel HKB 112986
39
Hand-held Pendant Stations HBM Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
BottomshellHBMf Materialplasticf Coloranthracite
Dependingonversion:f Holeforemergencystopdevice(sealed with blind plug)
f HoleforenablingswitchZXE(3-stage, 2 NO contacts)
f 2pushbuttons,2-stage,1NOcontacteach,e.g.forenablingfunction
Notes fSuitable emergency stop device (turn or pull to reset) see page 54 fSuitable enabling switch ZXE (3-stage, 2 NO contacts) see page 55 f Technical data of pushbutton see page 48
92
7
40
3 x
40 (=
120
)
40
47
66,5
64
44
22,5
27,5
62
162,
5
5
37,4
32
195
48
22
Dimensiondrawing
Mounting magnet Hole for enabling switch ZXE (optional) Enabling switch ZXE see page 55
Hole for emergency stop with blind plug (optional)
Pushbutton (optional)
Cable gland (included)
Version with emergency stop device and 2 pushbuttons
Version with emergency stop device and enabling switch ZXE
Cable gland (included)
Mounting screws (8 x included)
Mounting screws (8 x included)
Orderingtable
Version/item
Features
Orderno.Holeforemergencystopdevice
2pushbuttons,*2-stage,1NOcontacteach
pre-assembled,e.g.forenablingfunction
HoleforenablingswitchZXE**
S1,S2 S1Bottom shell HBM-112949(without holes, without pushbutton) 112949
Bottom shell HBM-112954 112954
Bottom shell HBM-112958 112958
Bottom shell HBM-112955 112955
122
1233
* Travel diagram see page 6** Travel diagram see page 55
40
Hand-held Pendant Stations HBM Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
FrontpanelsfortopshellHBMwithandwithouthandwheelNotes
fSuitable for top shell HBM (see page 38)
67,4
87,4
(182
,4)
87,4
106,
4
Dimensiondrawing
Material thickness 0.5 mm
Rear is coated so as to be self-adhesive
Material thickness 0.5 mm
Rear is coated so as to be self-adhesive
For top shell HBM without handwheel
For top shell HBM with handwheel
OrderingtableItem Orderno.
Front panel for top shell HBM without handwheel, silver anodized 113060
Front panel for top shell HBM without handwheel, black anodized 113438
Front panel for top shell HBM with handwheel, silver anodized 113061
Front panel for top shell HBM with handwheel, black anodized 113440
TechnicaldataParameter Value UnitFront-panel material Electrically anodized aluminum, black or silver, rear side with self-adhesive coating
41
Hand-held Pendant Stations HBL Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-heldpendantstationsHBLkit
The kit is designed to match individual customer specifications. Thanks to its modular configuration, you can construct prototypes and special versions in line with your requirements. The HBL housings are shaped dif-ferently, depending on the safety components to be integrated. Depending on the version, front panels are available for use with or without handwheel.
Customer-specific functionality can be achieved by using the components supplied in the kit (pushbutton, selector switch, enabling switch, handwheel, key-operated rotary switch, KE joystick, etc). The type of protection IP 65 can be achieved using an included seal. For connection to the control system, cables with different numbers of wires, plug connectors and the relevant flange sockets are available.
Hand-heldpendantstationsHBLkit
42
Hand-held Pendant Stations HBL Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HousingHBLf Rubber-coatedmountingmagnetontherearofhousing
f Hangingclipf 6screwsforfrontpanelfasteningf Coverframeforfrontpanelf Fixingdomesforprintedcircuitboardinstallation
Dependingonversion:f FasteningnutforcableglandPg11orPg13.5
f Holeforemergencystopdevicef 2pushbuttonsZSG,2-stage,2NOcontactseach,e.g.forenablingfunction
f HoleonleftforenablingswitchZSE
Notes f Emergency stop devices see page 56 f Enabling switch ZSE see page 57 fCable glands see page 53 f Assembly drawings see page 75 f Pg 11 for cable diameter 5 ... 10 mm f Pg 13.5 for cable diameter 6 ... 12 mm
∅D
Dimensiondrawing
Hanging clip
View A
A
Mounting magnet
Screw-in depth max. 6.0 (applies to all mounting holes)
Hole for enabling switch ZSE2-4
Pushbutton ZSG on both sides
TechnicaldataParameter Value UnitHousingHBLMaterial PlasticColor Blue-gray RAL 7031Ambient temperature 0 ... +55 °CDegree of protection according to EN 60529 / NEMA IP 65 / 250-12PushbuttonZSG,2-stage,e.g.forenablingfunctionSwitching elements 2, 2 NO contacts eachUtilization category according to IEC 947-5-1 AC-15 Ue 24 V Ie 4 A
DC-13 Ue 24 V Ie 3 A
43
Hand-held Pendant Stations HBL Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Orderingtable
Version/item
Features
Orderno.
Fixingnutforcablegland
(cable gland see page 53)
Holeforemergencystop*
(emergency stop see page 56)
HoleforenablingswitchZSE2-2C1692,
3-stage2NO+1NC
(enabling switch page 57)
HoleforenablingswitchZSE2-4C1943,
3-stage2NO+2NC
(enabling switch page 57)
2pushbuttonsZSG,2-stage,
2NOcontactseachpre-assembled,
e.g.forenablingfunctionPg11 Pg13.5
HousingHBL-073098 073098
HousingHBL-072630 072630
HousingHBL-073113 073113
HousingHBL-072631 072631
HousingHBL-073109 073109
HousingHBL-072632 072632
HousingHBL-072983 072983
HousingHBL-083484 083484
* Blind plug ∅ 22 for emergency stop device hole included
44
Hand-held Pendant Stations HBL Kit
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
31
Front-panel flat seal
Front panel with hole for
handwheel mounting
Front panel without hole for
handwheel mounting
Front panel
Flat seal
Mounting hole for handwheel HKD (handwheel HKD see page 66)
FrontpanelforhousingHBL
OrderingtableItem Orderno.
HBL front panel, with seal 073138
HBL front panel, with hole for handwheel HKD and seal 073139
Front seal for HBL front panel 072641
TechnicaldataParameter Value UnitFront-panel material Electrically anodized aluminum, black, NBR, self-adhesive on one side
45
Accessories for Hand-held Pendant Stations HBA
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Flangeconnector,26-pin
+Ø 4,2 0
0,5
130
Ø30
58,8
SW24SW24
2512
3
45
6
78
9
10
1112
13
14
23
22
2126
20
18
19
17
16 15
24
Connectionkitfor designs HBA-102434 and HBA-103037, consisting of 26-pin flange connector and short-circuit plug
Short-circuitplug,26-pinfor flange connector, 26-pin(bridged pin 1 with pin 4 and pin 2 with pin 3)
Maleflangeconnector,19-pinwithsocketcontacts
Maleflangeconnectorfor designs HBAS-072949 and HBAS-094594
Panel cut-out
M23
x 1
1,5
121,3
25
19,8
∅ 2,7
19,8 25 ∅ 2
0
19,8
19,8
∅ 2,7
M27
x 1
2
21,3 1
3023
30
Ø 3,2
23
Panel cut-out
23
23
∅ 3,2
∅ 24
+0,1
Flat seal
TechnicaldataParameter ValueFlangeconnectorHousing material MetalDegree of protection according to EN 60529 (inserted) IP 67Contact material Copper alloyConnection Soldered connectionShort-circuitplugHousing material MetalNumber of pins 26Degree of protection according to EN 60529 (inserted) IP 67Contact material Copper alloy
OrderingtableItem Orderno.Flange connector and short-circuit plug 103042
TechnicaldataParameter ValueHousing material MetalNumber of pins 19Degree of protection according to EN 60529 (inserted) IP 65Contact material Copper alloyConnection Soldered connection
OrderingtableItem Orderno.Male flange connector, 19-pin with socket contacts 092374
46
Accessories for Hand-held Pendant Stations HBA
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
47
Accessory Kit for all Designs of Hand-held Pendant Station
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Overviewofaccessoriesforhand-heldpendantstationkits
Accessoriesforkit
Accessories
PageEMERGENCY-STOPdevice
Pushbutton Selectorswitch Key-operatedrotaryswitch
Enablingswitch,3-stage
Plugconnector Connectioncables
Suitable
for
alldesigns
48
49/50
50
51
52/53
Hand-heldpendantstations
HBA/HBM
54
55
Hand-heldpendantstations
HBL
56
57
48
Accessory Kit for all Designs of Hand-held Pendant Station
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
Pushbutton
Control panel thickness max. 3 mm
Panel cut-out Fixing nut Packing ring
Dimensiondrawing
Illuminatedpushbutton(can be individually labeled)
SW14
5,15
6
∅16
,8
M12
x1
∅13
,65
12,5 2
∅13
,60
12,90
∅15
1
1 3
2 4
a
b
-
+
10,5 29 18
15 +0,05 0
1,7
0 -0,1
16+
0,2
0
Ø18
max. 6,5
18
Panel cut-out Wiring diagram
TechnicaldataParameter Value UnitAmbient temperature -25 ... +70 °CFront degree of protection (integrated in front panel) IP 67Switching principle Button, snap-action switching elementSwitching elements 1 NO contactSwitching voltage 30 V DCSwitching current max. 100 mAConnection Soldered connection
OrderingtableItem Orderno.Pushbutton, black button 083640Pushbutton, red button 086753Pushbutton, green button 086754Pushbutton, blue button 086757Pushbutton, white button 086755Pushbutton, yellow button 086756
TechnicaldataParameter Value UnitAmbient temperature -25 ... +55 °CFront degree of protection (integrated in front panel) IP 65Switching principle Button, snap-action switching elementSwitching elements 1 NO contact, 1 NC contactSwitching current max. 100 mASwitching voltage max. 30 V AC/DCLED 24 V / 14 mAConnection Soldered connection
OrderingtableItem Orderno.Pushbutton, illuminated, can be individually labeled (yellow LED) 074991Pushbutton, illuminated, can be individually labeled (white LED) 098045
49
Accessory Kit for all Designs of Hand-held Pendant Station
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
Graycodeselectorswitch (ordering table see page 50)
View of soldered side
5,2
Ø 6
,2
Ø=
3,2
5,6
10,6 8,9 3,0
0,4
M6x0,75
8
8
5
10
8
20
1,5A
C
B
D
1
2
Panel cut-outSeal mounted
1 + 2: Power supply(connected on printed circuit board)
A, B, C, D: Switch outputs
Dimensiondrawing
Selectorswitch1ofX (ordering table see page 50)
View of soldered side
8
8
5
Ø=
3,2
5,6
11,0 8,5 3,5
0,4 5,2 Ø 6
,2
M6x0,751,5
10
7,8
11,
6 19,
2 27,
2
2
1
14 13
3
4
Panel cut-outSeal mounted
1 - 4: Switch outputs13 + 14 power supply
CodetableswitchwithGraycodeDetentposition
OutputD C B A
1 0 0 0 02 0 0 0 13 0 0 1 14 0 0 1 05 0 1 1 06 0 1 1 17 0 1 0 18 0 1 0 09 1 1 0 0
10 1 1 0 111 1 1 1 112 1 1 1 013 1 0 1 014 1 0 1 115 1 0 0 116 1 0 0 0
Connections A - D: Switch outputsConnections 1 - 3: Power supply
Circuitdiagramsswitch1ofX
1of2 1of3 1of4
2
113
14
1
3
213
14
1
3
213
14
4
Detentposition
Output1 2
1 1 02 0 1
Detentposition
Output1 2 3
1 1 0 02 0 1 03 0 0 1
Detentposition
Output1 2 3 4
1 1 0 0 02 0 1 0 03 0 0 1 04 0 0 0 1
TechnicaldataParameter Value UnitFront degree of protection (integrated in front panel) IP 67Center point fixing M6 x 0.75Detent positions 2, 3, 4, 5, 6, 7, 8, 12 or 16 depending on itemDetent angle Gray code 22.5° / 1 of X: 30° Output code 1 of 2, 1 of 3, 1 of 4 or Gray code depending on itemBreaking capacity max. 0.2 VASwitching voltage max. 25 V AC/DCConnection Soldered connection on printed circuit boardMax. soldering time ≤ 5 (at t ≤ 260 °C) s
50
Accessory Kit for all Designs of Hand-held Pendant Station
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
Key-operatedrotaryswitch
C
Amax.4.5
2735
11.5
14.6
18
Panel cut-out
15
1.7
min18.
