1.37 hrs
2 pcs
f
0.40 mm
k
0.60 mm
h
1
42.00 g
d
PrusaMK3/S
Summary
A nice soap box to store solid shampoo like Lush soaps. Since these soapstend to melt away easily when stored wet, this container has a lid to keepthem dry wehen not in use. Water can drain easily out the bottom. To usethe soap, just push on it trough the cutout in the bottom. One handedoperation is possible as well :-)
For the lid, use two M3x12mm screws. Glue the base and the spacertogheter, super glue works great.
Household > Bathroom
soapholder soapdish soap lush box bathroom
Print the spacer with brim. It might be needed to clean out the holes of thebase a bit to allow for easy rotation. Depending on your printer, the lidmight need a bit of cleanup aswell, since the gaps are fairly thight.
Markus
Soap box forshower
VIEW IN BROWSER
updated 7. 4. 2020 | published 7. 4. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
675.3 KB
0.47 hrs f 0.40 mm k 0.60 mm h PLA 12.70 g d PrusaMK3/S
updated 7. 4. 2020
1.4 MB
0.90 hrs f 0.40 mm k 0.60 mm h PLA 28.80 g d PrusaMK3/S
updated 7. 4. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
44.6 KBupdated 7. 4. 2020
66.7 KBupdated 7. 4. 2020
99.1 KBupdated 7. 4. 2020
128.3 KBupdated 7. 4. 2020
175.6 KBupdated 7. 4. 2020
spacer_06n_04mm_pla_mk3s_28m.gcode
box_and_lid_06n_04mm_pla_mk3s_54m.gcode
spacer.stl
lid-blank.stl
lid-a.stl
lid-m.stl
lid-s.stl
233.6 KBupdated 7. 4. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
box.stl