Anchor Twist Pins with TRMs

www.gripple.com

Western Excelsior Corp.4609 E. Boonville-New Harmony Rd. Evansville, IN 47725

FEATURES / BENEFITS

• Quick and easy to install with an electric drill and custom chuck

• Superior performance when compared to traditional straight pins (Up to 200Lbs of pull out resistance)

• Provides intimate contact between the TRM and the Soil.

• Eliminates time & labor associated with replacing or reworking pins that have

become loose or pulled out altogether

• The patent pending innovative design of the installation chuck allows the

Twist Anchor to be installed to full depth without damaging the mat

• Integrated top coil form eliminates the need for a washer, spreads the load

and helps secure the matting in place

The Gripple Twist Pins from Western Green are a very versatile product that provides superior holding capacity over traditional sod staples and washer pins. They are ideal for most TRM applications.

INSTALLATION TOOLS

Chuck (3.5 in)

Extended Chuck (1ft 73⁄8 in)

For more information contact us or visit our website - www.gripple.com

CHUCK ASSEMBLY

INSTALLATION

1. 2.

3. 4.

For more information on how to install the TL-TA1 visit our Youtube channel - GrippleTV. Alternatively see Installation Guidelines & Procedures.

Anchor Twist Pins with TRMs

www.gripple.com

Western Excelsior Corp.4609 E. Boonville-New Harmony Rd. Evansville, IN 47725

P300

SC250

C350

P550

Twist Pins Selection

Western Excelsior North American Green

TRM's PP5-8oz P300 / P300-LW

TRM's PP5-10oz SC250

TRM's PP5-12oz C350

TRM's PP5-Heavy Duty P550

HPTRM's PP5-Pro TMAX 3k

HPTRM's PP5-Xtreme TMax

HPTRM's PP5-Ultimate W3000

Use the Gripple Twist Pins with any of these products provided by Western Green. The combination of top quality TRMs and the advanced holding power of Gripple Twist Pins will ensure that your site is protected from erosion at an economic cost with a quick installation without any headaches.

Installation Tips When installing Twist Pins ensure the helical is pushed below the TRM before drilling into ground to avoid

entanglement (especially TRMs with light weight nets).

Ensure no debris is on the Twist Pins before drilling as this debris may cause the strands from the TRM to tangle on the Twist Pin causing damage to the TRM.

When using Twist Pins with light weight nets ensure the pins that are placed along the edges of the TRM are placed away from the edge so as to avoid the netting pulling away from the Twist Pins.

TL-TA1 12Inch

TL-TA1 8inch

Ideal for loose Soil ie.

Sand or wet top soil.

TL-TA2 12Inch

TL-TA2 8inch

Ideal for Hard Soil ie.

Clay or Hard Pan.