2011 Sales Program

Channel Islands Surfboards

SEMI - PRO

Designed by Kelly on the computer by taking his favorite aspects of the Tangent and Proton and to produce his go-to board on the 2010 ASP tour.

Kelly designed the Semi Pro as an all-around shortboard to be ridden shorter than usual. Kelly likes to ride them with his normal dims but the same height as himself; 5’9”. This shorter rail allows for his tight signature arcs in the pocket. Deep single concave make the board work best on rail, and a good amount of rocker allow for deep gouging carves. Available with your choice of 3 or 5 fin plugs.

Size: Waist to Well OverheadSkill: Novice to Advanced

MOTORBOATRob Machado wanted to bridge the gap between his Biscuit and Gravy, the Motorboat does that. Low entry rocker along with single to double concave with vee make this board really motor. Super fast and fun in flat faced waves, the Motorboat blends performance and volume into the ideal small to medium wave performance board. Should be ridden approx. 4 inches smaller than your shortboard.

Motorboats are built with either “Greenfoam” or recycled EPS, UV cure resins, and bamboo or recycled fins, as Rob also wanted to make the Motorboat less impactful on the environment. A limited run of 75 boards signed by Rob are planned to have foam waste combined with concrete for water fountains commissioned by Rob’s foundation for schools.

Size: Knee to slightly overhead; Skill: Novice to advanced

CHEESE STICKWe worked with Yadin Nicol to completely redesign his magic MBMs and create the Cheese Stick.

Top level surfers are trending to shorter boards with wider nose and tail, which allows the Cheese Stick to be ridden shorter but keep paddling volume. The Cheese Stick also has more flip in the nose and tail than its now distant MBM cousin.

Yadin says the tail flip gets him one more maneuver per wave and makes it easier to land reverse.

Size: Knee to Slightly OverheadSkill: Intermediate to Expert

WARP

CI team rider and 1978 world champ Shaun Tomson came to us wanting to design a board more for the middle aged guy who still wants a performance board, but wants to get the most out of the average waves they find themselves riding.

The result is the Warp. This board features more volume allowing for easy paddling and wave catching. Single concave under the front foot allows for punchy drive on takeoffs and double concave to vee provide for lift and east rail to rail transitions.

Available as a swallow or round tail. Ride the Warp about the same length as your Flyer. Size: Knee to overhead; Skill: Intermediate to advanced.

REMIXDesigned with Dusty Payne, the Re-Mix is a result of the world’s best surfers going shorter with wider nose and tail dims on their boards.

Based off the Rookie, this design re-mixed the out line to make an all-around solid shortboard to be ridden an inch shorter than the board you rode last year and 1/8” wider.

Size: Knee to Slightly OverheadSkill: Intermediate to Expert

PROTON STEP-UP

Now the most common step-up in use with the CI team.

With the Proton’s pronounced rocker it was a natural choice for team in steep faces and on-rail surfing. Single concave gives the board plenty of drive for critical situations.

Size: Head High & UpSkill: Intermediate to Expert

Section – 4Stock Model Dimensions

STANDARD SURFBOARD DIMENSIONS 2011

Tier 1 - SLATER

• Semi Pro

Standard Kelly’s choice is to ride the same as your height per dims below (expert only)

- 5’7 x 18 1/8 x 2 1/8 5’8 x 18 1/8 x 2 5’8 x 18 ¼ x 2 3/16 5’9 x 18 1/8 x 2 5’9 x 18 ¼ x 2 ¼ 5’10 x 18 ¼ x 2 1/16 5’10 x 18 ½ x 2 ¼ 5’11 x 18 ¼ x 2 1/8 5’11 x 18 ¾ x 2 ¼ 6’0 x 18 3/8 x 2 3/16 6’0 x 18 7/8 x 2 5/16 6’1 x 18 5/8 x 2 ¼ 6’1 x 19 1/8 x 2 3/8 6’2 x 18 7’8 x 2 5/16 6’2 x 19 ¼ x 2 7/16 6’3 x 19 1/8 x 2 3/8 6’3 x 19 5/8 x 2 ½ 6’4 x 19 ¼ x 2 7/16 6’4 x 19 ¾ x 2 5/8 6’5 x 19 ½ x 2 ½ 6’5 x 19 7/8 x 2 5/8 6’6 x 19 ¾ x 2 5/8 6’6 x 20 x 2 ¾ 6’8 x 20 ¼ x 2 ¾ - 6’10 x 20 3/4 x 2 7/8 - 7’0 x 21 x 2 7/8 - 7’2 x 21 ¼ x 2 7/8 -

