View
124
Download
0
Category
Preview:
Citation preview
Azeus Machinery Co.ltd
Email: info@biopelletmachine.comWebsite: www.biopelletmachine.com
1t/h EFB Pellet Plant
Keywords: EFB pellets mill, EFB pellets machine, EFB pellets line,
biopellet machine,biopellet plant,pellet plant design
1T/h EFB pellet Plant Introduction
If you are planning to build your own EFB pellets plant, we strongly
recommend that you choose this production line, since this is the most
popular EFB pellet production configuration. This 1T/h EFB pellet
production line has compact structure, so it is easy to operate and of high
performance. Besides, the key parts adopt high quality alloy steel adds
wear-resisting material, prolong service life of 5 to 7 times, greatly
reduce your production cost and expenses.
Specification for EFB Pellet
★Moisture < 12%
★ Ash Content = 5%
★ Volatile Material = 75%
★ Carbon Content = 13%
★ Heat Energy = 4000 kcal/kg
Main Application for EFB Pellet
☞ Power Plant
☞ Boiler
☞ House Hold BBQ Rack
☞ Centralize Steam boiler
Features of 1t/h EFB Pellet Production Line
★ This EFB pellets production line can perfectly solve the tricky
problem of EFB being material with long and hard fiber and high
moisture content for pelletizing.
★ The equipment can be strictly set and customized.
★ With consecutive and reasonable process routing, each standalone
machine is of high efficiency and low power consumption.
★ Electric control system makes the operation of whole production line
much easier.
For 1t/h EFB Pellet Plant, we Equip the Following Machines
1.AZS-G313D EFB Shredder
This empty fruit bunch shredder is a drum-type machine to improve the
used EFB utilization rate, and it can process the EFB into fiber status,
mainly used for the massive EFB that is not easy to process for its hard
fiber texture.
2. Rotray Drum Dryer for EFB Fiber
The best moisture content to pelletizing is about 13-15%, while the
moisture content in EFB is about 50%~60%, so drying process is
necessary before making into renewable pellets to meet the energy
demand of industries. Our Rotary Dryer is specially designed for drying
EFB material, which can realize to reduce the moisture from 60% to 10%
one time in large scale. Besides, its stove is fueled by sawdust, wasted
wood, coal, which can save electricity consumption largely.
3. AZS-CF1000 EFB Fiber Crushing Machine
EFB fiber crushing machine is technically applied to crush the EFB fiber
into small pieces for pelletizing process. Usually this machine can be
combined with the EFB shredder machine. The materials for processing
is delivered by conveying belt; equipped with high-intensity magnetic
separator to sieve metals to avoid damaging the cutter, and safety
vertical-roller to avoid hand injury.
4.MZLH420 EFB Pellet Mill
MZLH Wood Ring Die Pellet Mill is the most suitable for compressing
high density biomass materials such as hardwood, palm fiber and EFB
(empty fruit bunch).It has the following features
A. Main drive adopts high accurate gear drive, with an output of about
20% higher than belt drive.
B. Special design of feed conditioner adopts the frequency-conversion
speed regulating control to guarantee EFB pellets quality.
C. The international advanced compensation type flexible coupling is of
novel and compact structure, safety, low noise and less trouble.
5. SKLN1.5 type Biopellet Cooler
After the pelletizing process, the temperature of the EFB pellet is about
60-80 degree and the moisture content about 15%, so a Cooler is needed
to reduce about 3-4% moisture, so that the EFB pellet is easy to store. In
order to satisfy the different need from different clients, we develop one
kind of new SKLN Counter flow Cooler. Obvious cooling effect, no
cooling dead angle, and the finished product temperature can be less than
3℃ to 5℃ higher of the room temperature, so this cooler is your first
choice for cooling EFB pellets. One SKLN1.5 type counter flow cooler is
included in this production line.
6. DCS-25 CS1 Pellet Packing Machine
After cooling, the packing process is necessary to protect the EFB pellet
from damp and dust. In this process, we assemble our best packing
machine to you. This packing machine adopts two weighing bodies and
high speed weighing system, can be used alternately or simultaneously,
high efficiency and flexibility.
Recommended