Powder Ext. 12k Abc W/O Brkt ModelP12p M18
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Powder Ext. 12k Abc W/O Brkt Model P12p M18
Product Group: 291 Product number: 766994
General descriptionOur 12 kg powder extinguishers boast high levels ofmonoammonium phosphate giving you quicker fire fightingcapability even on electrical fires up to 35 kV.
Unitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.
Features• Higher fire ratings• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• High concentrates of fire fighting medium ensure quicker
fire fighting capability to reduce damage costs• Integrated flow control valve at the hose end equips you
with a direct and better control to fight fire• Our higher than normal industry standard burst pressure for
the cylinder and hose safeguards you when fire fighting• A long life and low maintenance costs are assured as our
extinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isalso included.
Technical dataCapacity 12 Kg
Min discharge range 4 Mtr
Test Pressure 26 Bar
Working Pressure 14.2 Bar
Weight Empty 7.8 Kg
Weight Full 19.8 Kg
Height 730 mm
Diameter 180 mm
Fire Rating 55A-233B-C
Operating temp range -30 C to +60 C
Incompatibility
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate.
Never use one of these powders to refill a device which hascontained the other product
Spare Charges Regulations
• Spare charges shall be provided for 100% of the first tenextinguishers and 50% of the remaining fire extinguisherscapable of being recharged on board. Not more than sixtytotal spare charges are required. Instructions for rechargingshall be carried on board
Ordering information
Product Number Product name
766994 EXTINGUISHER POW 12KG
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
766993 POWDER EXT. 12K ABC W/BRKT
Accessories
Product Number Product name
Recommended to conform to regulations
668251 CO2 CARTRIDGE F/P12/P12P
668319 ABC POWDER 12KG
667584 VALVE SEAL FOR EXTINGUISHER
If Required
669655 STRAP F/MARINE BRACKET
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well China ClassificationSociety
Approval documents
Type Document Size
766994 MED Certificate PDF 102 KB
766994 EN3-7A1 certificate PDF 505 KB
Module D Certificate PDF 100 KB
Type Document Size
RMRS Certificate PDF 2391 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy To Use
Operation Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. Theflow rate is controlled by the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.
Pressurization during use Striking the internal cartridge releases the propellant (CO2), pressurizes the body andthus causes the powder to be discharged. The cartridge is interchangeable and its level can be checked accuratelyby weighing, so the extinguisher can be refilled on site, without having to send it back to the factory. Both preventiveand corrective maintenance can therefore be carried out in optimum conditions
Instruction For Use
1. Pull out the safety pin2. Strike by pressing handle3. Control the flow rate by squeezing the final control valve and direct the spray at the base of the fire
DocumentationProduct documentation
Type Document Size
766994 Technical data sheet PDF 169 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
Powder Ext 9 Kg ABC
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Powder Ext. 9 kg Abc W/O Brkt Model P9p M18
Product Group: 291 Product number: 766990
General descriptionOur 9kg powder extinguishers boast high levels ofmonoammonium phosphate giving you quicker fire fightingcapability even on electrical fires up to 35 kV.
Unitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.
Features• Higher fire ratings• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• High concentrates of fire fighting medium ensure quicker
fire fighting capability to reduce damage costs• Integrated flow control valve at the hose end equips you
with a direct and better control to fight fire• Our higher than normal industry standard burst pressure for
the cylinder and hose safeguards you when fire fighting• A long life and low maintenance costs are assured as our
extinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isalso included.
Technical dataFire rating 43A/233B/C
Capacity 9 Kg
Min discharge Range 4 Mtr
Burst disc pressure 26 Bar
Working Pressure 15 Bar
Weight Empty 6 Kg
Weight Full 15 Kg
Height 640 mm
Diameter 180 mm
Operating temp range -30 C to + 60 C
Incompatibility
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate.