• Whip Standard Standard Plus 5’6 x 18 1/8 x 2 1/8 5'6 x 18 ¼ x 2 1/8 5’8 x 18 3/8 x 2 1/8 5'8 x 18 3/8 x 2 ¼ 5’10 x 18 ¾ x 2 ¼ 5'10 x 18 7/8 x 2 5/16 5’11 x 18 7/8 x 2 ¼ 5’11 x 18 7/8 x 2 5/16 6’0 x 19 x 2 3/8 6’0 x 19 1/8 x 2 3/8 6’1 x 19 ¼ x 2 3/8 6’1 x 19 ¼ x 2 ½ 6’2 x 19 ½ x 2 ½ 6’2 x 19 5/8 x 2 ½ 6’3 x 19 ¾ x 2 ½ 6’3 x 19 ¾ x 2 9/16 6’4 x 19 7/8 x 2 5/8 6’4 x 20 x 2 5/8 6’5 x 20 x 2 ¾ 6’5 x 20 1/8 x 2 ¾ 6’6 x 20 ¼ x 2 ¾ 6’6 x 20 ¼ x 2 7/8 6’8 x 20 ¾ x 2 7/8 6’8 x 21 x 2 7/8 6’10 x 21 x 3 6’10 x 21 ¼ x 3 7’0 x 21 ¼ x 3 - 7’2 x 21 ½ x 3 1/8 -

• K Step Standard Standard Minus 6’2 x 18 ¼ x 2 ¼ - 6’3 x 18 ¼ x 2 ¼ - 6’4 x 18 5/8 x 2 5/16 6'4 x 18 ½ x 2 5/16 6’6 x 19 x 2 ½ 6'6 x 18 ¾ x 2 3/8 6’8 x 19 ¼ x 2 5/8 6'8 x 19 x 2 ½ 6’10 x 19 ½ x 2 5/8 6'10 x 19 ¼ x 2 ½ 7’0 x 19 ¾ x 2 ¾ 7'0 x 19 ½ x 2 5/8 7’2 x 20 ½ x 2 7/8 7'2 x 20 x 2 ¾

Tier 2 - SHORTBOARDS • Cheese Stick

Standard Standard Plus 5’8 x 18 1/8 x 2 5’8 x 18 ¼ x 2 1/16 5’9 x 18 ¼ x 2 1/8 5’9 X 18 3/8 x 2 3/16 5’10 x 18 3/8 x 2 3/16 5’10 x 18 ½ x 2 ¼ 5’11 x 18 ½ x 2 ¼ 5’11 x 18 5/8 x 2 5/16 6’0 x 18 5/8 x 2 5/16 6’0 x 18 ¾ x 2 3/8 6’1 x 18 ¾ x 2 3/8 6’1 x 18 7/8 x 2 7/16 6’2 x 19 x 2 7/16 6’2 x 19 1/8 x 2 ½ 6’3 x 19 ¼ x 2 ½ 6’3 x 19 3/8 x 2 9/16 6’4 x 19 ½ x 2 9/16 6’4 x 19 5/8 x 2 5/8 6’5 x 19 5/8 x 2 5/8 6’5 x 19 ¾ x 2 5/8 6’6 x 19 7/8 x 2 5/8 6’6 x 20 x 2 ¾ 6’8 x 20 ¼ x 2 ¾ 6’8 x 20 ½ x 2 3/4 6’10 x 20 5/8 x 2 7/8 - 7’0 x 21 x 3 - 7’2 x 21 x3 -

