Biological protection Abris. Catalog abris rz (english)

Biologicalprotection

www.zgm.ruwww.zgm.ru

Made in Russiaооо

Made in Russia

Radiation protective materials Abris RP®

®Biological protection Abris

PurposeClassification

PropertiesApplication technology


Purposes of radiation protective materials®Abris RP

1.Protection of buildings and structures from ionizing radiation

2. Protection of radiation equipment for medical and industrial purposes


Wide choice ofradiation protective materials Abris RP®

®Abris RP rubber

®Abris RP tape

®Abris RP cord

®Mastic Abris RP

®Abris RP barite panel ®Abris RP industrial panel®Abris RP polimeric parts


®Properties of Abris materials

radiation-protectiveve properties;

water-insulating properties ;

vapour-insulating properties;

resistance to action of aggressive media

(solutions of salts, weak acids and

concentrated alkalis);

fungus resistance;

high physical stability.


® Classification of materials Abris RPby the appearance and type of binder

PartsCombined

parts

Tapes Cords

Abris ® RP

Mastic

Types of materials: Self-adhesive; Non-self-adhesive, under a mechanical fastener; Termoplastic; Rubber-like; Paste-like.


® Classification of materials Abris RPby filler types

Abris ® RP

Filler -

barite

01

Filler -

lead

02

Prospectivefillers:Tungsten,

tin, boron, polyethylene

at alias


Forms and standard sizes of products

®Materials Abris RP are produced as:

a set of details of the required thickness, width and lengths;tapes in rolls;cords in rolls and pieces.

№ Geometrical sizes *

Abris ® RP Abris ® RP cord Abris ® RP parts

1 Width, mm 10,0 - 250 - up to 500

2 Length, m up to 60 up to 60 up to 1

3 Thickness,mm 2-12 - 2-30

4 Diameter, mm - 5- 40 -

* in coordination with the producer

tape


Physico-mechanical properties

Lead equivalent, Pb eq , mm from 0,25 and higher

Adhesion to metal, kilogram-force/sm ≥ 400

Adhesion to concrete, МПа ≥ 0,1

Flexibility at (20 ±5) оС, the radius of curvature of the beam15 mm

The absence of cracks and breaks

Water absorption , 24 h, %, not more 0,2

Density, g/sm3 2,1 – 3,9 and higher

Сhemical resistance inert material

Operating temperature, °С from - 40 до +70 and higher


®Application area of materials Abris RP

Nuclear power industry

portable radiation-protective shields;radiation protective casings for the equipment;protection of storages of radioactive waste;installation of the equipment, regeneration, conclusion from operation;protection of underground constructions against influence of radioactive environments.

Medicine

means of collective protection;means of individual protection;medical X-ray engineering;radiodiagnosis.

Construction

Radiation protection of buildings and constructions of industrial and medical function.


®The technology of radiation protection Abris

a set of details put layer-by-layer at each other, which are stuck together due to self-adhesive properties of modification;due to mechanical fastening;by fusing of details at temperature of 60-70 °C.

The required thickness of a sheeting is provided by:

Scheme of standard design protection ®

on the base of materials Abris RP

1. building construction;®2. primer Abris ;

®3. material Abris RP;4. false-wall (to the discretion of the customer).1 2 3

4


Technology of installation of interior coating®by self-adhesive radiation-protective material Abris RP

(self-adhering detail)

Sef-adhering detail Abris ® - to apply on the cleared, primed surface, having removed anti-adhesive film on one side.

Stitch down detail with the stitching roller for the remaining anti-adhesive layer, and then remove the release film.

To lay self-adhesive cord Abris on the edges of details.®

Similarly apply the subsequent parts, avoiding gaps.

Flatten the cord at the joint parts using a stitching roller. .To start mounting of a false-wall and finishing works directly after completion of isolation operations.


Thermoplastic detail - Apply on the cleared surface, without

priming and fix mechanically by anchor bolts

or metal dowels with the use of washers with a minimum diameter of 50 mm.

Flatten the cord at the joint parts using a stitching roller.