Never use one of these powders to refill a device which hascontained the other product
Spare Charges Regulations
• Spare charges shall be provided for 100% of the first tenextinguishers and 50% of the remaining fire extinguisherscapable of being recharged on board. Not more than sixtytotal spare charges are required. Instructions for rechargingshall be carried on board
Ordering information
Product Number Product name
766990 POWDER EXT. 9K ABC W/O BRKT
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
766989 POWDER EXT. 9K ABC W/BRKT
Accessories
Product Number Product name
Recommended to conform to regulations
668244 CO2 CARTRIDGE F/P6/P9P
668293 ABC POWDER 9 KG
667584 VALVE SEAL FOR EXTINGUISHER
If Required
669655 STRAP F/MARINE BRACKET
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification society
Approval documents
Type Document Size
766990 MED Certificate PDF 101 KB
MODULE D Certificate PDF 100 KB
RMRS Certificate PDF 2391 KB
Type Document Size
China Class Society Certificate PDF 2142 KB
Directions for useEasy to Use
Operation Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. Theflow rate is controlled by the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.
Pressurization during use
Striking the internal cartridge releases the propellant (CO2), pressurizes the body and thus causes the powder to bedischarged. The cartridge is interchangeable and its level can be checked accurately by weighing, so theextinguisher can be refilled on site, without having to send it back to the factory. Both preventive and correctivemaintenance can therefore be carried out in optimum conditions.
Instruction of Use
1. Pull out the safety pin2. Strike by pressing handle3. Control the flow rate by squeezing the final control valve and direct the spray at base of fire
DocumentationProduct documentation
Type Document Size
766990 Technical data sheet PDF 177 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
Powder Ext 6 Kg ABC
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Powder Ext. 6 kg Abc W/O Brkt Model P6p M18
Product Group: 291 Product number: 766988
General descriptionOur 6 kg powder extinguishers boast high levels ofmonoammonium phosphate giving you quicker fire fightingcapability even on electrical fires up to 35 kV.
Unitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.
Features• Higher fire ratings• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• High concentrates of fire fighting medium ensure quicker
fire fighting capability to reduce damage costs• Integrated flow control valve at the hose end equips you
with a direct and better control to fight fire• Our higher than normal industry standard burst pressure for
the cylinder and hose safeguards you when fire fighting• A long life and low maintenance costs are assured as our
extinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isalso included.
Technical dataFire rating 34A/233B/C
Capacity 6 Kg
Discharge Range 4 Mtr
Burst disc pressure 26 Bar
Working Pressure 13 Bar
Weight Empty 5 Kg
Weight Full 11 Kg
Height 500 mm
Diameter 180 mm
Operating temp range -30 C to + 60 C
Incompatibility
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate.
Never use one of these powders to refill a device which hascontained the other product
Spare Charges Regulations
• Spare charges shall be provided for 100% of the first tenextinguishers and 50% of the remaining fire extinguisherscapable of being recharged on board. Not more than sixtytotal spare charges are required. Instructions for rechargingshall be carried on board
Ordering information
Product Number Product name
766988 POWDER EXT. 6K ABC W/O BRKT
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
766987 POWDER EXT. 6K ABC W/BRKT
Accessories
Product Number Product name
Recommended to conform to regulations
668236 CO2 CARTRIDGE 120G F/P6P
668285 ABC POWDER 6 KG
667584 VALVE SEAL FOR EXTINGUISHER
If Required
669655 STRAP F/MARINE BRACKET
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society.
Approval documents
Type Document Size
766988 MED Certificate PDF 101 KB
766988 NF EN3-7A1 certificate PDF 494 KB
MODULE D certificate PDF 100 KB
Type Document Size
RMRS Certificate PDF 2391 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy To Use
Operation Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. Theflow rate is controlled by the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.
Pressurization during use Striking the internal cartridge releases the propellant (CO2), pressurizes the body andthus causes the powder to be discharged. The cartridge is interchangeable and its level can be checked accuratelyby weighing, so the extinguisher can be refilled on site, without having to send it back to the factory. Both preventiveand corrective maintenance can therefore be carried out in optimum conditions.
Instruction for Use
1. Pull out the safety pin2. Strike by pressing the handle3. Control the flow rate by squeezing the final control valve direct the spray at base of fire
DocumentationProduct documentation
Type Document Size
766988 Technical data sheet PDF 175 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
Water Ext 9 L
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Water Ext. 9 l W/O B E9 Model E9
Product Group: 290 Product number: 766982
General descriptionOur 9 L cartridge operated water extinguisher gets to the heart offires with the specially designed lance giving you quicker firefighting capabilities.
Unitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.
Features• Higher fire ratings• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• Our water fire extinguishers have a high fire rating giving
you quicker fire fighting capability even on electrical fires upto 1000 V
• Integrated flow control valve at the hose end equips youwith a direct and better control to fight fire
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isincluded.
Technical dataCapacity 9 Ltr
Min discharge Range 4 Mtr
Test Pressure 26 Bar
Working Pressure 11.2 Bar
Weight Empty 6Kg
Weight Full 15Kg
Height 500 mm
Diameter 180 mm
Fire Rating 21 A
Operating temp range +5 C to + 60 C
Properties
The extinguisher can also be used in the presence of an electricalsource. There is no danger: the fact that the water is to thrown in a
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
fine droplet spray and its additive prevents it from conductingelectricity at voltages less than 1000 V.
Spare Charges Regulations
• Spare charges shall be provided for 100% of the first tenextinguishers and 50% of the remaining fire extinguisherscapable of being recharged on board. Not more than sixtytotal spare charges are required. Instructions for rechargingshall be carried on board
Ordering information
Product Number Product name
766982 WATER EXT.9L W/O B E9
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
766981 WATER EXT.9L W/B E9
Accessories
Product Number Product name
Recommended to conform to regulations
668178 CO2 CARTRID.60G F/E9/E9A1
667584 VALVE SEAL FOR EXTINGUISHER
If Required
669655 STRAP F/MARINE BRACKET
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society.
Approval documents
Type Document Size
766982 MED Certificate PDF 190 KB
766982 NF EN3-7A1 certificate PDF 467 KB
MODULE D certificate PDF 100 KB
RMRS certificate PDF 2428 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy To Use
Operation
Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. The flow rate iscontrolled by the final control valve. The fact that it is so simple to use means that risks of incorrect use are greatlyreduced.
Pressurization during use
Striking the internal cartridge releases the propellant (CO2), pressurizes the body and thus causes the water andadditive to be discharged. The cartridge is interchangeable and its level can be checked accurately by weighing, sothe extinguisher can be refilled on site, without having to send it back to the factory. Both preventive and correctivemaintenance can therefore be carried out in optimum conditions.
Instruction for Use
1. Pull out the safety pin2. Strike by pressing handle3. Control the flow rate by squeezing the final control valve and direct the spray at base of fire
DocumentationProduct documentation
Type Document Size
766982 Technical data sheet PDF 187 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
EDP_766984_Foam 9L Extinguisher
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Foam Ext. 9 l W/O B
Product Group: 290 Product number: 766984
General descriptionOur 9 L foam extinguisher gives you a specially blended highperformance AFFF additive enabling you to fight fires quicker andefficiently.
Unitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.
Features• Higher fire ratings• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• Specially blended high performance AFFF additive enables
you to fight fires quickly and efficiently ensuring damagecosts are reduced to a minimum.
• Integrated flow control valve at the hose end equips youwith a direct and better control to fight fire
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin inincluded.
Technical dataCapacity 9 Ltr
Min discharge range 4 Mtr
Test Pressure 26 Bar
Working Pressure 11.2 Bar
Weight Empty 6 Kg
Weight Full 15Kg
Height 640 mm
Diameter 180 mm
Fire Rating 27A-233B
Operating temp range +5 C to +60 C
Properties
the extinguisher can be used in the presence of an electricalsource. There is no danger as the water is thrown in a fine droplet
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
spray prevents it and its additive from conducting electricity atvoltages less than 1000 V.
Spare Charges Regulations
• Spare charges shall be provided for 100% of the first tenextinguishers and 50% of the remaining fire extinguisherscapable of being recharged on board. Not more than sixtytotal spare charges are required. Instructions for rechargingshall be carried on board
Ordering information
Product Number Product name
766984 EXTINGUISHER FOAM 9L
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
766983 EXTINGUISHER FOAM 9L
Accessories
Product Number Product name
Recommended to conform to regulations
668178 CO2 CARTRID.60G F/E9/E9A1
736579 AFFF FOAM CHARGE 90ML FOR E9A1EV
667584 VALVE SEAL FOR EXTINGUISHER
If Required
669655 STRAP F/MARINE BRACKET
ApprovalsThe extinguisher holds MED, RMRS, CCS, PED and NF EN 3 -7 approvals. The extinguishers are completelycompliant with the MED and SOLAS standards.
