Avoiding accidents by reporting unsafe situations in time !!

Avoiding accidents by reporting unsafe situations in time !!

Ineos Polyolefins want you do your work safely !

Therefore we want to prevent accidents

We can do this by reporting unsafe situations in time.

In this presentation you will see a few examples of what can go wrong.

Most of these accidents could have been prevented

You can help with this !!!!

Twist locks not tightened: Stay out of the danger zone !

Construction fault chassis: stay out of the danger zone!!!

Suspension legs rusted : stay out of the danger zone !

Cooking in the cabin when waiting on site !

Technical defect loading ramp

Hose detached: coupling was not secured

Canvas loose on trailer, loading with high wind speed !

Octabins not secured

Pallets not secured !!

Ring of fluidization cone detaches during inspectionand injures an operator

Dead angle !!

Pallet drops: not all products can be double stacked !!!!

Working at height without protection !!

Original connection was here: Driver had to climb on pile of pallets to connect

Unsafe access to the unloading place, not enough room

????????

Door was closed by using the pins of a forklift while the operator was standing between container and forklift

Unloading from the public road

Heavy traffic….School children are passing by…What would happen in case of a collisionduring tipping ??????

Overfilling of a silo

Hose connected onto wrong silo….Who takes action when the high level alarm is raised ?

Oeps, forgotten to close the bottom manlid !!!

Mechanical coupling of 5th wheel not secured Loaded trailer detaches during driving: suspension legs bended

Overheated axle causes a wheel fire and causes the melting of the aluminium

Or puts the load on fire…..

Do you see something unsafe ?Let us know !!!!