Upload
broadside-interactive
View
51.166
Download
0
Embed Size (px)
Citation preview
Fitting the LEE Filters SW150 Holder
to the Nikon 14-24mm Lens
Remove Lens
To fix the SW150 mounting
collar, the lens must be off
the camera.
1
Attach Front Ring
Place the front ring over the lens shade, with the
small lugs furthest from the lens body. The ring
should locate into the correct position.
2
1. 2. 3. 4.
Invert Lens
Invert the lens keeping the
front ring in place with your
fingertips.
3
Attach Compression Ring
Introduce the compression ring from the rear of
the lens, with the arrow facing downwards,
towards the front.
4
1. 2. 3.
Place the Locking Ring
Place the locking ring, from the lens rear again,
into position over the compression ring.
Ensure the flange is
facing upwards,
toward the rear
of the lens.
5
Screw the Locking Ring
Screw the locking ring
into the front ring in a
clockwise rotation
until tight. The collar
is now fixed in place.
6
Attach the SW150 Holder
The SW150 holder slips
easily over the holder.
Tighten the locking
screw to fix the holder
firmly in place on the
collar. The holder will
still rotate.
7