Testo - Saveris Wireless Temperature and Humidity Monitoring System

0981

8114

/msp

/Si/A

/02.

2011

Sub

ject

toch

ange

with

outn

otic

e.

Everything under control:With testo SaverisTM, measurement data areunder control everywhere.

Committing to the future

2

The data monitoring system testo Saveris measures the temperature and humidity values ofsensitive goods and products in the environment, in processes and during transport. Theeasy-to-use measurement system delivers safety and savings in time and costs thanks toautomated measurement data recording. In stationary operation, the transfer of themeasurement data takes place via wireless and/or Ethernet connection to a base station. Thisdocuments and monitors all measurement data. If limit values are exceeded, a whole range ofdifferent alarm options, such as SMS/e-mail alarm or alarm relay is available. Remote alarmscan even be given when the system is not connected to a running PC.

Unlimited data monitoring.Whether stationary or mobile.

3

If measurement parameters are documented during transport, the driver receives all necessary information and alarmsfrom a Cockpit Unit in the driver’s cabin. Documentation and monitoring takes place via wireless probes, the time-consuming installation of wired sensors in the truck is unnecessary. At the same time, the possibility of printing outmeasurement values at the handover of goods, using an infrared printer, also exists.

All data recorded, whether stationary or on the road, are centrally stored in a software. At the same time, Saverisallows the comprehensive analysis and evaluation of all recorded measurement data.

With testo Saveris, all measurement data are under control, whether stationary or on the road.

4

Overview of application areas

Monitoring of processes in the pharmaceutical industry

In the pharmaceutical industry, high demands are placed on therecording and monitoring of quality parameters. Constantdocumentation during the production, storage and transportation oftemperature-sensitive products such as medicines, blood products orcell cultures has long been considered an absolute “must”.

testo Saveris automates the central documentation of measurementdata as well as the safe monitoring of refrigerated and deep-freezerooms, incubators and climate cabinets. At the same time, the systemallows the uninterrupted recording of measurement data, even duringthe transport of temperature or humidity-critical products such asmedicaments or vaccines. This means testo Saveris offers the optimumcontrol of production and storage, via transport, up to delivery.

The comprehensive alarm management allows fast alarming if limitvalues are violated. Thanks to a combination of wireless and/orEthernet probes, the system is optimum for many different applicationsin the pharmaceutical industry. It goes without saying that the datamonitoring system testo Saveris meets the requirements of 21 CFRPart 11.

5

Monitoring of processes in research and development, laboratories and hospitals

Research and development areas as well as laboratories and hospitals are responsible for the recording ofambient and process data in order to monitor sensitive products or machines. However, the monitoring oftemperature and humidity-critical goods during transport is also crucial for a high standard of quality. testoSaveris carries out the central documentation of the measurement series, for stationary as well as fortransport applications.

testo Saveris thus guarantees the simple and secure monitoring of climate and process data in airconditioning chambers, refrigerators, drying chambers, test benches or blood banks. If critical values areto be monitored during transport, testo Saveris offers the optimum solution.

Monitoring of the building climate

When monitoring the building climate, stable ambient conditions areespecially necessary in museums and archives in order to protectsensitive and expensive objects. During transportation, valuablegoods must be constantly monitored.testo Saveris automates the central recording of all climate data,stationary as well as during transport.By issuing alarms when limit values are exceeded, testo Saverisprotects valuable inventory from undesired temperature or humidityinfluences at all times. The radio probe can be flexibly attached tolocations without the effort of routing cables.

6

Monitoring the foodstuff cooling chain

Compliance with predefined temperature values is a decisive factorfor quality in food production and is important for complying with legalhygiene standards. However, the decisive factor is the uninterruptedmonitoring of the cold chain during production, storage, and aboveall, during transport. Only this uninterrupted monitoring provides afinal guarantee that the quality and freshness of the products can becertified. testo Saveris automates not only the monitoring of theambient and production temperatures during production and storage,but also of defined temperature limit values during transport. Theinstallation of wireless probes in delivery vehicles makes thecomplicated wiring of the driver’s cabin unnecessary. Alarms areissued whenever the limit values are exceeded.

The measurement data from stationary and transport applications aresaved centrally in a database and are accessible at any time. Allmeasurement values are under control! testo Saveris conforms to theEN 12830 standard.

Overview of application areas

7

Monitoring in production, transport and storage inindustry

In industry, a number of quality data must be recorded andmonitored in the production, storage and transport of products.testo Saveris automates the documentation of these data andalarms when limit values are exceeded. Products and processesare thus guaranteed at a high level of quality.

testo Saveris is ideal for use in the monitoring and documentationof ambient and temperature data in production areas, storerooms,refrigerators and climate cabinets. At the same time, testo Saverisallows the uninterrupted recording of measurement parametersduring the transport of sensitive products. The most variedapplications, stationary as well as in transport, are optimallycovered by testo Saveris radio probes and/or Ethernet probes.

