Workshop Organizer
Department of Mechanical Engineering, The Hong Kong Polytechnic University
Dec 1-3, 2018Hong Kong SAR, China
The 8th EAST ASIA MECHANICAL AND AEROSPACE ENGINEERING WORKSHOP
1
Preface
On behalf of the Organizing committee and the Department of Mechanical Engineering of the Hong Kong
Polytechnic University, I would like to extend a warm welcome to all participants of the 8th East Asia
Mechanical and Aerospace Engineering Workshop.
This workshop series has been successfully held in the previous seven years, involving the four top-notch
universities in the East Asia region from Korea, Taiwan, Japan and Hong Kong respectively. In an effort to
enhance collaborations with sister institutions in the East-Asia area, the Department of Mechanical
Engineering (ME) of the Hong Kong Polytechnic University (HKPolyU) joined this prestigious alliance
five years ago by participating in the 3rd workshop in Hokkaido University in Japan in 2013. In the following
year, the 4th East Asia Mechanical and Aerospace Engineering Workshop was successfully held in Hong
Kong. Now, this event has become part of the efforts that we are making to cope with the increasing demand
for mechanical engineers, a discipline which is regarded as the backbone of the Engineering in the modern
society. Meanwhile, it is in line with the continuous effort that the ME department and HK PolyU has been
making in developing expertise and academic programmes in the field of Aerospace Engineering and
related areas.
I am confident that this workshop will provide an ideal platform not only for academics from the four
universities to exchange ideas and views, but also for research students to mingle together and exchange
their learning and research experiences. Meanwhile, discussions are also expected among four participating
departments to continue the facilitating of student exchange programs in the near future.
We wish to thank all the authors who have contributed papers to this workshop, as well as student helpers
from the ME department of HK PolyU who make this event successful. We also appreciate the sponsorship
and support from the ME Department and the Hong Kong Polytechnic University for providing financial
support to this event.
San-Qiang Shi
Chairman of the organizing committee
Chair Professor of Mechanical Engineering
Department of Mechanical Engineering
The Hong Kong Polytechnic University
2
The 8th East Asia Mechanical and Aerospace Engineering Workshop
Date: 1 - 3 December 2018
Venue: The Hong Kong Polytechnic University, Hong Kong
Participating Universities:
Hokkaido University
Korea University
National Cheng Kung University
The Hong Kong Polytechnic University
Organizer:
Department of Mechanical Engineering, The Hong Kong Polytechnic University
Sponsor:
The Hong Kong Polytechnic University
Website:
http://www.polyu.edu.hk/me/eamaew/
3
Program Overview
Date Time Event Venue
1 Dec 2018
13:30 – 14:00 Registration Outside Y302
14:00 – 14:30 Opening ceremony + Photo taken
Y302
14:30 – 15:00 Keynote Lecture 1: Vehicle catching fire, mysterious or defective
(Prof. Simsoo Park, Korea University, Abstract #63)
15:00 – 15:30 Keynote Lecture 2: Biomechanical study on bone tissue as mineral/organic composite
(Prof. Masahiro Todoh, Hokkaido University, Abstract #75)
15:30 – 16:00