Technology of installation of interior coating®by termoplastic radiation-protective material Abris RP (thermoplastic_

Lay the cord Abris RP along the edge after fixing the first part to the lining next®

Start mounting of a false-wall and finishing works directly after completion of isolation operations.


®Barite panels Abris

Barite panel is designed to protect building structures against ionizing radiation as walls, ceilings, doors, for installation of frame partitions.

Barite panels represent the combined details consisting of the barite radiation protective material Abris® and construction and finishing material (metal, plastic, etc.). The lead equivalent is regulated by thickness of a radiation protective part and is in the range of 0,5 - 5 mm of Pb.

Barite panelsTechnology of fastening

of barite panels


Technology of installation of coating of the interior ®by barite panels Abris

Metal profiles and brackets for drywall are used for installation of radiation protective details.

Details can be mounted both transversely and longitudinally, system mounting items are used for fastening panels to the frame.

At facing of walls barite panels, each panel is laid with the tape Abris , then in a joint the following panel is mounted.

® ,

The surface of panels is suitable under various finishing: facing by a ceramic tile, coloring, decorative plaster.


Industry

Nuclear power engineeringRadiochemical industry

Uranium industryStorage of radioactive waste


Scope of technology of radiation protection by the materials Abris® RP on objects of nuclear power

Production of portable radiation protective screens for protection of personnel of the atomic power stations;

the device of engineering barriers as material of biological protection with radiation protective, vapor- and water insulating properties;

production of the shielding materials;

construction of burial grounds and special storages;

protection of building constructions (concrete, metal, etc.):

the bases, roof and the protecting designs of objects,

conduits of cooling systems,

cooling ponds of storages of waste,

open hydraulic engineering constructions, etc.


The weakening of the gamma radiation*

The weakening of the neutron flux*

* results of research of the Federal University of a name of Yeltsin** the thickness of the protection 17mm

the gamma radiation source

The coefficient of linear attenuation, 1/sm

L, мм Абрис® RP Pb Fe Al Бетон Вода

Cs-137 (0,661 МэВ) 17 0,12 1,19 0,57 0,2 0,17 0,09

Am-241 (60 кэВ) 17 3,76 40 9,4 0,6 0,5 0,1

the neutron sourceLength relaxation, sm

Abris ® RP** polythene plexiglas

thermal neutrons (Pu-Be) 3 7,5 7,3

Fast neutrons (Pu-Be) 9 7,5 7,3


®Radiation protective mats Abris

Radiation protective mats Abris® are used as a portable means of personnel protection at radiation hazardous objects from the effects of ionizing radiation. Used in nuclear power plants and other industrial facilities.

Operating temperature from -10°C to +80°C (relative humidity up to 90%) in normal operation and in case of violation of conditions of normal operation of nuclear power plants..


Technical characteristics ®of radiation protective materials Abris

Name of the indicator

Product type

mat

Abris ®-1

mat

Abris ®-2

light mat

Абрис®-1(L)

light mat

Абрис®-2(L)

Attenuation coefficientof gamma radiation-

of radionuclide Cs-137, not

less

1,48 1,41

The minimum permissible

bending radius

when folded, mm, not less

15

Product size, mm 1620x420х1 3 1170х570х1 3 1620x420х1 3 170х570х1 3

Weight, kg 28 + 2 20 + 2


®Radiation protective mastic Abris RP

1

2

3

Mastic Abris ® RP — plasto-elastic polymeric composite material filled with special things. The mastic is intended for radiation protection against ionizing radiation in the problem areas (joints, utilities, cable glands, etc.). Is applied with a spatula or manually by pressing the material in hard to reach placesодоступные места.

1. Output communications.

2. Slot-hole openings.

3. Movement joint.®

4. Mastic Abris RP.

Advantagesthe ability to change the thickness of the protective coating depending on the size of lead equivalent; convenience in protection of difficult surfaces due to the plasto-elastic and adhesive properties of the material; wide operating temperature range; chemical resistance to aggressive environments, including to sea water;

anticorrosion protection; gas and water vapour barrier; short installation time, reduce the cost works;

the possibility of manufacturing the putty according to the requirements of the customer.