8

testo SaverisTMconverter V 2.0testo SaverisTM

router V 2.0

testo SaverisTM

wireless probe

testo Saveris Ethernet probetesto Saveris radio probe

testo SaverisTM

analog coupler(wireless)

Ethernet

testo SaverisTM

analog coupler(Ethernet)

Humidity trans-mitters

testo Saveris™ system overviewData monitoring for uninterrupted checks

testo SaverisTM wireless probe

Probe versions with internal and exter-nal temperature and humidity sensorsallow the adaptation to every applica-tion. The radio probes are availablewith or without a display as an option.Current measurement data, the bat-tery status and the quality of the radiolink are shown on the display.

testo SaverisTM converter

Through the connection of a converterto an Ethernet jack, the signal of a radioprobe can be converted into an Ether-net signal. This combines the flexibleconnection of the radio probe with theuse of the existing Ethernet even overlong transmission paths.

Humidity transmitters testo 6651/6681/6351/6381

The two versions of the analog coupler (wireless / Ethernet) allow theinclusion of other measurement parameters into the testo Saveris mo-nitoring system, by integrating all measurement transmitters withstandarized current/voltage interfaces, e. g. 4 to 20 mA or 0 to 10 V.

testo SaverisTM router

The radio link can be improved orlengthened in poor structural conditi-ons by using a router. Several routerscan of course be used in the testo Sa-veris system. At the same time, theserial switching of up to 3 routersV 2.0 offers highest flexibility in the wi-reless range.

testo SaverisTM analog coupler

The two versions of the analog coupler (wireless / Ethernet) allow theinclusion of other measurement parameters into the testo Saveris mo-nitoring system, by integrating all measurement transmitters withstandarized current/voltage interfaces, e. g. 4 to 20 mA or 0 to 10 V.

9

USB or Ethernet

testo Saver-isTMBase

Ethernet

testo SaverisTM

Ethernet probe

testo SaverisTM

Software

testo SaverisTM

Control unit

Ethernet

Control unit

testo SaverisTM Base

The base is the heart of testo Saverisand can save 40,000 readings permeasurement channel independentlyof the PC. This corresponds to aroundone year of memory capacity at ameasuring rate of 15 minutes. Thesystem data and alarms are visible viathe display of the Saveris base.

testo SaverisTM extender

By connecting a Saveris Extender, thewireless signal of a transport probe isconverted into an Ethernet signal. Thedata transfer from wireless probe toExtender takes place automaticallywhen sufficient wireless connection ispresent.

testo SaverisTM Cockpit Unit

The Saveris Cockpit Unit displays allmeasurement values to the driver un-interruptedly during transport. If limitvalues are violated, the driver is imme-diately warned. Alternatively, the com-plete data recording can be printedout at the handover site of the goodsusing the Testo printer on the CockpitUnit.

testo SaverisTM Ethernet probe

In addition to the radio probes, probescan be used that are directly con-nected to the Ethernet. The existingLAN infrastructure can be usedthrough this. This allows the datatransfer from the probe to the base,even over long distances.

testo SaverisTM software

The testo Saveris software offers simple operation and anintuitive user interface. The Saveris software is available inthree different versions: as the basic version SBE (SmallBusiness Edition), the PROF (Professional) software versionwith diverse additional options, or as the CFR version. TheCFR software fulfils the requirements of the FDA’s 21 CFRPart 11 and is thus validatable.

10

1

2

3

· Connect Saveris base to mains. The probes can now belogged on at the base: They are switched on in series andautomatically identified by the base.

· The Saveris base is connected to the PC via USB or Ethernet.The software is installed on the PC with help from theinstallation wizard.

· The system is ready for configuration: Probe name, limitvalues, measuring cycles and alarms can be adapted to theindividual measuring tasks.

· The measurement data can always be shown as a graphic ortable.

· Various probes can be compiled into groups. Logical units bymeasurement task are thus formed.

· The measurement data view over days, weeks or months isfreely definable. The integrated calendar offers practicalassistance here.

· Form and time of the reporting are predefined once.

· The creation and saving of reports as a PDF file now takesplace automatically in accordance with the set conditions. Thefiles are therefore ready to be printed at any time.

Installation made easy

Clear and always up-to-date

Automated documentation

testo Saveris™ software

Cold storage house zone: Hourly mean values on 03.08.2007

°C freezer 1 %RH cold room 1 °C refrigeratorTime

Total maximum valueTotal mean valueTotal minimum value

°C drinks °C freezer 2 °C freezer 3 °C freezer 4

Daily report

11

4

5

PROF software, incl. USB con-necting cable base-PC

CFR software, incl. Ethernet con-necting cable base-PC

Order no.0572 0180

Order no.0572 0181

Order no.0572 0182

The PROF (Professional) software version offers interesting additionalfunctions beyond the attractive standard functions of the basic version SBE,e.g.:

· Client-server concept: The measurement data can be monitored byvarious PCs integrated into the network.

· Photographs of machines or rooms can be saved as a picture. Therespective measurement values are shown directly at the position of theprobe in the room or at the machine in these. The link between thelocation and the measurement value is thus very easily visualized (fig. 4).

