INDUSTRYINDUSTRYCAPTAINS OFCAPTAINS OF
INDUSTRYCAPTAINS OF
INDUSTRYBUSINESS PROFILE: Woodland Equipment
From Humble Beginnings35 Years Later! See Page 52
RONA
LD M
ULLI
NS
Publications Mail Agreement #40070144MAY 2015 VOL. 44 NO. 5
Advertisers Index ........6
Section Two ..............33
Classifieds .................54
Section Three ............65
Truck Photo Ads ........76
CANADAS #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER SUPPLYPOST.COM
E C O N O M Y
Alberta Budget Keeps Oil & Gas Industry Competitive PAGE 10
G O V E R N M E N T
Canada Supports Workforce With Community College Funding PAGE 36
B U S I N E S S
Powerscreen World DealerConference PAGE 44
M A N U F A C T U R I N G
LiuGong Opens First FactoryIn Brazil PAGE 51
WESTERN CANADA EDITION $3.75 MAY 2015Family Owned Since 1971
1.35%*Business Savings Account
*Rate is subject to change without notice. Interest is calculated on the daily closing balance based on the portion within each tier and paid monthly. Interest is paid as follows: 1.30% on deposits up to $250,000, 1.35% on deposits between $250,000.01 to $15 million and 0.25% on deposits above $15 million. Available in-branch only.
There when you need it, growing when you dont.cwbank.com
The Woodland Team: Craig Stanley, James Byrd, Don Anderson, and George Anderson standing in front of Woodlands Kamloops Headquarters.
Page 2 Supply Post Western Canada Edition supplypost.com May 2015
EARTH CONTRACTORS
FIND MORE AT UNITEDEARTHCONTRACTORS.COM
$62,000
D5M LGP Transmission just rebuilt, great tight machine with lots of life, new paint and 75% U/C. 8,000 hrs.
Volvo Water Wagon 4 x4 Volvo A25C 5000 gal tank. Also available for rent, call for pricing.
$69,000
$105,000 $85,0002003 966G Wheel loader, s/n 966g3sw01488, Still a strong runner, ready to work.
$78,500
JD225C c/w clean up bucket, U/C approx. 80% left, very clean machine, approx. 11,000 hrs.
$65,000JD 350DLC 9100 hours approx, very tight maintained machine..undercarriage in good shape and all around look and feel of machine is great.
$95,000
$49,000
Komatsu HA250 Water Wagon, great looking and running machine. Very strong engine, 6x6.
$39,000
2010 JD 310SJLike new! TC controls, 5,000 hours.
$75,000
Starting at $80,000
Volvo A25D 1 of 3 rock trucks very clean, very strong great runners. Call for more info, approx 9000 hours.
$38,000
Cat D4H LGP s/n 9db04913, great machine, runs very well. c/w cab u/c 80%.
2002 980G series 2 Wheel loader, well maintained, good running machine, c/w gp bucket.
$79,900
OFFICE604-940-0001 Fax 604-940-0005RENTALSTony 604-230-4047 [email protected]
SALESDave [email protected]
Proudly Serving the Lower Mainland Since 1945
2008 CAT 262C SKIDSTEER LOADERV-Track system, brand new tires that Q/C, near new tracks and new cutting edge on bkt, very clean machine, in great shape.
$75,0002002 CAT IT-38G INTEGRATED TOOL CARRIER c/w Q/C bkt, aux. hyd., cab, 20.5R25, additional accessories upon request. 10,000 hrs.
$95,000
JD 225DLC 7900 hours very clean well maintained machine, undercarriage has lots of life and the machine feels like new!
1999 Cat D35OE Rock Truck, well maintained, ex Metro Vancouver Machines, new paint.
$69,000
USED EQUIPMENT FOR SALE
RENTALS SALES CONTRACTING
$38,000
[email protected]@hotmail.com
WE ALSO RENT OUR
EQUIPMENT
RENTAL LIST: D5M LGP DOZER
D4H LGP DOZER
D3C LGP DOZER
JD 350D EXCAVATOR
JD 225D EXCAVATOR
JD 225C EXCAVATOR
JD 310SJ LOADER BACKHOE
CAT 980G WHEEL LOADER
CAT 966G WHEEL LOADER
CAT IT38G WHEEL LOADER
CAT 140G MOTOR GRADER
CAT D350E ARTICULATING TRUCKS
A25D VOLVO ARTICULATING TRUCKS
OFF ROAD WATER TRUCKS
BOBCAT T190 SKID STEER LOADER
CAT 262C SKID STEER LOADER
MINI EXCAVATORS
MULTIPLE ATTACHMENTS
For more information, call604-940-0001
1 LEFT DEAL
PENDING
NEW WEBSITE NOW RUNNING AT www.unitedearthcontractors.com
$69,000
Volvo water trucks from 4x4 to 6x6. All good runners and maintained. Starting @ $59,000.
$59,000
2 LEFT
SOLDSOLD
SOLDSOLD
SOLDSOLD
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 3
bill@
skre
enqu
ip.c
om
ww
w.s
kree
nqui
p.co
mCA
LL U
S FO
R YO
UR N
EW A
ND U
SED
SCRE
ENIN
G &
CRU
SHIN
G EQ
UIPM
ENT
NEED
SSC
REEN
S
SA
LE
S &
RE
NT
ALS
1
-800-2
05-6
633
604-6
71-1
066
Call
Bill
toda
y at
604
-671
-106
6
CALL
SKR
EENQ
UIP
SALE
S FO
R EZ
YSTA
K W
HEEL
ED A
ND T
RACK
CON
VEYO
RS. P
RODU
CT IN
STO
CK N
OW!
INTR
ODUC
ING
THE
NEW
J-1
170A
S JA
W C
RUSH
ER!
SKRE
ENQU
IP S
UPPL
IES
A FU
LL R
ANGE
OF
PIAN
O W
IRE
SCRE
ENS
FOR
ALL
MAK
ES A
ND M
ODEL
S. C
ALL
FOR
DETA
ILS
AND
AVAI
LABI
LITY
.
Page 4 Supply Post Western Canada Edition supplypost.com May 2015
See us in the Outside Equipment
Display Areas at the ILA and CNRE
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 5
Components Cylinders Cabs EnginesUndercarriage Booms Sticks Linkage
www.langleyexcavator.com | [email protected]
Focused on Parts for John Deere & Hitachi Late Model Excavators
5425 Production Blvd., Surrey, BC, V3S 8P6Phone 604.530.5758Fax 604.530.3554
ZX 450LC-3 DISMANTLED EX1100-3/1200BE DIG BUCKET - POR
Toll Free 1.888.530.5444
EXCAVATORS
Model Op. Wt.
TB216 3,524 lbs.TB138FR 8,535 lbs.TB153FR 12,681 lbs.TB290 18,780 lbs.TB180FR 18,370 lbs.TB1140-S2 34,700 lbs. (RT)
TRACK LOADERS
Model Tipping Load
TL230-2 5,400 lbs.TL10 6,867 lbs.TL12 8,102 lbs.
SKID STEERS
Model Tipping Load
TS50R 3,000 lbs.TS60R 3,000 lbs.TS50V 4,000 lbs.TS60V 4,000 lbs.TS70R 3,987 lbs.TS70V 5,270 lbs.
WHEEL LOADERS
Model HP
TW50 57 hpTW65 69 hpTW80 80 hp
Takeuchi wheel loaders provide incredible reach and dump height for outstanding material handling. Three compact models available.
MODEL TW65, 69 HP, 10,582 lbs op.wt.
SMALL FOOTPRINT
BIG LIFT
1-888-575-LIFT (5438)
www.toplift.com
60 Horsepower, Cab with heat and A/C, class lead-ing ground clearance! 2 year warranty
BRAND NEW 2014 TAKEUCHI TS60R SKID STEER
$32,900
The TB290 is a newly re-designed machine featuring better visibility, improved service access, a multi-function monitor and switch panel, electronic throttle control and a turbo charged Final Tier 4 engine.
MODEL TB290 69.2 HP, 18,780 lbs op.wt.
BRANDNEW
MODEL
MODEL TB180FR, 64 HP, 18,370 lbs op.wt.
ZERO TAIL
SWING
The exclusive, patented side-to-side boom shift system makes the FR Series excavators the perfect choice when you need power and performance and the capability to work in tight spaces.
CONTACTJonathan Houweling
Cell: (604) 802-0841
THOSE IN THE KNOW KNOW
Available in 138 & 153 size
17567 55B Ave, Surrey BC
Page 6 Supply Post Western Canada Edition supplypost.com May 2015
NEW TO THE FLEET
Call Ernie or Daryl Today!
WWW.RIVERSIDEEQUIPMENT.COM3112 Pratt St., Abbotsford, BC V2S 3C7 Phone 604-556-0557 Fax 604-556-0559
Email [email protected]@riversideequipment.com
CellErnie: 604-854-0583Daryl: 604-309-3980
1-800-566-0557
2006 VOLVO A30D ARTICULATING TRUCK SN: A30DV73280, 9558 hrs, truck is out on rent. 750/65R25 rubber, new
Yokohamas front axle, #2&3 axles, Bridgestone 50%, oil samples & repair history available.............$130,000.
2011 PRODIG AUGER Complete with 8 auger bit, ow is 40 GPM .......................3,000.
"LOCALLY OWNED AND OPERATED"
VISIT: WWW.RIVERSIDEEQUIPMENT.COMFOR OUR FULL LINE-UP & RENTAL RATES!
