View
3.945
Download
3
Category
Tags:
Preview:
DESCRIPTION
The data monitoring system testo Saveris measures the temperature and humidity values of sensitive goods and products in the environment, in processes and during transport. The easy-to-use measurement system delivers safety and savings in time and costs thanks to automated measurement data recording. In stationary operation, the transfer of the measurement data takes place via wireless and/or Ethernet connection to a base station. This documents and monitors all measurement data. If limit values are exceeded, a whole range of different alarm options, such as SMS/e-mail alarm or alarm relay is available. Remote alarms can even be given when the system is not connected to a running PC.
Citation preview
0981
8114
/msp
/Si/A
/02.
2011
Sub
ject
toch
ange
with
outn
otic
e.
Everything under control:With testo SaverisTM, measurement data areunder control everywhere.
Committing to the future
2
The data monitoring system testo Saveris measures the temperature and humidity values ofsensitive goods and products in the environment, in processes and during transport. Theeasy-to-use measurement system delivers safety and savings in time and costs thanks toautomated measurement data recording. In stationary operation, the transfer of themeasurement data takes place via wireless and/or Ethernet connection to a base station. Thisdocuments and monitors all measurement data. If limit values are exceeded, a whole range ofdifferent alarm options, such as SMS/e-mail alarm or alarm relay is available. Remote alarmscan even be given when the system is not connected to a running PC.
Unlimited data monitoring.Whether stationary or mobile.
3
If measurement parameters are documented during transport, the driver receives all necessary information and alarmsfrom a Cockpit Unit in the driver’s cabin. Documentation and monitoring takes place via wireless probes, the time-consuming installation of wired sensors in the truck is unnecessary. At the same time, the possibility of printing outmeasurement values at the handover of goods, using an infrared printer, also exists.
All data recorded, whether stationary or on the road, are centrally stored in a software. At the same time, Saverisallows the comprehensive analysis and evaluation of all recorded measurement data.
With testo Saveris, all measurement data are under control, whether stationary or on the road.
4
Overview of application areas
Monitoring of processes in the pharmaceutical industry
In the pharmaceutical industry, high demands are placed on therecording and monitoring of quality parameters. Constantdocumentation during the production, storage and transportation oftemperature-sensitive products such as medicines, blood products orcell cultures has long been considered an absolute “must”.
testo Saveris automates the central documentation of measurementdata as well as the safe monitoring of refrigerated and deep-freezerooms, incubators and climate cabinets. At the same time, the systemallows the uninterrupted recording of measurement data, even duringthe transport of temperature or humidity-critical products such asmedicaments or vaccines. This means testo Saveris offers the optimumcontrol of production and storage, via transport, up to delivery.
The comprehensive alarm management allows fast alarming if limitvalues are violated. Thanks to a combination of wireless and/orEthernet probes, the system is optimum for many different applicationsin the pharmaceutical industry. It goes without saying that the datamonitoring system testo Saveris meets the requirements of 21 CFRPart 11.
5
Monitoring of processes in research and development, laboratories and hospitals
Research and development areas as well as laboratories and hospitals are responsible for the recording ofambient and process data in order to monitor sensitive products or machines. However, the monitoring oftemperature and humidity-critical goods during transport is also crucial for a high standard of quality. testoSaveris carries out the central documentation of the measurement series, for stationary as well as fortransport applications.
testo Saveris thus guarantees the simple and secure monitoring of climate and process data in airconditioning chambers, refrigerators, drying chambers, test benches or blood banks. If critical values areto be monitored during transport, testo Saveris offers the optimum solution.
Monitoring of the building climate
When monitoring the building climate, stable ambient conditions areespecially necessary in museums and archives in order to protectsensitive and expensive objects. During transportation, valuablegoods must be constantly monitored.testo Saveris automates the central recording of all climate data,stationary as well as during transport.By issuing alarms when limit values are exceeded, testo Saverisprotects valuable inventory from undesired temperature or humidityinfluences at all times. The radio probe can be flexibly attached tolocations without the effort of routing cables.
6
Monitoring the foodstuff cooling chain
Compliance with predefined temperature values is a decisive factorfor quality in food production and is important for complying with legalhygiene standards. However, the decisive factor is the uninterruptedmonitoring of the cold chain during production, storage, and aboveall, during transport. Only this uninterrupted monitoring provides afinal guarantee that the quality and freshness of the products can becertified. testo Saveris automates not only the monitoring of theambient and production temperatures during production and storage,but also of defined temperature limit values during transport. Theinstallation of wireless probes in delivery vehicles makes thecomplicated wiring of the driver’s cabin unnecessary. Alarms areissued whenever the limit values are exceeded.
The measurement data from stationary and transport applications aresaved centrally in a database and are accessible at any time. Allmeasurement values are under control! testo Saveris conforms to theEN 12830 standard.
Overview of application areas
7
Monitoring in production, transport and storage inindustry
In industry, a number of quality data must be recorded andmonitored in the production, storage and transport of products.testo Saveris automates the documentation of these data andalarms when limit values are exceeded. Products and processesare thus guaranteed at a high level of quality.
testo Saveris is ideal for use in the monitoring and documentationof ambient and temperature data in production areas, storerooms,refrigerators and climate cabinets. At the same time, testo Saverisallows the uninterrupted recording of measurement parametersduring the transport of sensitive products. The most variedapplications, stationary as well as in transport, are optimallycovered by testo Saveris radio probes and/or Ethernet probes.