· A comprehensive alarm management offers the option of alarming morethan two people at the same time or in succession. Depending on theday of the week or the time, it is possible to choose whether the alarm isgiven as an e-mail or an SMS.

· Tour planning with calendar management allows a clear presentation ofplanned and completed transports.

Now more flexible with Professional software

The CFR software fulfils the requirements of the FDA’s 21 CFRPart 11 and is thus validatable.

Validatable CFR software

Overview of software features

Overview of application areas Saveris software

SBE software, incl. USB connectingcable base-PC

• • •

• • •

• • •

• • •

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

•

•

•

• • •

• •

• •

Diagrams / tables / Alarm overview / PDF reports

Calendar management

Presentation of probe groups

Alarm dispatch (e-mail, SMS, relay)

Comprehensive alarm management in stationary operation

Automated update of measurement data (“Online mode”) in stationary operation

Measurement data on background photo of measruement sites

Integration in network (client-server)

Tour planning with calendar management

Allocation of access rights for stationary and mobile probe groups

Search function for tours

Configuration of print text

Diagrams / tables with identification of start and stop of tour

21 CFR Part 11 compliant (validatable)

Electronic signature

Audit trail

Allocation of access rights on 3 user levels

Stationary operation

Mobile operation

Stationary and mobile operation

SBE PROF CFR

SBE PROF CFR

Small Business Edition (SBE), Professional (PROF) and CFR version

21 °C48 %RH

41 °C22 %RH

26 °C38 %RH

12

The base is the heart of testo Saveris and can save 40,000 readings permeasurement channel independently of the PC. The system data andalarms are visible via the display of the Saveris base.

SMS alarm (optional)

Up to 150 probes can be connected

Emergency battery integrated

Issue of alarms via LED/relay

Display for showing alarms and system data

Large data memory

Connection option via USB or Ethernet

868 MHz: EU countries and certain other countries (e.g. CH, CN,NOR)

Country list at www.testo.com/saveris

Note on the radio frequencies

-10 to +50 °C

DimensionsMemory

Rech. batt.

225 x 150 x 49 mm40,000 values per channel (total max. 18.000.000 values)

Li-ion battery (for data back-up and for emergency SMS with fai-lure of the power supply)

Oper. temp.

Die-cast zinc/plasticHousing material

Weight

Storage temp.

approx. 1510 g

-40 to +60 °C

6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screwterminals, power consumption 4 W

Protection class IP42

Power supply (absolutelynecessary)

Radio frequency

Display graphical display, 4 control keysInterfaces USB, radio, Ethernet

Alarm relay max. 1 A, max. 30 W, max. 60/25 V DC/AC, NC or NO contactGSM module 850/900/1800/1900 MHz

not valid for Japan and South Korea

Connectable radio probe max. 15 probes can be directly connected via radio interface,max. 150 total via radio / Router / Converter / Ethernet / Exten-der max. 450 channels

868 MHz

Set up Table base and wall bracket included

Technical data Ordering data

868MHz

Saveris base, radio frequency 868 MHz

Order no.0572 0220

868MHz

Saveris base, radio frequency 868 MHz,GSM module integrated (for SMSalarm)

Order no.0572 0221

No mains units or antennas with magnetic base are contained in this ordering data.

testo Saveris™ Base

13

The Saveris Cockpit Unit displays all measurement values to the driverwithout interruption during transport. If limit values are violated, thedriver is immediately warned. Alternatively, the complete data recordingcan be printed out at the handover site of the goods using an infraredprinter on the Cockpit Unit.

Printout of readings using infrared printer

Up to 8 probes can be connected

Emergency battery integrated

Alarms via LED

Display for showing alarms and system data

Large data memory

Wireless, USB and infrared interfaces

-30 to +65 °C

DimensionsMemory

approx. 150 x 90x 40 mmmax. 20.000 readings

Oper. temp.

PlasticHousing material

Weight

Storage temp.

approx. 210 g

-40 to +85 °C

Mini USB cable incl. adapter 12/24 V DC


Power supply (absolutelynecessary)

Radio frequency

Display graphical display, 4 control keysInterfaces Wireless, USB, infrared

Attachment Sucker pad with telescope function

Connectable radio probe up to 2 zones of 4 wireless probes each. max. 32 channels

868 MHz

Technical data Ordering data

868MHz

Saveris Cockpit Unit

Order no.0572 0222

testo Saveris™ Cockpit Unit

14

Saveris Router V 1.0 Saveris Converter V 1.0

-20 to +50 °C

· for Saveris Base FirmwareVersion V 1.X

· for Saveris BaseFirmwareVersion V 2.X

· for Saveris BaseFirmware Version V 1.X

approx. 85 x 100 x 38 mm

Radio Radio Radio Radio Radio

EthernetEthernetEthernet

Plastic

approx. 180 g approx. 190 g

-40 to +60 °C

IP54Radiomax. 5 max. 15

6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw ter-minals, power consumption

6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE,power consumption

Saveris router, V 1.0,868 MHz,radio transmission medium

Saveris router, V 2.0,868 MHz,radio transmission medium

Saveris Cverter V 2.0,868 MHz, converts the radiotransmission medium toEthernet

No mains units are contained in this ordering data.