Multilayered radiation protective panel®with materials Abris RP

Radiation-shielding panel is designed for use in industry, research institutes, testing centers and laboratories that use radiation sources of high power and need protection with lead equivalent from 5 to 15 mm Pb.

Radiation-shielding panel is a multilayered structure, reinforced with thermoplastic material Abris® . Detail is covered with metal sheets in external pasrties.


Radiation protective isolation wards ®on the base of panels Abris RP

The RP panels are used for walls, as well as the frame structures in the construction of radiation-protective isolation wards. The principle of protection is based on the construction of the metal frame and the subsequent fixing thereto RP panels.

The technology allows to produce pre-fabricated constructions directly at the place of use of radiation source. In one area you can build some radiation-protective isolation wards for each source of radiation taking into account its intensity, which significantly saves money on defense.

The ability to control the efficiency of protection by layer-by-layer connection radiation protective panels Abris® RP.

Advantages of technologies:


Currently, our plant is ready for commercial production with the following characteristics:

* material with a high content of functional filler;**combined detail with internal reinforcing.

№

п/пName of the material

The energy of-gamma radiation,

МэВ

The rate of

attenuation of

gamma - radiation

Value of

lead

equivalent,

мм Pb

1 Detail Abris ® -

500х500х15 (based)

0,661 1,7 4

2 Detail Abris ® -

500х500х15*

0,661 2,5 7

3 Detail Abris ® -

500х500х10*

0,661 1,97 5

4 Material Abris ® -

500х500х16**

0,661 2,75 8,5


Sealing of melter( type "cold crucible")in technology of induction melting of radioactive waste

Application of the sealant Abris® as a sealing material of melter in conditions of constant exposure to moisture, acids, salts and corrosive gases instead of putty.

®Characteristics of cords Abris

Indicator name Characteristics of cords Abris

®

1. Colour According to customer's requirement (basic: white, grey, black)

2. 50% solution HCl resistant

at room temperature

3. 50% solition HNO3 resistant

4. 50% solution NaOH resistant

5. 50% solution Н3РО4 resistant

6. 50% раствор Н2SO4 resistant

7. Н2О resistantwhen boiling water

8.Thermostability, °С up to 160

®Abris -cord


The comparative table of properties of radiation-protective materials

* - data are provided by the manufacturer (online resource)

№ Name of thematerial

radiation energy

(Cs 137), МэВ

Thicknessmm

Weight1 m²,kg

Lead equivalent,

mm Pb

Attenuation, %

1 Abris ® RP –02 0,661 6 41,6 2,6 40

2ITW Mazel Radishield*

silicone (silicone-lead- )

0,662 9,5 38,7 3.3* 31

3

ITW Mazel Radishield*lead Polyurethane(polyurethane -

lead)

0,662 9,5 40,5 3.3* 31

4 Abrisс® RP –03 0,661 6 60,7 3.5 -

5

ITW Mazel Radishield*lead Free

(silicone –tungsten)

0,662 9,5 43,7 3.3 32


®Objects of application of materials Abris RP

Industrial objects:• national research center "Kurchatov Institute»;• enterprises of group of companies "TVEL»;• operating nuclear power station• enterprises included in the structures of Rosatom, Ukratomprom.

Health facilities:

• "polyclinic №1" administrative Department of the President; • Implant and Dencity center (Rostov-na-Donu);• Federal center of traumatologie and orthopedics ( Barnaul);• Clinic of the Center for molecular diagnostics (Irkutsk);• Republican clinical hospital №4 (Saransk);• Hospital and clinic of Shikotan island (Yuzhno-Sakhalinsk);-• Private dental clinics in Moscow, St. Petersburg and other Russian cities.-

All materials have been certified in the leading centers of Russia.


diplomas

www.zgm.ru

P.O.B.97, 1058 Mendeleev str., Dzerzhinsk, Nizhny Novgorod region, Russiatel./fax +7(8313) 27-50-78, 27-55-87, (831) 2600-316

e-mail: [email protected]

www.youtube.com/zgmvideo www.twitter.com/ooo_zgm

SealingMaterialsPlant

For more information please contact the specialists of the plant.