PRODUCTSKTI, Inc., offers the widest range of jacking joints in the trenchless industry:
■ Flowtite® Jacking Pipe – Flowtite Fiberglass Pipe for Jacking and microtunneling ■ Flow-Crete Jacking Pipe – Flowtite Fiberglass Lined RCP for Jacking and microtunneling■ meyer® Polymer Pipe for Jacking and microtunneling■ Reinforced Polycrete for Jacking and microtunneling■ Concrete Jacking Pipe – Reinforced Concrete Pipe for Jacking and microtunneling■ Reinforced Concrete and Polycrete Tunnel Segments
quality■ All Jacking and Microtunneling Products Meet or Exceed ASTM and AWWA Standards■ Flowtite Fiberglass Pipe and Liner is NSF Approved and ISO Certified■ All Joints are Watertight and Supplied with Controlled and Tight Tolerances■ All Joints are Proven and Extensively Tested in Accordance with National Standards■ Corrosion Resistant and Watertight Flowtite Fiberglass Pressure Coupling Joints
SERVICE■ No Job is Too Small and No Application or Design Requirement Too Difficult■ Large Capacity, Wide Capabilities, and Reliable Field Assistance■ Fleet of Company Trucks for Fast and Timely Delivery■ Portable Plants for On-Site Production
Safety■ All Joints and Pipes are Designed with High Safety Factors■ No Welding is Required in Confined and Restricted Space
FLOw-CREtE JACKING pipeThis product combines the compressive strength of reinforced concrete withthe corrosion resistance, pressure capabilities and excellent flowcharacteristics of Flowtite fiberglass pipe. This composite pipe incorporatesan outer load bearing wall of reinforced concrete and an inner Flowtitefiberglass liner pipe. The wall thickness of the RCP part is designed toaccommodate the jacking loads and distances under consideration and the
dimensions of the equipment used in the jacking process. In addition, thethickness of the Flowtite liner is designed to withstand the internal pressureand to resist the aggressive nature of sanitary sewers and other corrosiveliquid being conveyed. Flow-Crete is supplied with injection ports andwooden rings to facilitate the jacking operation.
PRESSUREDISTRIBUTINGRING
STAINLESSSTEELSLEEVE
RUBBERSEAL
REINFORCEDCONCRETEPIPE
EPOXY-ADHESIVE
FLOWTITEFIBERGLASSCOUPLING
FLOWTITEPIPE LINER
Flowtite JACKING PipeFlowtite is a glass reinforced polymer pipe produced on the continuouslyadvancing mandrel process, ensuring a consistently uniform product.Immune to galvanic and electrolytic corrosion, Flowtite is the ideal pipechoice for water supply systems. Its proven resistance to the acidicenvironment found in sanitary sewers speaks well for its use in wastewaterapplications as well. In fact, Flowtite has been the material of choice insewer systems worldwide. Lightweight, corrosion resistant and
manufactured under strict qualitystandards, Flowtite pipe is availablein diameters up to 156 inch and can
be supplied at any length up to 40 feet and greater if needed. The Flowtitemanufacturing process is unique in that it easily permits a custom product tobe made to meet specific lengths and diameters and other requirements. Thisis a unique feature in all the microtunneling pipe industry. With the ability tomake custom diameters, Flowtite can create the optimum pipe size to matchthe diameters of the jacking equipment. In addition, the high compressivestrength of the Flowtite structure, the flush joint configuration, and the tighttolerances of the pipe and joints make Flowtite an ideal pipe to be pushedinto place through jacking and microtunneling methods.
RUBBERSEAL
FLOWTITEFIBERGLASS SLEEVE
PRESSUREDISTRIBUTINGRING
FLOWTITEFIBERGLASS PIPE
FLOWTITE LINED mICROTUNNEL RCP
FLOWTITE FIBERGLASS mICROTUNNEL PIPE
Our manufacturing expertise in producing meyer polycrete andreinforced polymer products, as well as our extensive background inmanufacturing reinforced concrete piping and other precast products,makes us uniquely qualified to be the most comprehensive supplierin the industry of polymer and concrete tunnel segments. Weproduce these segments in accordance with the most stringentspecifications following strict manufacturing and quality controlprocedures. With our own transportation fleet, we monitor andcontrol the logistics to make sure segments end up on the jobsitewithout delays or damage.
