PowerPoint Presentation

CleanCNGTM

STANDARD MODELS Simplified ordering process, quicker delivery time and lower prices on standard equipment.CLEANER FUEL Non-lubricated compressors produce cleaner CNG which reduces maintenance, cost of operation and extends vehicle engine life.LOW VIBRATIONVibration so low, a Canadian one-dollar coin balanced on edge on the 3rd stage bottle while in operation.REDUNDANCYAvailable in multiple building block systems for efficient flexibility and mission critical redundancy.What is the CleanCNGTM?

2

Single package footprint with modular concept to build twins or tripletsEasy serviceability with sliding in and out major component (CBA, HX, Recovery tank, motor, etc.)Fits into a normal 20ft shipping containerRigid, vibration-free constructionMonocoque-type frame design approach, instead of flat platform with attached bracingsAccommodate all compressor configuration from 100-300HpOne design fits all, all standard major components and configurationDesign for manufacturingTop or side discharge possibilityReduced welded construction with bolted elementsFEA calculations

3CleanCNGTM Design

4CleanCNGTM Standard twin package

5Frame Design & AssemblyMonocoque Frame DesignEach sub-assembly built in separate cell and brought together at finalCooler Sub FrameRecovery Tank FrameCooler SectionsSkid

Monocoque is a term used in automobiles.In racing, sections of the car can be taken apart and replaced very quickly.It all bolts together.Instead of everything attaching a frame, the components attach to themselves.

6Modular Design

7Why choose the new CleanCNGTM?

Easier to access elements for easier and quicker service and inspection. Saves owner and technician timeQuicker and easier maintenance of elements that will allow for inspections that will reduce further damage, inefficiencies, and repair costs in the future

8Money and Time saving serviceability

The CleanCNG was designed with service in mind.

9Savings in ServiceabilityImproves Serviceability elements include:

360 Visual Inspection Compressor Block & Filter Access

Centralized Drain Location and Oil sight

7

Indicator Taps Head and Crank End10Savings in Serviceability Overhead Crane Interlock

11Savings in Serviceability360 degree access

Electrical & Lighting

Heat Exchanger Section Removal

8

Pressure Safety Values (PSVs) Motor Service Rail and Frame12Savings in Serviceability

Control Gas Regulator

13Savings in Serviceability

Recovery Tank Isolation Valve

Savings in Serviceability 14

Technician labor savings measured in hours and given an average value of $65 USD per hour

Operational cost savings in USD. This identifies savings due to having avoided potential service issues and costs.

Downtime savings is measured in hours and converted to an assumed lost revenue opportunity estimate at a rate of $300 USD per hour. $500,000+ in Savings

15Lowest Vibration and Noise

As the CNG market moves closer and closer to urban environments, noise is a major problem.

The CleanCNG offers less than 75 dBA (at three meters), revolutionary in the CNG Industry.

15

CleanCNG Performance VibrationLow vibration levels measured on CleanCNG builds representative performance provided below:

SUCCESFUL TESTING* ON:- GRAVEL- WITH / WITHOUT ANCHORING

*COIN TEST REPLICATED-On gravel-With subsequent buildshttps://www.youtube.com/watch?v=6V-DyST5pgo

ALL CONFIGURATIONS ARE TESTED

16

CleanCNG Performance - Noise1m3m1m1m1m3m3m3mNoise levels measured on CleanCNG, standard configuration with 250 HP using decibel meter, dBA (A-weighting), 1m height, 1 & 3m distances from package while running.

78dBA

75dBA

78dBA

74dBA

77dBA

74dBA

76dBA

71dBAACHIEVEMENT: Values below 75dBA @3mBackground

68dBA17

18Lowest Oil CarryoverNon-Lubricated Produces Quality CNG

Through the use of self-lubricating piston rings and rod packings, Clean Energy Compression boats the lowest level of oil carry-over in the industry: 5ppm or less.

This design produces the cleanest possible downstream gas, avoiding oil buildup in storage cylinders as well as ensuring cleaner combustion in the vehicle.

19

Technical Specifications

Technical Specifications20

Technical Specifications21

21

43676 Progress WayChilliwack, BC, Canada V2R 0C3Tel 604.795.9491CleanEnergyFuels.com www.CleanEnergyFuels.com/Compression

22