1 3
2 4
CA
Connection circuit diagram
Dimensiondrawing
Rotaryknob
16
∅3,
2
∅14
,5
3,8 1
∅10
∅7
∅11
∅18
,7
3,5
∅17
2,7
Nut covering
OrderingtableItem Detentangle Orderno.Selector switch, 2 detent positions, 1 of 2, break-before-make 1) 30° 097026Selector switch, 3 detent positions, 1 of 3, break-before-make 1) 30° 097027Selector switch, 4 detent positions, 1 of 4, break-before-make 1) 30° 097028Selector switch, 5 detent positions, Gray code, short circuited 2) 22.5° 097029Selector switch, 6 detent positions, Gray code, short circuited 2) 22.5° 097030Selector switch, 7 detent positions, Gray code, short circuited 2) 22.5° 097031Selector switch, 8 detent positions, Gray code, short circuited 2) 22.5° 097032Selector switch, 12 detent positions, Gray code, short circuited 2) 22.5° 097033Selector switch, 16 detent positions, Gray code, short circuited 2) 22.5° 097034Rotary knob, matt black with a marking, collet mounting for axis 3.2 mm – 097141
1) break-before-make: all outputs are open between the switch positions.
2) short circuited: the related outputs are connected between the switch positions.
TechnicaldataParameter Value UnitAmbient temperature -25 ... +55 °CFront degree of protection (integrated in front panel) / NEMA IP 65 / 250-12Switching principle Snap-action switching elementSwitching element 1 NO contact, 1 NC contactSwitching voltage max. 30 V AC/DCSwitching current max. 250 mAConnection Soldered connection
OrderingtableItem Orderno.Key-operated rotary switch Key removable in both positions 083639Replacement key 092386
51
Accessory Kit for all Designs of Hand-held Pendant Station
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
Built-in
On the rear On the front
Plugconnector
Flangeconnectors
Dimensiondrawing
Short-circuitplug
L
∅D
LK
Lug for M3 screw
3 strands enclosed(0.34 mm²/60 mm long)
Numberofpins D L CableØ
35 40.2 103 8.0 - 12.028 37.2 97 8.0 - 12.023 33.9 91 6.0 - 10.012 27.5 81 5.5 - 9.5
Numberofpins A Bmax Cmax Dmax Gmax L M N P
35 34.9 14.6 17.3 25.7 39.9 31.8 34.1 37.7 3.128 31.7 14.6 17.3 25.7 36.8 29.4 30.9 34.5 3.123 28.5 11.4 13.3 24.1 33.6 27 27.8 31.3 3.112 22.2 11.4 13.3 24.1 28.8 22.9 21.4 25 3.1
Numberofpins D L LK
35 40.2 84 25528 37.2 78 25523 33.9 72 25212 27.5 59.4 251
TechnicaldataParameter Value UnitConnectingplug/flangesocketHousing material MetalNumber of pins 12 / 23 / 28 / 35Degree of protection according to EN 60529 (inserted) / NEMA IP 65 / 250-12
OrderingtableItem Connection Orderno.Plug connector, 35-pin with pin contacts Crimp contacts (included) * 074395Plug connector, 28-pin with pin contacts Crimp contacts (included) * 074394Plug connector, 23-pin with pin contacts Crimp contacts (included) * 074393Plug connector, 12-pin with pin contacts Crimp contacts (included) * 086748Flange socket, 35-pin with socket contacts Crimp contacts (included) * 074386Flange socket, 28-pin with socket contacts Crimp contacts (included) * 074385Flange socket, 23-pin with socket contacts Crimp contacts (included) * 074384Flange socket, 12-pin with socket contacts Crimp contacts (included) * 086749Short-circuit plug with chain, 35-pin Crimp contacts (included) * 083459Short-circuit plug with chain, 28-pin Crimp contacts (included) * 083458Short-circuit plug with chain, 23-pin Crimp contacts (included) * 083457Short-circuit plug with chain, 12-pin Crimp contacts (included) * 087802
* Suitable crimping tool Burndy (www.burndy.com) Y16RCM Crimping tool for machined contacts Suitable extraction tool Burndy (www.burndy.com) RX2025GE1 Extraction tool
52
Accessory Kit for all Designs of Hand-held Pendant Station
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensionsofcoiledversion
Viewofcablecross-section
Cablecoiledandstraight
∅C
B
∅D
A
1000 400
Coiled cable length stretched
GN
RDBU
GYPK
PK
VTYE
BU
BK
WH
GY
BN RD
Outer sheath: Matt black PUR
Outer screen
12 x 0.14 mm²
Filling
12-core 23-core 35-core
YEWH
GNWH
WH
GY GYPKPK RDBU
BUBNYE BNGN
RD
BK GYWH
BNGY
GN
RDWHVT
BUWHBNPK
WHPK
BNYE
BNBU
23 x 0.14 mm²
GNWH
BNGN
YEWH
BNYE
GYWH
BNGY
WHPKBUWH
BNBU
RDWH
YE
GY
PK
RDBU GYPK
BNPK
GN
BNRD
BKBN
GNGY
YEGY
BKWH
BKGNGNPK
YEPK
GNBUYEBU
RDGNRDYE
BN
BU
WH
RD
VT
BK
Outer sheath: Matt black PUR
Outer screen
35 x 0.14 mm²
TechnicaldataParameter Value UnitCable resistance ≤ 145 Ω/kmTest voltage core / core 1.0 kVrmsTest voltage core / screen 1.0 kVrmsInsulation resistance 12-core and 23-core ≥ 200
MΩ35-core ≥ 20
Operating temperature -10 ... +70 °CBending radius once ≥ 10 x cable diameter
several times ≥ 15 x cable diameter
Orderingtable
ItemCablelength A B ∅C ∅D
Orderno.[mm] [mm] [mm] [mm] [mm]
12-core, coiled cable 3,900 Approx. 2,500 550 ± 20 6 ± 0.3 8 ± 2 08672112-core, coiled cable 5,400 Approx. 4,000 880 ± 20 6 ± 0.3 8 ± 2 08672212-core, straight cable 3,500 – – – – 08737912-core, straight cable 5,000 – – – – 08738012-core, straight cable 10,000 – – – – 08738123-core, coiled cable 3,900 Approx. 2,500 550 ± 20 7.5 ± 0.3 10 ± 2 08740823-core, coiled cable 5,400 Approx. 4,000 880 ± 20 7.5 ± 0.3 10 ± 2 08740923-core, straight cable 3,500 – – – – 08738223-core, straight cable 5,000 – – – – 08738323-core, straight cable 10,000 – – – – 08738435-core, coiled cable 3,900 Approx. 2,500 550 ± 20 8 ± 0.5 10 ± 2 09719035-core, coiled cable 5,400 Approx. 4,000 880 ± 20 8 ± 0.5 10 ± 2 09719135-core, straight cable 3,500 – – – – 09718935-core, straight cable 5,000 – – – – 09718835-core, straight cable 10,000 – – – – 097187
53
Accessory Kit for all Designs of Hand-held Pendant Station
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
M
GL H
SW
Cableglandwithanti-kinkspiral
OrderingtableItem Orderno.Cable gland M16x1.5 with anti-kink spiral, color black 083641Cable gland Pg 11 with anti-kink spiral and fixing nut, color black 073982Cable gland Pg 13.5 with anti-kink spiral and fixing nut, color black 073983
OrderingtableThreadM Use Cablediameter SW GL HM16x1.5 Kit HBA/HBM 5 - 10 22 8 71
Pg 11 Kit HBL 5 - 10 22 11 71Pg 13.5 Kit HBL 6 - 12 24 12.5 81
54
Accessory Kit for Hand-held Pendant Stations HBA/HBM
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
EMERGENCYSTOPdevicesaccordingtoENISO13850f Withpull-to-resetbuttonf EMERGENCYSTOPdeviceforhousingHBA/HBMwithoutenablingswitchZXE,3-stage
Notes f The EMERGENCY STOP device engages when actuated by pressing, unlocks when pulled, and is overload-proof fDo not use with housing HBA/HBM with 3-stage enabling switch ZXE
f Withturn-to-resetbuttonf EMERGENCYSTOPdeviceforhousingHBA/HBM
f Bottomofhousingyellow
Notes f The EMERGENCY STOP device engages when actuated by pressing, unlocks when turned or pulled, and is tamper proof
DimensiondrawingPanel cut-out
Front panel thickness
49
40 37,5
<Ø
28>
5 1225
25
2,8
<18>
18
6.
