2018/2019 BOOT AND BINDING COMPATIBILITY...This chart is intended as a summary of boot compatibility...

This chart is intended as a summary of boot compatibility with current Atomic and Salomon bindings. Other factors, including product wear and damage, must be considered. Release value selection and adjustment and Boot-to-Binding adjustments such as forward pressure, toe width and toe height, must be made by a certified Atomic or Salomon technician. For more details consult the 2018/2019 Atomic and Salomon Shop Practices Manual.

Concerned Bindings:All Atomic and Salomon alpine bindings not included below

Alpine Bindings

Warden MNC, Warden MNC Demo, Shift MNC, Guardian MNC, and

Tracker MNC

Bindings Stamped With MNC Bindings

Concerned Bindings:MTN and

Backland Bindings

Atomic and Salomon Bindings With Pins

WTR Bindings

Grip Walk Bindings

Bindings Stamped With

Bindings Stamped With

STH2 WTR, Guardian WTR, and Tracker WTR

FT11 GW, FT12 GW, Easytrak with Z11 Walk, and

Flextrak with Z12 Walk

BOOT NORMS

BINDINGS

Alpine Boots WTR/WTR+ Boots Touring BootsGrip Walk Boots Non-Compliant

ISO 5355 certified

alpine boots

ISO 9523 compliant

WTR/WTR+ boots*

ISO 9523 compliant

touring boots

ISO 9523 compliant

Grip Walk boots

Touring boots not compliant with ISO 9523

CompatibleISO 9462 bindings are

intended for use with ISO 5355 boots

NotCompatible

NotCompatible

NotCompatible

NotCompatible

NotCompatible

NotCompatible

NotCompatible

NotCompatible

NotCompatible

NotCompatible

NotCompatible

CompatibleISO 9462 bindings are

intended for use with ISO 5355 boots

CompatibleISO 9462 bindings are

intended for use with ISO 5355 boots

CompatibleWTR marked bindings

are designed to work with WTR marked boots

CompatibleWTR marked bindings are de-signed to work with Grip Walk marked boots with adjustment

CompatibleGrip Walk marked bindings are designed to work with Grip Walk marked boots

CompatibleMNC marked bindings

are designed to work with WTR marked boots

Partially CompatibleBindings with pins require

boots with compatible inserts. Consult an authorized dealer.

Partially CompatibleBindings with pins require

boots with compatible inserts. Consult an authorized dealer.

Partially CompatibleBindings with pins require

boots with compatible inserts. Consult an authorized dealer.

Partially CompatibleBindings with pins require

boots with compatible inserts. Consult an authorized dealer.

CompatibleMNC marked bindings

are designed to work with ISO 9523 compliant boots

CompatibleMNC marked bindings

are designed to work with ISO 9523 compliant boots

CompatibleISO 9462 bindings are

intended for use with ISO 5355 boots

Warning: Any boot and binding combination, even if identified as compatible in this chart, must be installed, adjusted, tested, and regularly maintained by an authorized Atomic or Salomon dealer.

*WTR+ boots have Low Tech inserts

2018/2019 BOOT AND BINDING COMPATIBILITY