8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
1/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
1
Board of Public Works: 2016 Project HiFi Highlight
CALL FOR ARTISTS I. Overview:
1. General
1.1. Historic Filipinotown (HiFi), incorporated in 2002, is the first official City
designated district in the United States referencing the Filipino community.
The Project HiFi Highlight is intended to create a sense of place in Historic
Filipinotown that adequately represents its cultural heritage through the
installation of street bus lighting. By doing so, it also provides added safety
to HiFi streets by lighting some of the most used bus stops. Notably, this
project is of national significance and is unprecedented—this is the first time
that a local municipality will install a significant streetscape element that is
unique to the Filipino culture.
2. Project Description:
2.1. The Los Angeles City Council District 13, Board of Public Works/Bureau
of Street Lighting, Department of Transportation and Historic
Filipinotown stakeholders have collaborated to realize a major component of
an existing streetscape masterplan and guidelines developed in 2004 by then
Council Member Eric Garcetti. Entitled“Historic Filipinotown Temple Street
(Glendale to Hoover) Streetscape Masterplan and Guidelines,” it is a goal of
the Masterplan that the street elements have a historical reference and should
be incorporated in the artist-designed settings and amenities.
3. Project Need/Existing Conditions:
3.1. Temple Street is a busy east-west corridor for Historic Filipinotown (HiFi),
and bridges downtown Los Angeles with East Hollywood, Echo Park, and
Silver Lake. Temple Street is similar to a main street for many residents along
this connector, and several community service providers and local institutions
call this part of HiFi their home. The streetlight project aims to enhance
pedestrian safety through improved lighting, while also beautifying the
neighborhood with specially designed art for each light fixture.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
2/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
2
II. Scope of Work & Design Guidelines:
1. Artists must submit renderings of design elements to be used on luminaires1 (listed in
Appendix B) as bus stop lighting in Historic Filipinotown.
1.1. Select one luminaire listed on Appendix B that you will create design elements on.
These design elements will be riveted or spot welded onto the luminaire.
1.2. Design elements should reflect components of the Filipino cultural experience.
1.3. Each bus stop will have three luminaires, each displaying a cultural concept (listed in
Appendix A). Artists must submit three designs, one for each concept in each
luminaire in the following order. Each of the three concepts may have a small plaque
mounted on the street light pole at eye level describing the artist's design.
1.4. The proposed rendering of the design element must be drawn to scale and must
include approximate dimensions and have no more than 3 colors.
1.5. Proposal rendering may be based on a post or hanging street light lantern concept.
2. A typical luminaire will measure 30” tall and 15” wide (see examples on Appendix B)
The selected drawings will become metallic fabrications with dimensions 12” X 12”
installed on a luminaire mounted on a pole approximately 15 ft. high. In addition, artists
may include the following:
2.1. Artists may design “around” and/or “on top” of the luminaire shade (example on
Appendix C).
2.2. Artists may include plaques, medallions, and various design pieces on the pole so
long as it does not exceed 2 feet.
2.3. Artists may propose a different color for poles keeping in mind that the poles will
periodically need to be repainted. However, the standard pallet for poles are Spring
St. Green, Black, and Grey. 3. Top three selected artist designs will be displayed for public comment at SIPA and artists
must attend the public feedback session on 5/3 @ 7 p.m., where they will be presenting
their designs (Note: Artists must cover their own transportation-related expenses.)
III. Timeline:
• Release of Call for Artists
• Informational Session @ Search To Involve Pilipino Americans (SIPA) 3/22 7-8:30 PM.
SIPA is located at 3200 West Temple Street, Los Angeles CA 90026
• Deadline for Submissions: 4/22 5 PM PDT
• Selected Artists Presentation and Public Comment @ SIPA): 5/3 7-9 PM
• Announcement of Winning Design: 5/9
1 Luminaire is a term used to describe a complete lighting unit.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
3/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
3
• Manufacturing & Installation: May to September 2016
• Final Reveal & Ceremony: Mid October 2016
IV. Evaluation Criteria
1. Design thoughtfully incorporates three unifying concepts in luminaires 30 Pts.
2. Design exhibits an aspect of the Filipino experience 30 Pts.
3. Design demonstrates artistic quality, while utilizing cost-efficient materials 25 Pts.
4. Design is drawn to scale and provides approximate specifications 10 Pts.
5. Design uses no more than 3 colors 5 Pts.
Total= 100 Pts.