868MHz

Power supply

Connectable radio probe

Use

Dimensions

Oper. temp.

Housing material

Weight

Storage temp.

Protection class

Versions

Interfaces

Saveris Cverter V 1.0,868 MHz, converts the radiotransmission medium toEthernet

Saveris Extender 868 MHz,converts the radio transmis-sion medium to Ethernet

Saveris Router V 2.0 Saveris ExtenderSaveris Converter V 2.0

· for Saveris BaseFirmwareVersion V 2.X

· for all Saveris Base Firmwareversions

· for wireless probes withFirmwareVersion V 2.X

Radio, Ethernetmax. 100

No -included

Router cascadingWall holder

Yes --

Order no.0572 0119

Order no.0572 0219

Order no.0572 0218

Order no.0572 0118

Order no.0572 0217

The radio link can be improved or lengthened in poor structural conditions by using a router. Several routers can of course be used in thetesto Saveris system. At the same time, the serial switching of up to 3 routers V 2.0 offers highest flexibility in the wireless range.

Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. Thiscombines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths.

By connecting an Extender, the wireless signal of a transport probe is converted into an Ethernet signal. The data transfer from probe toExtender takes place automatically when sufficient wireless connection is present.

testo Saveris™ components: Router, Converter and Extender

1

1

2

2

3

3

4

4

15

Alarm module (visual + acoustic), can beconnected to base alarm relay

Magnetic foot aerial (dual band)

Saveris protective housing

Testo fast printer

0554 0525Antenna with magnetic foot (quad band) for Base withGSM module

0440 6723Programming adapter (from Mini DIN to USB) for Ether-net probes, Converters and Extenders (necessary if noDHCP server available)

ISO temperature calibration certificate; temperature probe; cali-bration points -8 °C, 0 °C, +40 °C; per channel/instrument (suit-able for Saveris T1/T2)

0520 0171

Spare batteries for radio probes (4 x AA alkali manganese mignonbatteries) 0515 0414

International mains unit 100-240 V AC / 6.3 V DC; for mains ope-ration or battery charging in intrument 0554 1096

Mains unit (top-hat rail mounting) 90 to 264 VAC / 24 VDC (2.5 A) 0554 1749

Mains unit (desktop) 110 to 240 VAC / 24 VDC (350 mA) 0554 1748

Magnetic foot aerial (dual band) with 3 m cable, for Base withGSM module (not suitable for USA, Canada, Chile, Argentina,Mexico)

Saveris protective housing for protection from high-pressurecleaning and impact, IP 69 K suitable for wireless probes T1 /T1D / T2 / T2D

Testo fast printer with wireless infrared interface, 1 roll of ther-mal paper and 4 mignon batteries for printing out readings outon Saveris Cockpit Unit

0554 0524

0572 0200

0554 0549

Spare batteries for radio probes for operation below -10 °C (4 xEnergizer L91 Photo lithium) 0515 0572

Alarm module (optical + audible), connectable to Base alarmrelay, Ø 70 x 164 mm, 24 V AC/DC / 320 mA, permanentlight: rot, permanent tone: buzzer approx. 2.4 kHz (mains unit0554 1749 required)

SBE software, incl. USB connecting cable base-PC 0572 0180

0572 0181PROF software, incl. USB connecting cable base-PC

0572 9999ID-No. 0699 6111/1

Saveris adjustment software incl. connection cable to wirelessand Ethernet probes

CFR software, incl. Ethernet connecting cable base-PC

0572 0183

0572 0182

ISO temperature calibration certificate; temperature probe; cali-bration points -18 °C, 0 °C, +60 °C; per channel/instrument (suit-able for Saveris T1/T2)

0520 0151

Calibration certificates Order no.

Software Order no.

Power supply Order no.

Miscellaneous Order no.

DAkkS temperature calibration certificate*; temperature probe;calibration points -20 °C, 0 °C, +60 °C; per channel/instrument(suitable for Saveris T1/T2)

0520 0261

ISO humidity calibration certificate; humidity probe; calibrationpoints 11.3 % RH and 75.3 % RH at +25 °C/+77 °F; per chan-nel/instrument

0520 0076

DAkkS humidity calibration certificate*; humidity probe; calibrationpoints 11.3 % RH and 75.3 % RH at +25 °C/+77 °F; per chan-nel/instrument

0520 0246

*Successor organization of the DKD

testo Saveris™: Accessories

16

external

Probe versions with internal and external temperature sensors and with humidity sensors allow the adaptation to every application. The radio probesare available with or without a display as an option. Current measurement data, the battery status and the quality of the radio link are shown on the dis-play.