<0,
8>
Ø 16,2 0+0,2
Panel cut-out
Terminal assignment
Socket yellow
Pushbutton red
3,6
0,8 - 4,5
15,9 20,6
10,2
0,5
16,2 0+0,2
3,2 0+0,2
17,9
0+0,2
12
21
22
11
2,8
5,4
29
Socket yellowPushbutton red
TechnicaldataParameter Value UnitActuatingelementColor of actuating button RedColor of bottom part YellowSwitching elements 2, one positively driven contact eachDegree of protection IP 65Utilization category according to IEC 947-5-1 DC-13 Ue 24 V Ie 3 A
TechnicaldataParameter Value UnitActuatingelementColor of actuating button RedColor of bottom part YellowSwitching elements 2 positively driven contactsDegree of protection IP 65Connection ratings 24 V DC / 3 A
OrderingtableItem Orderno.EMERGENCY STOP device (pull-to-reset button) with 2 switching elements, 1 positively driven contact each, long design 096298EMERGENCY STOP device (pull-to-reset button and turn-to-reset button), 2 positively driven contacts, short design 106435Blind plug for EMERGENCY STOP device mounting hole 083653
Terminal assignment
55
Accessory Kit for Hand-held Pendant Stations HBA/HBM
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Wiringdiagrams/functionsequenceZXE
Contactopenclosedclosed, enabling
C2NO2
1/3 2/4C1
NO1E1
2202
1/3 2/4
E2
2202
Not actuatedNO NO1 1
2 2
3
1233
E1, E2
2202
NO
Not actuated
Enabling
Actuating point
Panic function
Restart protection
Dimensiondrawing
EnablingswitchZXE-091336,3-stage,2NOcontactsNotes
f Enabling switch ZXE-091336 for use in housing HBA/HBM (see page 31/33/35/39)
Switchingelementsf 2202 2 NO
14
1 - 5
29
27,5
10
M22 x 1 20
NO 1 C1 C2
43,5
13,2
18
24,8
14 20,5
22,5
NO 2
Connections for the working contacts
Panel cut-out
Dimensiondrawing
EnablingswitchZXE-104833withclick,3-stage,2NOcontactsNotes
f Enabling switch ZXE-104833 for use in housing HBA/HBM (see page 31/33/35/39) f A click sounds during the change from stage 1 to stage 2 and during the return from stage 2 to stage 1.
Switchingelementsf 2202 2 NO
20,5
22,5
M22x1
27,5
10
1 - 5
1434
33,51,2
18,5
22,6
14,5
20
N01 C1 N02 C2
Connections for the working contacts
Panel cut-out
TechnicaldataParameter Value UnitHousing material Polyamide, blackProtective cap material CR (neoprene), blackDegree of protection according to IEC 529 IP65 on frontAmbient temperature - 5 ... + 60 °CSwitching principle Slow-action contact elementUtilization category according to IEC 947-5-1 DC-13 Ue 24 V Ie 0.1 AWeight Approx. 0.03 kg
OrderingtableItem Particularity Switchingcontacts Switchtype Orderno.ZXE-091336 - 2 NO contacts Dual-channel 091336ZXE-104833 Click noise on operation 2 NO contacts Dual-channel 104833
56
Accessory Kit for Hand-held Pendant Stations HBL
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
EMERGENCYSTOPdevice,22mmwithpull-to-resetbuttonaccordingtoENISO13850Notes
f The EMERGENCY STOP device engages when actuated by pressing, unlocks when pulled, and is overload-proof fUsage only for the following housings: f HBL-072631 f HBL-072983 f HBL-073113 f HBL-083484
Panel cut-out
Switching element
Actuating button
Self-adhesive label, yellow
Fastening adapter
TechnicaldataParameter Value UnitColor of actuating button RedColor self-adhesive label YellowSwitching element 2 NC contactsUtilization category according to IEC 947-5-1 DC-13 Ue 24 V Ie 2.75 A
OrderingtableItem Orderno.EMERGENCY STOP device, complete with switching elements (2 x NC contacts), pull-to-reset button 073985Blind plug for EMERGENCY STOP device mounting hole 059622
57
Accessory Kit for Hand-held Pendant Stations HBL
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
Dimensiondrawing
EnablingswitchZSE2-2,3-stage,1positivelydrivencontact
EnablingswitchZSE2-4,3-stage,2positivelydrivencontacts
E1
E3
E2
∅40
1..4
3031
30
∅35
15
60
View without- Sealing cap- Round nut- Control panel
E1
E3
E2
E4
∅40
1..4
3031
30
∅35
15 77
60
View without- Sealing cap- Round nut- Control panel
Notes f Enabling switch ZSE2-2 C1692 for use in housings HBL-073109 and HBL-072632 (see page 42)
Switchingelementsf 210 2 NO + 1 NC
Notes f Enabling switch ZSE2-4 C1943 for use in housings HBL-072983 and HBL-083484 (see page 42)
Switchingelementsf 220 2 NO + 2 NC
Wiringdiagrams/functionsequenceZSE2-2andZSE2-4
Contactopenclosedclosed, enabling
34
3 4
3 4
34
1 212
E1
E2
E3
ZSE 2-2
34
3 4
3 4
34
1 212
1 212
E1
E2
E3
E4
ZSE 2-4
Not actuatedNONC
ZSE2-2 ZSE2-4E3
E1, E2E3, E4E1, E2
NONC NC
NO1 1
2 2
3
1233
Not actuated
Enabling
Actuating point
Panic function
Restart prevention
Wiring diagram see below
Wiring diagram see below
TechnicaldataParameter Value UnitHousing material PlasticFastening hole ∅ 30.5 +0.5 mmDegree of protection according to IEC 529 IP65 on frontAmbient temperature - 5 ... + 60 °CSwitching principle Slow-action contact elementUtilization category according to IEC 947-5-1 AC-15 Ue 24 V Ie 4 A
DC-13 Ue 24 V Ie 3 AWeight Approx. 0.1 kg
OrderingtableItem Switchingcontacts Switchtype Orderno.ZSE2-2 C 1692 2 NO contacts + 1 pos. driven contact Single-channel 070752ZSE2-4 C 1943 2 NO contacts + 2 pos. driven contact Dual-channel 083477
58
Holders for Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HolderHBA
Dimensiondrawing
60
43,5
66
93A
A
10,5 4,2
56
8,5
A-A
Enlarged handwheel cut-out
TechnicaldataParameter Value UnitHousing material PlasticFixing system ScrewsAmbient temperature -5 to +60 °CWeight Approx. 0.1 kg
OrderingtableItem Orderno.Holder HBA gray 072828Holder HBA black 100221Holder HBA gray, enlarged handwheel cut-out * 072935Holder HBA black, enlarged handwheel cut-out * 109979
* Operation of the handwheel in the holder possible
Dimensiondrawing
HolderHBM
60
43,5
67,5
12
95
A
A11
,5
90°
8,5
4,3
67
TechnicaldataParameter Value UnitHousing material PlasticFixing system ScrewsAmbient temperature -5 to +60 °CWeight Approx. 0.1 kg
OrderingtableItem Orderno.Holder HBM 112335
Dimensiondrawing
HolderHBL
62
60
94
7517
5
248
35
45°
104
1306
∅5,
5
10,4
90°
9521
4
92
TechnicaldataParameter Value UnitHousing material PlasticFixing system ScrewsAmbient temperature -5 to +60 °CWeight Approx. 0.1 kg
OrderingtableItem Orderno.Holder HBL 084397
59
Holders for Hand-held Pendant Stations
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
60
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
FunctionandtechnologyusedinhandwheelsDaily use of handwheels places high demands on the mechanical function-ing. With twin bearings and a wear-free detent mechanism, the EUCHNER handwheels are the optimum choice for trouble-free operation. The detent moment maintains position even in the event of machine vibration. The detent moment and 100 or 25 pulses per revolution allow a desired value to be set quickly, reliably and accurately. In addition to the manual positioning of axes with CNC-controlled machines, EUCHNER also offers handwheels used for medical and telecommunication applications. EUCHNER also offers handwheels for these applications.
The change from a handwheel directly coupled to the spindle or axes to CNC-controlled axes has meant dramatic new developments for the handwheels. The rotation of the handwheel generates square-wave outputs. The CNC axis controller evaluates the pulses and so signals the axis to move. With over 20 years of handwheel experience, EUCHNER provides a wide selection of handwheels built with the finest quality and highest possible reliability.
61
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
f Design HKC - Suitable for installation in operator panels - Its design makes it particularly suitable for flat operator panels
Handwheel HKD
Handwheel HKB
f Design HKD - Suitable for installation in operator panels and EUCHNER hand-held pendant stations from series HBL - Suitable for installation in universal turning and milling machines for axis movement, for example
MechanicaldetentmechanismHandwheels with mechanical detent are characterized by their light weight and shallow mounting depth.
With100detentpositions(100or25pulses)A toothed rotor working in conjunction with a roller creates the detent mechanism. The roller is pushed between the teeth of the rotor by a spring and dial. The detent moment is produced by the movement of the roller over the teeth.
There are two different designs available: f Design HWA
- Suitable for installation in operator panels. - Suitable for installation in EUCHNER hand-held pendant stations - With center point fixing
Handwheel HWA
f Design HWB - Suitable for installation in operator panels - With 3-point fixing
Handwheel HWB
MagneticdetentmechanismHandwheels with magnetic detent are characterized by their absolutely wear-free and noiseless detent mechanism.
With100detentpositions(100or25pulses)The detent mechanism is generated by a magnetic field. A combination of 100 magnetic north/south positions is generated by the opposing mag-netic fields with one revolution of the handwheel. Thanks to an air gap, the detent mechanism has no wear and is absolutely maintenance-free. With two ball bearings, the bearing assembly of the handwheel can withstand high axial and radial forces. Different circuit outputs are available for all current control systems.
There are three different designs available:
f Design HKB - Ideal for flat machine panels and small, light hand-held pendant stations.