Approval documents
Type Document Size
766984 MED Certificate PDF 104 KB
766984 PED certificate PDF 1011 KB
766984 NF EN3-7 certificate PDF 509 KB
MODULE D certificate PDF 100 KB
RMRS certificate PDF 2428 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy to Use Operation Once the safety pin has been removed, the device is pressurized by pressing on the strikinghandle. The flow rate is controlled by the final control valve. The fact that it is so simple to use means that risks ofincorrect use are greatly reduced.
Pressurization during use Striking the internal cartridge releases the propellant (CO2), pressurizes the body andthus causes the water and additive to be discharged. The cartridge is interchangeable and its level can be checkedaccurately by weighing, so the extinguisher can be refilled on site, without having to send it back to the factory. Bothpreventive and corrective maintenance can therefore be carried out in optimum conditions.
1. Pull out the safety pin2. Strike by pressing handle3. Control the flow rate by squeezing the final control valve and direct the spray at base of fire
DocumentationProduct documentation
Type Document Size
766984 Technical data sheet PDF 221 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
EDP_764043
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Foam Ext.9l W/O Brkt.Ev Low Tmp.Hi Type E9a1ev Lt Hp
Product Group: 290 Product number: 764043
General descriptionThe Unitor 9 L, cartridge operated, low temp application foam fireextinguisher overcomes limitations that occur when fighting fires inextreme low temperature conditions with normal foamextinguishers.
We introduce antifreeze with our high performance AFFF foam toensure an impregnable foam film is achieved to extinguish the fireand prevent reignition.
This extinguisher does not include the hanging bracket.
Features• Special high performance AFFF additive and antifreeze• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• Specially blended AFFF additive with antifreeze enables
you to fight fires at sub zero temperatures quickly andefficiently ensuring damage costs are reduced to aminimum
• Integrated flow control valve at the hose end equips youwith a direct and better control to fight fire
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isincluded.
Technical dataCapacity 9 Ltr
Min discharge range 4 Mtr
Test Pressure 26 Bar
Working Pressure 11.2 Bar
Weight Empty 6 Kg
Weight Full 15Kg
Height 640 mm
Diameter 180 mm
Fire Rating 27A-233B
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
Operating temp range -10 C to +60 C
Properties
the extinguisher can be used in the presence of an electricalsource. There is no danger as the water is thrown in a fine dropletspray prevents it and its additive from conducting electricity atvoltages less than 1000 V.
Ordering information
Product Number Product name
764043 FOAM EXT.9L WO BRK.EV LOW TMP.HI PR
If required
ApprovalsApproval documents
Type Document Size
EN 3 Certificate 9L foam low temperature PDF 644 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
763870 6 litre fat fire extinguisher
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Fat Fire Ext. 6 L W/O Brkt Model E6a15 Evf
Product Group: 290 Product number: 763870
General descriptionOur Unitor 6 L, cartridge operated, fat fire extinguisher has beenspecially designed for extinguishing cooking oil fires in industrialkitchens and canteens.
As the first line of defence, it can be installed in addition to theautomatic system in open kitchens where automatic equipment isrequired, or as a means suited to the risks presented in kitchens,reheating rooms and cooking islands.
Features• A B F rated- specially designed for kitchen oil fires (Class F)• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• Our fat fire extinguishers contain water plus a high
performance AFFF additive which forms a film in additionwill extinguish electrical fires up to 35KV
• The integrated flow control valve at the curved hose endequips you with a direct and better control to fight the fire
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isinlcuded.
Technical dataCapacity 6 Ltr
Discharge Range 3 Mtr
Burst disc pressure 26 Bar
Working Pressure 11.2 Bar
Weight Empty 6Kg
Weight Full 12 Kg
Height 500 mm
Diameter 180 mm
Fire Rating 13A-144B-75F
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
Ordering information
Product Number Product name
766980 FAT FIRE EXT. 6L WITH BRKT
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
Accessories
Product Number Product name
Required in case of use
668178 CO2 CARTRID.60G F/E9/E9A1
736579 AFFF FOAM CHARGE 90ML FOR E9A1EV
667584 VALVE SEAL FOR EXTINGUISHER
If Required
669655 STRAP F/MARINE BRACKET
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment and also complies withEuropean standard NF EN 3-7A1.