Order no.0572 1210 *

868MHz

Version without display

Version withdisplay

VersionsSaveris T1

Order no.0572 1220 *

Saveris T1 D

Order no.0572 1211 *

Saveris T2

Order no.0572 1221 *

Saveris T2 D

Order no.0572 9212 *

Saveris T3

Order no.0572 9222 *

SaverisT3D

Order no.0572 7211 *

Saveris Pt

Order no.0572 7221 *

Saveris Pt D

TC

external

TC Pt100

external

Radio probe with internal NTC Radio probe with external probe con-nection and internal NTC, door contact

2-channel radio probe with 2 external TCprobe connections (TC characteristics canbe selected)

Radio probe with 1 external Pt100 probeconnection

0.1 °C

Measuring rangeAccuracy

-35 to +50 °C± 0.4 °C (-25 to +50 °C)±0.8 °C (remaining meas. range)

Resolution

Measuring range(instrument)

Accuracy (instrument)

Resolution (instrument)

Dimensions (housing):

Oper. temp.

Probe type

Probe type

NTC

Weight

Storage temp.

Meas. cycle


Conformity with standards

Radio frequency

NTC via Mini DIN socket,Door contact connection cableincluded in delivery (1.80 m)

Connection

Battery life(Type: 4 x AA)

Display (optional)Transmission distance

Saveris T1

0.1 °C

-35 to +50 °C± 0.4 °C (-25 to +50 °C)±0.8 °C (remaining meas. range)

NTC

0.1 °C

-50 to +150 °C

± 0.2 °C (-25 to +70 °C)±0.4 °C (remaining meas.range)

NTC

Saveris T2

2 TCs via TC socket, max. diffe-rence in potential 2 V

-200 to +400 °C

TC type T

0.1 °C / TC Type S 1 °C

-195 to +1350 °C

±0.5 °C or 0.5% of reading)

TC Type K

0 to +1760 °C

TC type S-100 to +750 °C

TC Type J

IP54

Saveris T3

1 Pt100 via mini-DIN socket0.01 °C

-200 to +600 °C

at 25 °C± 0.1 °C (0 to +60 °C)±0.2 °C (-100 to +200 °C)±0.5 °C (remaining meas.range)

Pt100

IP68

Saveris Pt

Housing material

-35 to +50 °C

80 x 85 x 38 mm

approx. 240 g

Standard 15 min, can be set from 1 min up to 24 hMemory 6.000 readings

-40 to +55 °C

DIN EN 12830

Battery life 3 years at +25 °C; 3 years with Energizer L91 Photo lithium batteries for freezer applications

-20 to +50 °C

2-line LCD; 7 segments with symbolsapprox. 300 m free field at a frequency of 868 MHz, approx. 100 m free field at a frequency of 2.4 GHz

Plastic

868 MHz / 2.4 GHz

Wall holder included

°C / °F

Radio

Internalsensor

Externalprobe

81m

m

81m

m

81m

m

81m

m

The AA alkali manganese mignon batteries (0515 0414) are contained in this ordering data (excepting analog coupler). Saveris probes are delivered with a calibration protocol of the works adjustment data.Calibration certificates must be ordered separately.

* The Saveris Converter V 2.0 (order no. 0572 0218) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X For more information please contact your Testo partner.

internal

NTC

internal

NTC

testo Saveris™ components: Radio probe

17

868MHz

Version withoutdisplay

Version withdisplay

Versions

Order no.0572 6222 *

Saveris H2D

Order no.0572 6210 *

Saveris H3

Order no.0572 6220 *

Saveris H3 DOrder no.0572 6224 *

Saveris H4D

Order no.0572 3210 *

Saveris U1

Radio

% RH NTC

external

NTC% RH

internal

% RH NTC

external

0.1 °C / 0.1 °Ctd

0 - 100 %RH

±3 % RH

Humidity sen-sor

0.1 °C

Measuring range

Accuracy

-20 to +50 °C

± 0.5 °C

Resolution

Meas. range (instrument)




Oper. temp.

Probe type

Probe type

Weight

Storage temp.

Meas. cycle

Protection class IP54Radio frequency

Connection

Battery life(Type: 4 x AA)

Display (optional)Transmission distance

Saveris H2D

0.1 °C

-20 to +50 °C

± 0.5 °C

NTC

Saveris H3

1 x external humidity probeMini DIN socket

-20 to +70 �NTC

0 to +100 %RH **Humidity sensor

IP42

Saveris H4D

2/4-wire current/voltage input

Saveris U1

Housing material

85 x 100 x 38 mmapprox. 256 g

2-line LCD; 7 segments with symbolsapprox. 300 m free field at a frequency of 868 MHz, approx. 100 m free field at a frequency of 2.4 GHz


°C / °F and %RH

Internalsensor

Externalprobe

mA and V

1 channel: Current/voltage input

± 0.2 °C see probes

NTC Humidity sensor0 to +100 %RH **

0,1%/0.1 °Ctd

to 90 %RH: ±2 % RH> 90 %RH: ±3 % RH

2-wire: 4 ... 20 mA 4-wire: 0/4 ... 20mA, 0 to 1/5/10 V, load: max. 160 W at24 V DC