• Remix Standard Standard Plus 5’8 x 18 1/8 x 2 1/16 5’8 x 18 ¼ x 2 1/8 5’9 x 18 1/8 x 2 1/16 5’9 x 18 ¼ x 2 1/8 5’10 x 18 ¼ x 2 1/8 5’10 x 18 3/8 x 2 3/16 5’11 x 18 ¼ x 2 3/16 5’11 x 18 3/8 x 2 ¼ 6’0 x 18 3/8 x 2 ¼ 6’0 x 18 ½ x 2 5/16 6’1 x 18 ½ x 2 5/16 6’1 x 18 5/8 x 2 3/8 6’2 x 18 ¾ x 2 3/8 6’2 x 18 7/8 x 2 7/16 6’3 x 19 x 2 3/8 6’3 x 19 1/8 x 2 7/16 6’4 x 19 ¼ x 2 ½ 6’4 x 19 3/8 x 2 9/16 6’5 x 19 3/8 x 2 9/16 6’5 x 19 ½ x 2 5/8 6’6 x 19 ¾ x 2 5/8 6’6 x 19 7/8 x 2 5/8 6’8 x 20 x 2 ¾ 6’8 x 20 1/8 x 2 ¾ 6’10 x 20 3/8 x 2 7/8 6’10 x 20 ½ x 2 7/8 7’0 x 20 ¾ x 2 7/8 7’0 x 21 x 3 7’2 x 21 x 3 7’2 x 21 ¼ x 3

• Flyer Standard Standard Plus 5’6 x 18 1/8 x 2 1/8 5'6 x 18 ¼ x 2 1/8 5’8 x 18 3/8 x 2 1/8 5'8 x 18 3/8 x 2 ¼ 5’10 x 18 ¾ x 2 ¼ 5'10 x 18 7/8 x 2 5/16 5’11 x 18 7/8 x 2 ¼ 5’11 x 18 7/8 x 2 5/16 6’0 x 19 x 2 3/8 6’0 x 19 1/8 x 2 3/8 6’1 x 19 ¼ x 2 3/8 6’1 x 19 ¼ x 2 ½ 6’2 x 19 ½ x 2 ½ 6’2 x 19 5/8 x 2 ½ 6’3 x 19 ¾ x 2 ½ 6’3 x 19 ¾ x 2 9/16 6’4 x 19 7/8 x 2 5/8 6’4 x 20 x 2 5/8 6’5 x 20 x 2 ¾ 6’5 x 20 1/8 x 2 ¾ 6’6 x 20 ¼ x 2 ¾ 6’6 x 20 ¼ x 2 7/8 6’8 x 20 ¾ x 2 7/8 6’8 x 21 x 2 7/8 6’10 x 21 x 3 6’10 x 21 ¼ x 3 7’0 x 21 ¼ x 3 - 7’2 x 21 ½ x 3 1/8 -

• Proton, Rookie Standard Standard Minus 5’8 x 18 1/8 x 2 - 5’9 x 18 1/8 x 2 - 5’10 x 18 ¼ x 2 1/16 5’10 x 18 x 2 5’11 x 18 ¼ x 2 1/8 5’11 x 18 1/8 x 2 1/16 6’0 x 18 3/8 x 2 3/16 6’0 x 18 ¼ x 2 1/8 6’1 x 18 5/8 x 2 ¼ 6’1 x 18 3/8 x 2 3/16 6’2 x 18 7/8 x 2 5/16 6’2 x 18 5/8 x 2 ¼ 6’3 x 19 1/8 x 2 3/8 6’3 x 18 7/8 x 2 5/16 6’4 x 19 ¼ x 2 7/16 6’4 x 19 1/8 x 2 3/8 6’5 x 19 ½ x 2 ½ 6’5 x 19 ¼ x 2 7/16 6’6 x 19 ¾ x 2 5/8 6’6 x 19 ½ x 2 ½ 6’8 x 20 ¼ x 2 ¾ 6’8 x 19 7/8 x 2 5/8 6’10 x 20 ¾ x 2 7/8 6’10 x 20 ¼ x 2 ¾ 7’0 x 21 x 2 7/8 7’0 x 20 ¾ x 2 7/8 7’2 x 21 ¼ x 2 7/8 7’2 x 21 x 2 7/8