Keynote Lecture 3: A possible solution for UAVs flight control under IMU failure and GPS denied
situations
(Prof. Chao-Chung Peng, National Cheng Kung University, Abstract #40)
16:00 – 16:30 Tea break Outside Y302
16:30 – 17:00 Keynote Lecture 4: Novel nanofiber technologies for energy and environment
(Prof. Wallace Leung, The Hong Kong Polytechnic University, Abstract #8)
Y302
17:00 – 17:30 Keynote Lecture 5: CO2 Absorption/regeneration performance enhancement by nanoabsorbents
(Prof. Yong-Tae Kang, Korea University, Abstract #67)
17:30 – 18:00
Keynote Lecture 6: Investigating the effects of aortic dissection through 3D CT image
segmentation and CFD
(Prof. Ryo Takeda, Hokkaido University, Abstract #74)
18:00 – 18:15
International collaboration research in structural integrity assessment of
nuclear components
(Prof. Yun-Jae Kim, Korea University, Abstract #57)
18:30 – 20:30 Dinner at Theatre Lounge, PolyU
2 Dec 2018
9:30 – 10:00
Keynote Lecture 7: Multiphase microfluidics for encapsulation of porous and dual-drug released
PLGA microparticles
(Prof. Szu-I Yeh, National Cheng Kung University, Abstract #41) Y304
10:00 – 10:30 Keynote Lecture 8: Acoustic metasurface
(Prof. Jie Zhu, The Hong Kong Polytechnic University, Abstract #7)
10:30 – 11:00 Tea break Outside BC202
11:00 – 13:00 General sessions 1a, 1b, 1c BC201, BC202,
BC203
13:00 – 14:30 Lunch at V Cuisine (彩晶軒) in Harbour Crystal Centre (港晶中心)
14:30 – 16:15 General sessions 2a, 2b, 2c Panel discussion on student exchange and
faculty collaboration (venue to be determined)
BC201, BC202,
BC203
16:15 – 16:30 Tea break Outside BC202
16:30 – 18:30 General sessions 3a, 3b, 3c BC201, BC202,
BC203
19:00 – 21:00 Banquet at Choi Fook Royal Banquet (彩福) in Fortune Metropolis (置富都會)
3 Dec 2018 9:00 – 17:00 Day trip to Wanchai, the Peak, CWB, Stanley
4
Keynote Lectures
(Date: 1 Dec 2018, Venue: Y302)
Time Speaker Title Institute Abstract # Chairman
14:30-15:00 Simsoo Park Vehicle catching fire, mysterious or defective KU 63
Chih-Yung Wen
(PolyU)
15:00-15:30 Masahiro Todoh Biomechanical study on bone tissue as mineral/organic composite HU 75
15:30-16:00 Chao-Chung Peng A possible solution for UAVs flight control under IMU failure and
GPS denied situations NCKU 40
16:30-17:00 Wallace Leung Novel nanofiber technologies for energy and environment PolyU 8
Jiun-Jih Miau
(NCKU)
17:00-17:30 Yong-Tae Kang CO2 Absorption/regeneration performance enhancement by
nanoabsorbents KU 67
17:30-18:00 Ryo Takeda Investigating the effects of aortic dissection through 3D CT image
segmentation and CFD HU 74
(Date: 2 Dec 2018, Venue: Y304)
Time Speaker Title Institute Abstract # Chairman
9:30-10:00 Szu-I Yeh Multiphase microfluidics for encapsulation of porous and dual-
drug released PLGA microparticles NCKU 41 Hoseong Lee
(KU) 10:00-10:30 Jie Zhu Acoustic metasurface PolyU 7
Note: Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
5
Session 1a – Materials and Solid Mechanics (Date: 2 Dec 2018, Venue: BC201)
Time Author Title Institute Abstract # Chairman
11:00-11:15
Chen Lin,
Haihui Ruan,
San-Qiang Shi
Phase field modelling of pitting corrosion under mechanical
deformation PolyU 26
Liang An
(PolyU)
Masahiro Todoh
(HU)
11:15-11:30 Jyun-Kai Huang,
Wen-Bin Young Study on continuous bamboo fiber reinforced epoxy composites NCKU 44
11:30-11:45
Yoonjung Kim,
Myeongsang Lee,