Current ±0.03 mA / 0.75 µAVoltage 0 to 1 V ±1.5 mV/39 µVVoltage 0 to 5 V ±7.5 mV / 0.17 mVVoltage 0 to 10 V ±15 mV / 0,34 mV±0.02% of m.v./K deviating from nominaltemperature 22 °C

fixed stump probe

Service interface Mini DIN for adjustment

approx. 85 x 100 x 38 mmapprox. 240 g

80 x 85 x 38 mmapprox. 245 g

Batery life 3 years at +25 °C; 3 years with Energizer L91 Photo lithium batteries for freezer applications

Plastic

-40 to +55 °C-20 to +50 °C

Standard 15 min, can be set from 1 min up to 24 h868 MHz / 2.4 GHz

IP54

Memory 6.000 readings

** not for continuous high-humidity applications

(no display)

0.1 °C 0,1%/0.1 °Ctd

Humidity radio probe Radio probe with 1 external humidityprobe connection

Radio probe with current/voltage input

mA V

internal

Supply: Mains unit 6.3 V DC, 2 to30 V DC max. 25 V AC

Humidity radio probe

* The Saveris Converter V 2.0 (order no. 0572 0218) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X For more information please contact your Testo partner.

The AA alkali manganese mignon batteries (0515 0414) are contained in this ordering data (excepting analog coupler). Saveris probes are delivered with a calibration protocol of the works adjustment data.Calibration certificates must be ordered separately.

testo Saveris™ components: Radio probe

18

Pt100

external

TC

externalexternal

NTC

Measuring range(instrument)




Buffer battery

Oper. temp.

Probe type

Weight

Storage temp.

Meas. cycleProtection class IP54

Connection

Display (optional)

Saveris T1E

0.1 °C

-50 to +150 °C

± 0.2 °C (-25 to +70 °C)±0.4 °C (remaining meas.range)

NTC

Saveris T4 E

4 TCs via TC socketmax. potential difference 50 V

-200 to +400 °C

TC type T

0.1 °C / TC Type S 1 °C

-195 to +1350 °C

±0.5 °C or 0.5% of reading)

TC Type K

0 to +1760 °C

TC type S-100 to +750 °C

TC Type J

Saveris Pt E

1 Pt100 via mini-DIN socket0.01 °C

-200 to +600 °C

at 25 °C± 0.1 °C (0 to +60 °C)±0.2 °C (-100 to +200 °C)±0.5 °C (remaining meas.range)

Pt100

Housing material

-20 to +60 °C

Li-ion

approx. 85 x 100 x 38 mmapprox. 220 g

2 sec to 24 h

-40 to +60 °C

2-line LCD; 7 segments with symbols

Plastic

Memory 6000 readings


°C

Externalprobe

Mini-DIN service interface for adjustment is accessible externally

Power consumption PoE Class 0 (typically ≤ 3 W)

Supply 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE

Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery.

Ethernet

1 NTC via mini-DIN socket

The existing LAN infrastructure can be used through the Ethernet probe. This allows the data transfer from the probe to the base, even over long dis-tances. Ethernet probes have a display.

Ethernet probe with external NTC probeconnection

4-channel Ethernet probe with 4 external TC probeconnections

Ethernet probe with external Pt100 probeconnection

Order no.0572 7191

Order no.0572 9194

Order no.0572 1191

Saveris Pt EWith display

Saveris T4 EWith display

Saveris T1EWith display

Versions

testo Saveris™ components: Ethernet probes

19

mA V

internal

% RH NTC

externalexternal

% RH NTC% RH NTC

external

0.1 °C

Measuring range

Accuracy

-20 to +70 �

± 0.2 °C (0 to +30 °C)±0.5 °C (remainingmeas. range)

Measuring range(instrument)Accuracy (instrument)



Oper. temp.

Probe type

Probe type

Weight

Storage temp.

Meas. cycleProtection class

Connection

Display (optional)

Saveris H1E Saveris H2 E

1 x external humidity probe Mini DIN so-cket

-20 to +70 �NTC

0 to 100 %RH*Humidity sensor

Saveris H4E Saveris U1E

Housing material

approx. 230 g

2-line LCD; 7 segments with symbolsWall holder included

°C / °F and %RH

Internalsensor

Externalprobe

mA and V

1 channel: Current/voltage input

± 0.2 °C (-20 to+70 °C)

see external probes

NTC Humidity sensor0 to 100 %RH*

0.1% / 0.1 °Ctd

to 90 %RH: ±(1 %RH+0.7 % of m.v.) at +25°C> 90 %RH: ±(1.4 %RH+0.7 % of m.v.) at +25°C

2-wire: 4 ... 20 mA 4-wire: 0/4 ... 20 mA, 0 to1/5/10V, load: max. 160 W at 24 V DC

Current ±0.03 mA / 0.75 µAVoltage 0 to 1 V ±1.5 mV / 39 µVVoltage 0 to 5 V ±7.5 mV / 0.17 mVVoltage 0 to 10 V ±15 mV / 0.34 mV±0.02% of m.v./K deviating from nominaltemperature 22 °C

1 x 2/4-wire current/voltage input

approx. 240 gapprox. 85 x 100 x 38 mm

approx. 254 g

Plastic

Sintered PTFE filter, Ø 12 mm, for aggressive media, high-humidity applications (long-term measurements), high flow velocities)

Testo saline pots for monitoring and humidity adjustment of humidity probes, 11.3% RH and 75.3% RH, incl. adapter forhumidity probe, quick check or calibration of humidity probe

Sintered caps for Saveris H1 E, H2 E and H2D Ethernet probes Order no.

