Embed Size (px)
DESCRIPTION
Bronswerk Heat Transfer was present on the 20th International Energy & Environment Fair in Istanbul 24th - 26th of April 2014. This content is about energy efficiency and smart energy management for the rapidly growing Turkish energy market. Enjoy reading and feel free to contact us!
Citation preview
ICCI 2014 FACS - 26/4/2014
Dynamic Heat Exchange SolutionsEnergy efficiency in the Turkish energy sector – the
effect of using innovative heat transfer solutions
Femke Schaëfer-Wering
Istanbul – April 26th , 2014
ICCI 2014 FACS - 26/4/2014
Topics:
• Short introduction to Bronswerk Heat Transfer®
• Why is energy efficiency improvement important?
• Improvement area’s for energy efficiency
• Solutions
ICCI 2014 FACS - 26/4/2014
Introduction
ICCI 2014 FACS - 26/4/2014
ICCI 2014 FACS - 26/4/2014
Our markets:
Sustainability Service & Maintenance
Power
Oil
Gas
Chemical
Air Handling
Food Processing
ICCI 2014 FACS - 26/4/2014
ICCI 2014 FACS - 26/4/2014
ICCI 2014 FACS - 26/4/2014
What we do:
• Thermal designs:
based on:
Aspen/HTFS
HTRI
HEI
Computational Fluid Dynamics
Hysys
ICCI 2014 FACS - 26/4/2014
What we do:
• Mechanical designs:
- ASME
- EN13445
- AD2000
- RTOD
- PD5500
- CODAP
- GOST
FEM analysis
ICCI 2014 FACS - 26/4/2014
What we do :
• Process design:
Process optimization
ICCI 2014 FACS - 26/4/2014
What we do :
• Equipment:
Heat exchangers
Air cooled coolers
And other process
equipment
ICCI 2014 FACS - 26/4/2014
What we do :
• Materials:
Titanium
(Super)Duplex
Nickel-Alloy
Inconel
Other exotics
ICCI 2014 FACS - 26/4/2014
What we do :
• Systems:
Incl. controls
ICCI 2014 FACS - 26/4/2014
What we do :
• Site work: Erection Assembly Start up Commissioning Service
ICCI 2014 FACS - 26/4/2014
What we do :
• Service & Maintenance: Upgrading Debottlenecking Inspection Specialist
maintenance for machines operating hazardous materials
ICCI 2014 FACS - 26/4/2014
Our focus on innovation:
• Product development
• System solutions
• New technology
ICCI 2014 FACS - 26/4/2014
Why is energy efficiency improvement important?
Two factors
ICCI 2014 FACS - 26/4/2014
ICCI 2014 FACS - 26/4/2014
Factor one: 20/20/20 targets for 2020 EU members
Turkey is candidate for EU-membership
20/20/20 targets for 2020
If Turkey becomes a member of the EU they are facing these targets
too
Emission of greenhouse gases
reduced by 20% compared to 1990
Energy efficiency
increased by 20%
20% of the energy needs to be
generated sustainably
ICCI 2014 FACS - 26/4/2014
Factor two: current status of Turkey
Growing population, economic growth, infrastructure lacking behind
Current population in
Turkey: over 76 million
Expectation for 2050
growth until: 93 million
Expectation for 2075 slow
down to: 89 million
ICCI 2014 FACS - 26/4/2014
Factor two: current status of Turkey
Growing population, economic growth, infrastructure lacking behind
Current population in
Turkey: over 76 million
Expectation for 2050
growth until: 93 million
Expectation for 2075 slow
down to: 89 million
Turkey currently: 15th
economy in the world,
Fastest growing - growth in
2013: 4,4%
Expectation for 2050: 9th
economy in the world
ICCI 2014 FACS - 26/4/2014
Factor two: current status of Turkey
Growing population, economic growth, infrastructure lacking behind
Current population in
Turkey: over 76 million
Expectation for 2050
growth until: 93 million
Expectation for 2075 slow
down to: 89 million
Turkey currently: 15th
economy in the world,
Fastest growing - growth in
2013: 4,4%
Expectation for 2050: 9th
economy in the world
30% of energy imported
Wants to become self-sufficient:
Nuclear, geothermal, hydro, coal
and waste to energy
Patriotic duty to produce more
energy and reduce energy
consumption
Turkey Electricity Production Map
ICCI 2014 FACS - 26/4/2014
Turkey Electricity Installed Power Chart
ICCI 2014 FACS - 26/4/2014
Installed power capacity : 61.422 MW (30.09.2013)
Expected power increase : 50.000 MW (end of 2020)
