Transcript

NK Instruments Pvt. Ltd.

501-504, Raunak Arcade, Near THC Hospital, Gokhale Road, Naupada, Thane (W)Maharashtra-400602 India

Contact : 022 25301330/31/32 Mobile : 8108125494

Email : [email protected] Website : www.nkinstruments.com

General

MFSPT-25R1 is a paddle type flow switch suitable for wide range of non-hazardous

liquids. It offers less pressure drop over higher flow rates compared to other paddle

operated flow switches. These flow switches are usually factory set to customized

flow setting requirements for the user.

Operating Principle

The flow monitoring comprises a paddle system to which a permanent magnet is attached at one end. This paddle is pivoted on

the circular disc attached beneath the Hexagonal connector. Above this magnet a Reed switch is attached.

When the flow being monitored pushed against the paddle system, the paddle swings away. This actuates the reed switch

contacts. As soon as the flow is interrupted, the paddle moves back to its starting position, thus de-activates the reed switch

contacts.

Technical Specifications

Max. System Pressure : 20 bar(standard version) high pressure version can be provided on demand

Temperature Range : 10-80oC

Pressure Drop : <80 mbar at Qmax (For Qmax refer flow range table)

Accessories : Refer ordering information

Material of construction : SS 304

Set point tolerance : + - 10%

Repeatability Tolerance : + - 5%

Contact Rating : 1.5A 230VAC SPST Reed Switch

Advantage

Low Pressure Drop

Instant response

High repeatability

Max. Pressure rating 250 bar as an option

Switching function dependent on flow rate alone, not on temperature or pressure

Contact closes when liquid is flowing

Contact opens if flow is interrupted

OEM designed, can be modified as per customer requirement

Flow Rates

For custom flow rates please contact us. We can provide you the customized flow settings.

Installation Instruction

The flow switch can be mounted in a horizontal or vertical pipeline but

must be located in a section of pipe where there is a straight run of at least

5 pipe diameters on each side of the switch.

For detailed Installation please refer the installation manual provided with

flow switch.

Continuous efforts for product development may necessitate changes in these details without notice

FLOW SWITCH – MAGNETIC PADDLE FLOW SWITCH MODEL : FSPT-25R1

Recommended