0554 0755

0554 0757

0554 0756

0554 0660

Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery.*not for continuous high-humidity applications

0554 0647

0.1 °C

-20 to +70 �

± 0.2 °C (0 to +30 °C)±0.5 °C (remainingmeas. range)

NTC Humidity sensor0 to 100 %RH*

0.1% / 0.1 °Ctd

to 90 %RH: ±(1 %RH+0.7 % of m.v.) at +25°C> 90 %RH: ±(1.4 %RH+0.7 % of m.v.) at +25°C

Mini-DIN service interface for adjustment is accessible externally

Power consumption PoE Class 0 (typically ≤ 3 W)

IP54

Supply 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE

Buffer battery Li-ion

Ethernet

Humidity Ethernet probe 1% Humidity Ethernet probe 2 % Ethernet probe with external humidityprobe connection

Radio probe with current/voltage input

0.1 °C 0.1%/0.1 °Ctd

2 sec to 24 h

-20 to +60 °C

-40 to +60 °C

Memory 6.000 readings

no display

Metal protective cap, Ø 12 mm for humidity probes, for measurement at flow velocities les than 10 m/s

Cap with wire fabric filter, Ø 12 mm

Stainless steel sintered filter, pore size 100 µm, sensor protection for dusty atmospheres or higher flow velocities, for measurementin high flow velocities or contaminated air

Order no.0572 6191

Order no.0572 6192

Order no.0572 6194

Order no.0572 3190

Saveris H1 EWith display

Saveris H2 EWith display

Saveris H4EWith display

Saveris U1Eno display

Versions

testo Saveris™ components: Ethernet probes

20

Meas. range AccuracyIllustrationPlug-in probes t99 Order no.

Meas. range AccuracyIllustration t99 Order no.

The specified accuracy class of the Saveris radio and Ethernet probe is achieved using these exter-nal probes.

40 mm

Ø 6 mm

Stationary probe with stainless steel sheath, TCType K

0628 7533-50 to +205 °C Class 2* 20sec

Connection: Fixed cable 1.9 m

395 mm

20m

mPipe wrap probe with Velcro tape, for measuringtemperatures on pipes with diameters up to max.120 mm, Tmax +120°C, TC type K

0628 0020-50 to +120 °C Class 1* 90sec


Pipe wrap probe for pipe diameters from 5 - 65 mm,with exchangeable measuring head, measuringrange briefly up to +280°C, TC type K

0602 4592-60 to +130 °C Class 2* 5sec


800 mm

Ø 1.5 mm

Thermocouple with TC plug, flexible, length 800mm, fibreglass, TC Type K

0602 0644-50 to +400 °C Class 2* 5sec

1500 mm

Ø 1.5 mm


0602 0645-50 to +400 °C Class 2* 5sec

1500 mm

Ø 1.5 mm


0602 0646-50 to +250 °C Class 2* 5sec

500 mm

Ø 1.5 mm

Immersion measuring tip, flexible, TC type K 0602 5792-200 to +1000°C

Class 1* 5sec

75 mm

Ø 21 mmMagnetic probe, adhesive power approx. 10 N, withmagnets, for higher temperatures, for measurementson metal surfaces, TC type K

0602 4892-50 to +400 °C Class 2*


35 mmØ 20 mm

Magnetic probe, adhesive power approx. 20 N, withmagnets, for measurements on metal surfaces, TCtype K

0602 4792-50 to +170 °C Class 2* 150sec

Fixed cable extended

1000 mm

Ø 3 mm

Immersion measuring tip, flexible, for measure-ments in air/exhaust gases (not suitable for mea-surements in smelters

0602 5693-200 to+1300 °C

Class 1* 4sec

*Acc. to norm EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), Class 2 to -40to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K).

Robust, Pt100 stainless steel food probe (IP65)

Penetration probe Pt100 with ribbon cable,cable length 2 m, IP 54

0609 2272

0572 7001

-50 to +400 °C

-50 to +180 °C

Class A (-50 to +300 °C),Class B (rem. meas. range)

Class A

10sec

10sec

Ø 4 mm

Ø 5 mm

125 mm

60 mm

Connection: Fixed cable extendedØ 3 mm

Ø 3.6 mm

15 mm

30 mm

Robust, watertight Pt100 immersion/penetra-tion probe

0609 1273-50 to +400 °C Class A (-50 to +300 °C),Class B (rem. meas. range)

12secØ 5 mm

114 mm

Fixed cable extendedØ 3.7 mm

50 mm

Ø 3.6 mm

30 mm

Plug-in probes

TC

115 mm

60 mm

Ø 4 mm

Ø 5 mm

Robust air probe, TC Type K

Penetration probe TC with ribbon cable, Type K,cable length 2 m, IP 54

0602 1793

0572 9001

-60 to +400 °C

-40 to + 220 °C

Class 2*

Class 1

25sec

7sec


Connection cable for unlimited Pt100 stationary probes with screw terminals (4-wire technology) 0554 0213

Pt100

testo Saveris™ accessories: External temperature probes

21

Meas. range Probe accuracyIllustration t99 Order no.