Inchul Baek,
Taeyoung Yoon,
Sungsoo Na
Superior silk fibers from mechanically inferior constituents by
adapting to varying hydration conditions KU 54
11:45-12:00 Osamu Fujita Research on solid material flammability in microgravity by
utilizing KIBO in ISS HU 71
12:00-12:15
Guangzhe Li,
Bin Huang,
Zhefei Pan,
Xiangyu Su,
Liang An
Enhancing sodium ion storage properties of carbon sheets by
generating porous structures on carbon surface PolyU 32
12:15-12:30 Yu-Hui Yang,
Wen-Bin Young
A study on out of autoclave process for composites consolidated
with carbon fiber reinforced prepregs and dry fibers NCKU 45
12:30-12:45 Jung-Wook Wee,
Byoung-Ho Choi
Application of crack layer growth of HDPE under fatigue loading
with various R-ratios KU 61
12:45-13:00
Junmo Koo,
Sangmin Lee,
Taek-Soo Kim,
Joon Hyung Shim
Tensile test of ALD Al2O3 thin film on water surface KU 69
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
Session 1b – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC202)
Time Author Title Institute Abstract # Chairman
11:00-11:15 Shakeel Ahmad,
Hui Tang Flow past tandem cylinders with super-hydrophobic surfaces PolyU 2
Yong Tae Kang
(KU)
Hui Tang
(PolyU)
11:15-11:30 Chin-Hsiang Cheng Development in Stirling Cryocoolers in National Cheng Kung
University NCKU 47
11:30-11:45
Yujun Jung,
Joonbyum Kim,
Hoseong Lee
Residential and commercial building energy analysis with micro-
CHP systems KU 59
11:45-12:00 Yikai Li,
Peng Zhang
Linear analysis on the interfacial instability of a spherical liquid
droplet subject to a radial vibration BIT 76
12:00-12:15 Wallace Leung Scale-up on mixing in rotating microchannel under subcritical and
supercritical operating modes PolyU 9
12:15-12:30
Cheng-Han Lin,
Wei-Cheng Wang,
Xiang-Xin Chen,
Yu-Zhen Lin
The production of renewable jet fuel through glyceride-based oils NCKU 42
12:30-12:45
Wonhyeok Lee,
Seonggon Kim,
Ronghuan Xu,
Development of nanoemulsion absorbents for CO2 absorption KU 56
12:45-13:00
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
BIT – Beijing Institute of Technology
6
Session 1c – Control, Acoustics and Dynamics (Date: 2 Dec 2018, Venue: BC203)
Time Author Title Institute Abstract # Chairman
11:00-11:15
Sai Hu,
Weisong Wen,
Yin-Chiu Kan,
Li-Ta Hsu
Low-speed autonomous vehicle for campus delivery application PolyU 1
Li-Ta Hsu
(PolyU)
Sungsoo Na
(KU)
11:15-11:30
Chanhoo Park,
Jimin Kang,
Kuehwan Jang,
Sungsoo Na
Highly sensitive detection of KRAS using mismatch specific
protein and resonator KU 53
11:30-11:45
Ankit A. Ravankar,
Abhijeet Ravankar,
Yukinori
Kobayashi,
Takanori Emaru
A collaborative mapping and navigation framework for multi-
robot system HU 73
11:45-12:00
Yanfeng Xu,
Zhongqing Su,
Wenxiang Hu
Notch localization using the converted Lamb wave based on
compensation technique PolyU 23
12:00-12:15
M. Muddassir,
D. Navarro-
Alarcon,
O. Zahra,
M. Victorova,
M. WanYu
Sensor-guided skin photo-rejuvenation robotic system PolyU 28
12:15-12:30
Ruqi Sun,
Wai On Wong,
Li Cheng
Design analysis of a rotational and a translational tunable vibration
dampers PolyU 34
12:30-12:45
A. Mehmood,
I. Arif,
N. Hussain
Analysis of an aircraft in single horizontal tail failure emergency
and estimation of counter measures for safe landing PolyU 35
12:45-13:00
Racer K.H. Lam,
Leo M.T. Ng,
Garret C.Y. Lam,
Randolph C.K.