Tunnel SegmentS Concrete and Reinforced Polymer Tunnel Segments
SINGLE PASS PRESSURE PIPE FOR WATER AND SEWER APPLICATIONS
Johnson County Pipe, Inc.800 County Rd. 209Alvarado, TX 76009Tel: 817.783.3444Fax: 817.783.6002
Concrete JACKING PipeOur reinforced concrete pipe with our standard Flowtite pressure coupling isavailable for gravity and pressure jacking applications (up to 50 psi). The uniquecombination of concrete pipe and the fiberglass flush joint coupling makes itpossible to jack reinforced concrete pipe in place without being concerned about
its long term structural integrity as aresult of corrosion. The long termperformance of the casing is critical tothe integrity of the inside conveyancepipeline as the non-structural groutingsystem is not adequate to withstandthe tremendous earth impact loadingin case the casing is compromised.
Steel couplings are available as well.
PRESSUREDISTRIBUTINGRING
STEELSLEEVE
RUBBERSEAL
REINFORCEDCONCRETEPIPE
EPOXY-ADHESIVE
Polymer pipe and tunnel segment products can be supplied from KTIfacilities in Alvarado, Texas and Zachary, Louisiana. Polymer concrete pipeis a composite material consisting of polyester resin, quartz sand, silicateaggregate and quartz filler. The resin is used to bond the kiln-dried silicateaggregate, thereby creating a dense, corrosion resistant matrix. KTI alsomanufactures reinforced polymer jacking pipe and manholes, as well asother customized products for special applications.
PRESSUREDISTRIBUTINGRING
RUBBERSEAL
EPOXY-ADHESIVE
STAINLESSSTEELSLEEVE RUBBER
SEALSTOPPERRING
POLYMERCONCRETEPIPE
MEYER AND REINFORCED POLYMER JACKING PIPE
California:Rialto Concrete Products
3011 N. Laurel Ave.Rialto, CA 92377Tel: 909.822.0200Fax: 909.822.9630
Louisiana:U.S. Composite Pipe South, LLC
18585 Samuels Rd.Zachary, LA 70791Tel: 225.658.6166Fax: 225.658.0947
www.flowtitepipe.com
Conroe Pipe, Inc.5150 Jefferson Chemical Rd.
Conroe, TX 77301Tel: 936.760.2259Fax: 936.760.2269
Texas:U.S. Composite Pipe, Inc.
800 County Rd. 209Alvarado, TX 76009Tel: 817.783.3444Fax: 817.783.6002
www.uscompositepipe.com
KTI, Inc.3009 N. Laurel Ave.Rialto, CA 92377Tel: 909.434.1888Fax: 909.434.1895Members of the KTI Pipe Group of CompaniesOwned and Operated in the U.S.A.
AmeriTex Pipe & Products, LLC3960 US Hwy. 90 East
Seguin, TX 78155 Tel: 830.372.2300Fax: 830.372.2303
www.ameritexpipe.com
mEYER POLYCRETE JACKING PIPE
PRESSUREDISTRIBUTINGRING
FLOWTITEFIBERGLASSCOUPLING
RUBBERSEAL
REINFORCEDCONCRETEPIPE
CONCRETE JACKING PIPE WITH FIBERGLASS COUPLING
CONCRETE JACKING PIPE WITH STEEL SLEEVE
REINFORCED POLYmER PIPEmEYER PIPE
PRESSUREDISTRIBUTINGRING
RUBBERSEAL
STEELSLEEVE RUBBER
SEAL
POLYMERREINFORCEDCONCRETEPIPE
EPOXY-ADHESIVE
REINFORCED POLYCRETE JACKING PIPE
Reinforced polymer is ideal for corrosive environments such as sanitary sewers. The material itself is its own protection from corrosion. There isno need to coat or line polymer concrete pipe. Being a steel reinforced concrete product, it can also handle severe loading, whether it is live load,backfill dead load, or high thrust jacking applications.