8
testo SaverisTMconverter V 2.0testo SaverisTM
router V 2.0
testo SaverisTM
wireless probe
testo Saveris Ethernet probetesto Saveris radio probe
testo SaverisTM
analog coupler(wireless)
Ethernet
testo SaverisTM
analog coupler(Ethernet)
Humidity trans-mitters
testo Saveris™ system overviewData monitoring for uninterrupted checks
testo SaverisTM wireless probe
Probe versions with internal and exter-nal temperature and humidity sensorsallow the adaptation to every applica-tion. The radio probes are availablewith or without a display as an option.Current measurement data, the bat-tery status and the quality of the radiolink are shown on the display.
testo SaverisTM converter
Through the connection of a converterto an Ethernet jack, the signal of a radioprobe can be converted into an Ether-net signal. This combines the flexibleconnection of the radio probe with theuse of the existing Ethernet even overlong transmission paths.
Humidity transmitters testo 6651/6681/6351/6381
The two versions of the analog coupler (wireless / Ethernet) allow theinclusion of other measurement parameters into the testo Saveris mo-nitoring system, by integrating all measurement transmitters withstandarized current/voltage interfaces, e. g. 4 to 20 mA or 0 to 10 V.
testo SaverisTM router
The radio link can be improved orlengthened in poor structural conditi-ons by using a router. Several routerscan of course be used in the testo Sa-veris system. At the same time, theserial switching of up to 3 routersV 2.0 offers highest flexibility in the wi-reless range.
testo SaverisTM analog coupler
The two versions of the analog coupler (wireless / Ethernet) allow theinclusion of other measurement parameters into the testo Saveris mo-nitoring system, by integrating all measurement transmitters withstandarized current/voltage interfaces, e. g. 4 to 20 mA or 0 to 10 V.
9
USB or Ethernet
testo Saver-isTMBase
Ethernet
testo SaverisTM
Ethernet probe
testo SaverisTM
Software
testo SaverisTM
Control unit
Ethernet
Control unit
testo SaverisTM Base
The base is the heart of testo Saverisand can save 40,000 readings permeasurement channel independentlyof the PC. This corresponds to aroundone year of memory capacity at ameasuring rate of 15 minutes. Thesystem data and alarms are visible viathe display of the Saveris base.
testo SaverisTM extender
By connecting a Saveris Extender, thewireless signal of a transport probe isconverted into an Ethernet signal. Thedata transfer from wireless probe toExtender takes place automaticallywhen sufficient wireless connection ispresent.
testo SaverisTM Cockpit Unit
The Saveris Cockpit Unit displays allmeasurement values to the driver un-interruptedly during transport. If limitvalues are violated, the driver is imme-diately warned. Alternatively, the com-plete data recording can be printedout at the handover site of the goodsusing the Testo printer on the CockpitUnit.
testo SaverisTM Ethernet probe
In addition to the radio probes, probescan be used that are directly con-nected to the Ethernet. The existingLAN infrastructure can be usedthrough this. This allows the datatransfer from the probe to the base,even over long distances.
testo SaverisTM software
The testo Saveris software offers simple operation and anintuitive user interface. The Saveris software is available inthree different versions: as the basic version SBE (SmallBusiness Edition), the PROF (Professional) software versionwith diverse additional options, or as the CFR version. TheCFR software fulfils the requirements of the FDA’s 21 CFRPart 11 and is thus validatable.
10
1
2
3
· Connect Saveris base to mains. The probes can now belogged on at the base: They are switched on in series andautomatically identified by the base.
· The Saveris base is connected to the PC via USB or Ethernet.The software is installed on the PC with help from theinstallation wizard.
· The system is ready for configuration: Probe name, limitvalues, measuring cycles and alarms can be adapted to theindividual measuring tasks.
· The measurement data can always be shown as a graphic ortable.
· Various probes can be compiled into groups. Logical units bymeasurement task are thus formed.
· The measurement data view over days, weeks or months isfreely definable. The integrated calendar offers practicalassistance here.
· Form and time of the reporting are predefined once.
· The creation and saving of reports as a PDF file now takesplace automatically in accordance with the set conditions. Thefiles are therefore ready to be printed at any time.
Installation made easy
Clear and always up-to-date
Automated documentation
testo Saveris™ software
Cold storage house zone: Hourly mean values on 03.08.2007
°C freezer 1 %RH cold room 1 °C refrigeratorTime
Total maximum valueTotal mean valueTotal minimum value
°C drinks °C freezer 2 °C freezer 3 °C freezer 4
Daily report
11
4
5
PROF software, incl. USB con-necting cable base-PC
CFR software, incl. Ethernet con-necting cable base-PC
Order no.0572 0180
Order no.0572 0181
Order no.0572 0182
The PROF (Professional) software version offers interesting additionalfunctions beyond the attractive standard functions of the basic version SBE,e.g.:
· Client-server concept: The measurement data can be monitored byvarious PCs integrated into the network.
