RESIDENTIAL CONTROL VALVES
Performa™ Control Valves263 and 268 Configurations
Logix™ Series740 Time Clock• Simple, economic electronic
time clock (chronometric)• 7- or 99-day regeneration
setting• High efficiency regeneration
sequence• 12-volt operation• Filter or conditioner setting
in one control• Operates 255, 263, 268
with one controller
742 Time ClockSame features as the 740 Time Clock, plus:• Fully programmable
cycle times• Salt setting in 1-pound
increments• Optional no-salt detector• Operates 255, 263, 268,
278, and Magnum® IT with one controller
760 Demand• Simple, economic electronic
demand (volumetric)• Calendar override• 12-volt operation• 28-day variable reserve• High efficiency regeneration
sequence• Automatic capacity
calculations• Operates 255, 263, 268
with one controller
762 DemandSame features as the 760, plus:• Fully programmable
cycle times• Salt setting in 1-pound
increments• Optional no-salt detector• Operates 255, 263, 268,
278, and Magnum IT with one controller
Pentair Water® offers a full range of Autotrol® Control Valves to meet all residential water conditioning applications.
764 DemandSame features as the 762, plus:
• Multi-tank applications (twin alternating, multi-tank parallel)
• Control lockout
• Remote regeneration
RESIDENTIAL CONTROL VALVES
Performa™ Control Valves263 and 268 Configurations
Electrical Controller Operating Voltage 12 Volt – AC (Requires use of Pentair Water®-supplied transformer)
Input Supply Frequency 50 or 60 Hz (Controller configuration dependent)
Motor Input Voltage 12 Volt – AC
Controller System Power Consumption 3 Watts average
Transformer – All Controllers All Controllers require the use of a Pentair Water-supplied transformer.
Transformer Output Voltage 12 Volt – AC 400mA
Transformer Input Options 115 Volt – AC 50/60 Hz; 230 Volt – AC 50/60 Hz; 100 Volt – AC 50/60 Hz
Transformer Plug Options Indoor North American Plug Taiwan/Korea Plug
Outdoor North American Australian Plug (UL Listed for outdoor use) United Kingdom Plug
Japanese Plug Mainland Europe Plug
Additional transformers may be available – call for more information.
Specifications
Design Specifications/RatingsValve Body Glass-filled thermoplastic – NSF Listed materialRubber Components Compounded for cold water – NSF Listed materialValve Materials Certification WQA Gold Seal Certified to ORD 0902 and NSF/ANSI 44 Rated component for material safety
Weight (Valve with Control) 5.34 Ibs (2.42 kg)Recommended Operating Pressure 20 - 120 psi (1.38 - 8.27 bar) Canada 20 - 100 psi (1.38 - 6.89 bar)
Hydrostatic Test Pressure 300 psi (20.69 bar)Water Temperature 35° - 100°F (2° - 38°C)Ambient Temperature* 35° - 120°F (2° - 48.9°C)
*Recommend use of outdoor cover for direct sunlight applications.
OptionsTurbine for Demand Systems Internal Standard Autotrol® 1-inch (25 mm) turbineBypass Valve, Model 1265 Thermoplastic, 1-inch flow path
Bypass Fitting Kits:Copper, Sweat Tube Adapter 1-1/4-inches, 1-inch or 3/4 inch (32 mm, 25 mm or 19 mm)CPVC, Solvent Weld Tube Adapter 1-inch or 3/4-inch (25 mm or 19 mm)Plastic NPT or BSPT Pipe Adapter 1-inch male or 3/4-inch male (25 mm or 19 mm)Stainless Steel NPT or BSPT Pipe Adapter 1-inch male or 3/4-inch male (25 mm or 19 mm)Brine Refill Controls .14 gpm (.53 Lpm) fixed; .33 gpm (1.25 Lpm) fixed; .74 gpm (2.8 Lpm) fixed; 1.3 gpm (4.92 Lpm) fixed
Compatible with Regenerants/Chemicals Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite†, sodium hydroxide†, hydrochloric acid†, chlorine†† and chloramines††
†See owners manual for specific concentrations. ††Valve for use on potable water supply.