RiversideEquipment Rentals
FOR SALE
CAT 314E EXCAVATOR
Accurate Fabricating 53
Alberta Construction 46
Alberta Engines 60
Alquip Diesel 74
All Cut Systems 46
Aspen Trailer 68
Avenue Machinery 28
Axis Forestry 61
B & G Parts 43
Backyard Bandsaw 20
Banning Equipment 58
Blackwater Timber 58
Blanche Equipment 5
Bobs Diesel 54
Bobcat 40
Brandt Tractor 16, 17
Brandt Value Parts 44, 60
Brown International 57
Brutus Truck Bodies 35
Camex 69
Canadian Western Bank 1, 30
Case 37
CC Equipment 24
CE Heathcote 61
Chieftain 46
Coast Pacific Dist. 30
Coastal Pacific Equip 59
Coldstream Equipment 27
Continental Equip 26
Crawler Sales 43
Crombie Transport 55
CTS Kenworth 76
Diamond Industries 26
Dolphin Mechanical 59
Doosan 27
Douglas Lake Equipment 21
Dressta 39
E-Quip 55
Eagle Coast Mining 54
Finning 19
Fiorentino Bros. 55
Foreman Equipment 33
ForesTech 18
Frontier Power Products 26
Frontline Machinery 15
Gordon Bros. 11
Great West Equipment 9
Groundworx 23, 25
GRP Construction 20, 45
Guytec 61
Handlers 14
Harbour International 72
Hercules Sealing Products 23
HKX 46
Hope Mechanical 56
Inland Equip Sales 12
Interior Diesel 51
International Machinery 67
Iron Planet 63
Jade Equipment 40
Jordef Enterprises 56
Juniper Equipment 26
Knight Trailer Sales 74
Kobelco 41
Korpan 10
Langley Excavator 5
LiuGong 64
LNH Equipment 57
LoneTrack 34
M & M Logging 57
Magnum Attachments 13
Magnum Trailer 71
Major Equipment 45
Master Promotions 36, 38
Michener Allen 27
Moodys Equipment 47
Mormak 13
National Leasing 8
Nor Mar 35
Norstone Excavating 51
Northland Chipper 42
NW Fortec 43
Omineca 57
One.7 Inc. 77
Oversized Equip 58
P & R Truck Centre 78
Pacific Rim Equip 7
Pacific Site Constructors 36
Parker Pacific 32
Penners 12
Pierce Pacific 29
PM Industries 79
Pollard (Chilliwack) 8
Prince George Truck 61
Profab 80
Prolenc 70
Puget Sound Truck 73
Querel Trailers 65
Ramsey Co. 51
RDM Equipment 24
Riverside Equipment 6
Rocky Mountain Equip. 48,49
Rollins 28
Royquip 56
RWF Bron 50
Saratoga Ventures 22
Sexsmith Used Farm Parts 59
ShearForce 22
Skreenquip Sales 3
Sommers Generators 24
Specialized Trailer 70
Summit Trailer 75
Supply Post 29, 62
Terra Firma 50
Top Lift 5
Toro Steel Buildings 51
Trak Tech 30
Transfinder Equipment 47
Travelers Financial 42
Trinity Excavating 54, 60
Truck Photo Ads 76
True North Equipment 53
Tundra Equipment 61
Tyalta 14
Tysea Mfg. 19
Twin Deer 42, 60
United Earth Contractors 2
Van Ed 18, 38
VI Equipment 10
Wallys Private Parts 59
Warner HD Parts 28
Western Star 66
Westerra Equipment 31
Woodland 4
A D V E R T I S E R S I N D E X
NEXT DEADLINE: Friday, May 15, 2015
RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only)No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5
#105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5
www.supplypost.com www.truckpost.caPHONE (604) 607-5577 FAX (604) 607-0533 TOLL FREE 1-800-663-4802
The Supply Post is a proud member of the following Trade Associations:
INTERIORLOGGING
ASSOCIATION
www.postpublishers.com
Produced by:
CIRCULATIONDirect Mailed copies .............. 14,200Newsstand copies .................... 2,200Total distribution .................... 16,400
Please call our office for full details
Published Monthly - Printed in Canada
Publications Mail Agreement No. 40070144Reproduction of any material including photographs and/or
advertisements in whole or in part is forbidden.
Managing Partner ...................................Gary Mazur
Sales Manager ....................................... Jeff Watson
Regional Account Manager .................Jake Peterson
Regional Account Manager ...................Megan Avery
Classified Sales................................Michelle Villiers
Sales/IT ..................................................Gary Mazur
Marketing/Circulation Manager ....... Christine Mazur
Controller ........................................... Debra Watson
Accounting Assistant .......................... Heather Egeto
Editorial/Production Assistant ............... Sheryl Kaye
Art Director ............................................. Linda Horn
Graphic Designer .................................Lisa Schmale
Graphic Designer ........................... Carol Van Muyen
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 7
after hrs call: JOE HEWER 250-490-6795 [email protected] DAVE GARNETT 250-490-7976 [email protected]
Dealer for
Compaction Equipment
Phone: 250-493-4545 Fax: 250-493-8819 AFTER HRS: Joe Hewer 250-490-6795 Dave Garnett 250-490-7976
www.pacificrimequipment.com E-Mail: [email protected] 1698 Dartmouth Rd, Penticton, BC V2A 4B8
Quality construction equipment made in Japan
RENT OR RENTAL PURCHASE AVAILABLE
Ski Apex Mountain Resort Tel 1-877-777-2379 www.apexresort.com
PACIFIC RIM RENTS!www.pacificrimequipment.com
MAY SPECIAL $99,900
Ski Apex Mountain Resort Tel 1-877-777-2379 www.apexresort.com
$131,900 $141,500 $159,900
2012 CAT 320DL EXCAVATOR 24" PADS, AIR, AUX HYD PIPING, 2,397 HRS
2013 HITACHI ZX200-3 EXCAVATOR 24" PADS, AIR, ONLY 525 HRS
2007 HITACHI ZX450LC-3 EXCAVATOR 36" PADS, AIR, HYD Q/C, AUX PIPING, ONLY 7,677 HRS
2006 CAT D6N LGP DOZERS 6 WAY DOZER, A/C CAB, DIFF STEER, MS RIPPER, 7,700 HRS
EXCAVATORS 2014 YANMAR VIO17 RUBBER, EXP. U/C, HYD THUMB, 340 hrs ........$28,900. NEW YANMAR VIO25-6 RUBBER, CANOPY, BRAND NEW .........................POR. 2007 BOBCAT 329G RUBBER, CANOPY, HYD THUMB, 2,122 HRS ......$25,750. 2007 DEERE 35D RUBBER, CANOPY, HYD THUMB, 6,200 HRS .......... $23,900. 2011 DEERE 35D RUBBER,CANOPY, HYD THUIMB, 4.030 HRS ...........$25,900. NEW YANMAR VIO35-6 RUBBER, CAB, AIR, NEW MODEL IN STOCK ........POR. NEW YANMAR VIO45-6 RUBBER, CAB AIR, NEW MODEL IN STOCK .........POR. 2008 YANMAR VIO55-5 RUBBER, CAB AIR, HYD THUMB, 2,116 HRS $39,900. 2013 YANMAR VIO55-5 STEEL, CAB, AIR, HYD THUMB, 351 HRS .....$57,900. NEW YANMAR VIO55-6 STEEL, CAB AIR, NEW MODEL IN STOCK .......... POR. 2007 CAT 308C CR STEEL, BLADE, THUMB, Q/C, CABGUARD, 2,200 HRS........ ..............................................................................................................SOON. 2008 CAT 308C CR 18" PADS, AIR, BLADE, ONLY 1,604 HRS ............$61,500. 2012 KOMATSU PC78US-8 18" PADS, BOR, Q/C, HYD THUMB, BLADE, 221 HRS ............................................................................................$89,900. NEW YANMAR VIO80-1A STEEL PADS, CAB/AIR, BRAND NEW ................POR. NEW YANMAR SV100-2 STEEL PADS, CAB/AIR, 22,000LB MACHINE ..... POR. 2009 HITACHI ZX120-3 20" PADS, AIR, ONLY 2,483 HRS, Q/C, DIG ..$89,900. 2012 CAT 312D 24" PADS, AIR COND, PIPING, ONLY 434 HRS..................POR. 2005 CAT 314C LCR 20" PADS, DOZER BLADE, Q/C, CLEAN UP BKT, 12,950 HRS ...................................................................................... $44,900. 2002 HITACHI ZX135UR 20" PADS, BLADE, OFFSET, 6,600 HRS ...... $49,900. 2008 HITACHI ZX135US 28" PADS, AIR, L.ARM,ONLY 1,673 HRS ....$104,900. 2011 HITACHI ZX135US-3 28" PADS, AIR, DOZER BLADE, Q/C, ONLY 2,344 HRS .......................................................................................$121,500. 2011 HITACHI ZX135US-3 28" PADS, AIR, BLADE, Q/C, HYD THUMB, 1,612 HRS .......................................................................................$141,500. 2006 HITACHI ZX160LC 24" PADS, AIR, PIPING, ONLY 3,815 HRS .........SOON. 2013 KOBELCO ED150-2 6 WAY DOZER, HYD, THUMB, ONLY 671 HRS ........ ........................................................................................................$179,900. 2012 CAT 316EL 28" PADS,AIR, RV CAMERA,ONLY 1,548 HRS ........$164,900. 2006 DEERE 180C W WHEELED EXCAVATOR, OUTRIGGERS/BLADE Q/C, 11,290 HRS, 2 BUCKETS ..................................................................$59,900. 2000 HITACHI ZX200 24" PADS, AIR, Q/C, AUX HYD, 14,000 HRS ......$29,900. 2008 HITACHI ZX200LC-3 32" PADS, 4,619 HRS, C/W 55' LONG REACH FRONT .....................................................................................SALE OR RENT 2011 HITACHI ZX200LC-3 32" PADS, AIR, ONLY 2,620 HRS, Q/CHANGE ......... ........................................................................................................$134,900.2012 HITACHI ZX210LC-3 28" PADS, AIR, HYD THUMB, Q/C,CABGUARD ........ .......................................................................................................FOR RENT. 2012 HITACHI ZX210LC-3 28" PADS, AIR, HYD Q/C, HYD THUMB ...FOR RENT. 2013 HITACHI ZX210K-3 24" PADS, AIR, PIPING, ONLY 1,026 HRS .$134,900. 2012 HITACHI ZX225USR-3 28" PADS, AIR, ONLY 2,588 HRS ..........$124,900. 2013 HITACHI ZX225USLC-3 32" PADS, AIR, Q/C, HYD THUMB, CABGUARD .... .......................................................................................................FOR RENT. 2013 HITACHI ZX225USLC-3 32" PADS, AIR, Q/C, HYDRAULIC THUMB ............ .......................................................................................................FOR RENT. 2015 HITACHI ZX245USLC-5 32" PADS, AIR, Q/C, HYD THUMB .....FOR RENT. 2015 HITACHI ZX245USLC-5 32" PADS, AIR, Q/C, HYD THUMB, CABGUARD . .......................................................................................................FOR RENT. 2006 HITACHI ZX270LC-3 32" PADS, AIR, Q/C, DIG, ONLY 5,530 HRS ........... ........................................................................................................$107,900. 2013 VOLVO ECR305 CL 32" PADS, AIR, HYD Q/C, HYD THUMB, ONLY 1,750 HRS .................................................................................................$229,900. 2011 KOMATSU PC350LC-8 24" PADS, AIR, Q/C, CABGUARD, Q/C, HYD THUMB, 1,998 HRS ......................................................................... $214,900. 2013 KOMATSU PC350LC-8 24" PADS, AIR, Q/C, HYDRAULIC THUMB, CABGUARD .....................................................................................FOR RENT.
DOZERS 2008 CAT D3K XL PAT DOZER, MS RIPPER, OROPS, 2,174 HRS ........$63,900. 2007 CAT D6N XL 6 WAY DOZER, A/C CAB, DIFF STEER, MS RIPPER, 3,995 HRS .................................................................................................$185,900. 2008 KOMATSU D65WX-15EO 6 WAY DOZER, A/C CAB, MS RIPPER, 6,295 HRS ...................................................................................................$83,900.
2011 KOMATSU D65EX-16 SIGMA DOZER, A/C, CAB, MS RIPPER, ONLY 3,928 HRS ..............................................................................$189,900. 2004 CAT D8R SII S/U TILT DOZER, MS RIPPER, 9,580 HRS ............ $239,900.