V. Submission: Please fill out Attachment # 1 and submit with your design using one of
the following methods by April 22, 2016 5 p.m. PDT:
A. Email: Please email in pdf or ai form to [email protected].
B. Mail/In Person: Please send to address belowAttn: Project HiFi Highlight Call for Artists
City of Los Angeles
Board of Public Works
200 North Spring Street, Room 361
Los Angeles, CA 90012-4801
Mail Stop 464
VI. Notification
A. Once your submission(s) and online application form have been received, you
will receive a confirmation email that your submission has been processed. Please
ensure that your Spam filters allow emails from [email protected], as
all correspondence pertaining to this exhibition will come from that account.
VII. Questions
A. If you have any questions or concerns regarding HiFi Highlight Call For
Artists submissions, please send an email to [email protected]
Note to Artists: All submissions must be received no later than April 22, 2016 5:00 p.m. PDT.
All submissions must be the artist’s original work. Accepted work will be notified by the end of
April. If accepted, all work must be submitted via email or to the Board of Public Works by
April 22, 2016. *** Board of Public Works and Bureau of Street Lighting reserve the right to
alter the project timeline and/or re-schedule or cancel this project at any time. ***
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
4/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
4
Artistic Disclaimer: **Selected artist designs will become property of the Board of Public
Works and Bureau of Street Lighting, and we reserve the right to alter artist designs in
order best manufacture and install lighting fixtures.**
***Deadline for Submissions: April 22, 2016 5 p.m. PDT
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
5/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
5
Attachment # 1:
1. First Name, Last Name:
2. Artist Name (if different from above):
3. Current Mailing Address:
4. Contact Phone Number (cell or home):
5. E-Mail Address:
6. Title of Artwork(s):
7. Artist Statement:
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
6/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
6
Appendix A: Three Design Concepts
Design elements must incorporate the core concepts and ideas listed below in the same logical
order. Artists must produce three designs (one for each concept).
1. “Kapwa” or Solidaridad”—Shared humanity, togetherness
1.1. Kapwa, defined as “unity of the one-of-us-and-the-other” according to Virgilio
Enriquez, the Father of Filipino Psychology, is the most prominent core values of the
Filipino community.
1.1.1. Kapwa describes the Filipino core value as practiced through assistance,
hospitality, and unconditional care for one another.
1.1.2. As opposed to the Western’s view of independence and self-reliance, the concept
of “Kapwa” is that success or failure is shared by the whole community—all are
parts of one being.
2. “Lakbay or Jornada”—Journey, travel
2.1. Lakbay or Jornada refers to the journey that individuals and/or families undertake to
come to America. As a destination for many Filipino, Asian and Latino immigrants, HiFi
serves as an entry point and initial home for individuals of diverse backgrounds coming
from different journeys.
3. “Kapayapaan or Armonia”—Peace, harmony
3.1. Kapayapaan and Armonia, meaning peace and harmony, is the foundation of the success
as a collective community. Peace is practiced through tolerance, understanding, andgenuine relationships for each other. Through turmoil, hardships, and disagreements,
harmony and peace can be realized in the community.
Appendix B: Examples of Luminaires
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
7/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
7
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
8/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
8
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
9/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
9
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
10/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
10
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
11/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
11
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
12/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
12
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
13/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
13
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
14/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
14
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
15/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
15
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
16/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
16
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
17/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
17
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
18/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
18
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
19/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
19
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
20/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
20
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
21/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
21
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
22/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
22
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
23/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
23
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
24/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
24
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
25/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
25
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
26/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
26
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
27/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
27
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
28/62
Project HiFi Highlight
Board of Public Works/Bureau of Street Lighting/Council District 13/DOT
28
Appendix C: Examples of Design Elements
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
29/62
ANCESTRASERIES
Product Overview and Technical information>>
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
30/62
luminaire> AT50-SHA-GRD bracket > NM-1A pole > AM6-PS
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
31/62
AT10-SHA-PH AT20-SHA-CPT AT30-SHA-CPT AT40-SHA-CPT AT50-SHA-GRD-NM
ANCESTRAModern Rustic / The Ancestra Series presents a new twiston an old-fashioned design. By combining the best aspects of pastand present forms with the best that modern technology has to of-fer, the Ancestra Series epitomizes Philips Lumec’s design philosophybeautifully: to combine the best technology with an elegant design.
Some luminaires of this serieare IDA (I nternational Dark-SAssociation) approved.