Handwheel HKC
62
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HandwheelHKB
Dimensiondrawingf 100detentpositionsperrevolutionf Wear-freemagneticdetentmechanismf 100or25pulsesperrevolutionf Keyfunctioninaxialdirectionoptionalf Idealforflatoperatorpanelsandsmall,lighthand-heldpendantstationslikeHBA/HBM
Notes fOutput A05 suitable for Siemens control sys-tems with RS422 input fOutput G05 suitable for Fanuc control systems fDial: see accessories page 72 f Front panel: see accessories page 72
15,5
13,8
13,5
23
26,5
45
23,4
8
2
25
Panel cut-out
SW17Seal
<26,5> 24,5
8 4225
31
0,81
23
15,5
13,8
1,5
Panel cut-out
Actuating travel 0.5 mm
Screen connection
SW17
Seal
Version with key function
Control panel thickness 1.5 - 4 mm
Orderingtable
Series Numberofpulsesperrevolution Connection Detentpositions Outputs OrderNo./item
HKB
25 SScrew terminal 100
G12Push-pull 5 V
UB = 10 ... 30 V DC
105137HKB025S7G12
100 SScrew terminal 100
A05RS422A
UB = 5 V DC
105134HKB100S7A05
A12RS422A
UB = 10 ... 30 V DC
105135HKB100S7A12
G055 V push-pullUB = 5 V DC
105136HKB100S7G05
G24Push-pull 10...30 VUB = 10 ... 30 V DC
105138HKB100S7G24
HKBwithkeyfunction 100 S
Screw terminal 100A05
RS422AUB = 5 V DC
109429HKB100S7A05K
63
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
TechnicaldataParameter Value UnitPulses per revolution 2 x 25 or 2 x 100Detent positions 100Housing material AluminumWeight 0.095 kgDetent mechanism MagneticShaft loading, axial, max. 25 NShaft loading, radial, max. 40 NMechanical life, min. 5 x 106 Rev.Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CAtmospheric humidity, max. 80% (condensation not permissible)Front degree of protection acc. to EN 60529/IEC 529 IP 65
acc. to NEMA 250 250-12Resistance to vibrationVibrations (3 axes)Shock (3 axes)
DIN/IEC 68-2-6DIN/IEC 68-2-27
EMC protection requirements in accordance with CE EN 61000-6-2, EN 61000-6-4KeyfunctionMechanical life, min. 1 x 106 actuationsActuating travel 0.3 ... 0.7 mmSpecificationoutputOUT Output stage
A05/G05 A12/G12/G24Operating voltage UB DC 5 V ± 5 % DC 10 ... 30 VOutput voltage HIGH (1), min. 4.0 V/0 mA –
3.4 V/5 mA –3.0 V/20 mA UB - 3 V/20 mA
LOW (0), max. 1.3 V/15 mA 3 V/20 mAOutputcircuitRS422AOutput stage A05 A12Output signals A, /A, B, /BOperating voltage UB 5 ± 5 % 10 ... 30 V DCOperating current, no load, max. 80 mAOutput circuit According to RS422A, use RS422 differential receiver moduleOutput signals cw (clockwise rotation) 25 pulses
90˚360˚
A
/A
B
/B
100 pulses
200 µs 400 µs
800 µs
A
/A
B
/B
Terminal assignment Screw terminal, 7-pin, conductor cross-section 0.08² ... 1.5² (AWG 22 ... 16)Tightening torque, max. 0.5 Nm
without key function
U B 0V A B/A /B
with key function
U B 0V A B Out
Outputcircuit,push-pullOutput stage G05 G12 G24Output signals A, BOperating voltage UB 5 ± 5 % 10 ... 30 V DCOperating current, no load, max. 80 mAOutput voltage HIGH (1), min. 4.0 V / 0 mA 4.9 V / 0 mA –
3.4 V / 5 mA 3.9 V / 5 mA –3.0 V / 20 mA 3.6 V / 20 mA UB - 3 V / 20 mA
LOW (0), max. 1.3 V / 15 mA 1.3 V / 15 mA 3 V / 20 mAOutput current per output, max. 20 mAOutput signals cw (clockwise rotation) 25 pulses
90°360°
A
B
100 pulses
200 µs 400 µs
800 µs
A
B
Terminal assignment Screw terminal, 7-pin, conductor cross-section 0.08² ... 1.5² (AWG 22 ... 16)Tightening torque, max. 0.5 Nm
without key function
U B 0V A B
with key function
U B 0V A OutB/A /B
64
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HandwheelHKC
Dimensiondrawingf 100detentpositionsperrevolutionf Wear-freemagneticdetentmechanismf 100or25pulsesperrevolutionf Flatdesign
Notes fOutput A05 suitable for Siemens control sys-tems with RS422 input fOutput G05 suitable for Fanuc control systems
<39>
63
9.
<46
>M
3
31
73
8078
47
72 ±0,1
3,4
120°
3 x 120° (=360°)
Color gray
Panel cut-out
Control panel thickness 2 - 6 mm
Orderingtable
Series Numberofpulsesperrevolution Connection Detentpositions Outputs OrderNo./item
HKC
25 SScrew terminal 100
G12Push-pull 5 V
UB = 10 ... 30 V DC
072940HKC025S100G12
100 SScrew terminal 100
A05RS422A
UB = 5 V DC
087733HKC100S100A05
G05Push-pull 5 VUB = 5 V DC
082573HKC100S100G05
G24Push-pull 10...30 VUB = 10 ... 30 V DC
087739HKC100S100G24
65
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
TechnicaldataParameter Value UnitPulses per revolution 2 x 25 or 2 x 100Detent positions 100Housing material Plastic/metalWeight 0.25 kgDetent mechanism MagneticShaft loading, axial, max. 25 NShaft loading, radial, max. 40 NMechanical life, min. 5 x 106 Rev.Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CAtmospheric humidity, max. 80% (condensation not permissible)Front degree of protection acc. to EN 60529/IEC 529 IP 65
acc. to NEMA 250 250-12Resistance to vibrationVibrations (3 axes)Shock (3 axes)
DIN/IEC 68-2-6DIN/IEC 68-2-27
EMC protection requirements in accordance with CE EN 61000-6-2, EN 61000-6-4OutputcircuitRS422AOutput stage A05Output signals A, /A, B, /BOperating voltage UB 5 ± 5 % V DCOperating current, no load, max. 80 mAOutput circuit According to RS422A, use RS422 differential receiver moduleOutput signals cw (clockwise rotation) 25 pulses
90˚360˚
A
/A
B
/B
100 pulses
200 µs 400 µs
800 µs
A
/A
B
/B
Terminal assignment Screw terminal S
U B 0V A B/A /B
Outputcircuit,push-pullOutput stage G05 G12 G24Output signals A, BOperating voltage UB 5 ± 5 % 10 ... 30 V DCOperating current, no load, max. 80 mAOutput voltage HIGH (1), min. 4.0 V / 0 mA 4.9 V / 0 mA –
3.4 V / 5 mA 3.9 V / 5 mA –3.0 V / 20 mA 3.6 V / 20 mA UB - 3 V / 20 mA
LOW (0), max. 1.3 V / 15 mA 1.3 V / 15 mA 3 V / 20 mAOutput current per output, max. 20 mAOutput signals cw (clockwise rotation) 25 pulses
90°360°
A
B
100 pulses
200 µs 400 µs
800 µs
A
B
Terminal assignment Screw terminal S
U B 0V A B
66
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HandwheelHKD
Dimensiondrawingf 100detentpositionsperrevolutionf Wear-freemagneticdetentmechanismf 100or25pulsesperrevolutionf InstallationinoperatorpanelsandEUCHNERhand-heldpendantstationsHBL
l
50
25
∅63
4 -0,5
∅8
2,58
18,5
9,3
16 16
∅ 4,2
min. 28,6
Sealing ring
Sealing ring E (see accessories)
Ground connection, flat pin bushing 6.3 mm x 0.8
Panel cut-out
Notes fOutput A05 suitable for Siemens control sys-tems with RS422 input fOutput G05 suitable for Fanuc control systems fDial: see accessories page 72 f Front panel: see accessories page 72
MountingdepthlConnection l[mm]Screw terminal S 55Ribbon cable, 6-pin V 53
Control panel thickness 2.5 - 8 mm
Orderingtable
Series Numberofpulsesperrevolution Connection Detentpositions Outputs OrderNo./item
HKD
25
SScrew terminal 100
G12Push-pull 5 V
UB = 10 ... 30 V DC
091525HKD025S100G12
VRibbon cable
6-pin with plug100
G12Push-pull 5 V
UB = 10 ... 30 V DC
091526HKD025V100G12
100
SScrew terminal 100
A05RS422A
UB = 5 V DC
054866HKD100S100A05
G05Push-pull 5 VUB = 5 V DC
083354HKD100S100G05
G24Push-pull 10...30 VUB = 10 ... 30 V DC
054868HKD100S100G24
VRibbon cable
6-pin with plug100
A05RS422A
UB = 5 V DC
057036HKD100V100A05
G05Push-pull 5 VUB = 5 V DC
091527HKD100V100G05
G24Push-pull 10...30 VUB = 10 ... 30 V DC
057037HKD100V100G24
67
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
TechnicaldataParameter Value UnitPulses per revolution 2 x 25 or 2 x 100Detent positions 100Housing material AluminumWeight 0.5 kgDetent mechanism MagneticShaft loading, axial, max. 25 NShaft loading, radial, max. 40 NMechanical life, min. 20 x 106 Rev.Operating temperature 0 ... +70 °CStorage temperature -25 ... +85 °CAtmospheric humidity, max. 80% (condensation not permissible)Front degree of protection acc. to EN 60529/IEC 529 IP 65
acc. to NEMA 250 250-12Resistance to vibrationVibrations (3 axes)Shock (3 axes)
DIN/IEC 68-2-6DIN/IEC 68-2-27
EMC protection requirements in accordance with CE EN 61000-6-2, EN 61000-6-4OutputcircuitRS422AOutput stage A05Output signals A, /A, B, /BOperating voltage UB 5 ± 5 % V DCOperating current, no load, max. 80 mAOutput circuit According to RS422A, use RS422 differential receiver moduleOutput signals cw (clockwise rotation) 25 pulses
90˚360˚
A
/A
B
/B
Detent position areas
100 pulses
75˚360˚
A
/A
B
/B
210˚
Detent position areaTerminal assignment Ribbon cable V Screw terminal S
1
0V
UBAB
/A/B
6 UB 0V A /A B /B
Outputcircuit,push-pullOutput stage G05 G12 G24Output signals A, BOperating voltage UB 5 ± 5 % 10 ... 30 V DCOperating current, no load, max. 80 mAOutput voltage HIGH (1), min. 4.0 V / 0 mA 4.9 V / 0 mA –
3.4 V / 5 mA 3.9 V / 5 mA –3.0 V / 20 mA 3.6 V / 20 mA UB - 3 V / 20 mA
LOW (0), max. 1.3 V / 15 mA 1.3 V / 15 mA 3 V / 20 mAOutput current per output, max. 20 mAOutput signals cw (clockwise rotation) 25 pulses
90˚360˚
A
B
Detent position areas
100 pulses
75˚360˚
A
B
210˚
Detent position areaTerminal assignment Ribbon cable V Screw terminal S
1
0V
UBAB
/A/B
6 UB 0V A B
68
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HandwheelHWA
Dimensiondrawingf 100detentpositionsperrevolutionf Mechanicaldetentmechanismf 100or25pulsesperrevolutionf Centerpointfixing
Panel cut-out
3,3 /1.7 deep
9,2
19
Color black
51
60
3025
,5
1521,826
16,548
66 ±1
Disk with adhesive film
Fixing screw
Notes fOutput A05 suitable for Siemens control sys-tems with RS422 input fOutput G05 suitable for Fanuc control systems f Packaging unit 10 pieces
Control panel thickness 1.5 - 2 mm
Orderingtable
Series Numberofpulsesperrevolution Connection Detentpositions Outputs OrderNo./item
HWAPackaging unit
10 ea.