WHEEL LOADERS/SKID STEERS/BACKHOES 2013 YANMAR V4-6 HY STAT, CAB, ONLY 223 HOURS ......................$52,500. 2012 KOMATSU WA250PZ-6 20.5R TIRES, CAB AIR, HYD Q/C, AUX HYD .......... ........................................................................................................$127,900. 2006 KOMATSU WA320-5 20.5R TIRES, CAB, AIR, R/C, 4,460 HRS ...$99,900. 2011 KOMATSU WA320-6 20.5R TIRES, CAB, AIR, R/C, Q/C BKT, 3,012 HRS .. ........................................................................................................$132,500. 2007 KOMATSU WA380-6 23.5R TIRES,CAB AIR, R/C, ONLY 5,406 HRS ........... ........................................................................................................$124,900. 2007 KOMATSU WA380-6 23.5R TIRES, CAB AIR, R/C, Q/C, BKT/FORKS ONLY 3,600 HRS ..................................................................................... FOR RENT. 2009 CAT IT38H 20.5R TIRES, HYD Q/C, AUX HYD, R/C,11,198 HRS ....$91,500. 2011 CAT 950H 23.5 L-5 TIRES,CAB, AIR, ONLY 1,500 HRS ............ ON RENT. 2007 KOMATSU WA480-6 26.5 TIRES, A/C CAB, R/C, 6.5 CU YD BUCKET, 10,000 HRS ...................................................................................... $94,900. 2007 BOBCAT 463F 44" BUCKET, CANOPY, 1,379 HRS ....................... SOON. 2007 BOBCAT S130 GP BUCKET, CANOPY, ONLY 1,553 HRS ............ $18,500. 2007 BOBCAT S130 GP BUCKET, CANOPY, ONLY 1,864 HRS ............ $18,500. 2010 BOBCAT S205 GP BKT, CAB AIR,ONLY, 719 HRS,2 SPEED ............ SOON. 2013 MUSTANG 2700V 70" GP BKT, CANOPY, ONLY 71 HRS ............. $35,900. 2012 BOBCAT T750 A/C CAB,H FLOW, 80" MULT PURPOSE BKT, ONLY 1,356 HRS ............................................................................... $54,900. NEW JCB 260T CAB AIR, 84" BUCKET, TRACK MACHINE ......................... POR. NEW JCB 300T CAB AIR, HI FLO, 84" BKT, TRACK MACHINE ....................POR.
GRADERS / COMPACTORS 1993 CAT 140G CAB, 6,985 HRS, CAT MS RIPPER ................................ SOON.
2001 CAT 160H VHP 17.5 TIRES, CAB, 18' MB, 15,441 HRS, MS RIPPER ......... ............................................................................................................. SOON.2005 CAT 160H VHP 17.5 TIRES, CAB, 14' MB, ACCUM, PB, 11,487 HRS ......... ............................................................................................................. SOON. 2006 CAT 143H VHP 17.5 TIRES, CAB, AIR, 6 WHEEL DRIVE, SNOW WING/RIPPER, 7,471 HRS ......................................................................... $146,900. 2009 CAT 14M VHP 20.5R TIRES, 16'MB, ACCUM, A/C, 9,586 HRS . $179,900. 2006 ING. RAND SD25D 42" DRUM, KUBOTA ENG, 726 HRS ........ FOR RENT. 2006 ING. RAND SD45D TF 54" DRUM, NEW CUMMINS B3.3 ENG, ONLY 960 HRS .................................................................................................. $36,900. 2009 SAKAI SV505D-1 84" DRUM, CANOPY, ONLY 197 HRS ............ $78,900.
DUMP TRUCKS 2006 International 4200 VALEW 10' DUMP BOX, 6 SPEED .............. $39,900. 2005 CAT 730 23.5 TIRES, AIR, TAILGATE, ONLY 2,026 ORIGINAL HRS ............. ...................................................................................................... FOR RENT. 2007 VOLVO A30D 23.5 TIRES, HTD BOX, EMERG STEER, 8,332 HRS .............. ....................................................................................................... $149,900. 2008 VOLVO A30E 23.5R TIRES, 30 TON ART TRUCK, 6,368 HRS ... FOR RENT. 2011 VOLVO A30F 23.5 TIRES, RV CAMERA, EMERG STEER, 3,805 HRS........... ...................................................................................................... $249,900. 2011 CAT 730 750/65R25 TIEWA, RV CAMERA, HTD BOX, 4,043 HRS .............. ....................................................................................................... $229,900. 2012 TEREX TA300 GEN 9 23.5 TIRES, RETARDER, RV CAM, 3,400 HRS ......... .........................................................................................................$199,900.
LIFTS & LIFT TRUCKS 2000 SKYTRAK 10542 10,000LB CAP, CUMMINS ENG, 6,596 HRS ... $26,900. 2005 JLG G943A 9,000LB, CAB, TILT CARRIAGE, 6,600 HRS ............ $46,900. 2008 GENIE GS-1930 19' SCISSOR LIFT, 500LB CAP, 234 HRS ........... $9,250. 2005 GENIE Z45/25J 4X4, DIESEL, ONLY 1,424 HRS, 45' LIFT .......... $35,900. 2005 GENIE Z45/25J 4X4, DIESEL, ONLY 772 HRS, 45' LIFT .......... FOR RENT. 2006 GENIE Z45/25J 4X4, DIESEL, ONLY 1,700 HRS, 45' LIFT .......... $39,900. 1999 GENIE Z60/34 4X4, ARTICULATED BOOM LIFT, DUAL FUEL, 4,300 HRS ... ..........................................................................................................$26,900. 2006 JLG 600AJ 4X4, ART BOOM LIFT, CAT ENG, 4,500 HRS SALE OR RENT. 2004 GENIE Z80/60 4X4, DIESEL, 3,807 HRS, 80' LIFT ......... SALE OR RENT.
MISCELLANEOUS 2006 POWERSCREEN 1400 CHIEFTAIN 2 DECK SCREENING PLANT ON TRACKS, ONLY 2,200 HRS ..................................................................... SOON. NEW WACKER WP1550A 200LB REVERSIBLE PLATE, HONDA ................ POR. NEW WACKER BPU3050A 400LB REVERSIBLE PLATE, HONDA, WHEEL KIT ...... ................................................................................................................POR. NEW WACKER DPU6055HE DIESEL REVERSIBLE, 1,000LB PLATE .......... POR. NEW WACKER BS50-4 4 STROKE RAMMER, ONLY 145LBS .....................POR. 2004 FORD F750 LEDWELL 2,000 GAL WATER TANK, CAT C7 BERLEY 4"PUMP, FRONT, SIDE, REAR, HOSE REEL ............................................. SALE OR RENT.
USED BUCKETS, THUMBS, ATTACHMENTS, PARTS WELDCO BEALES 938G BUCKET, 3 1/2 YD, BOE, EXCELLENT COND ................ ........................................................................................................... $4,500. 2001 CAT 980G 980G BUCKET, 7.5 CUYD, 134" WIDE, 5,416LBS ..... $10,900. HITACHI ZX200LC-3 TAKE OFF CABIN ................................................ $9,900. NEW PC200LC-8 15.5 METER LONG REACH BOOM, ARM ................ $16,900. NEW ZX350LC-3 21 METER LONG REACH BOOM ARM & BKT .......... $34,900. NEW EXCALIBER X36 MECHANICAL THUMB ......................................... $650. NEW ERSKINE BOBCAT 72" SNOW/LIGHT MATERIAL BUCKET, BOLT ON EDGE ........................................................................................................... $1,850. NEW ERSKINE BOBCAT 84" SNOW/LIGHT MATERIAL BUCKET, BOLT ON EDGE ............................................................................................................$1,990. NEW ERSKINE BOBCAT 84" POWER ANGLE BROOM, POLY/STEEL WAFER ...... ............................................................................................................$4,800.
Page 8 Supply Post Western Canada Edition supplypost.com May 2015
Atlas Copco and An-glo American are set to test a new type of mining machine that the companies say will transform the extrac-tion process of ore from underground hard rock mines. The two com-panies have been co-operating in a research and development part-nership since 2012 and their combined efforts, which centre on me-chanical excavation technology, are now in an advanced stage with proof-of-concept testing scheduled to start in the fall 2015. According to the company, if all goes according to plan, it will be one of the most significant examples of innovative technology to emerge from Anglo Americans FutureSmart approach to mining.
Scott Barker, Presi-dent of Atlas Copcos Underground Rock Ex-cavation Division, said: We are very proud to be
Anglo Americans part-ner in this joint develop-ment project and we are excited at the prospect of demonstrating this potential game-changing technology to the mining industry.
Donovan Waller, group head of Technol-ogy Development at Anglo American, com-mented: Atlas Copco is a well-known supplier to the mining industry with more than 140 years of product development to its name. In addition, they share our vision that we need to work together for
the future benefit of the industry. Atlas Copco is therefore an ideal choice to partner with us on this exciting journey.
Speaking at the Das-sault Conference in Las Vegas, Nevada, last November, Waller ex-plained the philosophy behind the FutureSmart initiative:
We are looking for a radical transformation of the way we do things and that means taking a fresh approach, he said. An-glo American believes in seeing how technol-ogy can benefit entire systems, not just certain just parts of them. We also believe that the ben-efits to the industry as a whole can only be real-ized through openness and collaboration. b
POLLARD EQUIPMENTC H I L L I W A C K L T D . 604-793-2287
The ideal partner for your parts & repair needsAffordable, Dependable Parts & Service at our shop or at your job siteyou choose.
Serving The Lower Mainland and Vancouver IslandFor Parts & Service call 604-793-2287
www.pollardequip.com
1999 Hitachi EX300LC-512,700 HoursExcellent Undercarriage @ 9,000 HoursPumps @ 10,000 Hours2 Buckets & ThumbCatwalks & Heavy Panelling
USED EQUIPMENTUSED EQUIPMENT
SHOP SERVICEFullyTrainedTechnicians
FIELD SERVICEEmergency Repairs
PM Service
COMPONENTSNew & Reman EnginesTransmissionsPumpsDiffsBuckets
UNDERCARRIAGEPins & Bushings Track ChainSprocketsRollersPadsIdlers
UNDERCARRIAGEPins & Bushings Track ChainSprocketsRollers
The April 2015 issue, page 4, promoted a new Doosan DX170W-5 wheel excavator; however, that model is not available for sale in Canada. Doosan dealers in Canada sell three wheel excavator models:
DX140W-3, DX190W-3 and the DX210W. Please contact your local Doosan heavy equipment dealer for more information about these models, or visit www.doosanequipment.com. b
Correction
Advanced Testing Of New Underground Mining Equipment
CANADAS EQUIPMENT LEASING EXPERTS
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 9
A close relationship with your dealer meansdowntime wont keep you up at night.
S W.
Contact your local dealer:
Great West Equipment
Vernon, BC (Head Offi ce)250.549.4232
Campbell River, BC250.286.0123
Cranbrook, BC250.426.6778
Fort St. John, BC250.785.4223
Kamloops, BC250.372.3996
Nanaimo, BC250.716.8804
Prince George, BC250.612.0255
Surrey, BC604.882.5051
Terrace, BC250.635.9033
Williams Lake, BC250.392.9599
Whitehorse, YT778.870.6955
While power and precision are important, your equipment is only as good as its dealer support. From quick turnarounds to short notices, we have the right Volvo equipment to help you get the job done on time. Thats minimizing your risk with complete confidence and support, day in and day out. Talk to us today, or visit volvoce.com/smartpipeline.
You partner with a dealer that has your back no matter where the jobs take you.
Smart Works.