· Photographs of machines or rooms can be saved as a picture. Therespective measurement values are shown directly at the position of theprobe in the room or at the machine in these. The link between thelocation and the measurement value is thus very easily visualized (fig. 4).
· A comprehensive alarm management offers the option of alarming morethan two people at the same time or in succession. Depending on theday of the week or the time, it is possible to choose whether the alarm isgiven as an e-mail or an SMS.
· Tour planning with calendar management allows a clear presentation ofplanned and completed transports.
Now more flexible with Professional software
The CFR software fulfils the requirements of the FDA’s 21 CFRPart 11 and is thus validatable.
Validatable CFR software
Overview of software features
Overview of application areas Saveris software
SBE software, incl. USB connectingcable base-PC
• • •
• • •
• • •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
•
•
•
•
• • •
• •
• •
Diagrams / tables / Alarm overview / PDF reports
Calendar management
Presentation of probe groups
Alarm dispatch (e-mail, SMS, relay)
Comprehensive alarm management in stationary operation
Automated update of measurement data (“Online mode”) in stationary operation
Measurement data on background photo of measruement sites
Integration in network (client-server)
Tour planning with calendar management
Allocation of access rights for stationary and mobile probe groups
Search function for tours
Configuration of print text
Diagrams / tables with identification of start and stop of tour
21 CFR Part 11 compliant (validatable)
Electronic signature
Audit trail
Allocation of access rights on 3 user levels
Stationary operation
Mobile operation
Stationary and mobile operation
SBE PROF CFR
SBE PROF CFR
Small Business Edition (SBE), Professional (PROF) and CFR version
21 °C48 %RH
41 °C22 %RH
26 °C38 %RH
12
The base is the heart of testo Saveris and can save 40,000 readings permeasurement channel independently of the PC. The system data andalarms are visible via the display of the Saveris base.
SMS alarm (optional)
Up to 150 probes can be connected
Emergency battery integrated
Issue of alarms via LED/relay
Display for showing alarms and system data
Large data memory
Connection option via USB or Ethernet
868 MHz: EU countries and certain other countries (e.g. CH, CN,NOR)
Country list at www.testo.com/saveris
Note on the radio frequencies
-10 to +50 °C
DimensionsMemory
Rech. batt.
225 x 150 x 49 mm40,000 values per channel (total max. 18.000.000 values)
Li-ion battery (for data back-up and for emergency SMS with fai-lure of the power supply)
Oper. temp.
Die-cast zinc/plasticHousing material
Weight
Storage temp.
approx. 1510 g
-40 to +60 °C
6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screwterminals, power consumption 4 W
Protection class IP42
Power supply (absolutelynecessary)
Radio frequency
Display graphical display, 4 control keysInterfaces USB, radio, Ethernet
Alarm relay max. 1 A, max. 30 W, max. 60/25 V DC/AC, NC or NO contactGSM module 850/900/1800/1900 MHz
not valid for Japan and South Korea
Connectable radio probe max. 15 probes can be directly connected via radio interface,max. 150 total via radio / Router / Converter / Ethernet / Exten-der max. 450 channels
868 MHz
Set up Table base and wall bracket included
Technical data Ordering data
868MHz
Saveris base, radio frequency 868 MHz
Order no.0572 0220
868MHz
Saveris base, radio frequency 868 MHz,GSM module integrated (for SMSalarm)
Order no.0572 0221
No mains units or antennas with magnetic base are contained in this ordering data.
testo Saveris™ Base
13
The Saveris Cockpit Unit displays all measurement values to the driverwithout interruption during transport. If limit values are violated, thedriver is immediately warned. Alternatively, the complete data recordingcan be printed out at the handover site of the goods using an infraredprinter on the Cockpit Unit.
Printout of readings using infrared printer
Up to 8 probes can be connected
Emergency battery integrated
Alarms via LED
Display for showing alarms and system data
Large data memory
Wireless, USB and infrared interfaces
-30 to +65 °C
DimensionsMemory
approx. 150 x 90x 40 mmmax. 20.000 readings
Oper. temp.
PlasticHousing material
Weight
Storage temp.
approx. 210 g
-40 to +85 °C
Mini USB cable incl. adapter 12/24 V DC
Protection class IP40
Power supply (absolutelynecessary)
Radio frequency
Display graphical display, 4 control keysInterfaces Wireless, USB, infrared
Attachment Sucker pad with telescope function
Connectable radio probe up to 2 zones of 4 wireless probes each. max. 32 channels
868 MHz
Technical data Ordering data
868MHz
Saveris Cockpit Unit
Order no.0572 0222
testo Saveris™ Cockpit Unit
14
Saveris Router V 1.0 Saveris Converter V 1.0
-20 to +50 °C
· for Saveris Base FirmwareVersion V 1.X
· for Saveris BaseFirmwareVersion V 2.X
· for Saveris BaseFirmware Version V 1.X
approx. 85 x 100 x 38 mm
Radio Radio Radio Radio Radio
EthernetEthernetEthernet
Plastic
approx. 180 g approx. 190 g
-40 to +60 °C
IP54Radiomax. 5 max. 15
6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw ter-minals, power consumption
6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE,power consumption
Saveris router, V 1.0,868 MHz,radio transmission medium
Saveris router, V 2.0,868 MHz,radio transmission medium
Saveris Cverter V 2.0,868 MHz, converts the radiotransmission medium toEthernet
No mains units are contained in this ordering data.
