Leviton Omnibus Lighting System

leviton.com/automation

Omni-Bus Lighting Solutions

Control 110-120VAC/220-240VAC CFL, LED, Incandescent, Electronic Low Voltage, Halogen, Pumps, Shades, and More.


Save wiring and installation time with the flexible modular solution

Leviton’s Omni-Bus controls lights, shades, fans, shutters, pumps, and more. Utilizing the worldwide DIN rail standard for mounting, this bus and controller based management family controls CFL, LED, electronic low voltage, Halogen, and incandescent lighting. Each hard-wired or wireless device works in 110-120VAC/220-240VAC 50-60Hz markets unless otherwise noted. Modular Omni-Bus components can be located where needed to save wiring and installation costs.

Elegant, multi-button programmable wall switches eliminate the expense of in-wall high voltage wiring to multi-way switches. Whereas competing central lighting systems require home runs to a single central cabinet, Omni-Bus power wiring is minimized as controllers can be localized to switches and switches can be programmed to perform a number of actions.

How Does it Work? All modules in an Omni-Bus system are connected together using a low voltage Cat5 UTP bus. The electronics in each module are powered by the bus. High voltages in output modules are optically isolated from the bus. Buttons on wired or wireless wall stations can be configured to operate any Omni-Bus load or scene. Omni-Bus architecture includes low cost splitters and T-connections for ease of installation and expandability. Omni-Bus network can be star, hub and spoke, daisy chain or a combination. Splitters allow for a free topology architecture. Versatility that’s perfect for small businesses, featuring the benefits of central lighting control with the flexibility of distributed control systems.


Features and Benefitsn Global Solution

n Eco-Friendly, uses less resources like copper

n Control lighting (CFL, LED, incandescent, halogen, electronic low voltage), shades, fans, shutters, pumps, and more

n Elegant, multi-button programmable wall switches eliminate the expense of in-wall high voltage wiring to multi-way switches

n Easy to install! Modular components use Cat 5/Cat 6 and can be located where needed to save installation time and costs

n Competing systems require home runs to a single central cabinet

n Flexible open architecture works with any momentary switch interface with low voltage LED’s

n Use Omni-Bus stand-alone or integrate with Leviton automation system for apps/touchscreens and advanced programming.



Omni-Bus features free setup software available online. All modules are CE, C-Tick, SASO, FCC and UL (ETL) approved.

Use Any Momentary Contact Switch The Omni-Bus network allows for utilization of Leviton wired and wireless wall stations as well as many third party momentary contact switches. Simply connect the Universal Switch Interface Module (part number 114A00-1) to connect up to six third-party switches. Six LED outputs control two-lead bi-color or single color LED indicators for each switch. Use multiple Universal Switch Interface Modules in a job if desired.

DIN Rail Modules Explained Omni-Bus Lighting Control Modules can be utilized to control lights, shades, fans, shutters, pumps, and more. Diagnostic LED’s on the devices help with installation of nodes on the network. Standard UTP data cable is used between the devices and features up to 1000m Omni-Bus cable length.

Omni-Bus components assure properly terminated data cable for high speed data bus – no jumpers to set. The Omni-Bus network is powered by a low supply voltage (24VDC) power supply. Each module is optically isolated from the mains supply side, making modules safer for users and installers. Leviton’s modules are resistant to electrical surges and lightning.

Connect to Automation Systems For remote access, scheduling abilities, and complete automation, consider Leviton’s Omni security & automation system for total control over a home or building. Omni-Bus easily integrates into the universal system.

Cat. No. Description

110A00-1 Omni-Bus Dimmer DIN Rail Module

110A00-2 Omni-Bus Universal Dimmer DIN Rail Module

111A00-1 Omni-Bus Power Switch DIN Rail Module

112A00-1 Omni-Bus Relay DIN Rail Module

113A00-1 1-Button, Hardwired switch

113A00-2 1-Button, Wireless switch


113A00-4 2-Button, wireless switch


113A00-6 3-Button, Hardwired, Brushed Stainless switch

113A00-7 3-Button, Wireless switch


113A00-9 6-Button, Hardwired, Brushed Stainless switch

114A00-1 6-Channel Universal Switch Interface Module

114A01-1 Omni-Bus Cable Assemblies (12)

115A00-1 RF Transceiver DIN Rail Module

116A00-1 USB Programming Interface Unit

117A00-1 Interface Translator DIN Rail Module

118A00-1 DALI Gateway DIN Rail Module

Cat. No. Description

119A00-1 3-Way Splitter

120A00-1 8-Way Splitter DIN Rail Module

121A00-1 Jumper Plugs

122A00-1 Termination Plug

123A00-1 Power Supply 2.5A DIN Rail Module

124A00-1 Power Supply Interface 2A DIN Rail Module

125A00-1 Keyfob Remote Control, 6-Channel

125A00-2 Keyfob Remote Control, 16-Channel

126A00-1 Omni-Bus Scene Control DIN Rail Module

95A20-1 Single-Gang Switch Box w/Cover, Metal

00LVS-01W* 1 Button, Low-Voltage Switch, White








Ordering Information

Leviton Manufacturing Co., Inc. 201 North Service Road, Melville, NY 11747-3138 Telephone: 1-800-323-8920 • Fax: 1-800-832-9538 • Tech Line: (8:30AM-7:00PM E.T. Monday-Friday): 1-800-824-3005

Leviton Security & Automation 4330 Michoud Blvd., New Orleans, Louisiana, 70129 • Telephone: 1-504-736-9810 • Fax: 1-504-253-2954

Visit our website at www.leviton.com/automation © 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. SA-10006

* Requires usage of 114A00-1 for integration. If all 8 buttons on the LVS-8W or all 10 buttons on the LVS-10W are used, please utilize two 114A00-1 products for operation.

Engineering

Leviton Omnibus Lighting System