Click here to load reader
Upload
truongtram
View
212
Download
0
Embed Size (px)
Citation preview
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 1 of 7
NUS Wireless Network Configuration Guide for Mac OS X 10.6
1. From Mac OS menu, choose System Preferences.
2. Click Network.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 2 of 7
3. Choose AirPort and click Advanced…
4. Click the AirPort tab. Then click +
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 3 of 7
5. Enter NUS for Network Name. Choose WPA2 Enterprise for Security. Then click Save.
6. Click the 802.1X tab and click +. Then choose Add User Profile.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 4 of 7
7. Provide a name for your profile and enter the following settings:
Username : (Enter your “Domain\NUSNET Username”) (E.g. of Domain: NUSSTF/NUSSTU/NUSEXT)
Password : (Enter your NUSNET Password) Authentication : PEAP Wireless Network : NUS
Click Configure Trust…
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 5 of 7
8. From the Servers tab, click on “+” and enter the following 3 servers:
*.nw.nus.edu.sg
ase1.nus.edu.sg
ase2.nus.edu.sg
Click OK.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 6 of 7
9. Click OK.
10. Click Apply and click Turn AirPort On to switch on your wireless.
NUS Wireless Network Configuration Guide for Mac OS X 10.6 Page 7 of 7
11. Click Connect to connect your wireless profile with 802.1x authentication.
12. Under Status, “Airport is connected to NUS” will be shown and you are now connected to NUS wireless network.