Contact your local dealer:
Dealer Name
City, ST123.456.7890
City, ST123.456.7890
City, ST123.456.7890
City, ST123.456.7890
City, ST123.456.7890
City, ST123.456.7890
City, ST123.456.7890
City, ST123.456.7890
City, ST123.456.7890
Dealer logo
173-1230 GWE_smartpipeline_MULTI_9.75x13.25_2.indd 1 1/15/15 8:54 PM
Page 10 Supply Post Western Canada Edition supplypost.com May 2015
1998 CAT 140H GRADER stk# K2044 5,036 hours,
$149,900
2008 CAT D6T LGP CRAWLER stk# K1840 7,767 hours,
$195,000
2002 CAT PS150B stk# K2226 645 hours,
$69,000
2009 CAT CP64 COMPACTOR stk# K2056 3,814 hours,
$95,000
2008 CAT D6T XL CRAWLER stk# K1847 4,618 hours,
$185,000
2009 KOMATSU HM400-2 stk# K2207 6,500 hours,
$270,000
2007 KOMATSU HM300-2stk# K2053 8,222 hours,
$225,000
2012 KOMATSU PC490 stk# K1942 4,508 hours,
$335,000
2008 CAT 928HZ stk# K2065 4,357 hours,
$119,000
OVER 190 PIECES FOR RENT NOW!CALL 1-888-594-1998
The Alberta govern-ments 2015/16 budget will help keep the provinces oil and gas industry competi-tive in a turbulent global market, supporting jobs and investment at a chal-lenging time, the Canadian Association of Petroleum Producers (CAPP) said April 2.
Albertans across the province are hurting with the drop in oil prices from rig workers and service crews, to head offices, small businesses and local corner stores, said CAPP president Tim McMillan. Now is not the time to put more cost pressures on industry.
Oil and natural gas com-panies have announced more than 4,500 direct layoffs in 2015, with an additional 23,000 jobs ex-pected to be lost as a result of lower drilling activity. Capital investment in the industry is forecast to de-cline more than $25 billion (33 percent) this year, from $69 billion last year to $46 billion in 2015.
The drop in oil prices has hurt our industry and it has hurt Albertas public finances. It would be irre-sponsible to put more jobs at risk. McMillan said.
We all must focus on protecting jobs and keep-ing Albertans working as much as possible.
According to Albertas budget documents, the oil and gas industrys pay-ments to the province are forecast to decline $5.9 bil-lion (67 percent) this year, from $8.8 billion last year to $2.9 billion this year.
Oil and natural gas pay-ments represent seven per-cent of total government revenue this year, a num-ber that is forecast to grow to 15 percent by 2020. In addition, the industry con-tributes about $1 billion annually in municipal tax-es and has paid nearly $500 million in greenhouse gas-related levies since 2007.
The oil and natural gas industry employs one in every six Albertans, with substantial related employ-
ment created in sectors such as hospitality, trans-portation, food services, consultation, construction and real estate. Each dol-lar invested in the oil and natural gas sector creates three dollars of value in Al-bertas economy across the province, particularly in ru-ral communities.
The global market for oil and natural gas invest-ment is extremely competi-tive. If we are going to con-tinue to grow Albertas oil and gas industry creating more jobs and increasing public revenues to improve our quality of life then we must keep Alberta attrac-tive for this future invest-ment, McMillan said. b
Alberta Budget Keeps Oil And Gas Industry Competitive
NEXT AD DEADLINE:
May 15, 20155:00 pm
EXCAVATOR PARTS FOR JD/HITACHI/CAT NEW/USED/REBUILT
TOLL FREE 1-855-559-9995
PARTS MACHINES EQUIPMENT FOR SALE
EVENINGS & WEEKENDS
WWW.VIEQUIPMENTLTD.COM [email protected]
PHONE 250-468-1000 CELL 250-951-1944
Cat 325D FM Hitachi ZX450 LC-3 JD 200C w/2 buckets,thumb, Q/C and cat walks.
8,200 hrs
$67,500
$139,000
$54,500
$74,900
$79,900
$51,900
Cat 345CL
Hitachi ZX240 LC-3
Hitachi ZX75 US Excavator (2010) 2,650 hrs.
JD 135C RTZ w/2 buckets, thumb, blade and Isuzu Engine
Hitachi ZX75 Excavator, 2 buckets, thumb & Q/C,
5,500 hrs
Caterpillar 330C FM Excavator, w/new grapple rotate motor
& Finning grapple. 15,000 hrs.
John Deere 85D Excavator, 2 buckets, thumb, blade &
Q/C, 3,880 hrs.
JD 270D
Hitachi ZX450 LC-3 Hitachi ZX270 LC-3 Hitachi ZX200 Hitachi EX200-2 John Deere 200C LC Hitachi ZX330 LC John Deere 200 LC John Deere 120 Cat 336E Cat 330CL Cat 330B Cat 314C Cat 320BL Cat 345BL Cat 325 Cat 330L Hitachi EX400
John Deere 270D Hitachi EX300-3 John Deere 892E LC Hitachi EX400-1 Hitachi EX220-3 Hitachi EX330 LC-5 John Deere 790E Hitachi EX200LC-3 Hitachi 270-5 Hitachi ZX330 LC John Deere 200 LC John Deere 892D John Deere 330 LC John Deere 690E John Deere 892E Hitachi ZX240 LC-3Hitachi ZX270 LC-3
John Deere 653E Feller Buncher Tigercat 870C
Feller Buncher John Deere 200C Forestry Machine
DISMANTLED EXCAVATORS
OTHER DISMANTLED EQUIPMENT
JD 350D
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 11
CONSTRUCTION EQUIPMENT SUPPORT EQUIPMENT
CONVEYORS SCREENS
SILOS LIVING QUARTERS
Page 12 Supply Post Western Canada Edition supplypost.com May 2015
Hyundai Construc-tion Equipment Ameri-cas, Inc. has announced the 2014 winners of the Hyundai Pinnacle Award, an honour bestowed on the companys leading construction equipment dealers in North Ameri-ca. In addition to earning a Pinnacle Award, Cisco Equipment, with two of the top 15 salespeople in the United States, was named top-performing dealer of 2014.
The other 2014 Hyun-dai Pinnacle Award win-ners, in alphabetical or-der, are: Four Seasons Equip-
ment, four locations in Louisiana, North Dakota and Texas,
May Heavy Equipment, locations in North and South Carolina,
Nueces Power Equip-ment, eight locations across Texas,
Robs Hydraulics Inc., two locations in North Carolina,
Team Boone, located in
Bardstown, Ky., andWoodland Equipment
Inc., five locations in BC.Thanks in large part
to the outstanding per-formance and industry-leading service of these seven Hyundai Pinnacle Award winners, we are confident that the Hyun-dai brand will continue to be a major player in the North American mar-ket, said Curtis Goettel, North American Market-ing and Dealer Develop-ment Manager, Hyundai Construction Equipment Americas. As true am-bassadors of the Hyundai brand, our dealer part-ners are excited about the direction Hyundai Construction Equipment Americas is headed, and we are very appreciative of their continued sup-port and loyalty.
The Hyundai Pinnacle Award program recognizes dealers based on such per-formance criteria as sales, wholesale gross and mar-ket share. b
Hyundai Announces 2014 Pinnacle Award Winners
www.inlandequipment.com [email protected] 150 Industrial Place, Penticton, B.C.
MANY MORE PIECES OF EQUIPMENT IN THE YARD FOR SALE FINANCING & RENTAL PURCHASE AVAILABLE
WILL PURCHASE QUALITY USED EQUIPMENT TRY YOUR OFFER, NO REASONABLE OFFERS REFUSED
Call Vic Kampe For Details Ph: (250) 493-6791 Fax: (250) 492-2762www.inlandequipment.com [email protected] 150 Industrial Place, Penticton, B.C.
HAVE UNDERBODY BLADES, GRAPPLES & BUCKETS, FRONT PLOWS
BACKHOE/LOADERS/ EXCAVATORS/FORKLIFTS1998 JCB 930 Rough Terrain Forklift, 28', 3 stage,
side shift, 6,000 lb, Perkins diesel ..................... Call.1990 Cat 426 Backhoe, 4x4, ext. hoe .................. Call. 1968 Cat 950, bucket machine ............................Call.1996 Skytrak 5028 HiTorque, 5000 lb .......... $24,000.2004 Terex TX760B, A/C, ext. hoe, 4x4, aux. hyd.,
new tires, 2300 hrs ..................................... $45,000.2006 Patrick AR10C, 20,000 lb 4x4 forklift, 2 stage
side shift, air brakes, 13' lift, 17.5 x 25 tires, good .........................................................................Call.
CRAWLERS/WHEEL LOADERS/SKID STEERS(2) 2006 Bobcat T190s, new tracks, 1675 hrs ..........Call.2000 Bobcat 773 with 4,200 hrs ...................$13,500.2003 Bobcat 763, 2,500 hrs, 3 to choose ............Call.2012 Bobcat T650, 1465 hrs, closed cab, A/C, heat,
hand and foot controls, floats, hyd detach, bucket leveler. .......................................................$45,900.
1998 Cat IT38G, Q/C 90% tires ...........................Call.1969 Cat 950 Loader, 50% tires .........................Call.1995 Cat 950F Series II, bkt machine, 40% tires....Call.1972 Cat 966C, bkt machine, 3rd valve ......... $29,000.2007 Cat 972H, 4,575 hrs, 26.5 x 25 tires @ 40%,
6.25 yd bucket with edge ..................................Call.1994 Cat 966F, 26.5 x 25 radials @ 50%, E. steer,
bucket w/teeth, A/C, ride control ................$78,000.2004 Cat 287 Skid Steer, rubber tracks, 1300 hrs ....... Call.1993 John Deere 624G, bucket machine ............ Call.1983 John Deere 644C, bkt machine ........... $21,000.
GRADERS & DOZERS2005 John Deere 772CH, 9,286 hrs, 17.5 x 25 ice
radials @ 90%, floats, 14' MB, 2' ext. ripper (wing & dozer available) ......................................$89,000.
2004 John Deere 772CH, 7,600 hrs, 17.5 x 25 radials @ 50%, ripper (wing & dozer avail.) ..........$89,000.
2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ....................................Call.
2006 Cat 14H, c/w ripper, 20.5 x 25 tires ............Call.1990 Cat 140G, c/w ripper, push block, 14' MB,
accum. floats ....................................................Call.(2) 2001 Cat 140H Graders, 14' MB, Low Pro cab, ripper Call.1995 Cat 160H VHP, c/w ripper ........................... Call.2003 Cat 160H, 12,500 hrs, eng. done 9,900 hrs,
trans done 11,500 hrs, W/Os available, ripper & wing available .................................................... Call.
Used Huber Maintainer/Grader ........................... Call.1998 Champion 740A VHP Motor Grader ............ Call.2010 Cat 160M, 16' MB, circle clutch, accum., A/C,
fenders, spare valves ......................................... Call.2008 Cat 160M, 14' MB, ripper, 8,200 hrs, accum.,
A/C, 14 x 24 tires @ 75%, wing avail., ripper..... Call.1976 John Deere 570A ........................................ Call.1980 John Deere 570A, 12' MB ........................... Call.1992 John Deere 770BH, 14x24 tires 95% .........Call.
BELLY DUMPS, LOW BEDS & TILT TRAILERS
(3) 2012 7 Ton 24' Trailers, c/w 4' sides & ramps ... Call.2015 Trailmax 27 Ton Triaxle Tilt Deck, 25' tilt, 5'
stationary .................................................... $36,900.1993 Trailmax T/A 21 Ton, tilt w/paver ramps ............
................................................................... $16,900.1993 Trailmax 20 Ton, tilt w/paver ramps .... $15,900.1989 Beall Tri-Axle Super Single Pup Trailer, alloy
wheels, alum. box, 15' tarp ............................... Call.1998 Loadline 14' Gravel Pup, tarp, 85% rubber
................................................................... $21,900.1990 Peerless T/A Lowbed, c/w booster, detach, neck
ext. 8'6" x 21' deck, new paint ........................... Call.1991 TrailKing 50 Ton Tridem, 8'6' x 25' deck,
detach, beaver tails, A/R susp, narrow neck, set up for neck ext. new paint ...................................... Call.