868MHz
Power supply
Connectable radio probe
Use
Dimensions
Oper. temp.
Housing material
Weight
Storage temp.
Protection class
Versions
Interfaces
Saveris Cverter V 1.0,868 MHz, converts the radiotransmission medium toEthernet
Saveris Extender 868 MHz,converts the radio transmis-sion medium to Ethernet
Saveris Router V 2.0 Saveris ExtenderSaveris Converter V 2.0
· for Saveris BaseFirmwareVersion V 2.X
· for all Saveris Base Firmwareversions
· for wireless probes withFirmwareVersion V 2.X
Radio, Ethernetmax. 100
No -included
Router cascadingWall holder
Yes --
Order no.0572 0119
Order no.0572 0219
Order no.0572 0218
Order no.0572 0118
Order no.0572 0217
The radio link can be improved or lengthened in poor structural conditions by using a router. Several routers can of course be used in thetesto Saveris system. At the same time, the serial switching of up to 3 routers V 2.0 offers highest flexibility in the wireless range.
Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. Thiscombines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths.
By connecting an Extender, the wireless signal of a transport probe is converted into an Ethernet signal. The data transfer from probe toExtender takes place automatically when sufficient wireless connection is present.
testo Saveris™ components: Router, Converter and Extender
1
1
2
2
3
3
4
4
15
Alarm module (visual + acoustic), can beconnected to base alarm relay
Magnetic foot aerial (dual band)
Saveris protective housing
Testo fast printer
0554 0525Antenna with magnetic foot (quad band) for Base withGSM module
0440 6723Programming adapter (from Mini DIN to USB) for Ether-net probes, Converters and Extenders (necessary if noDHCP server available)
ISO temperature calibration certificate; temperature probe; cali-bration points -8 °C, 0 °C, +40 °C; per channel/instrument (suit-able for Saveris T1/T2)
0520 0171
Spare batteries for radio probes (4 x AA alkali manganese mignonbatteries) 0515 0414
International mains unit 100-240 V AC / 6.3 V DC; for mains ope-ration or battery charging in intrument 0554 1096
Mains unit (top-hat rail mounting) 90 to 264 VAC / 24 VDC (2.5 A) 0554 1749
Mains unit (desktop) 110 to 240 VAC / 24 VDC (350 mA) 0554 1748
Magnetic foot aerial (dual band) with 3 m cable, for Base withGSM module (not suitable for USA, Canada, Chile, Argentina,Mexico)
Saveris protective housing for protection from high-pressurecleaning and impact, IP 69 K suitable for wireless probes T1 /T1D / T2 / T2D
Testo fast printer with wireless infrared interface, 1 roll of ther-mal paper and 4 mignon batteries for printing out readings outon Saveris Cockpit Unit
0554 0524
0572 0200
0554 0549
Spare batteries for radio probes for operation below -10 °C (4 xEnergizer L91 Photo lithium) 0515 0572
Alarm module (optical + audible), connectable to Base alarmrelay, Ø 70 x 164 mm, 24 V AC/DC / 320 mA, permanentlight: rot, permanent tone: buzzer approx. 2.4 kHz (mains unit0554 1749 required)
SBE software, incl. USB connecting cable base-PC 0572 0180
0572 0181PROF software, incl. USB connecting cable base-PC
0572 9999ID-No. 0699 6111/1
Saveris adjustment software incl. connection cable to wirelessand Ethernet probes
CFR software, incl. Ethernet connecting cable base-PC
0572 0183
0572 0182
ISO temperature calibration certificate; temperature probe; cali-bration points -18 °C, 0 °C, +60 °C; per channel/instrument (suit-able for Saveris T1/T2)
0520 0151
Calibration certificates Order no.
Software Order no.
Power supply Order no.
Miscellaneous Order no.
DAkkS temperature calibration certificate*; temperature probe;calibration points -20 °C, 0 °C, +60 °C; per channel/instrument(suitable for Saveris T1/T2)
0520 0261
ISO humidity calibration certificate; humidity probe; calibrationpoints 11.3 % RH and 75.3 % RH at +25 °C/+77 °F; per chan-nel/instrument
0520 0076
DAkkS humidity calibration certificate*; humidity probe; calibrationpoints 11.3 % RH and 75.3 % RH at +25 °C/+77 °F; per chan-nel/instrument
0520 0246
*Successor organization of the DKD
testo Saveris™: Accessories
16
external
Probe versions with internal and external temperature sensors and with humidity sensors allow the adaptation to every application. The radio probesare available with or without a display as an option. Current measurement data, the battery status and the quality of the radio link are shown on the dis-play.