SERIES
>>
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
32/62
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
33/62
To set your projects apart, the Ancestra can be equipped with an optional copper cupola, a decorativecage, and crown accents. The Ancestra is also compatible with our LED light engine, the LifeLED™.Equipped with the LifeLED™ the Ancestra consumes up to 50% less energy and its optics last for 3 to7 times longer HID sources before needing to be replaced. The result is a luminaire that complementsany project with rustic flair and modern appeal without sacrificing photometric quality.
The Ancestra Series is built to perform. Highly efficient IP66 optics are protected from the elementsby our Smartseal™ technology and ensure optimal photometric performance at all times and in allenvironmental conditions. The Ancestra reduces glare by using a unique combination of reflectorsand internal prism refractors and an SCB optical chamber offers exceptional performance and cut-off.The absence of external prisms makes the refractor and lens surface self-cleaning and minimizes thedeterioration of the optical system.
>>
SET YOUR PROJECT APART
BUILT TO PERFORM
luminaire > AT50-SHA-GRD bracket > NM-1A pole > AM6-PS
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
34/62
LUMINAIRESConform to the UL 1598 and CSA C22.2 No. 250.0-08 standards
AT10-SHA-PHEPA: 1.86 sq. ft
Weight: 47 lbs (21.3 kg)
AT30-SHA-DCEPA: 1.86 sq. ft
Weight: 47 lbs (21.3 kg)
AT40-SCB3MEPA: 1.58 sq. ft
Weight: 47 lbs (21.3 kg)
AT50-SHAEPA: 1.35 sq. ft
Weight: 42 lbs (19.1 kg)
AT50-SHA-GRD-CR30EPA: 1.58 sq. ft
Weight: 58 lbs (26.3 kg)
AT20
SCB3M-DAEPA: 1.58 sq. ft
Weight: 47 lbs (21.3 kg)
BENEFITS > Constructed from top-quality materials, the Ancestra Series maintains excellent performance evenin the most demanding environments.
> Smartseal™ optical systems (IP66) virtually eliminate Luminaire Dirt Depreciation (LDD).
> Compatible with the LifeLED™, for up to 50% energy savings and considerably longer life.
> SHA and SSA optical chambers reduce glare by using a unique combination of reflectors and internalprism refractors.
> SCB optical chamber offers exceptional performance and cut-off with a combinationof a hydro-formed aluminum reflector and a tempered glass lens.
2 3 " ( 5 8 4
m m ) L . C .
4 " ( 1 0 2
m m ) T . I .
1 6 1
/ 4 " ( 4 1 3 m
m ) L . C .
1 6 1
/ 4 " ( 4 1 3
m m ) L . C .
4 0 " ( 1 0 1 6
m m
)
3 0 " ( 7 6 2
m m )
3 7 " ( 9 4 0
m m
)
21" (533 mm)
4 1/8" (105 mm) 4 1/8" (105 mm) 4 1/8" (105 mm) 4 1/8" (105 mm)
20 7/8" (530 mm)24 1/8" (26.3 mm)
23 1/4" (591 mm) 24 1/2" (622 mm) 22" (559 mm)
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
LAMPS / LEDLED = Philips Lumileds Luxeon R, CRI = 70, CCT = 4000K (+/- 350K)
System (LED + driver) Rated life = 100,000 hrs1
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2F
35W32LED4K-R-LE3F
35W32LED4K-R-LE4F
35W32LED4K-R-LE5F
55W32LED4K-R-LE2F
55W32LED4K-R-LE3F
55W32LED4K-R-LE4F
55W32LED4K-R-LE5F
55W48LED4K-R-LE2F
55W48LED4K-R-LE3F
55W48LED4K-R-LE4F
55W48LED4K-R-LE5F
55W48LED4K-R-LE2F
80W48LED4K-R-LE3F
80W48LED4K-R-LE4F
80W48LED4K-R-LE5F
3272
3434
3183
3160
4575
4809
4452
4419
4711
4954
4583
4550
6642
6972
6462
6416
35
35
35
35
52
52
52
52
55
55
55
55
79
79
79
79
0.29
0.29
0.29
0.29
0.40
0.40
0.40
0.40
0.38
0.38
0.38
0.38
0.63
0.63
0.63
0.63
0.17
0.17
0.17
0.17
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.36
0.36
0.36
0.36
0.16
0.16
0.16
0.16
0.21
0.21
0.21
0.21
0.23
0.23
0.23
0.23
0.34
0.34
0.34
0.34
0.15
0.15
0.15
0.15
0.19
0.19
0.19
0.19
0.21
0.21
0.21
0.21
0.31
0.31
0.31
0.31
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530
530
70 -100
70 -100
70 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
150 - 175
93.5
98.1
90.9
90.3
88.0
92.5
85.6
85.0
85.6
90.1
83.3
82.7
84.1
88.3
81.8
81.2
B1-U0-G1
B1-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B3-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B3-U0-G1
B2-U0-G1
B2-U0-G1
B2-U0-G2
B3-U0-G1
1 L70 = 100,000 hrs (at ambient temperature = 25°C and forward current = 700 mA)2 System wattage includes the lamp and the LED driver.3 Equivalence should always be confirmed by a photometric layout.