25 TScrew terminal 100
G12Push-pull 5 VUB = 12 V DC
072972HWA025T100G12/V10
(10 ea.)
100 TScrew terminal 100
A05RS422A
UB = 5 V DC
072970HWA100T100A05/V10
(10 ea.)
G05Push-pull 5 VUB = 5 V DC
072971HWA100T100G05/V10
(10 ea.)
69
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
TechnicaldataParameter Value UnitPulses per revolution 2 x 25 or 2 x 100Detent positions 100Housing material Plastic/metalWeight 0.1 kgDetent mechanism MechanicalShaft loading, axial, max. 25 NShaft loading, radial, max. 40 NMechanical life, min. 1 x 106 Rev.Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CAtmospheric humidity, max. 80% (condensation not permissible)Front degree of protection acc. to EN 60529/IEC 529 IP65
acc. to NEMA 250 250-12OutputcircuitRS422AOutput stage A05Output signals A, /A, B, /BOperating voltage UB 5 ± 10 % V DCOperating current, no load, max. 80 mAOutput specifications According to RS422A, use RS422 differential receiver moduleOutput signals cw (clockwise rotation) 100 pulses
90˚360˚
A
/A
B
/B
Detent position areaTerminal assignment Screw terminal T
+5V 0V A A B B
Outputcircuit,push-pullOutput stage G05 G12Output signals A, BOperating voltage UB 5 ± 10 % 12 ± 10 % V DCOperating current, no load, max. 20 mAOutput voltage HIGH (1), min. 4.0 V / 20 mA
LOW (0), max. 0.5 V / 20 mAOutput current per output, max. 20 mAOutput signals CW (clockwise rotation) 100 pulses
90˚360˚
A
B
Detent position area
25 pulses
90˚360˚
A
B
Detent position areas
Terminal assignment Screw terminal T
+UB 0V A B
70
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
HandwheelHWB
Dimensiondrawingf 100detentpositionsperrevolutionf Mechanicaldetentmechanismf 100or25pulsesperrevolutionf 3-pointfixing
∅4,5
∅62
±0,
5
120°
∅72±0,1
∅60±0,5
∅721525,438
28,5
3x
∅53
∅72
∅80 ±1
41,5
Panel cut-out
Color black
Notes fOutput A05 suitable for Siemens control sys-tems with RS422 input fOutput G05 suitable for Fanuc control systems
Fixing screw M4
Control panel thickness max. 3 mm
Orderingtable
Series Numberofpulsesperrevolution Connection Detentpositions Outputs OrderNo./item
HWBPackaging unit
5 ea.
25 TScrew terminal 100
G12Push-pull 5 VUB = 12 V DC
072975HWB025T100G12/V05
(5 ea.)
100 TScrew terminal 100
A05RS422A
UB = 5 V DC
072973HWB10T100A05/V05
(5 ea.)
G05Push-pull 5 VUB = 5 V DC
072974HWB100T100G05/V05
(5 ea.)
71
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
TechnicaldataParameter Value UnitPulses per revolution 2 x 25 or 2 x 100Detent positions 100Housing material Plastic/metalWeight 0.125 kgDetent mechanism MechanicalShaft loading, axial, max. 25 NShaft loading, radial, max. 40 NMechanical life, min. 1 x 106 Rev.Operating temperature 0 ... +50 °CStorage temperature -20 ... +50 °CAtmospheric humidity, max. 80% (condensation not permissible)Front degree of protection acc. to EN 60529/IEC 529 IP65
acc. to NEMA 250 250-12OutputcircuitRS422AOutput stage A05Output signals A, /A, B, /BOperating voltage UB 5 ± 10 % V DCOperating current, no load, max. 80 mAOutput specifications According to RS422A, use RS422 differential receiver moduleOutput signals cw (clockwise rotation) 100 pulses
90˚360˚
A
/A
B
/B
Detent position areaTerminal assignment Screw terminal T
+5V 0V A A B B
Outputcircuit,push-pullOutput stage G05 G12Output signals A, BOperating voltage UB 5 ± 10 % 12 ± 10 % V DCOperating current, no load, max. 20 mAOutput voltage HIGH (1), min. 4.0 V / 20 mA
LOW (0), max. 0.5 V / 20 mAOutput current per output, max. 20 mAOutput signals CW (clockwise rotation) 100 pulses
90˚360˚
A
B
Detent position area
25 pulses
90˚360˚
A
B
Detent position areas
Terminal assignment Screw terminal T
+UB 0V A B
72
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Accessories
DimensiondrawingFrontpanelforhandwheelHKD
f Front panel with bonded seal fSeal handwheels without front panel with sealing ring E
DimensionsDesign e f g h k m n p s r
F 110 110 90 90 - - DIN74-Am5 - - R48G 108 108 89 89 - - 5.2 - - R48M 76.2 76.2 - - 65 65 4.2 - - R35.5
OrderingtableItem Orderno.Sealing ring E 054861Front panel F with seal 028760Front panel G with seal 028761Front panel M with seal 041758
een
r
f
sp
gh
k
r
m 4
Front panel F, G, M
DimensiondrawingFrontpanelforhandwheelHKB
f Front panel with bonded seal
OrderingtableItem Orderno.Front panel for handwheel HKB with dial 100914, anodized silver 105072Front panel for handwheel HKB with dial 100914, anodized black 105073
DialsforhandwheelHKB
OrderingtableItem Orderno.Dial 58 mm silver, metal with crank 1) 100914Dial 66.5 mm silver, metal with finger recess 1) 2) 111992Dial 66.5 mm black, plastic with finger recess 2) 105961
1) Suitable for installation in operator panels
2) For use of handwheel HKB in the kits for hand-held pendant stations HBA and HBM
Dimensiondrawing
58
<35,5>
40
76,2
76,2
65
65 3
1
4,3
Seal
29
13
< 66,5>
56,5
66,5
51
23
Dial 58 mm silver, 100914 Dial 66.5 mm silver, 111992 Dial 66.5 mm black, 105961
73
Electronic Handwheels
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
DialsforhandwheelHKD
DimensionsDesign ∅a ∅b cDial 90 mm 90 63 41Dial 78 mm 78 63 39Dial 75 mm 75 63 39Dial 65 mm 65 44 42Dial 58 mm 58 44 40
OrderingtableItem Orderno.Dial 90 mm black 057266Dial 90 mm silver 057268Dial 78 mm black 057280Dial 78 mm silver 057272Dial 75 mm black 072633Dial 75 mm silver 072597Dial 65 mm black, for HBL kit 057318Dial 65 mm silver, for HBL kit 057314Dial 58 mm black 059276
Dimensiondrawing
c
b a
74
Appendix
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
Dimensiondrawing
Dimensiondrawing–HBAhousingtopshellf HBAtopshellwithhandwheel
f HBAtopshellwithouthandwheel
C
C
45
335052
7,5
56,5
46,5
30
92,5
89,5
8
12,5
C-C (1 : 1)2
5,5
5 domes for fixing the board(board is 1.5 mm thick, screw 2.5 x 8)
46,5
∅8
R 32,5
55
25
125
50
52
93 92,5
28
38
∅8
∅5,
5
5,5
∅12
,5
2
1 x
45°
4 domes for fixing the board(board is 1.5 mm thick, screw 2.5 x 8)
75
Appendix
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Dimensiondrawing
Dimensiondrawing–HBMhousingtopshellf HBMtopshellwithandwithouthandwheel
7
15,0
5
5,53
A-A35
32,5
65
122,
5
6222
,5 27,5
162,
5
44
64
66,5
47
A
A
5 domes for fixing the board(board is 1.5 mm thick, screw 2.5 x 8)
Hole for handwheel HKB (optional)
Assemblydrawings
DimensiondrawingHousingsHBL-073109andHBL-072632 fMounting enabling switch ZSE2-2 C1692 (2 NO contacts, 1 positively driven contact) fNo hole for EMERGENCY STOP device
DimensiondrawingHousingsHBL-072983andHBL-083484 fMounting enabling switch ZSE2-4 C1943 (2 NO contacts, 2 positively driven contacts) fMounting EMERGENCY STOP device 073985
76
Appendix
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Request form for hand-held pendant stations HBA without handwheels
CustomerCompanyAddress
NameFirst name
TelephoneFaxE-mail
DepartmentDate
Date
Quotation
Delivery date requestedOne-off project requirementWeek
Series production requirement per yearQuantity
Signature
Special requirements
EMERGENCY STOP
2 NC contacts
Selector switch left positions Gray code
Labeling:
Without
positions 1 of X
Selector switchright positions Gray code
Labeling:
Without
positions 1 of X
Housing Gray
Black
Front foil EUCHNER Standard
Customer-specific as per attachment
Plug connector Burndy metal
Coninvers metal
Without plug connector
Other:
Enabling device
2-stage, each 1 NO, right and left
3-stage, 2 NO, left
Without
LED Without
With
Key-operatedswitch
Without
With
Joystick Without
With KE
Pushbuttons Without
3 membrane buttons
single button
Cable Coiled 1.5 m, can be streched to 3.5 m
Coiled 2.0 m, can be streched to 5.0 m
Straight: m
Toggle switch Without
With:
Further components and versions on request
77
Appendix
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Request form for hand-held pendant stations HBA with handwheels
CustomerCompanyAddress
NameFirst name
TelephoneFaxE-mail
DepartmentDate
Date
Quotation
Delivery date requestedOne-off project requirementWeek
Series production requirement per yearQuantity
Signature
Special requirements
EMERGENCY STOP
2 NC contacts
Selector switch left positions Gray code
Labeling:
Without
positions 1 of X
Selector switchright positions Gray code
Labeling:
Without
positions 1 of X
Housing Gray
Black
Front foil EUCHNER Standard
Customer-specific as per attachment
Plug connector Burndy metal
Coninvers metal
Without plug connector
Other:
Enabling device
2-stage, each 1 NO, right and left
3-stage, 2 NO, left
Without
HandwheelSee cataloguepage 33
Without
magnetic
mechanical
A05, 100 pulses, RS422
G05, 100 pulses
G12, 25 pulses
G24, 100 pulses
LED Without
With
Key-operatedswitch
Without
With
Joystick Without
With KE
Pushbuttons Without
3 membrane buttons
single button
Cable Coiled 1.5 m, can be streched to 3.5 m
Coiled 2.0 m, can be streched to 5.0 m
Straight: m
Toggle switch Without
With:
On which control system will the handwheelbe operated?
