National Institute of Mechatronics Engineering

University of Engineering & Technology Peshawar

Lab Report # 06

Electronics Devices

Submitted BY

Awais Ahmad

Mechatronics Engineering

13PWMCT0293

Morning Section

3rd Semester

Submitted To

Miss Nayar Fazal

MtE-205 date: 22/01/2015

Lab Report # 06

Electronics Principles

Transistor Biasing

In this circuit we first bias the transistor linearly, and then we change the value of the VBB & VCC, we observe the change in IB, VCE, IE, IC! This circuitry is first drawn through multisim software and then simulated. The changed values of the selected parameters are measured by the millimeters. The biasing, specially the linear transistor biasing is very important and must for the amplification!

The potentio meter 1 and 2 are used as variable resistor in the above circuitry, the millimeter installed in series is for current measuring and which are in parallel are for measuring the voltage. The transistor ID here is 2N1711. There is no need to describe the other parameters of 2N1711 here!

Values

Similarly we can prove the values given in the tables given below which I have elaborate with such way, measuring it through the multimetres!