Order no.0572 1210 *
868MHz
Version without display
Version withdisplay
VersionsSaveris T1
Order no.0572 1220 *
Saveris T1 D
Order no.0572 1211 *
Saveris T2
Order no.0572 1221 *
Saveris T2 D
Order no.0572 9212 *
Saveris T3
Order no.0572 9222 *
SaverisT3D
Order no.0572 7211 *
Saveris Pt
Order no.0572 7221 *
Saveris Pt D
TC
external
TC Pt100
external
Radio probe with internal NTC Radio probe with external probe con-nection and internal NTC, door contact
2-channel radio probe with 2 external TCprobe connections (TC characteristics canbe selected)
Radio probe with 1 external Pt100 probeconnection
0.1 °C
Measuring rangeAccuracy
-35 to +50 °C± 0.4 °C (-25 to +50 °C)±0.8 °C (remaining meas. range)
Resolution
Measuring range(instrument)
Accuracy (instrument)
Resolution (instrument)
Dimensions (housing):
Oper. temp.
Probe type
Probe type
NTC
Weight
Storage temp.
Meas. cycle
Protection class IP68
Conformity with standards
Radio frequency
NTC via Mini DIN socket,Door contact connection cableincluded in delivery (1.80 m)
Connection
Battery life(Type: 4 x AA)
Display (optional)Transmission distance
Saveris T1
0.1 °C
-35 to +50 °C± 0.4 °C (-25 to +50 °C)±0.8 °C (remaining meas. range)
NTC
0.1 °C
-50 to +150 °C
± 0.2 °C (-25 to +70 °C)±0.4 °C (remaining meas.range)
NTC
Saveris T2
2 TCs via TC socket, max. diffe-rence in potential 2 V
-200 to +400 °C
TC type T
0.1 °C / TC Type S 1 °C
-195 to +1350 °C
±0.5 °C or 0.5% of reading)
TC Type K
0 to +1760 °C
TC type S-100 to +750 °C
TC Type J
IP54
Saveris T3
1 Pt100 via mini-DIN socket0.01 °C
-200 to +600 °C
at 25 °C± 0.1 °C (0 to +60 °C)±0.2 °C (-100 to +200 °C)±0.5 °C (remaining meas.range)
Pt100
IP68
Saveris Pt
Housing material
-35 to +50 °C
80 x 85 x 38 mm
approx. 240 g
Standard 15 min, can be set from 1 min up to 24 hMemory 6.000 readings
-40 to +55 °C
DIN EN 12830
Battery life 3 years at +25 °C; 3 years with Energizer L91 Photo lithium batteries for freezer applications
-20 to +50 °C
2-line LCD; 7 segments with symbolsapprox. 300 m free field at a frequency of 868 MHz, approx. 100 m free field at a frequency of 2.4 GHz
Plastic
868 MHz / 2.4 GHz
Wall holder included
°C / °F
Radio
Internalsensor
Externalprobe
81m
m
81m
m
81m
m
81m
m
The AA alkali manganese mignon batteries (0515 0414) are contained in this ordering data (excepting analog coupler). Saveris probes are delivered with a calibration protocol of the works adjustment data.Calibration certificates must be ordered separately.
* The Saveris Converter V 2.0 (order no. 0572 0218) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X For more information please contact your Testo partner.
internal
NTC
internal
NTC
testo Saveris™ components: Radio probe
17
868MHz
Version withoutdisplay
Version withdisplay
Versions
Order no.0572 6222 *
Saveris H2D
Order no.0572 6210 *
Saveris H3
Order no.0572 6220 *
Saveris H3 DOrder no.0572 6224 *
Saveris H4D
Order no.0572 3210 *
Saveris U1
Radio
% RH NTC
external
NTC% RH
internal
% RH NTC
external
0.1 °C / 0.1 °Ctd
0 - 100 %RH
±3 % RH
Humidity sen-sor
0.1 °C
Measuring range
Accuracy
-20 to +50 °C
± 0.5 °C
Resolution
Meas. range (instrument)
Accuracy (instrument)
Resolution (instrument)
Dimensions (housing):
Oper. temp.
Probe type
Probe type
Weight
Storage temp.
Meas. cycle
Protection class IP54Radio frequency
Connection
Battery life(Type: 4 x AA)
Display (optional)Transmission distance
Saveris H2D
0.1 °C
-20 to +50 °C
± 0.5 °C
NTC
Saveris H3
1 x external humidity probeMini DIN socket
-20 to +70 �NTC
0 to +100 %RH **Humidity sensor
IP42
Saveris H4D
2/4-wire current/voltage input
Saveris U1
Housing material
85 x 100 x 38 mmapprox. 256 g
2-line LCD; 7 segments with symbolsapprox. 300 m free field at a frequency of 868 MHz, approx. 100 m free field at a frequency of 2.4 GHz
Wall holder included
°C / °F and %RH
Internalsensor
Externalprobe
mA and V
1 channel: Current/voltage input
± 0.2 °C see probes
NTC Humidity sensor0 to +100 %RH **
0,1%/0.1 °Ctd
to 90 %RH: ±2 % RH> 90 %RH: ±3 % RH
2-wire: 4 ... 20 mA 4-wire: 0/4 ... 20mA, 0 to 1/5/10 V, load: max. 160 W at24 V DC
Current ±0.03 mA / 0.75 µAVoltage 0 to 1 V ±1.5 mV/39 µVVoltage 0 to 5 V ±7.5 mV / 0.17 mVVoltage 0 to 10 V ±15 mV / 0,34 mV±0.02% of m.v./K deviating from nominaltemperature 22 °C
fixed stump probe
Service interface Mini DIN for adjustment
approx. 85 x 100 x 38 mmapprox. 240 g
80 x 85 x 38 mmapprox. 245 g
Batery life 3 years at +25 °C; 3 years with Energizer L91 Photo lithium batteries for freezer applications
Plastic
-40 to +55 °C-20 to +50 °C
Standard 15 min, can be set from 1 min up to 24 h868 MHz / 2.4 GHz
IP54
Memory 6.000 readings
** not for continuous high-humidity applications
(no display)
0.1 °C 0,1%/0.1 °Ctd
Humidity radio probe Radio probe with 1 external humidityprobe connection
Radio probe with current/voltage input
mA V
internal
Supply: Mains unit 6.3 V DC, 2 to30 V DC max. 25 V AC
Humidity radio probe
* The Saveris Converter V 2.0 (order no. 0572 0218) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X For more information please contact your Testo partner.
