OPERATION

Scrolling

Step 1: Mark your stock with chalk at the point where you wish to stop scrolling.

Step 2: Make sure the HANDLE/INNER DIE ASSEMBLY (#S01) is in Hole #1 (the innermost)of the RING SPACER/DIE RECEIVER as shown in Figure 4.

Stock

Bushing(#S03) &

Bushing Pin(#S02)

in Hole #3

Handle/Inner DieReceiver

in Hole #1

Figure 4 � Starting the Scroll

Step 3: Make sure the BUSHING (#S03) is in Hole #3.

Step 4: Insert stock so that it is between the INNER DIE and the BUSHING and on the bottomflange of the BUSHING.

Step 5: Turn HANDLE counterclockwise to begin scrolling.

CAUTION:

Make sure stock is always resting on

the bottom flange of the BUSHING

when operating the scroll.

Page 6 -- SKU: 36621 REV 10/02

PARTS LIST

No. Item Description QuantityS01 Handle/Inner Die Assembly 1S02 Bushing Pin 1S02-1 Bushing Pin C-Ring 1S03 Bushing 1S05 Scroll Die 1

Page 8 -- SKU: 36621 REV 10/02

ASSEMBLY DIAGRAM

Page 9 -- SKU: 36621 REV 10/02

Item#36621Item#36621