Why?
To determine if there is any internal
migration of liquid or gas up the surface
casing vent.
Vent leaks can happen anytime during the
life of the well.
Vent leaks may be liquid or gas. The AER
views liquid vents generally as serious.
Proper build up testing must be done to
ensure stabilized pressure that doesn’t
exceed 11 kpa/m.
Surface Case Vent Testing Bubble test must be completed 90 days after drilling. Contact SSI for a free bubble test kit.
Liquid SCVT
Gas SCVT
Remote AccessSurface Solutions can access sites with quad or side x side in very remote areas. Or in
some cases, by helicopter.
Surface Case Vent TestingIn some cases surface casings produce gas and liquid simultaneously. SSI has 400 l plastic
knock out tanks to separate test fluid.
Benefits
SSI approach to vent testing is based on
time and due diligence.
We are able to leave units unattended as
long as needed to find the actual
stabilization point of the source.
Over 1000 tests in 14+ years.
Conducted SCVT in four western
provinces to satisfy local government
regulations.
Safety Overview
Surface Solutions is committed to
maintaining a high standard in health and
safety. All company specific orientations
and standard PPE Requirements.
Along with:
BC First Aid
Alberta Safety Council ATV training
Bear Awareness (Enform)
www.SurfaceSolutions.ca
Mike Beck
Business Development Manager
Mark Jickling – Northern Sales
Gil Kleven – Calgary Sales
GRANDE PRAIRIE - HEAD OFFICE
RED DEER | ESTEVAN | CALGARY