The AA alkali manganese mignon batteries (0515 0414) are contained in this ordering data (excepting analog coupler). Saveris probes are delivered with a calibration protocol of the works adjustment data.Calibration certificates must be ordered separately.
testo Saveris™ components: Radio probe
18
Pt100
external
TC
externalexternal
NTC
Measuring range(instrument)
Accuracy (instrument)
Resolution (instrument)
Dimensions (housing):
Buffer battery
Oper. temp.
Probe type
Weight
Storage temp.
Meas. cycleProtection class IP54
Connection
Display (optional)
Saveris T1E
0.1 °C
-50 to +150 °C
± 0.2 °C (-25 to +70 °C)±0.4 °C (remaining meas.range)
NTC
Saveris T4 E
4 TCs via TC socketmax. potential difference 50 V
-200 to +400 °C
TC type T
0.1 °C / TC Type S 1 °C
-195 to +1350 °C
±0.5 °C or 0.5% of reading)
TC Type K
0 to +1760 °C
TC type S-100 to +750 °C
TC Type J
Saveris Pt E
1 Pt100 via mini-DIN socket0.01 °C
-200 to +600 °C
at 25 °C± 0.1 °C (0 to +60 °C)±0.2 °C (-100 to +200 °C)±0.5 °C (remaining meas.range)
Pt100
Housing material
-20 to +60 °C
Li-ion
approx. 85 x 100 x 38 mmapprox. 220 g
2 sec to 24 h
-40 to +60 °C
2-line LCD; 7 segments with symbols
Plastic
Memory 6000 readings
Wall holder included
°C
Externalprobe
Mini-DIN service interface for adjustment is accessible externally
Power consumption PoE Class 0 (typically ≤ 3 W)
Supply 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE
Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery.
Ethernet
1 NTC via mini-DIN socket
The existing LAN infrastructure can be used through the Ethernet probe. This allows the data transfer from the probe to the base, even over long dis-tances. Ethernet probes have a display.
Ethernet probe with external NTC probeconnection
4-channel Ethernet probe with 4 external TC probeconnections
Ethernet probe with external Pt100 probeconnection
Order no.0572 7191
Order no.0572 9194
Order no.0572 1191
Saveris Pt EWith display
Saveris T4 EWith display
Saveris T1EWith display
Versions
testo Saveris™ components: Ethernet probes
19
mA V
internal
% RH NTC
externalexternal
% RH NTC% RH NTC
external
0.1 °C
Measuring range
Accuracy
-20 to +70 �
± 0.2 °C (0 to +30 °C)±0.5 °C (remainingmeas. range)
Measuring range(instrument)Accuracy (instrument)
Resolution (instrument)
Dimensions (housing):
Oper. temp.
Probe type
Probe type
Weight
Storage temp.
Meas. cycleProtection class
Connection
Display (optional)
Saveris H1E Saveris H2 E
1 x external humidity probe Mini DIN so-cket
-20 to +70 �NTC
0 to 100 %RH*Humidity sensor
Saveris H4E Saveris U1E
Housing material
approx. 230 g
2-line LCD; 7 segments with symbolsWall holder included
°C / °F and %RH
Internalsensor
Externalprobe
mA and V
1 channel: Current/voltage input
± 0.2 °C (-20 to+70 °C)
see external probes
NTC Humidity sensor0 to 100 %RH*
0.1% / 0.1 °Ctd
to 90 %RH: ±(1 %RH+0.7 % of m.v.) at +25°C> 90 %RH: ±(1.4 %RH+0.7 % of m.v.) at +25°C
2-wire: 4 ... 20 mA 4-wire: 0/4 ... 20 mA, 0 to1/5/10V, load: max. 160 W at 24 V DC
Current ±0.03 mA / 0.75 µAVoltage 0 to 1 V ±1.5 mV / 39 µVVoltage 0 to 5 V ±7.5 mV / 0.17 mVVoltage 0 to 10 V ±15 mV / 0.34 mV±0.02% of m.v./K deviating from nominaltemperature 22 °C
1 x 2/4-wire current/voltage input
approx. 240 gapprox. 85 x 100 x 38 mm
approx. 254 g
Plastic
Sintered PTFE filter, Ø 12 mm, for aggressive media, high-humidity applications (long-term measurements), high flow velocities)
Testo saline pots for monitoring and humidity adjustment of humidity probes, 11.3% RH and 75.3% RH, incl. adapter forhumidity probe, quick check or calibration of humidity probe
Sintered caps for Saveris H1 E, H2 E and H2D Ethernet probes Order no.