1989 TrailKing, 20 ton equipment trailer ............. Call.1994 Dorsey 53' Tri Axle Reefer Van ............. $8,500.2009 Felling FL-20PT, 10T, elec. brakes ............. Call.1995 CZ, 12 ton trailer, Budd wheels ...................Call.1995 14' Midland gravel pups, good tires ...........Call.1983 14' Gravel Pup ............................................Call.
ROLLERS/PACKERS/CRUSHING & PAVING(2) 1995 Ingersoll Rand 910T pavers, 4,400 hours,
10x16 screed ......................................... $15,000 Ea.(2) 2006 Ingersoll Rand SD25F, 42" padfoot and
smooth drum ..................................................... Call.1998 Dynapac CA152D, 66" smooth drum, 2580 hrs,
Cummins engine ............................................... Call.2007 Terex 693T SuperTrak Screen Plant, 5' x 20',
3 deck ...............................................................Call.2005 Powerscreen 5032 Stacking Conveyor ......Call.2004 Terex Finlay 683 5 x 12, 2 deck screener ......Call.2007 Astec 4 x 7, 2 deck screenplant, 1,140 hrs, like
new ...................................................................Call.2003 Sakai SV500D Vib S/D Roller, 84" ............. Call.
TRUCKS
2006 Freightliner M2 T/A Water Truck, 4,000 gal. Cat C7 engine, 9 spd 3" Berkley pump, front, rear and side spray, 53,000 miles ................................... Call.
1991 Freightliner FLD112645T T/A, alum. tank, 2,500 gal. (potable water), 24,500 km, 725 hrs, A/T ..Call.
2007 Peterbilt 335, T/A, 4,000 gal, Cummins 315 hp, 10 spd, 20,000 front, 46,000 rears, 3" pump, front, rear and side spray, inter axle lock....................Call.
(2) 2013 Ford 750 S/A Water Trucks, front, rear, and side spray .........................................................Call.
2001 Freightliner FL70, Berkley PTO pump... .........Call.2003 Cat 735 Rock Truck, heated box, tailgates, A/C,
E-steer, diff. lock ...............................................Call.
MISCELLANEOUS
(6) 2009 Club Car Golf Carts, electric ............$2,100.Front Lift Groups for 140H-160H-140G Graders ....Call.1999 Ford E450 Ambulance, 4x4 diesel ..............Call.1999 Ford E450 Ambulance, 7.3 Ltr. 4x4 ....$12,900.2001 Ford Cube Body Ambulance ................ Call.NEW 48" sweeper for Bobcat ....................... Call.1999 Ford E350 Ambulance, auto trans, power
window, A/C, cruise ..........................................Call.Buckets for 980 & 966 C, F & G ........................... Call.644H John Deere Bucket ..................................... Call.Forks for 966C ...................................................... Call.32" Dig Bucket CWS Q/C for John Deere 200 ...... Call.48" Dig Bucket CWS Q/C ...................................... Call.32" Lynn Pin on Hitachi 200 Size ........................ Call.Cat & John Deere Snow Wings .............................Call.
TOLL FREE: 1-800-663-8210 | OFFICE: 250-963-6600 | CELL: 250-961-0279| FAX: 250-963-8822 | [email protected]
www.pennersheavyduty.comWE ARE CONNECTED TO OVER 800 DEALERS WORLDWIDE: LET US FIND THE PARTS YOU NEED!
MAKE US YOUR FIRST SOURCE FOR ALL YOUR CATERPILLAR PART NEEDS!
CAT D7G W/RIPPER CAT 140G GRADER
IT12B LOADER 920 LOADER 930 LOADER D7E DOZER D9G DOZER
HEAVY DUTY PARTS & SERVICE
3000 MAGREGOR ROAD, PRINCE GEORGE, BC V2N 6E2
CAT D8KCAT 14E GRADER
CAT 325L
C/W DOUBLE ANGLE BLADE AND C-FRAME AND TWO BARREL RIPPER ... P.O.R.
CAT EL300
FOR SALE
CALL US TOLL FREE 24 HOURS A DAY, 7 DAYS A WEEK
WRECKING
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 13
EQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYEQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURYCRUSHERS SCREENERS TROMMELS STACKERS
www.mormak.com
BC ONLY
EQUIPMENT IN STOCK
CALGARY, ALBERTA8815 44th St. SE
PH: (403) 203-2644FAX: (403) 203-2646
VERNON, B.C.8140 Becketts Rd.
PH: (250) 542-7350FAX: (250) 542-0571
CHILLIWACK, B.C.7912 Atchelitz Rd.
PH: (604) 795-7511FAX: (604) 795-7501
2 SIDE GRIP VIBRATORS AVAILABLE FOR EXCAVATORS IN THE 20 TONS AND LARGER WEIGHT CLASS
PICKING UP, POSITIONING AND DRIVING PILES IN EXCESS OF 35 FEET LONG IN A SINGLE OPERATION.
OTHER EXCAVATOR AND CRANE MOUNTED VIBRATORS AVAILABLE.
S I D E G R I PV I B R A T O R S
MAGNUM ATTACHMENTS WILL GIVE
THE WORKING END OF YOUR MACHINERY
SUPERIOR PERFORMANCE AND DURABILITY.
71 STEINWAY BLVD, TORONTO, ON M9W 6H6
416.679.8752 | 1.877.640.2862 | FAX 416.679.8753
Terex Aerial Work Plat-forms (AWP) created a whole new look for The National WWII Museum in New Orleans during the 2015 Rental Show. The 100 foot tall outdoor facade was transformed with a specialized and astounding projection mapping ani-mation that was three di-mensional and very blue
The 3D experience, celebrating the launch of several new products in the Genie GTH telehandler family, was projected on the seven-story wall of The National WWII Museums US Freedom Pavilion: The Boeing Center during the Genie customer apprecia-tion party. The architecture of the Museum and the ma-terial of the wall lent itself exceptionally well to the high-tech show.
The Genie 3D experi-ence was exceptional and really entertained and
impressed our guests, said Karen Stash, Senior Director of Global Market-ing and Product Manage-ment, Terex Aerial Work Platforms. The 3D effect absolutely transformed the 100 foot museum wall to visually tell the story of our full line of telehan-dlers.
The Genie team col-laborated with The Pro-duction Network and Go2 Productions of Vancou-ver, Canada to produce the event. It took four art-ists a total of 750 hours over the course of three weeks to complete the custom animation. The partys 450 guests were excited and impressed by the towering blue display, which introduced the full Genie telehandler family and its new products to the crowd.
3D Projection Mapping is a projection technol-
ogy used to turn objects/architecture, often irregu-larly shaped, into a dis-play surface for video pro-jection. These objects can range in complexity, but usually involve buildings, vehicles, custom built sets and complex industrial landscapes. By using spe-cialized software, Cinema 4D, a two- or three dimen-sional object is spatially mapped on the virtual program which mimics the real environment it is to be project on. From there, 3D animators add extra dimensions, opti-cal illusions and notions of movement onto the previously static object, which is later re-projected onto the object to create a unique 3D experience.
The location was great, because it allowed a perfect spot for the projec-tors to be placed, across from the event location on the roof of a building. This allowed us to place the projectors in a sweet spot, which heightened the illusion of the map-ping experience for the audience down below partaking in the event, said Adrian Scott, Cre-ative Director, Go2 Pro-ductions. b
Six Genie Telehandlers, One Unbeatable Team
NEXT AD DEADLINE: May 15, 2015 5:00 pm
Page 14 Supply Post Western Canada Edition supplypost.com May 2015
Atlas Copco unveiled several pieces of equip-ment during its March dealer event in Phoenix. The event introduced many models of At-las Copco construction equipment, including the CT3000 tamping soil compactor, the CP1200 and CP2700 pneumatic tired asphalt rollers and the intelligent compaction system. Atlas Copco held the event to give dealers a first-hand look at the new products, technologies and sales tools.
Having people see our new equipment and tech-nology in action shows that were committed to rein-forcing our customer sup-port, said Brian Bieller, Atlas Copco vice president and road construction equipment business line manager. The best way to accomplish that is to roll them all out at once and demonstrate their capabili-ties.
Dealers had the op-portunity to climb aboard
the equipment and take some of the latest models for a test spin. They also learned about some of the new technology Atlas Copco is launching, includ-ing its intelligent compac-tion system, which will be available on Atlas Copco CC2000 through CC6200 asphalt rollers and CA2500 through CA6500 soil roll-ers.
Atlas Copco previewed its new, easy-to-use intel-ligent compaction system during the event. The IC system gives contrac-tors and equipment op-erators real-time mate-rial stiffness readings to ensure superior soil and asphalt compaction. For instance, the IC system allows operators to view their progress and ensure accurate pass counts. From a quality assurance standpoint, its saves con-tractors significant time and money because they can pull real-time data to prove that the work site received consistent
compaction. The system features a touch screen that is easy to navigate and read, making it user-friendly and convenient. And it will be equipped with Atlas Copcos Dyn link fleet management system, which contributes to equipment wellness and theft deterrence.
The event also allowed dealers to experience op-timal operator comfort and visibility with the equipment a hallmark of Atlas Copcos Road Construction division. For instance, The CT3000 features padfoot drums mounted on rubber tires to effectively absorb im-pact during operation, which minimizes vibra-tions to the cab to create a more comfortable ride. Several rollers, includ-ing the new CP1200 and CP2700 pneumatic tired asphalt rollers, feature a rotating seat, giving the operator a clear view of the drum edge for better precision. Spacious plat-forms and dual swing-out seats enhance visibility and operator comfort on the new F1000T paver benefits that are key to ef-ficiency, productivity and profitably. b
Atlas Copco Previews New Equipment, Intelligent Compaction System
SALES & RENTALS SCREENERS CONVEYORS CRUSHERS AGGREGATE EQUIPMENT
621 MCCLOSKEY TROMMEL SCREENERPerfect for Topsoil, Compost, Sand, Removable Drum for Screen Change, Great Condition Used Unit Shown!
18 CUBIC YARD FEEDER36" to 42" Discharge, Adjustable Grizzly, Hydraulic Grizzly and Hydraulic Tilt.
J40 MCCLOSKEY JAW CRUSHER 40 x 24 Jaw Open-ing, Remote Control Track Mobility, New or Used Available.
42" x 60" TRANSFER CONVEYOR Air Brakes, Lights, Mudfl aps & 5th Wheel Towable.
R155 & R230 MCCLOSKEY SCREENERS Great Unit for Heavy Duty Applications, Use Punchplate, Fingers or Bofar Bars, New & Used Units Available.
2014 MCCLOSKEY 36" x 80" Conveyor w/Hyd.Axle Jacks & Ext., Hyd. Raise & Lower, Hyd. Top Fold & Land-ing, Road Legal w/Air Brakes & Lights, Diesel or Electric.
MCCLOSKEY C38R CONE CRUSHERSelf Contained Closed Circuit Plant W/Screendeck.Pairs Perfectly With An S Series Screener. Available For Sale Or Rental.
CLOSED CIRCUIT CONE CRUSHING PLANT51 Trio Cone Crusher 6 x 20 Trio Triple Deck Screen.Comes with run on Jack Legs and all Required Switch gear.
