Laser cutting machine application in the electrical industry

Laser cutting machine application in the electrical industry

The laser industry is booming, and is also widely used in the electrical industry.

Laser cutting machine mainly used for the installation of electrical equipment components for

processing of

sheet steel parts. Laser cutting, greatly improve product quality, reduce production costs, reduce

labor intensity,

improve the traditional plate processing technology, and receive better benefits.

Laser cutting machine has the following advantages:

1. The laser cutting machine is to use a laser which has a high power and density characteristics to

do the

processing energy. The single mode laser beam was greatly increased through focused power

density.

Because the focused spot diameter is small that the cutting accuracy is higher than relative other

traditional cutting machine.

2. Traditional blanking, cutting angle, openings and trimming process is relatively backward,

directly affect the product quality and production costs.

3. Traditional punch processing requires a lot of molds, electrical parts hole size and shapes,

one-piece and a particularly large number of non-standard products.

The mold of the high cost, long production cycle, is not conducive to a single piece, and the

production of non-standard parts.

4 using portable curve sawing opening, not only cutting of poor quality,

the dimensional accuracy is difficult to control, and high labor intensity, noise,

and low production efficiency, and low efficiency of the production of road consuming multi Saw.

In addition to the electrical industry, laser cutting machine are also widely used in other industries,

such as:

advertising production industry, sheet metal processing industry, machining industry, stainless

steel decoration

industry, handicraft industry, automobile manufacturing and so on.

www.pylaser.com