0554 0755
0554 0757
0554 0756
0554 0660
Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery.*not for continuous high-humidity applications
0554 0647
0.1 °C
-20 to +70 �
± 0.2 °C (0 to +30 °C)±0.5 °C (remainingmeas. range)
NTC Humidity sensor0 to 100 %RH*
0.1% / 0.1 °Ctd
to 90 %RH: ±(1 %RH+0.7 % of m.v.) at +25°C> 90 %RH: ±(1.4 %RH+0.7 % of m.v.) at +25°C
Mini-DIN service interface for adjustment is accessible externally
Power consumption PoE Class 0 (typically ≤ 3 W)
IP54
Supply 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE
Buffer battery Li-ion
Ethernet
Humidity Ethernet probe 1% Humidity Ethernet probe 2 % Ethernet probe with external humidityprobe connection
Radio probe with current/voltage input
0.1 °C 0.1%/0.1 °Ctd
2 sec to 24 h
-20 to +60 °C
-40 to +60 °C
Memory 6.000 readings
no display
Metal protective cap, Ø 12 mm for humidity probes, for measurement at flow velocities les than 10 m/s
Cap with wire fabric filter, Ø 12 mm
Stainless steel sintered filter, pore size 100 µm, sensor protection for dusty atmospheres or higher flow velocities, for measurementin high flow velocities or contaminated air
Order no.0572 6191
Order no.0572 6192
Order no.0572 6194
Order no.0572 3190
Saveris H1 EWith display
Saveris H2 EWith display
Saveris H4EWith display
Saveris U1Eno display
Versions
testo Saveris™ components: Ethernet probes
20
Meas. range AccuracyIllustrationPlug-in probes t99 Order no.
Meas. range AccuracyIllustration t99 Order no.
The specified accuracy class of the Saveris radio and Ethernet probe is achieved using these exter-nal probes.
40 mm
Ø 6 mm
Stationary probe with stainless steel sheath, TCType K
0628 7533-50 to +205 °C Class 2* 20sec
Connection: Fixed cable 1.9 m
395 mm
20m
mPipe wrap probe with Velcro tape, for measuringtemperatures on pipes with diameters up to max.120 mm, Tmax +120°C, TC type K
0628 0020-50 to +120 °C Class 1* 90sec
Connection: Fixed cable 1.5 m
Pipe wrap probe for pipe diameters from 5 - 65 mm,with exchangeable measuring head, measuringrange briefly up to +280°C, TC type K
0602 4592-60 to +130 °C Class 2* 5sec
Connection: Fixed cable 1.2 m
800 mm
Ø 1.5 mm
Thermocouple with TC plug, flexible, length 800mm, fibreglass, TC Type K
0602 0644-50 to +400 °C Class 2* 5sec
1500 mm
Ø 1.5 mm
Thermocouple with TC plug, flexible, length 1500mm, fibreglass, TC Type K
0602 0645-50 to +400 °C Class 2* 5sec
1500 mm
Ø 1.5 mm
Thermocouple with TC plug, flexible, length 1500mm, fibreglass, TC Type K
0602 0646-50 to +250 °C Class 2* 5sec
500 mm
Ø 1.5 mm
Immersion measuring tip, flexible, TC type K 0602 5792-200 to +1000°C
Class 1* 5sec
75 mm
Ø 21 mmMagnetic probe, adhesive power approx. 10 N, withmagnets, for higher temperatures, for measurementson metal surfaces, TC type K
0602 4892-50 to +400 °C Class 2*
Connection: Fixed cable 1.6 m
35 mmØ 20 mm
Magnetic probe, adhesive power approx. 20 N, withmagnets, for measurements on metal surfaces, TCtype K
0602 4792-50 to +170 °C Class 2* 150sec
Fixed cable extended
1000 mm
Ø 3 mm
Immersion measuring tip, flexible, for measure-ments in air/exhaust gases (not suitable for mea-surements in smelters
0602 5693-200 to+1300 °C
Class 1* 4sec
*Acc. to norm EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), Class 2 to -40to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K).
Robust, Pt100 stainless steel food probe (IP65)
Penetration probe Pt100 with ribbon cable,cable length 2 m, IP 54
0609 2272
0572 7001
-50 to +400 °C
-50 to +180 °C
Class A (-50 to +300 °C),Class B (rem. meas. range)
Class A
10sec
10sec
Ø 4 mm
Ø 5 mm
125 mm
60 mm
Connection: Fixed cable extendedØ 3 mm
Ø 3.6 mm
15 mm
30 mm
Robust, watertight Pt100 immersion/penetra-tion probe
0609 1273-50 to +400 °C Class A (-50 to +300 °C),Class B (rem. meas. range)
12secØ 5 mm
114 mm
Fixed cable extendedØ 3.7 mm
50 mm
Ø 3.6 mm
30 mm
Plug-in probes
TC
115 mm
60 mm
Ø 4 mm
Ø 5 mm
Robust air probe, TC Type K
Penetration probe TC with ribbon cable, Type K,cable length 2 m, IP 54
0602 1793
0572 9001
-60 to +400 °C
-40 to + 220 °C
Class 2*
Class 1
25sec
7sec
Connection: Fixed cable 1.2 m
Connection cable for unlimited Pt100 stationary probes with screw terminals (4-wire technology) 0554 0213
Pt100
testo Saveris™ accessories: External temperature probes
21
Meas. range Probe accuracyIllustration t99 Order no.