In House Financing now available! Flexible terms and conditions.Call Tyalta Finance today at 1-877-550-0016 fi [email protected]
1-800-960-9939Fax: 403-946-5191 Email: [email protected] Head Of ce: Cross eld, AB, 403-946-4860
www.tyalta.com
CALL US TOLL FREE
TYALTA GRIZZLY Handles Heavy Duty Rip Rap Material, Adjustable Grizzly Bars 3 to 24 Spacing, Easily Transported with a Loader.
GREAT NEW AND USED INVENTORY!
604-850-3601 ext. 226Henry: (604) 850-4654 www.handlersequipment.com
FTS CHASSIS MOROOKA DUMPERS & PARTS
CUSTOM CHASSIS
Sizes from 511 ton 5' 8' wide
We custom build FTS Chassis to fit any criteria for mounting engines, pumps, most drills, rock slingers, water bombies and more.
Give us a call and we will design your new rubber track carrier chassis!
DUMPERSWe sell all sizes of Dumpers, new or used from 5000 lb capacity all the way up to 22,000 lb payloads. We also rent by day, week or month. Please visit our website for rental rates and complete list with prices.
MOROOKA PARTSMorooka Parts for every model from manuals to tracks. We also rebuild pumps and drives in our shop.
Give us a call for any part you need!
COMPETITIVE PRICING!
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 15
INDUSTRIAL L.E.D. FOR
DURA VISION 60W L.E.D.
CALL US TOLL FREE:1 855 897 7400VISIT US ONLINE AT:EARTHTRACKGROUP.COM
FEATURES Waterproof, 50,000 hour life, 25G rms vibration rated,
built tough with impact resistent lens & low power draw.
Available in Flood Beam, Wide Flood Beam, and Euro Beam.
Simply drive-through for accurate load measurement. Eliminate operator error and inaccuracies. You can even measure haul-backs to be removed from load data. Dont give your product away, know your load. Available in mobile, fixed and wall-mount.
Performance Optical Belt Scale for discharge conveyors measure the volume of material coming off the conveyor. Data transits directly to your hand held computer unit in real time. Can you afford to be guessing your production per hour?
LOAD VOLUME SCANNER
SCAN HEREto see it in action!
SCAN HEREto see it in action!
1(855)[email protected]
CALL US TOLL FREE:EMAIL:
VISIT US ONLINE AT:
RENTALS | NEW & USED EQUIPMENT SALES | OUR BRANDS:
VISIT US AT BOOTH #513
ENTER TO WIN A SPORT FISHINGTRIP FOR TWO
MAY 29 & 30CN CENTRE, PRINCE GEORGE
ACCURATELY MEASURE FOR MAXIMUM REVENUE
Page 16 Supply Post Western Canada Edition supplypost.com May 2015
2009 CAT 140M LOW CAB, RIPPER 5707 HRS $189,000
2008 CAT 140M 1 WAY PLOW,WING,X MUNIPAL 7500 HRS $185,000
2008 CAT 160M BAREBACK, AIR RIDE,DIFF LOCK 7804 HRS $195,000
1987 JD 670B BAREBACK, 14R24 RUBBER 8785 HRS $50,000
1995 JD 770BH TALL CAB, 2' EXT, HVAC 12475 HRS $50,000
2002 JD 770CH TALL CAB,AC,S.WING,14'MD,2'EX 7989 HRS $80,000
2006 JD 770D TALL CAB,14'MLDBD,2'EXT,S WG 13259 HRS $95,000
2007 JD 770D C/W DOZER, WBM WING,RIPPER 11182 HRS $120,000
2007 JD 770D L.CAB,S.WING,14'MLDBRD + 2' 7689 HRS $135,000
2010 JD 770G 2FT EXT,SNOPLS TIRES,BAREBACK 4299 HRS $178,000
2010 JD 770G LOW CAB, BAREBACK 6339 HRS $189,000
2011 JD 770G LOW CAB, BAREBACK, STD CTRLS 2602 HRS $179,000
2011 JD 770G BAREBACK,14'+2' EXT, F/R FNDR 5629 HRS $179,000
2011 JD 770G BAREBACK, STANDARD CONTROLS 4743 HRS $179,000
2010 JD 770GP C/W WING,HYD ANGLE BLADE,V-PL 6800 HRS $190,000
2010 JD 770GP GP,BAREBACK,14'+2'EXT,F/R FDR 5328 HRS $199,000
2009 JD 772D BAREBACK, S.WING,BALANCE WTY 6176 HRS $185,000
2012 JD 772G RIPPER, 14+2 EXT MOLDBOARD 4488 HRS $289,000
2013 JD 772G WING, RIPPER, ESPAR, PAS 1200 HRS $335,000
2010 JD 772GP C/W V-PLOW,WING,ONE WAY PLOW 7200 HRS $208,000
2007 JD 870D T CAB,16' MB,SLIP CLUTCH,REBLT TRANS 7066 HRS $130,000
2010 JD 870G WING,RIPPER,PUSH BLOCK,SNO TIRES 7222 HRS $177,000
2007 JD 872D REAR RIPPER,PUSH BLOCK,14' MLDBRD 7488 HRS $139,000
2007 JD 872D C/W 17.5 TIRES,AWD 14" MLDBRD 5000 HRS $189,000
2009 JD 872G LOW CAB, RIPPER,14+2 MLDBRD 7585 HRS $209,000
2010 JD 872GP C/W WING,HYD ANGLE BLADE,V-PL 6053 HRS $239,000
2010 JD 872GP C/W V-PLOW,WING,ONE WAY PLOW 6316 HRS $238,000
2011 JD 872GP CAB W/AC,LOW CAB,EH CONTROLS 4013 HRS $363,000
2013 JD 872GP W/CAB, AC, RIPPER, PB 1526 HRS $369,000
2004 VOLVO 730B SNOW GATE,12 & 14' MLDBRD 7158 HRS $95,000
2009 VOLVO G940 BAREBACK, 2' EXT, LOW CAB 5700 HRS $105,000
2011 VOLVO G960 LOW CAB, 2 FT EXT, FENDERS 4291 HRS $149,000
2012 VOLVO G960B C/W WELDCO MASTED WING,17.5 3850 HRS $169,000
2012 VOLVO G960B 14'+2', 17.5R25,11 SPD TRANS 5072 HRS $159,000
1984 CASE W36 PIN ON BKT,23.5R25 TIRES 13000 HRS $35,000
2012 CAT 906H CAB HEAT/AC,AUX HYD,2.1YD GP 711 HRS $77,000
2013 CAT 906H CAB HEAT/AC,AUX HYD,2.1YD GP 181 HRS $97,000
2012 JD 244J LOW HOURS,BOOMLOCKS,INSTL 904 HRS $90,000
2011 JD 304J CAB,HEAT,AC,WP,CPLR,1YD BKT 3801 HRS $85,000
1998 JD 444H A/C,AIR SEAT,R/C,AUTOSHIFT,HT 10300 HRS $58,000
2009 JD 444K 20.5R 25 TIRES,FENDERS,PIN ON 5928 HRS $115,000
2009 JD 524K Q/C,GRAPPLE BCKT,RIDE CNTRL 5613 HRS $129,000
2005 JD 544J PIN ON BKT, SKIDDER TIRES 20355 HRS $53,000
2009 JD 544K CAB,AC,CLTH ST AIR SUSP,ZBAR LINKAGE 3931 HRS $145,000
2014 JD 544K NEW TIRES,3.0YD BKT,COUPLER 975 HRS $172,000
$99,0002012 JD 135D 6367 HRS EXCAVATOR
$125,0002008 JD 160DLC 6366 HRS DIG,QA,AUX HYD
$115,0002010 JD 200DLC 7795 HRS COUPLER
$75,0002006 JD 270C 7896 HRS DIG,CLEAN COUPLER,WALKS
$165,0002009 JD 270D 6543 HRS QA, DIG, TILT
$60,0002006 JD 160C 9997 HRS 2 BUCKETS,GOOD SHAPE
$95,0002007 JD 200D 7723 HRS 28 TRIPLE GROUSER
$115,0002008 JD 225D 6363 HRS QA,DIG BKT
$69,0002002 JD 270CLC 10986 HRS CWS LUGGED MAN WEDGE CPL 42
$168,0002009 JD 270DLC 5443 HRS Q/C, 2 BUCKETS
Used Equipment Clearance1-888-227-2638 | [email protected] | www.brandtused.ca
Call Brandt Finance at 1-855-711-4545 to find out more about our customized, flexible financing options.
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 17
TOP GRADE PRECISION.
brandt.ca 1-888-227-2638
Topcon 3D-MC Machine Control available from Brandt Positioning Technology Division allows you to complete even the most complex surface grading faster and with more precision than ever before. Every Topcon 3D-MC system includes upgradable Topcon components, and an easy-to-use operator interface. It also has the ability to nearly eliminate grade stakes, significantly increasing jobsite productivity. By integrating the pinpoint accuracy of the rapidly expanding Brandtnet GNSS RTK network and Topcons innovative line of lasers, unmatched productivity and material control has never been easier. Thats Powerful Value. Delivered.
FINANCINGCUSTOMIZEDAND FLEXIBLE CALL BRANDT FINANCE AT 1-855-711-4545TO FIND OUT MORE ABOUT FINANCING OPTIONS.
Page 18 Supply Post Western Canada Edition supplypost.com May 2015
Check out
our website!
Own or Rent
Attachments & M
ore
Hydraulic Hammers Hopacs Primary & Secondary Pulverizers Crusher Buckets Vibrorippers Blowers & Dust Suppression Excavators with Attachments Plumbing Kit ComponentsWe have Wacker Neuson Products!
CALL TODAY!
1-877-255-9293 604-888-9020 vanedequipment.com
The Ditch Witch orga-nization announces the release of the MV800, a low-cost, compact and durable vacuum excava-tor designed specifically for clean-up on horizontal directional drilling (HDD) jobsites.
Featuring the heavy-duty, field-proven compo-nents that keep all Ditch Witch vacuum excavators performing strong year af-ter year, the MV800 is built for the punishing condi-tions common to HDD job-sites. A commercial-grade, 31-hp (23.1-kW) Briggs & Stratton Vanguard gas en-gine powers the MV800
and features an electric start and a high-capacity, remote air-intake filter that helps maximize perfor-mance.
The MV800s filtration system includes an inte-grated carryover chamber that eliminates contami-nants before they reach the blower, increasing efficien-cy and reducing downtime.
The MV800 is equipped with an 800-gallon (3028-L) spoils tank that is an ideal size for HDD drill-ing fluid clean-up jobs. With its optional reverse flow feature and optional hydraulic opening door, spoils removal is simple
and efficient. The MV800 also offers an optional wa-ter system with a 100-gal-lon (379-L) water tank and adjustable pressure up to 3,000-psi (207-bar) for soft excavation tasks such as potholing utilities.
Like all Ditch Witch equipment, the MV800 is designed for simple opera-tion. Its standard curb-side controls enable one-person control of all functions and promote jobsite safety. Other standard safety fea-tures include a strobe light, belt guards and mechanical locks on all lift cylinders.
