View
212
Download
0
Category
Preview:
Citation preview
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 1 of 7
NUS Wireless Network Configuration Guide for Mac OS X 10.6
1. From Mac OS menu, choose System Preferences.
2. Click Network.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 2 of 7
3. Choose AirPort and click Advanced…
4. Click the AirPort tab. Then click +
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 3 of 7
5. Enter NUS for Network Name. Choose WPA2 Enterprise for Security. Then click Save.
6. Click the 802.1X tab and click +. Then choose Add User Profile.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 4 of 7
7. Provide a name for your profile and enter the following settings:
Username : (Enter your “Domain\NUSNET Username”) (E.g. of Domain: NUSSTF/NUSSTU/NUSEXT)
Password : (Enter your NUSNET Password) Authentication : PEAP Wireless Network : NUS
Click Configure Trust…
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 5 of 7
8. From the Servers tab, click on “+” and enter the following 3 servers:
*.nw.nus.edu.sg
ase1.nus.edu.sg
ase2.nus.edu.sg
Click OK.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 6 of 7
9. Click OK.
10. Click Apply and click Turn AirPort On to switch on your wireless.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 7 of 7
11. Click Connect to connect your wireless profile with 802.1x authentication.
12. Under Status, “Airport is connected to NUS” will be shown and you are now connected to NUS wireless network.
Recommended