ABSIO16R605 Description

Protocol Converter/Multi I/O module: 104mm x 89mm foot print

• 2x RS485/RS232 ports Ethernet on board or wireless• I/O mix of 16 bit I/O 8AI/8AO• 3x 24bit differential AI with Gain (suitable for load cells/bridge inputs)• On-board protocols supported S7, Modbus TCP Server, Modbus RTU Master/Slave• Logic capable for Totalizers/PID control. Interlocks and sequencing.

This board design supports the following processor mother boards:• Amtel: Nano V3.0 ATMEGA328P, Arduino UNO, MEGA2560, and Due ARM

CORTEX M3• STMicroelectronics: STM32F411RET6 ARM Cortex-M4 NUCLEO-F411RE Module • and others including the following...

Main processors start with the smallest of units as sub assemblies like:Nano ATmega328P V3 CH340G Board 5V for ABSIO16r605

Nano ATmega328P V3 CH340G Board 5V Inserts on P-0 socket as silk screened V5 operation jumper for i2c bus power selectable.

process@BioProcessAutomation.com

Another AMTEL processor for applications requiring more memory or I/O

SainSmart Mega2560 R3 Board ATmega2560-16AU + ATMEGA16U2 USB Cable for Arduino

SainSmart Mega2560 R3 Board ATmega2560-16AU Inserts on P-1 socket as silk screened V5 operation jumper for i2c bus power selectable

process@BioProcessAutomation.com

For higher speeds and multiple communication peripherals the DUEis (the top end of the Arduino family) is supported, this requires Jumpers to be set for 3.3V operation:

ARM-based development board DUE AT91SAM3X8E CortexM3 compatible with Arduino

ARM-based development board DUE AT91SAM3X8E Cortex M3Inserts on P-1 socket as silk screened V3.3 operation jumper for i2c bus power selectable must use 3.3V select jumpers

process@BioProcessAutomation.com

And can utilize for the high end applications an ARM Cortex M4STM32F411RET6 ARM Cortex-M for NUCLEO-F411RE Module + ST-LINK/V2 (mini)

STM32F411RET6 ARM Cortex-M4 for Inserts on P-1 socket as silk screened V3.3 operation jumper for i2c bus power selectable must use 3.3V select jumpers

process@BioProcessAutomation.com

Communications boards supported Modbus RTU and ProfiBus. At sockets R0 and R-1(also supported are RS232 with DSR and CTS.)

MAX485 RS-485 Module TTL to RS-485 module Unserts on R0/1 socket as silk screened V5 operation jumper for i2c bus power selectable must use 3.3V select jumpers

process@BioProcessAutomation.com

Protocol converters available for PreSens and for YSI analyzers. MODBUS RTU, ASCII, and Profibus.

Wireless application support at socket R-0NRF24L01+ 2.4GHz Wireless RF Transceiver Module

2PCS Arduino NRF24L01+ 2.4GHz Wireless RF Transceiv...Inserts on R-0 socket as silk screened V3.3 operation jumper for SPI bus power selectable may use 3.3V select jumpers for this board may accept 5V inputs.

process@BioProcessAutomation.com

And for small footprint Ethernet applications including S7 and Modbus TCP. E-0 and E-1 sockets support.Mini W5100 LAN Ethernet Shield Network Module board PROFINET or ModbusTCP

And for small motion control systems or pump drives D-0,D-1, D-2 sockets support 3 AXIS

Multi axis Stepper Driver DRV8825 or Pololu A4988

HX711 Dual-channel 24-bit A/D Conversion PGA Sensor Module

HX711 Dual-channel 24-bit A/D Conversion or differential inputs Inserts on S-0/1/2 sockets as silk screened V3.3 or V5 operation jumper for TWI bus power selectable must use 3.3V select jumpers

process@BioProcessAutomation.com

And differential or single ended analog inputs are supported by sockets A-0 and A-11For Arduino ADS1115 Module 4 Channel 16 Bit I2C ADC With Pro Gain Amplifier

Tested with serveral industrial 24VDC two wire transmitters.

I also offer 4 channel analog output boards to use on sockets A-0 and A-1

I2C slaves include the 3 AXIS motor driver for 5A DC or 3A Steppers speed and position control protocols supported over I2c with ABSI2C4988n

This whole I/O assembly can act as remote I/O for Allen Bradley or Siemens S-7 1200,1500 or other PLC processors.