• Ft Knox Standard (w/ Round Pin) Standard Plus (w/ Squash Tail) 5’9 x 18 1/8 x 2 1/8 5’10 x 18 x 2 1/16 5’10 x 18 ¼ x 2 3/16 5’11 x 18 1/8 x 2 1/8 5'11 x 18 3/8 x 2 ¼ 6’0 x 18 ¼ x 2 3/16 6'0 x 18 ½ x 2 5/16 6’1 x 18 3/8 x 2 ¼ 6'1 x 18 ¾ x 2 3/8 6’2 x 18 5/8 x 2 5/16 6'2 x 19 x 2 7/16 6’3 x 18 7/8 x 2 3/8 6'3 x 19 ¼ x 2 ½ 6’4 x 19 1/8 x 2 7/16 6'4 x 19 3/8 x 2 5/8 6’5 x 19 ¼ x 2 ½ 6'5 x 19 5/8 x 2 5/8 6’6 x 19 ½ x 2 5/8 6'6 x 19 ¾ x 2 ¾ 6’8 x 19 7/8 x 2 ¾ 6'8 x 20 x 2 7/8 6’10 x 20 ¼ x 2 7/8 6'10 x 20 ¼ x 2 7/8 7’0 x 20 ¾ x 3 - 7’2 x 21 x 3 -

• Mach9 Standard Standard Plus 5’10 x 18 x 2 1/8 5’10 x 18 1/8 x 2 1/8 5’11 x 18 1/8 x 2 3/16 5’11 x 18 ¼ x 2 3/16 6’0 x 18 ¼ x 2 ¼ 6’0 x 18 3/8 x 2 ¼ 6’1 x 18 3/8 x 2 5/16 6’1 x 18 ½ x 2 5/16 6’2 x 18 5/8 x 2 3/8 6’2 x 18 ¾ x 2 3/8 6’3 x 18 7/8 x 2 3/8 6’3 x 19 x 2 7/16 6’4 x 19 1/8 x 2 ½ 6’4 x 19 ¼ x 2 9/16 6’5 x 19 ¼ x 2 9/16 6’5 x 19 3/8 x 2 5/8 6’6 x 19 ½ x 2 5/8 6’6 x 19 ¾ x 2 5/8 6’8 x 19 7/8 x 2 ¾ 6’8 x 20 x 2 ¾ 6’10 x 20 ¼ x 2 7/8 6’10 x 20 3/8 x 2 7/8 7’0 x 20 ¾ x 3 - 7’2 x 21 x 3 -

Tier 3 – TEAM LIGHT

• ProtonTL, RookieTL Standard Standard Minus 5’10 x 18 ¼ x 2 1/16 5’10 x 18 x 2 5’11 x 18 ¼ x 2 1/8 5’11 x 18 1/8 x 2 1/16 6’0 x 18 3/8 x 2 3/16 6’0 x 18 ¼ x 2 1/8 6’1 x 18 5/8 x 2 ¼ 6’1 x 18 3/8 x 2 3/16 6’2 x 18 7/8 x 2 5/16 6’2 x 18 5/8 x 2 ¼ 6’3 x 19 1/8 x 2 3/8 6’3 x 18 7/8 x 2 5/16

Tier 4 – SPECIALIZED

• Warp 5’9 x 19 x 2 5/16 5’11 x 19 ¼ x 2 7/16 6’1 x 19 5/8 X 2 5/8 6’3 x 20 x 2 11/16 6’5 x 20 ¼ x 2 ¾ 6’7 x 20 ½ x 2 7/8