Approval documents
Type Document Size
763870 MED Certificate PDF 103 KB
763870 NF EN3-7A1 certificate PDF 1363 KB
MODULE D certificate PDF 100 KB
RMRS certificate PDF 2428 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy To Use
Operation
Once the safety pin has been removed, press the striking handle to pressurise the extinguisher. The flow rate iscontrolled by the spray gun on the nozzle. The fact that it is so simple to use means that risks of incorrect use aregreatly reduced.
* Pressurization during use*
The internal cartridge’ s discharge releases the propellant gas (CO2), pressurises the reservoir and thus allows thewater and its additive to be discharged. The interchangeability of this cartridge and its precise control by weighing
means the extinguisher can be re-charged in situ, without being returned to the plant. Both preventive and correctivemaintenance can therefore be carried out in optimum conditions.
Instructions For Use
1. Pull out the safety pin by pulling the ring2. Strike by pressing the handle3. Press the spray gun leverand direct the jet at the base of the flames
DocumentationProduct documentation
Type Document Size
763870 Technical data sheet PDF 185 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
657957 Metal Fire Extinguisher
Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /
Metal Fire Ext. 9 kg W/O Brkt Model P9fm.M M18
Product Group: 290 Product number: 657957
General descriptionThe Unitor 9 kg, cartridge operated, powder metal fire extinguisherovercomes the limitations when fighting metal fires withconventional fire extinguishers.
Introducing argon with the Microfire D powder ensures the powderbonds to magnesium, aluminium, zinc, calcium and sodium fires,extinguishes them and prevents reignition.
This extinguisher does not include the special bracket.
Features• Special powder and argon propelling agent for metal fire
fighting• Easier fire fighting capability• Safer fire fighting• High quality material and finish
Benefits• Specially blended Microfire D powder enables you to fight
metal fires quickly and efficiently ensuring damage costsare reduced to a minimum
• Integrated flow control valve at the hose end equips youwith a direct and better control to fight fire
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isincluded.
Technical dataCapacity 9Kg
Test Pressure 26 Bar
Working Pressure 11.2 Bar
Weight Empty 9 Kg
Weight Full 18 Kg
Height 640 mm
Diameter 180 mm
Fire rating Class D
Operating temp range -30 C to + 60 C
Argon cartridge 0.536 L
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
Properties
Fluid white powder may be used on electrical sources. Comprisesa low percentage of potassium salts mixed with micro-particles ofglass which melt at a low temperature (less than 600°C) to form anadhesive coat with no vents.
Incompatibility
Microfire D powder is strictly incompatible with all other powders.Never refill an extinguisher except with the original powder.
Ordering information
Product Number Product name
657957 METAL FIRE EXT. 9K W/O BRKT
766996 Metal Fire Extinguisher with bracket
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
Accessories
Product Number Product name
Recommended to conform to regulations
759902 Microfire Powder for Metal Fire Extinguisher
759894 Argon Cylinder 0.53 L
667584 VALVE SEAL FOR EXTINGUISHER
If required
669655 STRAP F/MARINE BRACKET
ApprovalsThe metal fire extinguisher has been examined against the provisions of Annex III, Module B, of the PressureEquipment Directive 97/23/EC.
Approval documents
Type Document Size
BV PED Approval PDF 1011 KB
DocumentationProduct documentation
Type Document Size
657957 Technical data sheet PDF 214 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
766995 2Kg ABC stored pressureextinguisher
Home / Fire Protection / Fire Extinguishers / Stored Pressure Extinguishers /
Powder Ext. 2k Abc W/Spc W/Brkt Model Pp2p
Product Group: 291 Product number: 766995
General descriptionUnitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.
Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguisherlonger life and reduced maintenance costs.
