FLY-AIS958-EN-R2 Page 1 of 2

All specifi cations are non contractual and are subject to change without prior notice

1601

www.balteau.com

BALTOMATIC AIS958

BALT

OMAT

IC A

IS95

8

BALTOMATIC AIS958

Cabinet size:

Door size:

Focal spot - Flat panel:

kV max.:

mA max.:

Mains (single phase):

Frequency:

Current comsumption:

Operating temp.:

X-ray leak*:

Duty cycle:

Tubehead:

1608 x 948 x 1448 mm

505 x 505 mm

1040 mm

Up to 225 kV

Up to 50 mA

230 V

50 Hz

9 A

From 10° to 35°C

< 0,5 µSv/h

100 %

Metal-Ceramic

Available fully installed in a trailer to do inspection anywhere at anytimeMulti purpose X-ray generator is able to inspect many types of partsAvailable in different version allowing you to choose between different generators.Main switch with a removable key that avoids unauthorized people to operate the equipmentTwo emergency stop buttons (one on the shielded cabinet and one on the control unit).A large door with an aperture of 505 mm x 505 mm

Fully Automated operating system for automatic sequence restitutionSafe shielded cabinet with leakage dose rate of

FLY-AIS958-EN-R2 Page 2 of 2

All specifi cations are non contractual and are subject to change without prior notice

1601

BALTOMATIC AIS958

BALT

OMAT

IC A

IS95

8

Optional «stand» (1310 x 555 x 502) with/without doors, elevated fl oor to allow fork lift uses for transportation, movable roof for easy service, electro magnetic lock with «fail free» active function, door on hinges.

Cabinet size (L x D x H): 1608 x 948,5 x 1448,2mm

Door size (L x H):

kV maximum:

505 x 505

225 (depending on chosen equipment)

Focal spot - Flat panel distance:

mA maximum:

1040

50 (depending on chosen equipment)

mm

mA

Mains (single phase): 230V

Frequency: 50Hz

ACurrent consumption: 9

Specifi cations Units BALTOMATIC AIS958

mm

kV

Operating temperature: From 10 to 35°C

µSv/hX-ray leak @ 10 cm of the wall < 0,5 µSv/h (fully protected cabinet)

* FFD= 700mm/Film Kodak AX/D=2.0/t=10min.

High voltage range: 5 to 160 15 to 1605 to 200 5 to 160 5 to 225kV

Tube current range: 0,5 to 12 0,3 to 50,5 to 12 0,1 to 50 0,1 to 30mA

Beam angle: 60° x 40° Refer tube fl yers60° x 40° Refer tube fl yers Refer tube fl yers

Focal spot size (IEC336): 1 or 3 (EN12543) 0,2 x 0,2 to 3 x 31 or 3 (EN12543) 0,2 x 0,2 to 3 x 3 0,2 x 0,2 to 3 x 3

Maximum power: 600 or 900 400600 or 900 4000 4000W

Steel penetration (*): 34 2044 35 54mm

Working temperature: Max. 50° Max. 45°Max. 50° Max. 45° Max. 45°°C

Inherent fi ltration: 0,8 Be Refer tube fl yers0,8 Be Refer tube fl yers Refer tube fl yersmm

Anode cooling type: Air WaterAir Water Water

Duty cycle: 100 100100 100 100%

Tubehead: Metal-Ceramic Metal-CeramicMetal-Ceramic Metal-Ceramic Metal-Ceramic

Control unit: DC1 or Hand-XD RC7DC1 or Hand-XD LS1 or LS1C2 LS1 or LS1C2

Specifi cations UnitsAIS228

With CLD160AIS228

With LLX160/DAAIS228

With LLX200/DAAIS228

With XSD160AIS228

With XSD225

Contact details Distributed by:

Balteau NDTRue Voie de Liège, 12B-4681 Hermalle Sous ArgenteauBelgium

www.balteau.combalteau@balteau.comTel. +32 (0) 4 374 75 75Fax +32 (0) 4 374 75 85