Siemens, type:
Fanuc, type:
Mitsubishi, type:
Other / brand:
Further components and versions on request
78
Appendix
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Request form for hand-held pendant stations HBM without handwheels
CustomerCompanyAddress
NameFirst name
TelephoneFaxE-mail
DepartmentDate
Date
Quotation
Delivery date requestedOne-off project requirementWeek
Series production requirement per yearQuantity
Signature
Special requirements
Further components and versions on request
EMERGENCY STOP
2 NC contacts
Selector switch left positions Gray code
Labeling:
Without
positions 1 of X
Selector switchright positions Gray code
Labeling:
Without
positions 1 of X
Enabling device
2-stage, each 1 NO, right and left
3-stage, 2 NO, left
Without
Front foil EUCHNER Standard
Customer-specific as per attachment
Plug connector Burndy metal
Coninvers metal
Without plug connector
Other:
LED Without
With
Key-operatedswitch
Without
With
Joystick Without
With KE
Pushbuttons Without
3 membrane buttons
single button
Cable Coiled 1.5 m, can be streched to 3.5 m
Coiled 2.0 m, can be streched to 5.0 m
Straight: m
Toggle switch Without
With:
79
Appendix
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Request form for hand-held pendant stations HBM with handwheels
CustomerCompanyAddress
NameFirst name
TelephoneFaxE-mail
DepartmentDate
Date
Quotation
Delivery date requestedOne-off project requirementWeek
Series production requirement per yearQuantity
Signature
Special requirements
Further components and versions on request
EMERGENCY STOP
2 NC contacts
Selector switch left positions Gray code
Labeling:
Without
positions 1 of X
Selector switchright positions Gray code
Labeling:
Without
positions 1 of X
Enabling device
2-stage, each 1 NO, right and left
3-stage, 2 NO, left
Without
HandwheelSee cataloguepage 33
Without
magnetic
mechanical
A05, 100 pulses, RS422
G05, 100 pulses
G12, 25 pulses
G24, 100 pulses
On which control system will the handwheelbe operated?
Siemens, type:
Fanuc, type:
Mitsubishi, type:
Other / brand:
Front foil EUCHNER Standard
Customer-specific as per attachment
Plug connector Burndy metal
Coninvers metal
Without plug connector
Other:
LED Without
With
Key-operatedswitch
Without
With
Joystick Without
With KE
Pushbuttons Without
3 membrane buttons
single button
Cable Coiled 1.5 m, can be streched to 3.5 m
Coiled 2.0 m, can be streched to 5.0 m
Straight: m
Toggle switch Without
With:
80
Appendix
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Hand-held pendant stations HBL request form
CustomerCompanyAddress
NameFirst name
TelephoneFaxE-mail
DepartmentDate
Date
Quotation
Delivery date requestedOne-off project requirementWeek
Series production requirement per yearQuantity
Signature
Special requirements
Logo Without
Customer-specific as per attachment
EMERGENCY STOP
2 NC contacts
1 NC contacts
Without
Key-operatedswitch
Without
With
Plug connector Burndy metal
Coninvers metal
Without plug connector
Other:
Labelingselector switches
Through scale wheels
On front plate
Front plate EUCHNER Standardblack anodizedsilver labeling
Customer-specific as per attachment
Pushbutton Without
Number of NO contacts
Number of NC contacts
Not illuminated
Symbol plate labeling as per attachment
Illuminated
Front plate labeling as per attachment
Lamp/LED Without
Customer-specific as per attachment
Potentiometer Without
Technical specification:
Cable Coiled 1.5 m, can be streched to 35 m
Coiled 2.0 m, can be streched to 5.0 m
Straight: m
3-stage, ZSE 2-4 (2 NO + 2 NC) only left
Enabling device 2-tage, ZSG, each 1 NO, right + left
3-stage, ZSE 2-2 (2 NO + 1 NC) only left
Without enabling device
Dial EUCHNER Logo
Customer-specific logo as per attachment
Silver 65 mm
Black 65 mm
Silver 75 mm
Black 75 mm
Selector switch left Positions Gray code
Without
Labeling:
Positions 1 of X
Selector switch right Positions Gray code
Without
Labeling:
Positions 1 of X
Handwheelsee cataloguepage 60 - 72
without
Magnetic
Mechanical
A05, 100 pulses, RS422
G05, 100 pulses
G12, 25 pulses
G24, 100 pulses
On which control system will the handwheelbe operated?
Siemens, type:
Fanuc, type:
Mitsubishi, type:
Other / brand:Further components and versions on request
Item Orderno. Page Item Orderno. Page
81
Item Index
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Indexbyitemdesignation
ActiveX module 067176 27ActiveX module 093011 19Blind plug for EMERGENCY STOP device mounting hole 083653 54
Blind plug for EMERGENCY STOP device mounting hole 059622 56
Bottom shell HBA-105503 105503 35Bottom shell HBA-105504 105504 35Bottom shell HBA-105506 105506 35Bottom shell HBA-105507 105507 35Bottom shell HBA-105508 105508 35Bottom shell HBA-105510 105510 35Bottom shell HBA-114213 114213 35Bottom shell HBA-114215 114215 35Bottom shell HBM-112949 112949 39Bottom shell HBM-112954 112954 39Bottom shell HBM-112955 112955 39Bottom shell HBM-112958 112958 39Cable gland M16x1.5 083641 53Cable gland Pg 11 073982 53Cable gland Pg 13.5 073983 53Cable, 12-core, coiled, 3,900 mm 086721 52Cable, 12-core, coiled, 5,400 mm 086722 52Cable, 12-core, straight, 10,000 mm 087381 52Cable, 12-core, straight, 3,500 mm 087379 52Cable, 12-core, straight, 5,000 mm 087380 52Cable, 23-core, coiled, 3,900 mm 087408 52Cable, 23-core, coiled, 5,400 mm 087409 52Cable, 23-core, straight, 10,000 mm 087384 52Cable, 23-core, straight, 3,500 mm 087382 52Cable, 23-core, straight, 5,000 mm 087383 52Cable, 35-core, coiled, 3,900 mm 097190 52Cable, 35-core, coiled, 5,400 mm 097191 52Cable, 35-core, straight, 10,000 mm 097187 52Cable, 35-core, straight, 3,500 mm 097189 52Cable, 35-core, straight, 5,000 mm 097188 52Dial 58 mm black 059276 73Dial 58 mm silver 100914 72Dial 65 mm black, for HBL kit 057318 73Dial 65 mm silver, for HBL kit 057314 73Dial 66.5 mm black 105961 72Dial 66.5 mm silver 111992 72Dial 75 mm black 072633 73Dial 75 mm silver 072597 73Dial 78 mm black 057280 73Dial 78 mm silver 057272 73Dial 90 mm black 057266 73Dial 90 mm silver 057268 73EMERGENCY STOP device (pull to reset) 073985 56EMERGENCY STOP device (pull to reset) 096298 54EMERGENCY STOP device (turn to reset) 106435 54Enabling switch ZSE2-2 C 1692 070752 57Enabling switch ZSE2-4 C 1943 083477 57Enabling switch ZXE-091336 091336 55Enabling switch ZXE-104833 104833 55Flange connector and short-circuit plug 103042 45Flange connector, 12-pin 086749 51Flange connector, 23-pin 074384 51Flange connector, 28-pin 074385 51Flange connector, 35-pin 074386 51Flat seal for HBL front panel 072641 44Front panel F with seal 028760 72Front panel for handwheel HKB, anodized black 105073 72
Front panel for handwheel HKB, anodized silver 105072 72Front panel for housing HBA with handwheel 083635 36Front panel for housing HBA with handwheel 083636 36Front panel for housing HBA without handwheel 084395 36Front panel for housing HBA without handwheel 084396 36Front panel for top shell HBM with handwheel 113061 40Front panel for top shell HBM with handwheel 113440 40Front panel for top shell HBM without handwheel 113060 40Front panel for top shell HBM without handwheel 113438 40Front panel G with seal 028761 72Front panel G with seal 041758 72Hand-held pendant station HBA-072936 072936 11Hand-held pendant station HBA-079826 079826 11Hand-held pendant station HBA-079827 079827 11Hand-held pendant station HBA-079828 079828 11Hand-held pendant station HBA-096692 096692 17Hand-held pendant station HBA-100186 100186 13Hand-held pendant station HBA-100194 100194 13Hand-held pendant station HBA-100212 100212 13Hand-held pendant station HBA-100213 100213 13Hand-held pendant station HBA-102434 102434 15Hand-held pendant station HBA-103037 103037 15Hand-held pendant station HBA-105693 105693 17Hand-held pendant station HBAS-072949 072949 19Hand-held pendant station HBAS-094594 094594 19Hand-held pendant station HBAS-99105 099105 19Hand-held pendant station HBL-097339 097339 25Hand-held pendant station HBLS-072725 072725 27Hand-held pendant station HBM-111711 111711 21Hand-held pendant station HBM-112392 112392 23Handwheel HKB025S7G12 105137 62Handwheel HKB100S7A05 105134 62Handwheel HKB100S7A05K 109429 62Handwheel HKB100S7A12 105135 62Handwheel HKB100S7G05 105136 62Handwheel HKB100S7G24 105138 62Handwheel HKC025S100G12 072940 64Handwheel HKC100S100A05 087733 64Handwheel HKC100S100G05 082573 64Handwheel HKC100S100G24 087739 64Handwheel HKD025S100G12 091525 66Handwheel HKD025V100G12 091526 66Handwheel HKD100S100A05 054866 66Handwheel HKD100S100G05 083354 66Handwheel HKD100S100G24 054868 66Handwheel HKD100V100A05 057036 66Handwheel HKD100V100G05 091527 66Handwheel HKD100V100G24 057037 66Handwheel HWA025T100G12/V10 072972 68Handwheel HWA100T100A05/V10 072970 68Handwheel HWA100T100G05/V10 072971 68Handwheel HWB025T100G12/V05 072975 70Handwheel HWB100T100G05/V05 072974 70Handwheel HWB10T100A05/V05 072973 70HBL front panel, with hole for handwheel HKD and seal 073139 44
HBL front panel, with seal 073138 44Holder HBA black 100221 58Holder HBA black, enlarged handwheel cut-out 109979 58Holder HBA gray 072828 58Holder HBA gray, enlarged handwheel cut-out 072935 58Holder HBL 084397 58Holder HBM 112335 58
