1 Creating and Modifying an Order Set in CHCS December 17, 2012 Implementation and Training...

1

Creating and Modifying an Order Set in CHCS

December 17, 2012Implementation and Training Directorate

Delois Klemm, Director703-882-3918; delois.klemm@tma.osd.mil

Ronald Anderson, Deputy Director, Garrison Products703-882-3950; ronald.anderson@tma.osd.mil

Type “SET”;ENTER

1) Free-text the name of a New Order Set;ENTER

Type “Y”;ENTER

Creating an Order Set

Press ENTER to move your cursor through each modifiable option on the screen until you have File/Exit(ed).

2) Enter Order Type (i.e. Lab, Rad, RX, or Con);ENTER

1) ENTER

3) Type in the desired Lab, Rad, Rx, or Con;ENTER

Depending on what Order Type you entered, you will be taken through the ordering process for that Order Type. The following slides only demonstrate a lab order.

Schedule Type is defaulted for “Now”, but you can change this if desired;ENTER, ENTER, ENTER, ENTER if you are okay with the defaults.Type in a comment; ENTER

2) Enter Order Type (i.e. RX);ENTER

1) ENTER

3) Type in the desired medication;ENTER

4) Type in the number of the medication;ENTER

5) Type in the SIG;ENTER

Input a QTY;ENTER

Input Refills;ENTER

2) ENTER

1) ENTER

2) Enter Order Type (i.e. Rad);ENTER

1) ENTER

3) Type in the desired procedure;ENTER

4) Type in the number of the procedure;ENTER

You must type in a Clinical Impression;ENTER

ENTER through each field until you

ENTER

Option 1: Step 1-Quit and Save

“Q” to save and quit; ENTER

Option 1: Step 2, ENTER.

Option 2: Modifying an Order Set

Free-text the name of an Existing Order Set;ENTER

ENTER, ENTER, ENTER, ENTER.

Option 2: Step 2

Option 2: Step 3-Modify

Type “M” to modify, or “D” to delete specific orders; ENTER

Use the END key to select the order(s) you need to modify;ENTER

Option 2: Step 4-Select Item to Modify

Press ENTER to move your cursor through each modifiable option on the screen until you have File/Exit(ed).

Option 2: Step 5-Change Item

Option 2: Step 6-Save Changes

ENTER

Option 2: Step 7-ENTER

Option 2: Step 8-Quit and Save

“Q” to save and quit; ENTER