SERV
ICE FL
OW –
Cv =
6.5
B
ACKW
ASH
FLOW
– C
v =
4.00
LWR 5730
5 1510 20 25 30 350
2.3 3.4 4.51.10 5.7 6.8 7.9
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0.00
30
25
20
15
10
5
0
Flow Rate (m3/hr)
Flow Rate in Gallons Per Minute
Pre
ssur
e D
rop
in P
SI P
ressure Dro
p (B
ar)
DimensionsValve ConnectionsTank Thread 2-1/2-inches – 8, male Inlet/Outlet Threads 1-3/4-inches – 12 UNC-2A maleDrain Line 3/4-inch NPT, maleBrine Line 3/8-inch NPT, maleDistributor Tube Diameter 1.050 inches (27 mm) Distributor Tube Length 1/2 ± 1/2-inches (13 ± 13 mm) above top of tank
Outline Dimensions
Logix™ Series Controller Flow Rate Characteristics Backwash Flow Control Table
*Backwash flow controls sized for 5.0 gpm/ft2.
Backwash Flow Rate Flow Rate Number* (gpm) (lpm)
7 1.3 4.9
8 1.7 6.4
9 2.2 8.3
10 2.7 10.2
12 3.9 14.76
13 4.5 17.0
14 5.3 20.0
PerformanceFlow Rates (Valve Only)Service @ 15 psi (1.03 bar) drop 25.0 gpm (5.7 m3/h)Backwash @ 25 psi (1.72 bar) drop 20.0 gpm (4.5 m3/h)Service Cv = 6.50 (Kv = 5.6)Backwash Cv = 4.00 (Kv = 3.5)
Units A B C D E F G H I
inchescm
14.937.8
7.819.9
7.117.9
8.521.5
5.012.7
5.313.5
5.814.8
3.48.7
3.48.7
FG
CB
A
E
D
IH
FG
CB
A
E
D
IH
FG
CB
A
E
D
IH
20580 Enterprise Avenue 5730 North Glen Park Road ©2010 Pentair Residential Filtration, LLCBrookfield, WI 53045 Milwaukee, WI 53209 1223489 Rev D FE10Tel: 262.784.4490 Tel: 262.238.4400Fax: 262.784.7794 Fax: 262.238.4402
Customer Care: 800.279.9404 www.pentairwatertreatment.com
Injector* PerformanceLogix™ Series Controllers
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
m3/ hr
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00 LWR6057
bar bar
bar bar
bar bar
20
PSI PSI
PSI PSI
PSI PSI
2 3.5 5 6 7.5
40 60 80 100 120
Injector “F” (Peach)For 7-inch Tanks
0.11
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
m3/ hr
0.50
0.40
0.30
0.20
0.10
0.00LWR6057
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “G” (Tan)For 8-inch Tanks
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
m3/hr
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00LWR6151
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “H” (Light Purple)For 9-inch Tanks
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
m3/hr
0.80
0.60
0.40
0.20
0.00 LWR6151
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “J” (Light Blue)For 10-inch Tanks
0.25
0.20
0.15
0.10
0.05
0.00
3m /hr1.20
1.00
0.80
0.60
0.40
0.20
0.00 LWR6151
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “K” (Pink)For 12-inch Tanks
0.30
0.20
0.10
0.00
m3/hr1.50
1.25
1.00
0.75
0.50
0.25
0.00 LWR6164
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “L” (Orange)For 13- and 14-inch Tanks
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
m3/ hrG
allo
ns p
er M
inut
e
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
Gal
lons
per
Min
ute
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00 LWR6057
bar bar
bar bar
bar bar
20
PSI PSI
PSI PSI
PSI PSI
2 3.5 5 6 7.5
40 60 80 100 120
Injector “F” (Peach)For 7-inch Tanks
0.11
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
m3/ hr
0.50
0.40
0.30
0.20
0.10
0.00LWR6057
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “G” (Tan)For 8-inch Tanks
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
m3/hr
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00LWR6151
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “H” (Light Purple)For 9-inch Tanks
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
m3/hr
0.80
0.60
0.40
0.20
0.00 LWR6151
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “J” (Light Blue)For 10-inch Tanks
0.25
0.20
0.15
0.10
0.05
0.00
3m /hr1.20
1.00
0.80
0.60
0.40
0.20
0.00 LWR6151
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “K” (Pink)For 12-inch Tanks
0.30
0.20
0.10
0.00
m3/hr1.50
1.25
1.00
0.75
0.50
0.25
0.00 LWR6164
20
2 3.5 5 6 7.5
40 60 80 100 120
Injector “L” (Orange)For 13- and 14-inch Tanks
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE
*New injectors for high-efficiency regeneration sequence are standard with Logix Controllers.
NOTE: Actual injector performance is dependent on the resin used, tank geometry, elevated drain, etc. This injector data was taken using an empty tank (no resin).