• Dumpster Diver 5’4 x 19 x 2 1/8 5’6 x 19 ¼ x 2 ¼ 5’7 x 19 ½ x 2 5/16 5’8 x 19 ¾ x 2 3/8 5’10 x 20 x 2 ½ 6’0 x 20 ¼ x 2 5/8

• Pod

5’4 x 19 ½ x 2 ¼ 5’6 x 19 ¾ x 2 3/8 5’8 x 20 x 2 3/8 5’10 x 20 ¼ x 2 ½ 6’0 x 20 ½ x 2 ½ 6’2 x 20 ¾ x 2 5/8

• Biscuit, Fishcuit

5’2 x 19 ¾ x 2 ¾ 5’4 x 19 7/8 x 2 ¾ 5’6 x 20 x 2 ¾ 5’8 x 20 ¼ x 2 ¾ 5’10 x 20 ½ x 2 7/8 6’0 x 21 x 3 6’2 x 21 ½ x 3 6’4 x 21 ¾ x 3

• Gravy

5’3 x 19 ¼ x 2 ¼ 5’5 x 19 3/8 x 2 3/8 5’7 x 19 ½ x 2 7/16 5’9 x 19 ¾ x 2 7/16 5’11 x 20 x 2 ½ 6’1 x 20 ½ x 2 5/8 6’3 x 21 x 2 ¾ 6’5 x 21 ½ x 2 7/8

Tier 5 – MOTORBOAT

• Motorboat 5’2 x 19 1/8 x 2 1/16 5’4 x 19 ¼ x 2 ¼ 5’6 x 19 ½ x 2 3/8 5’8 x 19 ¾ x 2 ½ 5’10 x 20 x 2 5/8 6’0 x 20 ¼ x 2 ¾ 6’2 x 20 5/8 x 2 7/8 6’4 x 21 x 3

Tier 6 - HYBRIDS

• M13 Standard Standard Minus 6’8 x 20 x 2 ¾ 6'8 X 19 ¾ x 2 5/8 6’10 x 20 ¼ x 2 7/8 6’10 x 20 x 2 ¾ 7’0 x 20 ½ x 3 7’0 x 20 ¼ x 2 7/8 7’2 x 21 x 3 7’2 x 20 ¾ x 2 7/8 7’4 x 21 ¼ x 3 7’4 x 21 x 2 7/8 7’6 x 21 ½ x 3 7’6 x 21 ¼ x 2 7/8 7’8 x 21 ¾ x 3 7’8 x 21 ½ x 2 7/8 7’10 x 22 x 3 1/8 7’10 x 21 ¾ x 3 8’0 x 22 ½ x 3 1/8 8’0 x 22 ¼ x 3

• Water Hog Standard Standard Minus 7’0 x 20 ¾ x 2 5/8 7’0 x 20 ¼ x 2 5/8 7’2 x 21 x 2 5/8 7’2 x 20 ¾ x 2 5/8 7’4 x 21 ¼ x 2 ¾ 7’4 x 21 x 2 5/8 7’6 x 21 ½ x 2 ¾ 7’6 x 21 ¼ x 2 5/8 7’8 x 21 ¾ x 2 ¾ 7’8 x 21 ½ x 2 ¾ 7’10 x 21 ¾ x 2 7/8 7’10 x 21 ¾ x 2 ¾ 8’0 x 22 x 2 7/8 8’0 x 22 x 2 ¾ 8’2 x 22 x 3 8’2 x 22 x 2 7/8 8’4 x 22 ¼ x 3 8’4 x 22 ¼ x 2 7/8 8’6 x 22 ½ x 3 8’6 x 22 ½ x 2 7/8 8’11 x 22 ½ x 3 8’11 x 22 ½ x 2 7/8