35 mm
Ø 3 mm
Stump probe, IP 54 0628 7510-20 to +70 � ± 0.2 °C (-20 to +40 °C)±0.4 °C (+40.1 to +70 °C)
15sec
40 mm
Ø 6 mm
Stationary probe with aluminium sleeve, IP 65 0628 7503*-30 to +90 °C ± 0.2 °C (0 to +70 °C)±0.5 °C (remaining meas. range)
190sec
Connection: Fixed cable; Cable length: 2.4 m
40 mm
Ø 3 mm Ø 3 mm
Accurate immersion/penetration probe, cablelength 6 m, IP 67
0610 1725*-35 to +80 °C ± 0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)
5sec
Connection: Fixed cable; Cable length: 6 m
40 mm
60 mm
Ø 3 mm
Ø 5 mm
Ø 3 mm
Ø 3.6 mm
30 mm
Accurate immersion/penetration probe, cablelength 1,5 m, IP 67
Penetration probe NTC with ribbon cable,cable length 2 m, IP 54
0628 0006*
0572 1001
-35 to +80 °C
-40 to +125 °C
± 0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)
±0.5 % of reading (+100 to +125 °C)±0.2 °C (-25 to +80 °C)±0.4 °C (remaining meas. range)
5sec
8sec
Connection: Fixed cable; Cable length: 1.5 m
Wall surface temperature probe, e. g. for proof ofstructural damage in buildings
0628 7507-50 to +80 °C ± 0.2 °C (0 to +70 °C) 20sec
Connection: Fixed cable; Cable length: 3 m
300 mm
30m
m
Pipe wrap probe with Velcro tape for pipe diame-ters of up to max. 75 mm, Tmax. +75°C, NTC
0613 4611-50 to +70 � ± 0.2 °C (-25 to +70 °C)±0.4 °C (-50 to -25.1 °C)
Connection: Fixed cable; Cable length: 1.5 m
125 mm
Ø 4 mm
15 mm
Ø 3 mm
Stainless steel NTC food probe (IP65) with PUline
0613 2211*-50 to +150 °C2) ±0.5 % of reading (+100 to +150 °C)±0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)
8sec
Connection: Fixed cable; Cable length: 1.6 m
Connection: Fixed cable extended
115 mm
Ø 5 mm
50 mm
Ø 4 mm
Watertight NTC immersion/penetration probe 0613 1212-50 to +150 °C ±0.5 % of reading (+100 to +150 °C)±0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)
10sec
Plug-in probesNTC
Meas. range AccuracyIllustration Order no.
Ø 12 mmHumidity / temperature probe 12 mm 0572 6172-20 to +70 °C,
0 to +100 %RH±0.3 °C, ±2 %RH (2 to 98%RH)
Ø 4 mmHumidity / temperature probe 4 mm 0572 61740 to +40 °C, 0 to+100 %RH
±0.3 °C, ±2 %RH (2 to 98%RH)
The specified accuracy class of the Saveris radio and Ethernet probe is achieved using theseexternal probes.
*Probe tested according to EN 12830 for suitability for the areas of transport and storage2) Long-term measuring range to +125 °C, briefly to +150 °C or +140 °C (2 minutes)
Plug-in probes% RH
testo Saveris™ accessories: External temperature and humidity probes
All testo Saveris probes are of course adjusted in the factory, as confirmedby an adjustment report. You can perform further calibrations oradjustments either yourself on site, via a service provider or in a calibrationlaboratory. The separate Saveris adjustment software is available for this.After successful adjustment, the current adjustment data is stored in theprobe. At the same time, the adjustment software and the Saverissoftware accept this data so that the adjustment histories are available.
Radio and Ethernet probes are connected to a cable via the serviceinterface for adjustment.
If you do not wish to perform your own calibration, Testo is available as aservice provider.
Saveris adjustment software incl.connection cable to wireless andEthernet probes
Order no.0572 0183
22
All components can be assembled individually by you.However, you also have the option of ordering a testo Saveris set.This can be supplemented with individual components as required.
Set / 868 MHz
Order no. 0572 0210
Set: 868 MHz, consisting of base 0572 0220, 3 NTCradio probes without display 0572 1210, mains unitfor base 0554 1096 and SBE software 0572 0180incl. USB cable
testo Saveris™ set
Adjustment
23
Testo is a manufacturer of measuring instruments and measuring systemswith a global presence, with 27 international subsidiaries andrepresentatives in numerous countries. Naturally, testo also offers you on-site service. For questions regarding testo SaverisTM, from installation toretrofitting further system components, please refer to your competentcontact in your country.
You can find an overview of the nearest service location atwww.testo.com
Service
Recommended