Item Orderno. Page Item Orderno. Page
82
Item Index
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Housing HBA-083449 083449 33Housing HBA-083495 083495 33Housing HBA-083499 083499 33Housing HBA-084445 084445 31Housing HBA-084450 084450 31Housing HBA-086155 086155 31Housing HBA-086762 086762 33Housing HBA-095561 095561 33Housing HBA-095562 095562 31Housing HBA-095572 095572 33Housing HBA-095573 095573 33Housing HBA-095574 095574 33Housing HBL-072630 072630 43Housing HBL-072631 072631 43Housing HBL-072632 072632 43Housing HBL-072983 072983 43Housing HBL-073098 073098 43Housing HBL-073109 073109 43Housing HBL-073113 073113 43Housing HBL-083484 083484 43Illuminated pushbutton, white LED 098045 48Illuminated pushbutton, yellow LED 074991 50Key-operated rotary switch 083639 50Male flange connector, 19-pin 092374 45Manual for ActiveX module 067178 27Manual for ActiveX module 093013 19Plug connector, 12-pin 086748 51Plug connector, 23-pin 074393 51Plug connector, 28-pin 074394 51Plug connector, 35-pin 074395 51Pushbutton, black button 083640 48Pushbutton, blue button 086757 48Pushbutton, green button 086754 48Pushbutton, red button 086753 48Pushbutton, white button 086755 48Pushbutton, yellow button 086756 48Replacement key 092386 50Rotary knob 097141 50Sealing ring E 054861 72Selector switch, 12 detent positions 097033 49Selector switch, 16 detent positions 097034 49Selector switch, 2 detent positions 097026 49Selector switch, 3 detent positions 097027 49Selector switch, 4 detent positions 097028 49Selector switch, 5 detent positions 097029 49Selector switch, 6 detent positions 097030 49Selector switch, 7 detent positions 097031 49Selector switch, 8 detent positions 097032 49Short circuit plug with chain, 12-pin 087802 51Short circuit plug with chain, 23-pin 083457 51Short circuit plug with chain, 28-pin 083458 51Short circuit plug with chain, 35-pin 083459 51Top shell HBA-105640 105640 34Top shell HBA-105641 105641 34Top shell HBA-105642 105642 34Top shell HBA-105643 105643 34Top shell HBM-112986 112986 38Top shell HBM-112991 112991 38
Orderno. Item Page Orderno. Item Page
83
Item Index
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
Indexbyordernumber
028760 Front panel F with seal 72028761 Front panel G with seal 72041758 Front panel M with seal 72054861 Sealing ring E 72054866 Handwheel HKD100S100A05 66054868 Handwheel HKD100S100G24 66057036 Handwheel HKD100V100A05 66057037 Handwheel HKD100V100G24 66057266 Dial 90 mm black 73057268 Dial 90 mm silver 73057272 Dial 78 mm silver 73057280 Dial 78 mm black 73057314 Dial 65 mm silver, for HBL kit 73057318 Dial 65 mm black, for HBL kit 73059276 Dial 58 mm black 73059622 Blind plug for EMERGENCY STOP device mounting hole 56
067176 ActiveX module 27067178 ActiveX module manual 27070752 Enabling switch ZSE2-2 C 1692 57072597 Dial 75 mm silver 73072630 Housing HBL-072630 43072631 Housing HBL-072631 43072632 Housing HBL-072632 43072633 Dial 75 mm black 73072641 Flat seal for HBL front panel 44072725 Hand-held pendant station HBLS-072725 27072828 Holder HBA gray 58072935 Holder HBA gray, enlarged handwheel cut-out 58072936 Hand-held pendant station HBA-072936 11072940 Handwheel HKC025S100G12 64072949 Hand-held pendant station HBAS-072949 19072970 Handwheel HWA100T100A05/V10 68072971 Handwheel HWA100T100G05/V10 68072972 Handwheel HWA025T100G12/V10 68072973 Handwheel HWB10T100A05/V05 70072974 Handwheel HWB100T100G05/V05 70072975 Handwheel HWB025T100G12/V05 70072983 Housing HBL-072983 43073098 Housing HBL-073098 43073109 Housing HBL-073109 43073113 Housing HBL-073113 43073138 HBL front panel, with seal 44073139 HBL front panel, with hole for handwheel HKD and seal 44
073982 Cable gland Pg 11 53073983 Cable gland Pg 13.5 53073985 EMERGENCY STOP device (pull-to-reset) 56074384 Flange connector, 23-pin 51074385 Flange connector, 28-pin 51074386 Flange connector, 35-pin 51074393 Plug connector, 23-pin 51074394 Plug connector, 28-pin 51074395 Plug connector, 35-pin 51074991 Illuminated pushbutton, yellow LED 50079826 Hand-held pendant station HBA-079826 11079827 Hand-held pendant station HBA-079827 11079828 Hand-held pendant station HBA-079828 11082573 Handwheel HKC100S100G05 64083354 Handwheel HKD100S100G05 66083449 Housing HBA-083449 33083457 Short-circuit plug with chain, 23-pin 51083458 Short-circuit plug with chain, 28-pin 51
083459 Short-circuit plug with chain, 35-pin 51083477 Enabling switch ZSE2-4 C 1943 57083484 Housing HBL-083484 43083495 Housing HBA-083495 33083499 Housing HBA-083499 33083635 Front panel for housing HBA with handwheel 36083636 Front panel for housing HBA with handwheel 36083639 Key-operated rotary switch 50083640 Pushbutton, black button 48083641 Cable gland M16x1.5 53083653 Blind plug for EMERGENCY STOP device mounting hole 54
084395 Front panel for housing HBA without handwheel 36084396 Front panel for housing HBA without handwheel 36084397 Holder HBL 58084445 Housing HBA-084445 31084450 Housing HBA-084450 31086155 Housing HBA-086155 31086721 Cable, 12-core, coiled, 3,900 mm 52086722 Cable, 12-core, coiled, 5,400 mm 52086748 Plug connector, 12-pin 51086749 Flange connector, 12-pin 51086753 Pushbutton, red button 48086754 Pushbutton, green button 48086755 Pushbutton, white button 48086756 Pushbutton, yellow button 48086757 Pushbutton, blue button 48086762 Housing HBA-086762 33087379 Cable, 12-core, straight, 3,500 mm 52087380 Cable, 12-core, straight, 5,000 mm 52087381 Cable, 12-core, straight, 10,000 mm 52087382 Cable, 23-core, straight, 3,500 mm 52087383 Cable, 23-core, straight, 5,000 mm 52087384 Cable, 23-core, straight, 10,000 mm 52087408 Cable, 23-core, coiled, 3,900 mm 52087409 Cable, 23-core, coiled, 5,400 mm 52087733 Handwheel HKC100S100A05 64087739 Handwheel HKC100S100G24 64087802 Short-circuit plug with chain, 12-pin 51091336 Enabling switch ZXE-091336 55091525 Handwheel HKD025S100G12 66091526 Handwheel HKD025V100G12 66091527 Handwheel HKD100V100G05 66092374 Male flange connector, 19-pin 45092386 Replacement key 50093011 ActiveX module 19093013 ActiveX module manual 19094594 Hand-held pendant station HBAS-094594 19095561 Housing HBA-095561 33095562 Housing HBA-095562 31095572 Housing HBA-095572 33095573 Housing HBA-095573 33095574 Housing HBA-095574 33096298 EMERGENCY STOP device (pull-to-reset) 54096692 Hand-held pendant station HBA-096692 17097026 Selector switch, 2 detent positions 49097027 Selector switch, 3 detent positions 49097028 Selector switch, 4 detent positions 49097029 Selector switch, 5 detent positions 49097030 Selector switch, 6 detent positions 49097031 Selector switch, 7 detent positions 49097032 Selector switch, 8 detent positions 49097033 Selector switch, 12 detent positions 49
Orderno. Item Page Orderno. Item Page
84
Item Index
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
097034 Selector switch, 16 detent positions 49097141 Rotary knob 50097187 Cable, 35-core, straight, 10,000 mm 52097188 Cable, 35-core, straight, 5,000 mm 52097189 Cable, 35-core, straight, 3,500 mm 52097190 Cable, 35-core, coiled, 3,900 mm 52097191 Cable, 35-core, coiled, 5,400 mm 52097339 Hand-held pendant station HBL-097339 25098045 Illuminated pushbutton, white LED 48099105 Hand-held pendant station HBAS-99105 19100186 Hand-held pendant station HBA-100186 13100194 Hand-held pendant station HBA-100194 13100212 Hand-held pendant station HBA-100212 13100213 Hand-held pendant station HBA-100213 13100221 Holder HBA black 58100914 Dial 58 mm silver 72102434 Hand-held pendant station HBA-102434 15103037 Hand-held pendant station HBA-103037 15103042 Flange connector and short-circuit plug 45104833 Enabling switch ZXE-104833 55105072 Front panel for handwheel HKB, anodized silver 72105073 Front panel for handwheel HKB, anodized black 72105134 Handwheel HKB100S7A05 62105135 Handwheel HKB100S7A12 62105136 Handwheel HKB100S7G05 62105137 Handwheel HKB025S7G12 62105138 Handwheel HKB100S7G24 62105503 Bottom shell HBA-105503 35105504 Bottom shell HBA-105504 35105506 Bottom shell HBA-105506 35105507 Bottom shell HBA-105507 35105508 Bottom shell HBA-105508 35105510 Bottom shell HBA-105510 35105640 Top shell HBA-105640 34105641 Top shell HBA-105641 34105642 Top shell HBA-105642 34105643 Top shell HBA-105643 34105693 Hand-held pendant station HBA-105693 17105961 Dial 66.5 mm black 72106435 EMERGENCY STOP device (turn-to-release) 54109429 Handwheel HKB100S7A05K 62109979 Holder HBA black, enlarged handwheel cut-out 58111711 Hand-held pendant station HBM-111711 21111992 Dial 66.5 mm silver 72112335 Holder HBM 58112392 Hand-held pendant station HBM-112392 23112949 Bottom shell HBM-112949 39112954 Bottom shell HBM-112954 39112955 Bottom shell HBM-112955 39112958 Bottom shell HBM-112958 39112986 Top shell HBM-112986 38112991 Top shell HBM-112991 38113060 Front panel for top shell HBM without handwheel 40113061 Front panel for top shell HBM with handwheel 40113438 Front panel for top shell HBM without handwheel 40113440 Front panel for top shell HBM with handwheel 40114213 Bottom shell HBA-114213 35114215 Bottom shell HBA-114215 35
85
For Your Notes
Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.