The entire MV800 system fits on a custom-ized, 14,000-lb (6350-kg) GVWR trailer that is com-pliant with Federal Motor Vehicle Safety Standards and includes high-visibili-ty marking and an impact guard. b
Ditch Witch Introduces MV800 Vacuum Excavator
Your Source for Pre-owned Logging equiPmentForesTech equipmenT
VisiT our websiTe For our Full inVenTory: www.ForesTech.ca ContaCt: tim LLoyd 250-703-3551
4335 barge Terminal rd. campbell riVer, bc
Yarders Cypress 7280B Swing Yarder c/w: Grapple, lines, 70 boom, cab, Cummins eng., T-Mar screw comp. update, 45 gantry, 2 guy lines, mounted on Cypress hyd. drive carrier w/ 32 DBP. Price reduced to ...............$524,500
1989 Madill 122 Swing Yarder c/w: Grapple, lines, 60 roller boom, split cab, Cummins eng., two guy lines, mounted on Madill 087 hyd. carrier with 28 TBP. ........... ...........................................................................$449,500
Log Loaders1996 Hitachi EX300LC-3 c/w: CWS grapple, heel rack, LL front, elevated side entry tilt cab, forestry guarding package w/ aux. fuel tank, high walker undercarriage w/ 28 TBP. ..............................................................$29,500
Processor
1999 John Deere 330LC c/w: 1999 Waratah HTH24 processing head w/ top saw, thumbnail rollers, butt saw, LL front, elevated rear entry cab, forestry guarding package, highwalker undercarriage w/ 30 pads. Price reduced to ................................................ $74,500
graPPLe skidder 2001 Tigercat 630B c/w: Decking blade, ROPS cab, 30.5-32 tires, (Eco chains on front, double diamond on rear) dual function arch w/ grapple .............................. $34,500
Log Trucks
1979 Pacific P-16 T/A Conventional c/w: Cat 3408 eng., Allison 5960 auto. trans., spring susp., Clark #91,000 rear planetary axles, 14:00X25 tires, 14 log bunk on turntable. ............................................................................. $59,500
Kenworth 850 T/A Conventional c/w: 12V71, Allison 5950 auto trans., spring susp., Clark #91,000 rear planetary axles, 14:00X25 tires, 14 log bunk on turntable .. $59,500
craWLer TracTor 1989 Cat D4C c/w: 6 way dozer, sweeps, ROPS canopy, screens, winch, 16 SBP. ..................................... $18,500
HYdrauLic excavaTors
2005 John Deere 370C c/w: two bkts, Q/C, hyd. thumb, hoe front, BMI cab guard, catwalks, under guarding, belly pan, standard U/C w/ 28" double bar pads. 8,9XX hrs. ..... ............................................................................. $76,500
2004 John Deere 3554 c/w: dig bkt, CU bkt, grapple and heel rack, hyd. Q/C, hyd. thumb, hoe front, forestry cab on 8 riser, forestry guard. pkg w/ aux. fuel tank, high walker U/C w/ new 28 DBP. Recent work orders. ........ $109,500
2001 Hitachi EX330LC-5 c/w: dig bkt, hyd. Q/C, hyd. thumb, aux. hyd., hoe front w/ high lift kit, forestry guarding package w/ aux. fuel tank, 28 DBP. .....$37,500
2000 Hyundai Robex 170W-3 Mobile Excavator c/w: dig bkt, Q/C, hyd. thumb, (2) aux. hyd., hoe front, cab guard, Cummins eng., mounted on Hyundai hyd. drive two axle carrier w/ hyd blade & (2) outriggers ................... $32,500
1999 Kobelco SK400MkIVRB c/w: dig bkt, Q/C, hyd. thumb, hoe front, Cummins engine, forestry guard. pkg w/ aux. fuel tank, high walker U/C w/ 30 TBP. ... $59,500
Marine sorTing equiPMenT
15 Rendell Shallow Draft Sidewinder c/w: Cummins eng., Olympic drive, half cab. .............................. $39,50013 West Coast Sidewinder c/w: 4-53, Olympic drive, half cab, T/A trailer ..................................................... $35,000
Misc. Trucks
Hayes HDX T/A Truck & Columbia DAM100 T/A Lowbed c/w: 12V71, Allison 5960 trans., spring susp., Clark #91,000 rear planetary axles, 14:00X25 tires, log bunk hitch, 12' W x 22' L deck, 8 wheel susp., KB axles, Dayton wheels, 14:00X25 tires. ........................................... $CALL
Pacific P510 T/A Truck & Columbia T/A Lowbed c/w: Cat 3406, 15 speed, RB susp., 11R24.5 tires, fifth wheel hitch, wide neck, 186"L x 86" W deck, WB susp., Budd wheels, 10:00X20 tires. .................................................... $29,500
1989 Kenworth C500 T/A Dump Truck c/w: Cat 3406, 18 spd, spring over walking beam susp., 15 dump box. ........ ............................................................................. $34,500
1978 Kenworth T800 T/A Dump Truck c/w: Cummins eng., 15 speed, spring over WB susp., 166 dump box. ... ............................................................................... $9,500
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 19
Newmont Mining Cor-poration (NYSE: NEM) (Newmont or the Company) announced that it will build the first phase of Long Canyon, an oxide mine with sig-nificant upside potential in an emerging gold dis-trict located less than 100 miles from its existing Ne-vada operations.
The first phase of de-velopment consists of an open pit mine and heap leach operation with ex-pected gold production of between 100,000 and 150,000 ounces per year over an eight year mine life at an estimated all-in sustaining cost of between $500 and $600 per ounce. At current gold prices, the project is expected to gen-erate around $100 million in EBITDA annually, be-ginning in 2017.
Taking a phased ap-proach to developing Long Canyon gave us the means to lower development capi-tal to between $250 million and $300 million; generate
an internal rate of return of about 17 percent at current gold prices; and reduce the payback period to just over four years after first commercial production, which we expect to reach in the first half of 2017. Im confident that we have the engineering, ore body knowledge and community agreements in place to de-liver this project safely, on time and on budget, said Gary Goldberg, President and Chief Executive Offi-cer.
The project will be fund-ed through free cash flow and available cash bal-ances, and leverage New-monts existing equipment, infrastructure and person-nel. Capital expenditures will be allocated roughly equally in 2015 and 2016, with minimal spending in 2017. Project highlights in-clude:High grade oxide ore pro-
cessed by heap leachingGold reserves of 1.2 mil-
lion ounces at an average grade of 2.29 grams per
tonne and highly pro-spective mineralization over a three mile strike length
Estimated annual gold production of between 100,000 and 150,000 ounces over an eight year mine life for the first phase of operation
Estimated average costs applicable to sales of between $400 and $500 per ounce and all-in sus-taining costs of between $500 and $600 over the life of the mine; in the lowest cost quartile for gold production
Leveraging 50 years experience operating in Nevada by relying on ex-isting equipment, infra-structure and personnelFederal and state per-
mits necessary to proceed with development of the project have been secured following a 36-month study and public comment period. Once in operation, Long Canyon Phase 1 is expected to directly em-ploy about 260 people. Newmont will continue to engage and partner with local and regional stake-holders throughout con-struction, operations and closure.
Newmont To Build First Phase Of New Long Canyon Mine
Continued on page 20
Fuel burn is just the tip of the iceberg. Succeeding today means a whole new way of thinking. It means asking hard questions like: Are your machines operating with the highest fuel efficiency possible? What is operator comfort and machine durability worth? Will your dealer be there for you at critical moments? And how do these things make you more productive? At Finning, answers are our business.
*Program applies to select Caterpillar 311F, 312E, 314E, 316E, 318E, 320E, 321D, 323F, 324E, 326F, 328D, 329E, 329F,335F, 336E, 336F, 336F XE, 349E, 349F, 352F Hydraulic Excavators, 730C, 740B/745C Articulated Trucks, 950M, 962M, 966M, 972M, 980M, 982M Medium Wheel Loaders, D6 K/N/T, D7E, D8T Dozers, 140M3, 140M AWD, 140M2 AWD, 140M3 AWD, 160M, 160M2, 160M3, 160M AWD, 160M2 AWD, 160M3 AWD, 14M Motor Graders. See your Finning Sales Representative or visit finning.ca for further information on Finning Fuel Guarantee , Visionlink and Cat EMSolutions. Finance programs may vary over the promotion period. Demo program available at select Finning branches. Promotion runs from February 1, 2015 to December 31, 2015. Finning Canada reserves the right to modify or cancel the program at any time.
TRY BEFORE YOU BUY DEMO PROGRAM
THE FINNING FUEL COMMITMENT
3 YEAR VISIONLINK SUBSCRIPTION
Page 20 Supply Post Western Canada Edition supplypost.com May 2015
Newmont strengthened its underlying business in 2014, lowering consoli-dated gold all-in sustaining costs by approximately 10 percent or $100 per ounce
and ending the year with early $6 billion in liquidity. The Company also gener-ated $1.4 billion in the sale of non-core assets over the last two years. Continued strong performance is ex-
pected to generate posi-tive free cash flow over the next three years, and pro-vide the means to invest in profitable growth, pay down debt and return cash to shareholders. b Trelleborg, Sweden is
committed to reducing its own carbon footprint and those of its customers, and it is investing considerable resources to do so. Trel-leborg Wheel Systems un-dertakes intensive research and development work together with the main tractor original equipment manufacturers, prompting sustainability consultants such as PE International, as well as the top agricul-tural schools in Europe, to create solutions that make a difference.
A major breakthrough came with the launch of the TM Blue tire concept to help farmers boost their productivity and at the same time reduce their en-vironmental footprint.
Cultivation accounts for more than 50 percent of the carbon footprint in the production of wheat and other cereals, and is therefore an important fo-cal area as both consumers and farmers look at ways to improve sustainabil-ity, says Lorenzo Ciferri,
Marketing Director of agri-cultural and forestry tires within Trelleborg Wheel Systems. With TM Blue farmers get a higher yield and at the same time re-duce their CO2 emissions.
The TM Blue agricul-tural tires till the soil in a gentle manner through low compaction, which allows the soil to return to its origi-nal state, resulting in lower plant loss and higher crop yields. This contributes to a six percent reduction in the carbon footprint compared with using other premium-brand tires.
Six percent may not sound like a huge amount, but it adds up. For example, the TM1000 HP BlueTire tires sold in 2013 will re-duce CO2 emissions by up to 13,700 tons over the life of the tire. This is equivalent to the CO2 emissions from about 2,884 personal vehi-cles in the course of a year.
The wide footprint area, up to 13 percent wider than the market average, gives better flotation characteris-tics by distributing the load evenly across the footprint. The excellent traction capa-bility of the TM Blue tires reduces slippage, which in turn reduces work time and energy dissipation, result-ing in lower fuel consump-tion. In just one week of tilling, the tires can provide fuel consumption savings of 45 to 75 litres and that adds up to cost savings for farmers as well.
In addition to the actual use of agricultural tires, Trelleborg is studying other aspects in the life cycle of tires, including raw mate-rials, production, distribu-tion and recycling.
In its Life Cycle Analysis (LCA) the bulk of the car-bon footprint of Trelleborg Wheel Systems 60 per-cent can be attributed to raw materials (excluding the LCAs use phase). We are improving the raw material phase through the eco-design of tires, select-ing the right suppliers and materials, Ciferri says.
In the production pro-cess, which accounts for 30 percent of the carbon foot-print, Trelleborg is analyz-ing each step to see how it can be more environmen-tally-friendly. Water recy-cling, projects to reduce energy consumption, using
renewable sources of en-ergy and eliminating waste are some of the solutions. Less than three percent of waste material goes to landfill sites, and environ-mentally-friendly extender oils are used throughout the production process to prevent the risk of environ-mental contamination.