Features• Higher fire ratings• Safer fire fighting• High quality material and finish
Benefits• Our fire extinguishers boast high levels of mono ammonium
phosphate giving you quicker fire fighting capability even onelectrical fires up to 35Kv
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2mm thick steel, shotblasted, and polyester coated with a non rusting safety pin
Technical dataCapacity 2 Kg
Min discharge range 4 Mtr
Test Pressure 21 Bar
Working Pressure 12 Bar
Weight Empty 1.6 Kg
Weight Full 3.6 Kg
Height 380 mm
Diameter 105mm
Fire Rating 13A - 89B- C
operating temp range -30C to +60C
Incompatibility
The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate. Never use one of these powders to refill a devicewhich has contained the other product
.
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
Ordering information
Product Number Product name
766995 POWDER EXT. 2K ABC W/SPC W/BRKT
Accessories
Product Number Product name
Recommended spares to conform to regulations
766995 POWDER EXT. 2K ABC W/SPC W/BRKT
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment. It complies with Europeanstandard EN 3 and is one of the highest performance devices in its category.
Approval documents
Type Document Size
766995 MED Certificate PDF 101 KB
766995 NF EN3-7A1 certificate PDF 667 KB
MODULE D Certificate PDF 100 KB
RMRS Certificate PDF 2384 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy To Use Operation
After removing the safety pin, press the control lever, releasing the powder. A check valve inside the head capcontrols the flow rate. The fact that it is so simple to use means that risks of incorrect use are greatly reduced.
Permanent pressure
The extinguisher is pressurized during manufacture, and undergoes a helium test to ensure that it is totally leak-tight.An indicator monitors the pressure over time. The extinguisher must be returned to the factory for refilling; in practiceon-site requalification involves exchanging the extinguisher.
Instructions For Use
1.Pull out the safety pin by pulling the ring
1. Press the trigger and steam the jet at the base of the flames
DocumentationProduct documentation
Type Document Size
766995 Technical data sheet PDF 107 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
667535 5Kg CO2 Extinguisher
Home / Fire Protection / Fire Extinguishers / Stored Pressure Extinguishers /
Co2 Ext 5k W/O Brkt Model U5c
Product Group: 292 Product number: 667535
General descriptionOur Unitor range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguishera longer life and reduced maintenance costs.
Features• Higher fire ratings• Safer fire fighting• High quality material and finish
Benefits• Our CO2 fire extinguishers are suitable to fight fires on live
electrical installations on board shipping vessels and can beused on electrical fires up to 35Kv
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2mm thick steel, shotblasted, and polyester coated with a non rusting safety pin
Technical dataCapacity 5 Kg
Burst Disc Pressure 200 Bar
Test Pressure 250 Bar
Working Pressure 169.3 Bar
Weight Full 14 Kg
Height 930 mm
Diameter 139.7 mm
Fire Rating 89B
Operating temp range -30C to +65C
Properties
CO2 is almost completely non toxic, and leaves no residue afteruse.
Electrical fires
CO2 does not conduct electricity, and is specially recommendedfor all fires in the presence of a live conductor for example :transformers, electrical panels, computers, motors.
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
Ordering information
Product Number Product name
667535 CO2 EXT 5K W/O BRKT
668111 MAR BRACKET W/STRAP F/U5C
667527 CO2 EXT 5K W/ BRKT
Accessories
Product Number Product name
Recommended spares to conform to regulations
667535 CO2 EXT 5K W/O BRKT
If Required
669655 STRAP F/MARINE BRACKET
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society.
It complies with European standard NF - EN 3, and has demonstrated the highest performance in its category
Approval documents
Type Document Size
667535 MED Certificate PDF 101 KB
66753 EN3-7A1 certificate PDF 583 KB
MODULE D certificate PDF 100 KB
RMRS certificate PDF 2301 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy To Use
Operation
Very easy to use. After removing the safety pin, press the operating lever. This lever releases the CO2 and controlsits flow rate. By means of a valve located inside the CO2 self closing control valve. In the latter, also features asafety valve that ensures the release of CO2 in the event of excess pressure, notably in the case of prolongedexposure to a temperature above 60°C.
Principle of permanent pressure
The apparatus is loaded with its extinguishing agent, self-propelling gas, on manufacture. The load is checkedaccurately by weight. The extinguisher must be returned to the factory for refilling.
