Upload
ajay-jassi
View
191
Download
0
Tags:
Embed Size (px)
DESCRIPTION
This is a presentation about what processes are required before installing and opening up a computer system.Images and annotations will be shown in, note this is a basic presentation. This is partf my IT coursework*
Citation preview
Preparation for Installing Hardware
Ajay Jassi
Before Installation
• It’s important for safety procedures, to be followed as it prevents risks and danger to the user and the system.• Equipment such as an antistatic mat and
wristband will simply prevent electrostatic charges between the components and the engineer. • The metal crocodile clip will be used, as
the metal is a electrical conductor which enables the two parts to react.
On a flat surface, roll and lay down an antistatic mat
Connect the antistatic wristband to the antistatic mat, using the clip.
Connect a crocodile clip to the end of the wire, so it can be connected to the pc
Unplug the pc, so it is ready to open up
Power cycle the pc, to get rid of an current electricity
Lay the pc flat on the antistatic mat and open the tower up
Put on the antistatic wristband and attach the crocodile clip inside the pc
Alternately if the antistatic wristband isn’t included with the wire, as separate wristband can be used, which is plugged into the mains.