Leung
Experimental study of acoustic metamaterial silencer technology
for air ventilation duct PolyU 39
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
7
Session 2a – Materials and Solid Mechanics (Date: 2 Dec 2018, Venue: BC201)
Time Author Title Institute Abstract # Chairman
14:30-14:45 Talha Q. Ansari,
San-Qiang Shi
Multi-phase field model of localized corrosion kinetics with
corrosion products formation PolyU 27
Haihui Ruan
(PolyU)
Wen-Bin Young
(NCKU)
14:45-15:00 Hsuan-Hao Chiu,
Wen-Bin Young
Measurement of tensile strength and modulus for continuous
bamboo fiber reinforced composites NCKU 43
15:00-15:15 Inchul Baek,
Sungsoo Na
Protein redesign for enzymatic nano device through moledular
dynamics KU 55
15:15-15:30
Wang Jianbiao,
Wang Xu,
Ruan Haihui,
Zhou Siyang
The spitted frequency of beam vibration and the corresponding
Young’s modulus in the high temperature IET experiments PolyU 37
15:30-15:45
Chin-Hsiang
Cheng,
Chun-Kai Chang
Properties improvement by fiber laser treating for HVOF WC/Co
coating NCKU 48
15:45-16:00 Min-Seok Choi,
Byoung-Ho Choi
Effect of carbon nanotube (CNT) content on the mechanical and
fracture properties of PETG/CNT nanocomposite films KU 64
16:00-16:15
Gwon Deok Han,
Minsik Kim,
Junmo Koo,
Joon Hyung Shim
Fabrication of composite cathodes for solid oxide fuel cells using
inkjet printing KU 70
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
Session 2b – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC202)
Time Author Title Institute Abstract # Chairman
14:30-14:45 Feng Ren,
Hui Tang
Machine learning control of vortex-induced vibration of a circular
cylinder PolyU 3
Byoung-Ho Choi
(KU)
Xinyan Huang
(PolyU)
14:45-15:00 Jiun-Jih Miau Flow visualization near a contoured body surface NCKU 51
15:00-15:15 Byoung-Ho Choi Observation and modelling of tear and dart characteristics of
polyethylene blown films KU 66
15:15-15:30 Xinyan Huang Dripping phenomena in fire: Critical drip size and blue flame
shedding PolyU 12
15:30-15:45 Po-Hsiung Huang,
Keh-Chin Chang
Analysis of fluctuating velocity in turbulent near wake behind
circular cylinder NCKU 46
15:45-16:00
Yujun Jung,
Joonbyum Kim,
Hoseong Lee
Energy, environmental, economic evaluation of geothermal
assisted commercial building using CCHP KU 58
16:00-16:15
Yicheng Chi,
Qinghui Meng,
Lidong Zhang,
Peng Zhang
Towards high-level theoretical studies of aviation kerosene
molecules: An ONIOM[QCISD(T)/CBS:DFT] study on hydrogen
abstraction reactions of large straight-chain alkanes molecules
CnH2n+2 + (H, OH, HO2) radicals
PolyU 14
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
8
Session 2c – Control, Acoustics and Dynamics + Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC203)
Time Author Title Institute Abstract # Chairman
14:30-14:45
Guohao Zhang,
Haosheng Xu,
Li-Ta Hsu
3D mapping aided GNSS positioning for smartphone users in
highly urbanized cities PolyU 10
Chao-Chung Peng
(NCKU)
Ankit A. Ravankar
(HU)
14:45-15:00
Weisong Wen,
Xiwei Bai,
Li-Ta Hsu
Multi-sensor integration-based localization for autonomous vehicle
in urbanized area PolyU 77
15:00-15:15
Su Wang,
Ankit A. Ravankar,
Abhijeet Ravanka,
Yukinori
Kobayashi,
Takanori Emaru
Scale-aware indoor localization using 2D laser rangefinder in a
weak map from monocular SLAM HU 72
15:15-15:30
Weifeng Zhou,
Boyang Li,
Jingxuan Sun,
Chinh-yung Wen
Controlling of an autonomous tail-sitter take-off and landing
unmanned aerial vehicles by adaptive model predictive control PolyU 25
15:30-15:45
Yafeng Wang,
Zhihua Xiao,
Sanqiang Shi
Study of gas bubble behavior for high burnup nuclear fuels using
the phase field methodology PolyU 18
15:45-16:00
Ken Chunkit Uy,
Lisong Shi,
Chihyung Wen
Chemical-vibrational coupling effect in detonation stability PolyU 20
16:00-16:15
E Fan,
Jiaao Hao,
Ben Guan,
Chin-Yung Wen
Influence of combustion on the shock pattern and interface
evolution in shock wave-heavy bubble interaction PolyU 24
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
9
Session 3a – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC201)
