Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
This chart is intended as a summary of boot compatibility with current Atomic and Salomon bindings. Other factors, including product wear and damage, must be considered. Release value selection and adjustment and Boot-to-Binding adjustments such as forward pressure, toe width and toe height, must be made by a certified Atomic or Salomon technician. For more details consult the 2018/2019 Atomic and Salomon Shop Practices Manual.
Concerned Bindings:All Atomic and Salomon alpine bindings not included below
Alpine Bindings
Warden MNC, Warden MNC Demo, Shift MNC, Guardian MNC, and
Tracker MNC
Bindings Stamped With MNC Bindings
Concerned Bindings:MTN and
Backland Bindings
Atomic and Salomon Bindings With Pins
WTR Bindings
Grip Walk Bindings
Bindings Stamped With
Bindings Stamped With
STH2 WTR, Guardian WTR, and Tracker WTR
FT11 GW, FT12 GW, Easytrak with Z11 Walk, and
Flextrak with Z12 Walk
BOOT NORMS
BINDINGS
Alpine Boots WTR/WTR+ Boots Touring BootsGrip Walk Boots Non-Compliant
ISO 5355 certified
alpine boots
ISO 9523 compliant
WTR/WTR+ boots*
ISO 9523 compliant
touring boots
ISO 9523 compliant
Grip Walk boots
Touring boots not compliant with ISO 9523
CompatibleISO 9462 bindings are
intended for use with ISO 5355 boots
NotCompatible
NotCompatible
NotCompatible
NotCompatible
NotCompatible
NotCompatible
NotCompatible
NotCompatible
NotCompatible
NotCompatible
NotCompatible
CompatibleISO 9462 bindings are
intended for use with ISO 5355 boots
CompatibleISO 9462 bindings are
intended for use with ISO 5355 boots
CompatibleWTR marked bindings
are designed to work with WTR marked boots
CompatibleWTR marked bindings are de-signed to work with Grip Walk marked boots with adjustment
CompatibleGrip Walk marked bindings are designed to work with Grip Walk marked boots
CompatibleMNC marked bindings
are designed to work with WTR marked boots
Partially CompatibleBindings with pins require
boots with compatible inserts. Consult an authorized dealer.
Partially CompatibleBindings with pins require
boots with compatible inserts. Consult an authorized dealer.
Partially CompatibleBindings with pins require
boots with compatible inserts. Consult an authorized dealer.
Partially CompatibleBindings with pins require
boots with compatible inserts. Consult an authorized dealer.
CompatibleMNC marked bindings
are designed to work with ISO 9523 compliant boots
CompatibleMNC marked bindings
are designed to work with ISO 9523 compliant boots
CompatibleISO 9462 bindings are
intended for use with ISO 5355 boots
Warning: Any boot and binding combination, even if identified as compatible in this chart, must be installed, adjusted, tested, and regularly maintained by an authorized Atomic or Salomon dealer.
*WTR+ boots have Low Tech inserts
2018/2019 BOOT AND BINDING COMPATIBILITY