TOTAL : 111.422 MW (end of 2020)
Area’s for improvement
ICCI 2014 FACS - 26/4/2014
One: Newbuilds
Start at the design: reducing energy consumption of process equipment
Fans of the air cooled coolers,
condensers & combustion blowers
Pumps
Our high efficiency fans reduce
energy consumption by 50%
Our high efficiency pumps
reduce energy consumption
by 20-40%
ICCI 2014 FACS - 26/4/2014
Two: Upgrading of Installation
High efficiency fans & pumps: increase plant capacity and efficiency
Approx. 200 kW per condenser
Approx. 600 kW combustion
blowers
Approx. 1000 kW pumps
Use these kW’s more efficiently
Increasing output
ICCI 2014 FACS - 26/4/2014
Overall Plant Performance
Improve plant efficiency; increasing the overall efficiency by 6%
The plant efficiency is approx. 30-40%
2% is used for fans of the
condenser
6% is used for the fans of the
combustion blowers
Saving 50% on fan power
10% is used for pumps
Saving 20% on pumping power
Increase overall efficiency by 6%
ICCI 2014 FACS - 26/4/2014
Solutions
High efficiency cooling
ICCI 2014 FACS - 26/4/2014
Current situation:
Huge plot space requirement
High power consumption for air coolers &
combustion blowers
Big influence on CAPEX & OPEX
High efficiency cooling
ICCI 2014 FACS - 26/4/2014
High efficiency cooling
New fan design based on
aerospace technology:
the Whizz-Wheel®
Intensified heat transfer
Over 50% reduction in
power consumption
OR
Over 30% plot space
reduction
ICCI 2014 FACS - 26/4/2014
Benefits;
Size reduction: 30 %
Power consump. red.: 50% =
500 kW
Opex savings: € 320.000,-
/ yr
In 10 years: € 3.200.000,-
Noise reduction: 7 dB(A) Figure 3: comparative
Figure 2: high efficiency designFigure 1: standard design
High efficiency cooling
ICCI 2014 FACS - 26/4/2014
Debottlenecking & Increasing output
ICCI 2014 FACS - 26/4/2014
Increasing output
35% more cooling air
10-15% more production output
€ 700 million gas production
€ 70 million additional
Debottlenecking investment: € 5,5 million
ICCI 2014 FACS - 26/4/2014
Increasing output
Restrictions:
Maximum noise level
Production capacity
down to 60%
Results:
Elimination of all
noise issues
Production up to
100%
Bonus:
56% savings in
energy consumption
ICCI 2014 FACS - 26/4/2014
Increasing output
Restrictions:
Lower noise level or
plant shut down!
Results:
Elimination of all
noise issues
Bonus:
53% savings in
energy consumption
ICCI 2014 FACS - 26/4/2014
Compressors/turbines
ICCI 2014 FACS - 26/4/2014
Energy recovery from gas reduction
• Several hundreds of millions m3
pressurized gas in pipelines
• Gas at 20-80 Bar
• Increase or decrease pressure
before entering the gasturbine
Global Refining Summit 2014 FACS - 31/3/2014
Global Refining Summit 2014 FACS - 31/3/2014
Energy recovery from gas reduction
Radiax ®compressor/turbine
Global Refining Summit 2014 FACS - 31/3/2014
Global Refining Summit 2014 FACS - 31/3/2014
Radiax®compressor/turbine
Summary
Turkey needs power
Turkey needs energy efficiency
There are two area’s for improvement: Start at the design Upgrading the installation Resulting in: Overall improved plant performance
Bronswerk can help in three ways: High efficiency cooling Debottlenecking Compressors/turbines
ICCI 2014 FACS - 26/4/2014
Summary
Yes, Bronswerk Heat Transfer can help your power plant become more energy efficient and profitable at the same time:
High efficiency
cooling
Debottlenecking Compressors/turbines
Power consumption
reduction over 50%
Elimination of all
noise issues
Energy recovery of lost
Size reduction up to
30 %
Improved production
production capacity
capacity > 100%
Size reduction up to
80%
Noise reduction:
7 dB(A)
Bonus: savings in
energy consumption
consumption
ICCI 2014 FACS - 26/4/2014
Thank you for your attention.Questions please
ICCI 2014 FACS - 26/4/2014
How to contact us:
www.bronswerk.com
facebook.com/bronswerk
Linkedin.com/company/bronswerk-heat-transfer
twitter.com/bronswerk
And come visit our booth in hall 10 number: A 107
ICCI 2014 FACS - 26/4/2014