The LCA shows that distribution accounts for just three to five percent of the carbon footprint, but Trelleborg is addressing this area as well by manu-facturing closer to its main markets. This will help re-duce CO2 emissions caused by long-distance deliver-ies. Trelleborgs first North American manufacturing facility dedicated to the manufacture of premium radial tires for agricultural machinery is currently be-ing built in South Carolina.
When it comes to the end of an agricultural tires life cycle, Trelleborg esti-mates that averages of 40 to 45 percent of tire materi-als are recycled. This por-tion increases significantly year to year, and it can po-tentially double within the next decade, adds Ciferri.
Looking to the future, he anticipates some big changes, especially when it comes to the use of raw materials. Two-thirds of our raw materials are based on fossil fuels, and we know this is going to have to change, he says. We are already working jointly with our key sup-pliers looking into ways to reduce our dependency on fossil fuels by replacing them with other materials, such as advanced bio-poly-mers to replace synthetic rubber. b
WE HAVE YOUR MILLING NEEDS COVERED!
Call Today... 877-537-5099
Four post power head all one piece welded, will not shake loose, cuts straight, without deflection.
Bandsaw Mill, Sawyer 29" Diameter Log, 17' Long.Lease to Own.From Only $155 per Month, ZERO DOWN!
$7,000
Quality Mills make Quality Lumber!
WE HAVE YOUR MILLING NEEDS COVEREDE: [email protected]
portablebandsawmills.ca
Continued from page 19
Trelleborg Is Working Toward A More Sustainable Tire Future
Were planning the next issue of
AD DEADLINE:May 15, 2015
5:00 pmDONTMISSOUT!
EXCAVATORS (2) Hitachi ZX450 (1) Hitachi ZX450 c/w sand preload bucket (9 yards) (1) Hitach ZX370 (5) ZX350 / ZX330 Hitachi ZX350/ZX330 cw sand preload bucket (7 yards) (6) Hitachi ZX225/ZX200 (1) Hitachi ZX200 w/breaker (2) Hitach ZX135 (6) Hitachi ZX75/ZX70 (1) Hitachi ZX75 w/breaker (2) Hitachi ZX35/JD35
RUBBER TIRE BACKHOES (2) Case 580 Super M (1) Case 580 Super M w/breaker
GRADER PSM Grader/Laser Controlled
DOZERS: (1) Case 850K (1) Case 650K (1) Komatsu D39PX
COMPACTORS: (1) 84" Smooth Drum (1) 54" Smooth Drum
DUMP TRUCKS (5) Tandem/Single (4) Truck and Pony (1) Water Truck (1) Sweeper Truck
ROCK TRUCKS (2) Volvo A25C
KYLE: 604-209-4600DAVE: 604-328-6342
EQUIPMENT AVAILABLE FOR RENT
(1) Case 580 Super M w/breaker
PSM Grader/Laser Controlled ALL
EQUIPMENT
RENTALS
AVAILABLE
WITH HIGHLY
SKILLED
OPERATORS
www.grpconstructionltd.ca
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 21
Surrey Toll Free
1.855.355.0109
KamloopsToll Free
1.800.553.7482
Quesnel Toll Free
1.855.991.0406
Dawson Creek Toll Free
1.800.663.3572
DouglasLakeEquipment.com
SALES - CONSTRUCTION & TURF EQUIPMENT RENTALS - CONSTRUCTION
Douglas Lake Equipment
Offers a full range of
construction Equipment.
Flexible lease terms or 0%
fi nancing is available
(O.A.C).
We welcome Doug
Bolton to DLE based
in our Quesnel
location. Please call
Doug for your Kubota
equipment needs at
250-255-6712.
SPRING SPECIAL15% DISCOUNT ON
APPLICABLE SPRING MAINTENANCE PARTS
EXCAVATORS COMPACT WHEEL LOADERS
Kobelco Kubota Liugong
140SR $6,000 SVL90 $3,600 835 2.5 Cu Yd. $5,000
210 $7,500 KX-080 $4,300 842 3.5 Cu Yd. $6,000
350 $10,000 KX-057 $3,600 856 4.5 Cu Yd. $6,500
R520S $2,600 877 5.5 Cu Yd. $7,500
KX-018/U17 $2,200
Liugong
915 $4,500
922 $5,500
925 $7,000
936 $8,000
Please Contact
Your Local
Douglas Lake
Branch To Find
Out More.
If you need a rental
machine, call Kyle
Winterbottom.
He will set you up with the
exact machine you need
for your job.
Call Kyle at
604-785-8678
*Rates quoted are monthly OAC
Construction,
Compact and
Turf Specialists!
Page 22 Supply Post Western Canada Edition supplypost.com May 2015
The Ditch Witch organi-zation introduces the SK850 footings machine, which is designed to create trenches up to 16 inches (41 cm) wide and up to 36 inches (91 cm) deep for slab construc-tion on residential and com-mercial jobsites.
With its specialized, heavy-duty chain and Tier 4, 37-hp (27.6-kW) diesel engine, the SK850 footings machine creates cleaner, more consistent trenches than an excavator can, and in less time. The machine is more compact than an excavator, so it can be more productive in tight
jobsites. Plus, it can trench from either a centreline or offset position, so the op-erator can dig right up to the backer board. With 43 inches (109 cm) of track on ground, the SK850 footings machine also has the sta-bility to effectively cross-trench.
The footings trencher attachment mounts direct-ly to the frame of the new SK850, the Ditch Witch or-ganizations most powerful mini skid steer, which of-fers a number of advanced, customer-requested fea-tures, including:A spacious, 74-sq-inch
(188-cm2) platform that is larger and provides more ground clearance than other mini skid steers in its class.
An ergonomic opera-tors station optimized for comfort and efficien-cy, featuring dual-lever ground drive controls and an advanced mono-chrome, in-dash LCD display for engine diag-nostics.
Standard auto-throttleincorporated into the new LCD displaythat reduces engine throttle when there is no load on the engine.
An auxiliary control foot pedal to help main-tain hydraulic flow to the trencher, freeing the operators hands to con-trol depth and ground speed. b
New Ditch Witch Footings Machine Faster Than Excavator
Dana Holding Corpora-tion (NYSE: DAN) show-cased its innovative metal-lic bipolar plate technology, among other fuel-cell com-ponents, at Hannover Messe 2015, April 13-17. The company also provid-ed a detailed overview of its fuel-cell work as a par-ticipant in the Auto-Stack CORE network, an impor-tant initiative to establish an industrial core for a fu-el-cell industry in Europe. The stack developed by the network was on display in the Dana booth.
Danas exhibit at Han-nover Fairgrounds - fea-tured a full range of fuel-cell products and thermal-management sys-tems, including moulded graphite composite bipolar plates, catalytic reactors for hydrogen reforming, fuel-cell balance-of-plant components, lithium-ion battery coolers, and insu-lated-gate bipolar transistor (IGBT) coolers for power electronics applications.
At Dana, were con-tinuously innovating and looking toward alterna-tive power sources as the demand for clean, effi-cient resources continues to evolve, said Dwayne Matthews, president of Danas Power Technolo-
gies Group. Contributing to the Auto-Stack CORE network has helped show-case our leadership in this critical industry sector, and we look forward to achiev-ing greater successes in the near future with this proj-ect.
The Auto-Stack CORE network is composed of 14 organizations, including original-equipment manu-facturers (OEMs), automo-tive suppliers, and research institutions. Each of the organizations participating in the coalition, including Dana, offers valuable ex-pertise in a range of fuel-cell capacities. The project launched in 2013 with the companies collaborating to develop best-in-class au-tomotive fuel stack hard-ware.
Danas most significant contribution to the proj-ect, optimized metallic bi-polar plates, has assisted the coalition in develop-ing a stack that achieves improved power density and performance than a traditional stack, while reducing the overall cost. The next step will be to en-hance each component and ultimately develop fuel-cell stack architecture ready for production. The project is expected to be completed
with production-capable components in 2016.
While in pursuit of mak-ing fuel-cells safer, more durable, and capable of increased performance, Dana and the Auto-Stack CORE coalition also are working to provide a more cost-effective solution. As a world leader in the development and manu-facture of fuel-cell stack components, reducing the costs associated with fuel-cell technology has been a key focus for Dana, as the company hopes to lower this barrier to more wide-spread adoption of fuel-cell vehicles.
Joachim Scherer, Ph.D., manager of fuel-cell R&D for Dana, highlighted Da-nas contribution to the Auto-Stack CORE platform; following Scherer was Hans Katzmaier, Danas director of global advanced business development, who addressed commer-cialization indicators of the automotive fuel-cell pow-ertrain.
Hannover Messe is a world leading trade fair for industry technology. It focuses on services and technologies from compa-nies all over the world that aid industrial innovation, production, and efficiency, specifically in industrial automation, energy and environmental technolo-gies, manufacturing, power transmission, and control capacities. The event took place in mid-April. b
Dana Showcases Fuel-Cell Components In Hannover
592 Lilac Cres., Campbell River, BC V9W 7G6Phone: 250-286-3211 Fax: 250-286-3284
[email protected] | www.saratogaventures.com
Saratoga VentureS Ltd.
TOLL FREE 1-888-668-1611 WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY
1998 Freightliner FL60 Shop Truck, equipped with V-Mac underhood compressor, 265,000 km. $49,500.
1979 Madill 071 Yarder c/w lines and buttrigging. This yarder is equipped with a Detroit 8V71T engine, updated tower and has the long skyline shaft to add
a water cooled brake. $89,000. Cat988BCylinders&Differential ..................... P.O.R. Cat966CCylinders ................................................ P.O.R. 218WaterCooledWichita&EatonParts ........... P.O.R.
DismantlingforParts: 1992KobelcosK300mark2logloader (2)Pacific30tonlogtrailers 630aPrenticefellerBuncher HayesHDXloggingtruck Cat320lExcavatorKenworth850logtruck ExcavatorBkts madillParts:009,044,075(rubber&trk) madill4800Undercarriage ClarkaxleComponents&PartsBD 71,000 & 91,000 CatrB325lExcavator
madill123BCremanufacturedaugust2014. PleaseCallforpriceandmoreinfo.
Your Attachment Specialists 1.800.255.5211 shearforce.ca
Own Or Rent Your Attachment Today
XCENTRIC RIPPER
Service you Deserve People you Trust
Up To 5X More Productive Than
Hydraulic Hammers
Or Static Rippers
Watch Video atShearforce.ca
Rubble MasterCompact Crushing Equipment
THE BEST TOOL FOR EXCAVATING ROCK, CONCRETE
AND FROZEN GROUND!
ShearForce Hammers
Hard-Hitting, Durable and
Reliable
REMU Screening Buckets
Crusher BucketsCompactors
May 2015 Supply Post Western Canada Edition Our Readers Are Your Buyers Page 23
Williams College cele-brated its recently completed Class of 1966 Environmental Center, a restoration and ex-pansion of a historic building that seeks to meet the Living Building Challenge, the most rigorous and advanced mea-sure of sustainability in the built environment. The cel-ebration included a public lecture by William Moomaw 59 on Friday, April 17, and a dedication of the Environ-mental Center on Saturday, April 18.
The Living Building Challenge (LBC) program certifies bu
Recommended