OPERATION
Scrolling
Step 1: Mark your stock with chalk at the point where you wish to stop scrolling.
Step 2: Make sure the HANDLE/INNER DIE ASSEMBLY (#S01) is in Hole #1 (the innermost)of the RING SPACER/DIE RECEIVER as shown in Figure 4.
Stock
Bushing(#S03) &
Bushing Pin(#S02)
in Hole #3
Handle/Inner DieReceiver
in Hole #1
Figure 4 � Starting the Scroll
Step 3: Make sure the BUSHING (#S03) is in Hole #3.
Step 4: Insert stock so that it is between the INNER DIE and the BUSHING and on the bottomflange of the BUSHING.
Step 5: Turn HANDLE counterclockwise to begin scrolling.
CAUTION:
Make sure stock is always resting on
the bottom flange of the BUSHING
when operating the scroll.
Page 6 -- SKU: 36621 REV 10/02
PARTS LIST
No. Item Description QuantityS01 Handle/Inner Die Assembly 1S02 Bushing Pin 1S02-1 Bushing Pin C-Ring 1S03 Bushing 1S05 Scroll Die 1
Page 8 -- SKU: 36621 REV 10/02
ASSEMBLY DIAGRAM
Page 9 -- SKU: 36621 REV 10/02
Item#36621Item#36621