Time Author Title Institute Abstract # Chairman
16:30-16:45
Fuwang Zhao,
M. N. Mumtaz
Qadri,
Hui Tang
Modelling of a bio-inspired flow energy harvester PolyU 4
Joon Hyung Shim
(KU)
Yang Liu
(PolyU)
16:45-17:00 Chih-Yuan Weng,
Tzong-Shyng Leu
Design of loop heat pipes with two-phase flow pattern based
modeling NCKU 52
17:00-17:15 Joon Hyung Shim Ceramic fuel cell power plants KU 68
17:15-17:30 X. L. Yang,
Y. Liu
An improved k-ω-φ-α turbulence model applied to near-wall,
separated and impinging jet flows and heat transfer PolyU 36
17:30-17:45
Chin-Hsiang
Cheng,
Yi-Jia Chen,
Kun-Chia Hsieh,
Yu-Ting Lin
Numerical simulation of linear alternator integrated with free-
piston Stirling Engine NCKU 49
17:45-18:00
Jinwoo Oh,
Ukmin Han,
Hoseong Lee
Numerical study of the application of organic Rankine cycle in
cascade heat utilization district heating and cooling KU 60
18:00-18:15 Zhenyu Zhang,
Peng Zhang
A practical pressure-dependent droplet collision model for
Lagrangian simulation of impinging sprays under high ambient
pressures
PolyU 15
18:15-18:30
Chengming He,
Xi Xia,
Peng Zhang
Viscous dissipation of bouncing droplets undergoing off-center
collision PolyU 19
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
Session 3b – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC202)
Time Author Title Institute Abstract # Chairman
2 December
16:30-16:45
Zhaokun Wang,
Chenglei Wang,
Hui Tang
Simulation of fluid-structure interaction during
phacoemulsification-based cataract surgery PolyU 5
Simsoo Park
(KU)
Szu-I Yeh
(NCKU)
16:45-17:00
Shaorun Lin,
Peiyi Sun,
Xinyan Huang
Three-stage combustion of peat under external radiation PolyU 11
17:00-17:15 Wei-Han Chen,
Szu-I Yeh
Development and kinematic analysis of a passerine-inspired
flapping wing robot for aerodynamic quantification NCKU 50
17:15-17:30
Sungha Baek,
Jaeho Cho,
Seungho Ahn,
Cha-Lee Myung,
Simsoo Park
Impact of a downsized LPG direct injection vehicle on CO2 and
nano-particle emission reduction potential compared to a gasoline
direct injection vehicle
KU 62
17:30-17:45
Yu Liang,
Lili Liu,
Ben Guan,
Chih-Yung Wen
The evolution of an air/SF6/air fluid layer impacted by shock wave PolyU 16
17:45-18:00 Long Tiehan,
Chih-Yung Wen
Instability modes in high-speed boundary layer with ultrasonically
absorptive coating: A new theory and dynamic mode
decomposition
PolyU 21
18:00-18:15
Xudong Tian,
Tiehan Long,
Rui Zhao,
Chih-yung Wen
Design of ultrasonic absorptive coating for the stabilization of
Mack modes in a high-speed boundary layer PolyU 29
18:15-18:30
Z.F. Pan,
Y.D. Bi,
X.Y. Su,
G.Z. Li,
L. An
Mathematical modelling of hybrid direct ethylene glycol fuel cells
with hydrogen peroxide as oxidant PolyU 31
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php
10
Session 3c – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC203)
Time Author Title Institute Abstract # Chairman
16:30-16:45 Chong Wei,
Hui Tang
Effects of owl-inspired leading-edge serrations on sound
suppression and aerodynamic performance PolyU 6
Ryo Takeda
(HU)
Peng Zhang
(PolyU)
16:45-17:00 Xi Xia,
Peng Zhang Vortex sheet formation of flickering buoyant diffusion flames PolyU 13
17:00-17:15 Sung Jin You,
Jin Taek Chung
Numerical study of the aspect ratio effect on the film cooling
effectiveness KU 65
17:15-17:30
Lili Liu,
Yu Liang,
Ben Guan,
Chih-Yung Wen
Richtmyer-Meshkov instability on dual-mode interface impacted
by planar shock wave PolyU 17
17:30-17:45
Ben Guan,
E Fan,
Chih-Yung Wen
Numerical study on the shock convergence induced jet formation
of heavy gas inhomogeneities PolyU 22
17:45-18:00
Lisong Shi,
Ken Chunkit Uy,
and Chihyung Wen
Lisong Shi1, Ken Chunkit Uy2, and Chihyung Wen3 PolyU 30
18:00-18:15 Hao Zhang,
Chih-Yung Wen
Three-dimensional numerical investigation on the performance
degradation of a Pitot-static system caused by in-flight ice
accretion
PolyU 33
18:15-18:30
Xiangyu Su,
Zhefei Pan,
Yanding Bi,
Guangzhe Li,
Bin Huang,
Liang An
Performance of a passive formate fuel cell PolyU 38
Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php