Available from Warren Distribution, Inc. | 727 South 13th Street. | Omaha, Nebraska 68102 | U.S.A. | 800-825-1235 | 402-341-9397 | Fax: 402-977-5881 | www.mag1.com

Stock #/Item #Pack Size Each UPC Case UPC Case SCC Case DimensionsCase Cube/Pallet Cube

Case Weight/Pallet Weight Pallet Stack

12/1 Quart 62891 / MG0D53PL 0 71621-62891 1 0 71621-62892 8 1 00 71621-62891 8 L 13.250" x W 10.250" x H 9.250" 0.727 / 77.500 24.425 / 2393.624 98 Cases (7 layers of 14)

55 Gallon 62896 / MG0D5355 0 71621-62896 6 N/A N/A L 23.000" x W 23.000" x H 35.000" 10.710 / 44.444 430.283 / 1721.132 4 Drums

SAE 5W-30 FULL SYNTHETIC MOTOR OILMAG 1 dexos1™ Full Synthetic Motor Oil is a state of the art, advanced technology motor oil which provides the highest level of engine protection available, even under the most severe operating conditions. MAG 1 dexos1™ Full Synthetic Motor Oil provides exceptional resistance to high temperature oxidation thickening. Our sophisticated additives prevent sludge formation commonly caused by moisture and combustion by-products. Exceptionally high viscosity indices minimize cold weather oil thickening, which greatly reduces battery drain and engine wear, even at subzero start ups. • MAG 1 dexos1™ Full Synthetic Motor Oil is formulated to prevent engine wear. Even in the most severe GM tests MAG 1 dexos1™ Full Synthetic Motor Oil

exceeds the performance limits by 65% • MAG 1 dexos1™ Full Synthetic Motor Oil keeps pistons cleaner than GF-5 minimizing oil consumption and maintaining power and compression performance • MAG 1 dexos1™ Full Synthetic Motor Oil chemistry significantly outperforms the industry requirement, reducing engine sludge to near zero • MAG 1 dexos1™ Full Synthetic Motor Oil is emission conserving protecting the car’s catalyst system to help protect the environmentExceeds GM dexos1™ specifications for world wide warranty requirements for all GM automotive gasoline engines currently in use. Meets requirements ofAPI SN, SM or SL and ILSAC GF-5 or GF-4. Suitable for use where GM 4718M and GM 6094M was previously recommended.License No. RB1A1104025

Property Test Method Min Max TypicalSpecific Gravity at 60°F ASTM D4052 N/A N/A 0.8522API Gravity ASTM D287 N/A N/A 34.54Viscosity at 100°C, cSt ASTM D445 9.3 <12.5 10.93Viscosity at 40°C, cSt ASTM D445 N/A N/A 63.95Viscosity Index ASTM D2270 N/A N/A 163ASTM Color ASTM D1500 N/A N/A 2.5Cold Cranking Simulator, cP ASTM D5293 N/A 6600 4800Zinc, % mass ASTM D5185 N/A N/A 0.085Phosphorus, % mass ASTM D4951 0.06 0.08 0.072Calcium, % mass ASTM D5185 N/A N/A 0.214Molybdenum, % mass ASTM D5185 N/A N/A 0.008Boron, % mass ASTM D5185 N/A N/A 0.023Sulfur, % mass ASTM D4951 N/A 0.5 0.252Nitrogen, % mass ASTM D5762 N/A N/A 0.102Sulfated Ash, % mass ASTM D874 N/A N/A 0.92

Typical Physical Properties

MAG1 Full Synthetic dexos 1™

dexos 1™ GF-5 GF-4

OxidationControl

FuelEconomy

Emission Compatibility

WearControl

Cleanliness& Sludge

• Our WPD average over a number of tests is 4.7, exceeding the dexos 1 requirement of 4.5.

• Sequence VG sludge limit for the dexos 1 specification is 8.3 min. The performance of our MAG1 Full Synthetic dexos1™ technology, even in the most severe industry group II stocks, comfortably exceeds both of these limits at 9.3.

• Opel RNT test- the wear performance of the HiTEC 11100 technology is a fraction of that allowed by the test limits. Our Opel result was 65% better than the spec limit.

• Noack Volatility- our typical is 10.5% vs. the dexos 1 requirement of 13%.