View
3
Download
0
Category
Preview:
Citation preview
Anchor Twist Pins with TRMs
www.gripple.com
Western Excelsior Corp.4609 E. Boonville-New Harmony Rd. Evansville, IN 47725
FEATURES / BENEFITS
• Quick and easy to install with an electric drill and custom chuck
• Superior performance when compared to traditional straight pins (Up to 200Lbs of pull out resistance)
• Provides intimate contact between the TRM and the Soil.
• Eliminates time & labor associated with replacing or reworking pins that have
become loose or pulled out altogether
• The patent pending innovative design of the installation chuck allows the
Twist Anchor to be installed to full depth without damaging the mat
• Integrated top coil form eliminates the need for a washer, spreads the load
and helps secure the matting in place
The Gripple Twist Pins from Western Green are a very versatile product that provides superior holding capacity over traditional sod staples and washer pins. They are ideal for most TRM applications.
INSTALLATION TOOLS
Chuck (3.5 in)
Extended Chuck (1ft 73⁄8 in)
For more information contact us or visit our website - www.gripple.com
CHUCK ASSEMBLY
INSTALLATION
1. 2.
3. 4.
For more information on how to install the TL-TA1 visit our Youtube channel - GrippleTV. Alternatively see Installation Guidelines & Procedures.
Anchor Twist Pins with TRMs
www.gripple.com
Western Excelsior Corp.4609 E. Boonville-New Harmony Rd. Evansville, IN 47725
P300
SC250
C350
P550
Twist Pins Selection
Western Excelsior North American Green
TRM's PP5-8oz P300 / P300-LW
TRM's PP5-10oz SC250
TRM's PP5-12oz C350
TRM's PP5-Heavy Duty P550
HPTRM's PP5-Pro TMAX 3k
HPTRM's PP5-Xtreme TMax
HPTRM's PP5-Ultimate W3000
Use the Gripple Twist Pins with any of these products provided by Western Green. The combination of top quality TRMs and the advanced holding power of Gripple Twist Pins will ensure that your site is protected from erosion at an economic cost with a quick installation without any headaches.
Installation Tips When installing Twist Pins ensure the helical is pushed below the TRM before drilling into ground to avoid
entanglement (especially TRMs with light weight nets).
Ensure no debris is on the Twist Pins before drilling as this debris may cause the strands from the TRM to tangle on the Twist Pin causing damage to the TRM.
When using Twist Pins with light weight nets ensure the pins that are placed along the edges of the TRM are placed away from the edge so as to avoid the netting pulling away from the Twist Pins.
TL-TA1 12Inch
TL-TA1 8inch
Ideal for loose Soil ie.
Sand or wet top soil.
TL-TA2 12Inch
TL-TA2 8inch
Ideal for Hard Soil ie.
Clay or Hard Pan.
Recommended