Instructions for Use
1. Pull out the safety pin2. Hold the plastic discharge horn and aim at the base of the fire3. Strike lever down fully and press on CO2 self closing control valve
DocumentationProduct documentation
Type Document Size
667535 Technical data sheet PDF 138 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
Stored Pres 6 Kg ABC Powder Ext
Home / Fire Protection / Fire Extinguishers / Stored Pressure Extinguishers /
Dp Ext. 6k Abc Pp6p Sp Wo/Bracket
Product Group: 291 Product number: 671594
General descriptionOur Unitor range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguishera longer life and reduced maintenance costs.
Features• Higher fire ratings• Safer fire fighting• High quality material and finish
Benefits• Our fire extinguishers boast high levels of mono ammonium
phosphate giving you quicker fire fighting capability even onelectrical fires up to 35Kv
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2mm thick steel, shotblasted, and polyester coated with a non rusting safety pin
Technical dataCapacity 6 Kg
Min discharge range 4.5 Mtr
Burst disc pressure 24 Bar
Working Pressure 13.5 Bar
Weight Empty 3.3 Kg
Weight Full 9.4 Kg
Height 530 mm
Diameter 190 mm
Fire Rating 34A - 233B- C
Operating temp range -20 C to + 60 C
Incompatibility
The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate. Never use one of these powders to refill a devicewhich has contained the other product
Spare Stored Pressure Extinguisher regulations
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
• For fire extinguishers which cannot be recharged on board,additional portable fire extinguishers of the same quantity,type, capacity and number be provided for 100% of the firstten extinguishers and 50% of the remaining fireextinguishers. Not more than sixty total spare extinguishersare required.
Ordering information
Product Number Product name
671909 MARINE BRACKET W/STRAP F/PP6P
Accessories
Product Number Product name
Recommended spares to conform to regulations
671594 DP EXT. 6K ABC PP6P SP WO/BRACKET
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society
It complies with European AENOR - EN 3 standard, and is of the hightest performance in its category.
Approval documents
Type Document Size
EDP 671594 MED Module B Certificate PDF 80 KB
MODULE D certificate PDF 83 KB
RMRS Certificate PDF 2384 KB
China Class Society Certificate PDF 2142 KB
Directions for useEasy To Use
Operation
Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. The flow rate iscontrolled by the tap on the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.
Permanent pressure
The device is pressurised during manufacture. A pressure gauge shows that pressure is maintained over time. Theextinguisher must be refilled at the factory ; in practice the operation takes place on-site by a standard exchange
Instruction for Use
1. Pull out the safety pin2. Press on the striking handle and direct the spray at base of fire.
DocumentationSDS
• DP EXT. 6K ABC PP6P SP WO/BRACKET
Product documentation
Type Document Size
671594 Technical data sheet PDF 155 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
Stored Pres 9KG ABC Powder Ext
Home / Fire Protection / Fire Extinguishers / Stored Pressure Extinguishers /
Dp Ext. 9k Abc Pp9p Sp Wo/Bracket
Product Group: 291 Product number: 739508
General descriptionOur Unitor range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguishera longer life and reduced maintenance costs.
Features• Higher fire ratings• Safer fire fighting• High quality material and finish
Benefits• Our fire extinguishers boast high levels of mono ammonium
phosphate giving you quicker fire fighting capability even onelectrical fires up to 35Kv
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2mm thick steel, shotblasted, and polyester coated with a non rusting safety pin
Technical dataCapacity 9 Kg
Minimum Discharge Time 26 Sec
Discharge Range 4.5 Mtr
Test Pressure 24Bar
Working Pressure 13.5 Bar
Weight Empty 4.4 Kg
Weight Full 13.5Kg
Height 587mm
Diameter 218mm
Fire Rating 43A-233B-C
Operating temp range -20 C to +60 C
Incompatibility The mono-ammonia phosphate-based ABCpowder is strictly incompatible with the BC powder, a derivative ofsodium bicarbonate. Never use one of these powders to refill adevice which has contained the other product
Spare Stored Pressure Extinguisher regulations
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
• For fire extinguishers which cannot be recharged on board,additional portable fire extinguishers of the same quantity,type, capacity and number be provided for 100% of the firstten extinguishers and 50% of the remaining fireextinguishers. Not more than sixty total spare extinguishersare required.