35 mm

Ø 3 mm

Stump probe, IP 54 0628 7510-20 to +70 � ± 0.2 °C (-20 to +40 °C)±0.4 °C (+40.1 to +70 °C)

15sec

40 mm

Ø 6 mm

Stationary probe with aluminium sleeve, IP 65 0628 7503*-30 to +90 °C ± 0.2 °C (0 to +70 °C)±0.5 °C (remaining meas. range)

190sec

Connection: Fixed cable; Cable length: 2.4 m

40 mm

Ø 3 mm Ø 3 mm

Accurate immersion/penetration probe, cablelength 6 m, IP 67

0610 1725*-35 to +80 °C ± 0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)

5sec

Connection: Fixed cable; Cable length: 6 m

40 mm

60 mm

Ø 3 mm

Ø 5 mm

Ø 3 mm

Ø 3.6 mm

30 mm

Accurate immersion/penetration probe, cablelength 1,5 m, IP 67

Penetration probe NTC with ribbon cable,cable length 2 m, IP 54

0628 0006*

0572 1001

-35 to +80 °C

-40 to +125 °C

± 0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)

±0.5 % of reading (+100 to +125 °C)±0.2 °C (-25 to +80 °C)±0.4 °C (remaining meas. range)

5sec

8sec


Wall surface temperature probe, e. g. for proof ofstructural damage in buildings

0628 7507-50 to +80 °C ± 0.2 °C (0 to +70 °C) 20sec

Connection: Fixed cable; Cable length: 3 m

300 mm

30m

m

Pipe wrap probe with Velcro tape for pipe diame-ters of up to max. 75 mm, Tmax. +75°C, NTC

0613 4611-50 to +70 � ± 0.2 °C (-25 to +70 °C)±0.4 °C (-50 to -25.1 °C)


125 mm

Ø 4 mm

15 mm

Ø 3 mm

Stainless steel NTC food probe (IP65) with PUline

0613 2211*-50 to +150 °C2) ±0.5 % of reading (+100 to +150 °C)±0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)

8sec


Connection: Fixed cable extended

115 mm

Ø 5 mm

50 mm

Ø 4 mm

Watertight NTC immersion/penetration probe 0613 1212-50 to +150 °C ±0.5 % of reading (+100 to +150 °C)±0.2 °C (-25 to +74.9 °C)±0.4 °C (remaining meas. range)

10sec

Plug-in probesNTC

Meas. range AccuracyIllustration Order no.

Ø 12 mmHumidity / temperature probe 12 mm 0572 6172-20 to +70 °C,

0 to +100 %RH±0.3 °C, ±2 %RH (2 to 98%RH)

Ø 4 mmHumidity / temperature probe 4 mm 0572 61740 to +40 °C, 0 to+100 %RH

±0.3 °C, ±2 %RH (2 to 98%RH)

The specified accuracy class of the Saveris radio and Ethernet probe is achieved using theseexternal probes.

*Probe tested according to EN 12830 for suitability for the areas of transport and storage2) Long-term measuring range to +125 °C, briefly to +150 °C or +140 °C (2 minutes)

Plug-in probes% RH

testo Saveris™ accessories: External temperature and humidity probes

All testo Saveris probes are of course adjusted in the factory, as confirmedby an adjustment report. You can perform further calibrations oradjustments either yourself on site, via a service provider or in a calibrationlaboratory. The separate Saveris adjustment software is available for this.After successful adjustment, the current adjustment data is stored in theprobe. At the same time, the adjustment software and the Saverissoftware accept this data so that the adjustment histories are available.

Radio and Ethernet probes are connected to a cable via the serviceinterface for adjustment.

If you do not wish to perform your own calibration, Testo is available as aservice provider.

Saveris adjustment software incl.connection cable to wireless andEthernet probes

Order no.0572 0183

22

All components can be assembled individually by you.However, you also have the option of ordering a testo Saveris set.This can be supplemented with individual components as required.

Set / 868 MHz

Order no. 0572 0210

Set: 868 MHz, consisting of base 0572 0220, 3 NTCradio probes without display 0572 1210, mains unitfor base 0554 1096 and SBE software 0572 0180incl. USB cable

testo Saveris™ set

Adjustment

23

Testo is a manufacturer of measuring instruments and measuring systemswith a global presence, with 27 international subsidiaries andrepresentatives in numerous countries. Naturally, testo also offers you on-site service. For questions regarding testo SaverisTM, from installation toretrofitting further system components, please refer to your competentcontact in your country.

You can find an overview of the nearest service location atwww.testo.com

Service

Devices & Hardware

Testo - Saveris Wireless Temperature and Humidity Monitoring System