Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
FLY-AIS958-EN-R2 Page 1 of 2
All specifi cations are non contractual and are subject to change without prior notice
1601
www.balteau.com
BALTOMATIC AIS958
BALT
OMAT
IC A
IS95
8
BALTOMATIC AIS958
Cabinet size:
Door size:
Focal spot - Flat panel:
kV max.:
mA max.:
Mains (single phase):
Frequency:
Current comsumption:
Operating temp.:
X-ray leak*:
Duty cycle:
Tubehead:
1608 x 948 x 1448 mm
505 x 505 mm
1040 mm
Up to 225 kV
Up to 50 mA
230 V
50 Hz
9 A
From 10° to 35°C
< 0,5 µSv/h
100 %
Metal-Ceramic
Available fully installed in a trailer to do inspection anywhere at anytimeMulti purpose X-ray generator is able to inspect many types of partsAvailable in different version allowing you to choose between different generators.Main switch with a removable key that avoids unauthorized people to operate the equipmentTwo emergency stop buttons (one on the shielded cabinet and one on the control unit).A large door with an aperture of 505 mm x 505 mm
Fully Automated operating system for automatic sequence restitutionSafe shielded cabinet with leakage dose rate of
FLY-AIS958-EN-R2 Page 2 of 2
All specifi cations are non contractual and are subject to change without prior notice
1601
BALTOMATIC AIS958
BALT
OMAT
IC A
IS95
8
Optional «stand» (1310 x 555 x 502) with/without doors, elevated fl oor to allow fork lift uses for transportation, movable roof for easy service, electro magnetic lock with «fail free» active function, door on hinges.
Cabinet size (L x D x H): 1608 x 948,5 x 1448,2mm
Door size (L x H):
kV maximum:
505 x 505
225 (depending on chosen equipment)
Focal spot - Flat panel distance:
mA maximum:
1040
50 (depending on chosen equipment)
mm
mA
Mains (single phase): 230V
Frequency: 50Hz
ACurrent consumption: 9
Specifi cations Units BALTOMATIC AIS958
mm
kV
Operating temperature: From 10 to 35°C
µSv/hX-ray leak @ 10 cm of the wall < 0,5 µSv/h (fully protected cabinet)
* FFD= 700mm/Film Kodak AX/D=2.0/t=10min.
High voltage range: 5 to 160 15 to 1605 to 200 5 to 160 5 to 225kV
Tube current range: 0,5 to 12 0,3 to 50,5 to 12 0,1 to 50 0,1 to 30mA
Beam angle: 60° x 40° Refer tube fl yers60° x 40° Refer tube fl yers Refer tube fl yers
Focal spot size (IEC336): 1 or 3 (EN12543) 0,2 x 0,2 to 3 x 31 or 3 (EN12543) 0,2 x 0,2 to 3 x 3 0,2 x 0,2 to 3 x 3
Maximum power: 600 or 900 400600 or 900 4000 4000W
Steel penetration (*): 34 2044 35 54mm
Working temperature: Max. 50° Max. 45°Max. 50° Max. 45° Max. 45°°C
Inherent fi ltration: 0,8 Be Refer tube fl yers0,8 Be Refer tube fl yers Refer tube fl yersmm
Anode cooling type: Air WaterAir Water Water
Duty cycle: 100 100100 100 100%
Tubehead: Metal-Ceramic Metal-CeramicMetal-Ceramic Metal-Ceramic Metal-Ceramic
Control unit: DC1 or Hand-XD RC7DC1 or Hand-XD LS1 or LS1C2 LS1 or LS1C2
Specifi cations UnitsAIS228
With CLD160AIS228
With LLX160/DAAIS228
With LLX200/DAAIS228
With XSD160AIS228
With XSD225
Contact details Distributed by:
Balteau NDTRue Voie de Liège, 12B-4681 Hermalle Sous ArgenteauBelgium
[email protected]. +32 (0) 4 374 75 75Fax +32 (0) 4 374 75 85