Ordering information
Product Number Product name
739508 DP EXT. 9K ABC PP9P SP WO/BRACKET
739516 MARINE BRACKET F/PP9P
Accessories
Product Number Product name
Recommended spares to conform to regulations
739508 DP EXT. 9K ABC PP9P SP WO/BRACKET
If Required
756387 STRAP F/M. BRACKET F/PP12P 5 PCK
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society
It complies with European standard NF - EN 3 and is of the highest performance devices in its category
Approval documents
Type Document Size
739508 MED certificate JPG 331 KB
MODULE D certificate PDF 83 KB
RMRS Certificate PDF 2384 KB
China Class Society Certificate PDF 2142 KB
Directions for useEASY TO USE
Operation
Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. The flow rate iscontrolled by the tap on the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.
Permanent pressure
The device is pressurised during manufacture. A pressure gauge shows that pressure is maintained over time. Theextinguisher must be refilled at the factory ; in practice the operation takes place on-site by a standard exchange.
* Instruction for Use*
1. Pull out the safety pin2. Press on the striking handle and direct the spray at the base of the fire
DocumentationSDS
• DP EXT. 9K ABC PP9P SP WO/BRACKET
Product documentation
Type Document Size
739508 Technical data sheet PDF 177 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company
743104 12kg Dry powder Stored pressure
Home / Fire Protection / Fire Extinguishers / Stored Pressure Extinguishers /
Dp Ext. 12k Abc Pp12p Sp Wo/Bracket
Product Group: 291 Product number: 743104
General descriptionOur Unitor range of fire extinguishers offer you higher fire ratings,easier fire fighting capability and increased levels of user safety.Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguishera longer life and reduced maintenance costs.
Features• Higher fire ratings• Safer fire fighting• High quality material and finish
Benefits• Our fire extinguishers boast high levels of mono ammonium
phosphate giving you quicker fire fighting capability even onelectrical fires up to 35Kv
• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting
• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2mm thick steel, shotblasted, and polyester coated with a non rusting safety pin
Technical dataCapacity 12 Kg
Min discharge range 4.5Mtr
Test Pressure 24 Bar
Working Pressure 13.5 Bar
Weight Empty 4.8 Kg
Weight Full 16.9 Kg
Height 630 mm
Diameter 198 mm
Fire Rating 55A-233B-C
Operating temp range -20 C to +60 C
Incompatibility
The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate. Never use one of these powders to refill a devicewhich has contained the other product
Spare Stored Pressure Extinguisher regulations
MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY
• For fire extinguishers which cannot be recharged on board,additional portable fire extinguishers of the same quantity,type, capacity and number be provided for 100% of the firstten extinguishers and 50% of the remaining fireextinguishers. Not more than sixty total spare extinguishersare required.
Ordering information
Product Number Product name
743104 DP EXT. 12K ABC PP12P SP WO/BRACKET
743112 MARINE BRACKET F/PP12P
Accessories
Product Number Product name
Recommended spares to conform to regulations
743104 DP EXT. 12K ABC PP12P SP WO/BRACKET
If Required
756387 STRAP F/M. BRACKET F/PP12P 5 PCK
ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society.
Approval documents
Type Document Size
743104 MED certificate JPG 352 KB
MODULE D Certificate PDF 83 KB
RMRS Certificate PDF 2384 KB
China Class Society Certificate PDF 2142 KB
Directions for useEASY TO USE
Operation
Once the safety pin has been removed, the device is pressurised by pressing on the striking handle. The flow rate iscontrolled by the tap on the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.
Permanent pressure
The device is pressurized during manufacture. A pressure gauge shows that pressure is maintained over time. Theextinguisher must be refilled at the factory ; in practice the operation takes place on-site by a standard exchange.
Instruction for Use
1. Pull out the safety pin2. Press on the striking handle and direct the spray at the base of the fire
DocumentationSDS
• DP EXT. 12K ABC PP12P SP WO/BRACKET
Product documentation
Type Document Size
743104 Technical data sheet PDF 177 KB
A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company