Tier 7 - BLACK BEAUTY, MTFA

• Black Beauty 6’3 x 18 ¾ x 2 ½ 6’6 x 19 ¼ x 2 ¾ 6’9 x 20 ¼ x 2 7/8 7’0 x 20 ¾ x 3

• MTF-A 5’6 x 18 ½ x 2 ¼ 5’8 x 18 ¾x 2 3/8 5’10 x 19 1/8 X 2 ½ 6’0 x 19 5/8 x 2 5/8 6’2 x 20 x 2 ¾

Tier 8 - QUADS

• Whip Quad Standard Standard Plus 5’6 x 18 1/8 x 2 1/8 5'6 x 18 ¼ x 2 1/8 5’8 x 18 3/8 x 2 1/8 5'8 x 18 3/8 x 2 ¼ 5’10 x 18 ¾ x 2 ¼ 5'10 x 18 7/8 x 2 5/16 5’11 x 18 7/8 x 2 ¼ 5’11 x 18 7/8 x 2 5/16 6’0 x 19 x 2 3/8 6’0 x 19 1/8 x 2 3/8 6’1 x 19 ¼ x 2 3/8 6’1 x 19 ¼ x 2 ½ 6’2 x 19 ½ x 2 ½ 6’2 x 19 5/8 x 2 ½ 6’3 x 19 ¾ x 2 ½ 6’3 x 19 ¾ x 2 9/16 6’4 x 19 7/8 x 2 5/8 6’4 x 20 x 2 5/8 6’5 x 20 x 2 ¾ 6’5 x 20 1/8 x 2 ¾ 6’6 x 20 ¼ x 2 ¾ 6’6 x 20 ¼ x 2 7/8 6’8 x 20 ¾ x 2 7/8 6’8 x 21 x 2 7/8 6’10 x 21 x 3 6’10 x 21 ¼ x 3 7’0 x 21 ¼ x 3 - 7’2 x 21 ½ x 3 1/8 -

• Flyer Quad Standard Standard Plus 5’6 x 18 1/8 x 2 1/8 5'6 x 18 ¼ x 2 1/8 5’8 x 18 3/8 x 2 1/8 5'8 x 18 3/8 x 2 ¼ 5’10 x 18 ¾ x 2 ¼ 5'10 x 18 7/8 x 2 5/16 5’11 x 18 7/8 x 2 ¼ 5’11 x 18 7/8 x 2 5/16 6’0 x 19 x 2 3/8 6’0 x 19 1/8 x 2 3/8 6’1 x 19 ¼ x 2 3/8 6’1 x 19 ¼ x 2 ½ 6’2 x 19 ½ x 2 ½ 6’2 x 19 5/8 x 2 ½ 6’3 x 19 ¾ x 2 ½ 6’3 x 19 ¾ x 2 9/16 6’4 x 19 7/8 x 2 5/8 6’4 x 20 x 2 5/8 6’5 x 20 x 2 ¾ 6’5 x 20 1/8 x 2 ¾ 6’6 x 20 ¼ x 2 ¾ 6’6 x 20 ¼ x 2 7/8 6’8 x 20 ¾ x 2 7/8 6’8 x 21 x 2 7/8 6’10 x 21 x 3 6’10 x 21 ¼ x 3 7’0 x 21 ¼ x 3 - 7’2 x 21 ½ x 3 1/8 -

• Pod Quad 5’4 x 19 ½ x 2 ¼ 5’6 x 19 ¾ x 2 3/8 5’8 x 20 x 2 3/8 5’10 x 20 ¼ x 2 ½ 6’0 x 20 ½ x 2 ½ 6’2 x 20 ¾ x 2 5/8

Tier 9 – STEP UPS • Proton Step Up

6’2 X 18 ¼ X 2 3/16 6’6 x 18 ¾ x 2 3/8 6’8 x 19 x 2 ½ 6’10 x 19 ¼ x 2 ½ 7’0 x 19 ½ x 2 5/8 7’2 x 20 x 2 ¾