86
07/1
3
Representatives
Germany
International
ChemnitzEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroAm Vogelherd 209627 Bobritzsch-HilbersdorfTel. +49 37325 906000Fax +49 37325 [email protected]
DüsseldorfEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroSundernholz 2445134 EssenTel. +49 201 43083-93Fax +49 201 [email protected]
AustraliaMicromax Sensors & AutomationUnit 2, 106-110 Beaconsfield StreetSilverwater, NSW 2128Tel. +61 2 87482800Fax +61 2 [email protected]
AustriaEUCHNER GmbHSüddruckgasse 42512 TribuswinkelTel. +43 2252 42191Fax +43 2252 [email protected]
BeneluxEUCHNER (BENELUX) BVVisschersbuurt 233356 AE PapendrechtTel. +31 78 615-4766Fax +31 78 [email protected]
BrazilEUCHNER LtdaAv. Prof. Luiz Ignácio Anhaia Mello, no. 4387S. LucasSão Paulo - SP - BrasilCEP 03295-000Tel. +55 11 29182200Fax +55 11 [email protected]
CanadaIAC & Associates Inc.2180 Fasan DriveUnit AOldcastle, OntarioN0R 1L0Tel. +1 519 737-0311Fax +1 519 [email protected]
ChinaEUCHNER (Shanghai) Trading Co., Ltd.No. 8 Workshop A, Hi-Tech Zone503 Meinengda Road Songjiang201613 ShanghaiTel. +86 21 5774-7090Fax +86 21 [email protected]
Czech RepublicEUCHNER electric s.r.o.Videnská 134/10261900 BrnoTel. +420 533 443-150Fax +420 533 [email protected]
Essen/DortmundThomas Kreißlfördern - steuern - regelnHackenberghang 8a45133 Essen Tel. +49 201 84266-0Fax +49 201 [email protected]
WiesbadenEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroSchiersteiner Straße 2865187 WiesbadenTel. +49 611 98817644Fax +49 611 [email protected]
FreiburgEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroSteige 579206 BreisachTel. +49 7664 4038-33Fax +49 7664 [email protected]
HamburgEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroBleickenallee 1322763 HamburgTel. +49 40 636740-57Fax +49 40 [email protected]
MagdeburgEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroTismartraße 1039108 MagdeburgTel. +49 391 736279-22Fax +49 391 [email protected]
MünchenEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroObere Bahnhofstraße 682110 GermeringTel. +49 89 800846-85Fax +49 89 [email protected]
NürnbergEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroSteiner Straße 22a90522 OberasbachTel. +49 911 669-3829Fax +49 911 [email protected]
StuttgartEUCHNER GmbH + Co. KGIngenieur- und VertriebsbüroKohlhammerstraße 1670771 Leinfelden-EchterdingenTel. +49 711 7597-0Fax +49 711 [email protected]@euchner.de
DenmarkDuelco A/SSystemvej 89200 Aalborg SVTel. +45 7010 1007Fax +45 7010 [email protected]
FinlandSähkölehto OyHolkkitie 1400880 HelsinkiTel. +358 9 7746420Fax +358 9 [email protected]
FranceEUCHNER France S.A.R.L.Parc d‘Affaires des BellevuesAllée Rosa LuxembourgBâtiment le Colorado95610 ERAGNY sur OISETel. +33 1 3909-9090Fax +33 1 [email protected]
Hong KongImperial Engineers & Equipment Co. Ltd.Unit B 12/F Cheung Lee Industrial Building9 Cheung Lee Street Chai WanHong KongTel. +852 2889 0292Fax +852 2889 [email protected]
HungaryEUCHNER Ges.mbHMagyarországi Fióktelep2045 TörökbálintFSD Park 2.Tel. +36 2342 8374Fax +36 2342 [email protected]
IndiaEUCHNER (India) Pvt. Ltd.401, Bremen Business Center,City Survey No. 2562, University RoadAundh, Pune - 411007Tel. +91 20 64016384Fax +91 20 [email protected]
IsraelIlan & Gavish Automation Service Ltd.26 Shenkar St. Qiryat Arie 49513P.O. Box 10118Petach Tikva 49001Tel. +972 3 9221824Fax +972 3 [email protected]
ItalyTRITECNICA S.r.l.Viale Lazio 2620135 MilanoTel. +39 02 541941Fax +39 02 [email protected]
JapanEUCHNER Representative Office Japan8-20-24 KamitsurumahonchoMinami-ku, Sagamihara-shiKanagawa 252-0318Tel. +81 42 8127767Fax +81 42 [email protected]
Solton Co. Ltd.2-13-7, Shin-YokohamaKohoku-ku, YokohamaJapan 222-0033Tel. +81 45 471-7711Fax +81 45 [email protected]
KoreaEUCHNER Korea Co., Ltd.RM 810 Daerung Technotown 3rd#448 Gasang-DongGumcheon-gu, SeoulTel. +82 2 2107-3500Fax +82 2 [email protected]
MexicoSEPIA S.A. de C.V.Maricopa # 10302, Col. Napoles.Del. Benito Juarez03810 Mexico D.F.Tel. +52 55 55367787Fax +52 55 [email protected]
PolandELTRONPl. Wolnosci 7B50-071 WrocławTel. +48 71 3439755Fax +48 71 [email protected]
Republic of South AfricaRUBICON ELECTRICAL DISTRIBUTORS4 Reith Street, Sidwell6061 Port ElizabethTel. +27 41 451-4359Fax +27 41 [email protected]
RomaniaFirst Electric SRLStr. Ritmului Nr. 1 Bis Ap. 2, Sector 2021675 BucurestiTel. +40 21 2526218Fax +40 21 [email protected]
RussiaVALEX electroUliza Karjer dom 2, Str. 9, Etash 2117449 MoskwaTel. +7 495 41196-35Fax +7 495 [email protected]
SingaporeSentronics Automation & Marketing Pte Ltd.Blk 3, Ang Mo Kio Industrial Park 2A#05-06Singapore 568050Tel. +65 6744 8018Fax +65 6744 [email protected]
SlovakiaEUCHNER electric s.r.o.Videnská 134/10261900 BrnoTel. +420 533 443-150Fax +420 533 [email protected]
SloveniaSMM proizvodni sistemi d.o.o.Jaskova 182000 MariborTel. +386 2 4502326Fax +386 2 [email protected]
SpainEUCHNER, S.L.Gurutzegi 12 - Local 1Polígono Belartza20018 San SebastianTel. +34 943 316-760Fax +34 943 [email protected]
SwedenCensit ABBox 33133123 VärnamoTel. +46 370 691010Fax +46 370 [email protected]
SwitzerlandEUCHNER AGGrofstrasse 178887 MelsTel. +41 81 720-4590Fax +41 81 [email protected]
TaiwanDaybreak Int‘l (Taiwan) Corp.3F, No. 124, Chung-Cheng RoadShihlin 11145, TaipeiTel. +886 2 8866-1234Fax +886 2 [email protected]
TurkeyEUCHNER Endüstriyel Emniyet Teknolojileri Ltd. Şti.Hattat Bahattin Sok.Ceylan Apt. No. 13/AGöztepe Mah.34730 Kadıköy / IstanbulTel. +90 216 359-5656Fax +90 216 [email protected]
United KingdomEUCHNER (UK) Ltd.Unit 2 Petre Drive,SheffieldSouth YorkshireS4 7PZTel. +44 114 2560123Fax +44 114 [email protected]
USAEUCHNER USA Inc.6723 Lyons StreetEast Syracuse, NY 13057Tel. +1 315 701-0315Fax +1 315 [email protected]
EUCHNER USA Inc.Detroit Office130 Hampton CircleRochester Hills, MI 48307Tel. +1 248 537-1092Fax +1 248 [email protected]
www.euchner.com
Support hotline You have technical questions about our products or how they can be used?For further questions please contact your local sales representative.
Comprehensive download area You are looking for more information about our products?You can simply and quickly download operating instructions, CAD or ePLAN data and accompanying software for our products at www.euchner.com.
Customer-specifi c solutionsYou need a specifi c solution or have a special requirement?Please contact us. We can manufacture your custom product even in small quantities.
EUCHNER near youYou are looking for a contact at your location? Along with the headquarters in Leinfel-den-Echterdingen, the worldwide sales network includes 15 subsidiaries and numerous representatives in Germany and abroad – you will defi nitely also fi nd us near you.
U2_U3_EN_2013.indd 2 13.03.13 17:32Adressen neu DE EN FR IT ES.indd 86 28.06.2013 10:41:31
87
www.euchner.com
Support hotline You have technical questions about our products or how they can be used?For further questions please contact your local sales representative.
Comprehensive download area You are looking for more information about our products?You can simply and quickly download operating instructions, CAD or ePLAN data and accompanying software for our products at www.euchner.com.
Customer-specifi c solutionsYou need a specifi c solution or have a special requirement?Please contact us. We can manufacture your custom product even in small quantities.
EUCHNER near youYou are looking for a contact at your location? Along with the headquarters in Leinfel-den-Echterdingen, the worldwide sales network includes 15 subsidiaries and numerous representatives in Germany and abroad – you will defi nitely also fi nd us near you.
U2_U3_EN_2013.indd 2 13.03.13 17:32Adressen neu DE EN FR IT ES.indd 87 28.06.2013 10:41:32
EUCHNER GmbH + Co. KGKohlhammerstraße 1670771 Leinfelden-EchterdingenGermanyTel. +49 711 7597-0Fax +49 711 [email protected]
EN
0994
43-0
7-05
/13
Subj
ect t
o te
chni
cal m
odifi
catio
ns w
ithou
t not
ice,
no
liabi
lity
will
be a
ssum
ed fo
r any
det
ail.
© E
UCH
NER
Gm
bH +
Co.
KG
· TA
HBHR.indd 1 20.06.13 15:31