Note : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips.
LED light engine technical information for AT10, AT20, AT30, AT40 with flat lens
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
35/62
LAMPS / LEDLED = Philips Lumileds Luxeon R, CRI = 70, CCT = 4000K (+/- 350K)
System (LED + driver) Rated life = 100,000 hrs1
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2A
35W32LED4K-R-LE3A
35W32LED4K-R-LE4A
55W32LED4K-R-LE2A
55W32LED4K-R-LE3A
55W32LED4K-R-LE4A
55W48LED4K-R-LE2A
55W48LED4K-R-LE3A
55W48LED4K-R-LE4A
80W48LED4K-R-LE2A
80W48LED4K-R-LE3A
80W48LED4K-R-LE4A
3299
3280
2983
4627
4605
4676
4673
4648
4722
6890
6853
6642
35
35
35
52
52
52
55
55
55
79
79
79
0.29
0.29
0.29
0.40
0.40
0.40
0.38
0.38
0.38
0.63
0.63
0.63
0.17
0.17
0.17
0.23
0.23
0.23
0.22
0.22
0.22
0.36
0.36
0.36
0.17
0.17
0.17
0.23
0.23
0.23
0.22
0.22
0.22
0.36
0.36
0.36
0.15
0.15
0.15
0.19
0.19
0.19
0.21
0.21
0.21
0.31
0.31
0.31
0.15
0.15
0.15
0.19
0.19
0.19
0.21
0.21
0.21
0.31
0.31
0.31
70 -100
70 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
94.3
93.7
85.2
89.0
88.6
89.9
85.0
84.5
85.9
87.2
86.7
84.1
B1-U3-G1
B1-U2-G1
B1-U3-G1
B1-U3-G1
B1-U3-G1
B1-U3-G1
B1-U3-G1
B1-U3-G1
B1-U3-G1
B2-U3-G2
B2-U3-G2
B1-U3-G2
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
LED light engine technical information for AT10, AT20, AT30, AT40 with sag lens
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2S
35W32LED4K-R-LE3S35W32LED4K-R-LE4S
35W32LED4K-R-LE5S
55W32LED4K-R-LE2S
55W32LED4K-R-LE3S
55W32LED4K-R-LE4S
55W32LED4K-R-LE5S
55W48LED4K-R-LE2S
55W48LED4K-R-LE3S
55W48LED4K-R-LE4S
55W48LED4K-R-LE5S
80W48LED4K-R-LE2S
80W48LED4K-R-LE3S
80W48LED4K-R-LE4S
80W48LED4K-R-LE5S
3330
35343284
3246
4656
4942
4592
4539
4794
5088
4728
4674
6759
7174
6666
6590
35
3535
35
52
52
52
52
55
55
55
55
79
79
79
79
0.29
0.290.29
0.29
0.40
0.40
0.40
0.40
0.38
0.38
0.38
0.38
0.63
0.63
0.63
0.63
0.17
0.170.17
0.17
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.36
0.36
0.36
0.36
0.16
0.160.16
0.16
0.21
0.21
0.21
0.21
0.23
0.23
0.23
0.23
0.34
0.34
0.34
0.34
0.15
0.150.15
0.15
0.19
0.19
0.19
0.19
0.21
0.21
0.21
0.21
0.31
0.31
0.31
0.31
350
350350
350
530
530
530
530
350
350
350
350
530
530
530
530
70 -100
70 -10070 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
150 - 175
95.1
101.093.8
92.7
89.5
95.0
88.3
87.3
87.2
92.5
86.0
85.0
85.6
90.8
84.4
83.4
B1-U1-G1
B1-U1-G1B1-U1-G1
B2-U1-G1
B1-U1-G1
B1-U1-G1
B1-U1-G1
B3-U1-G1
B1-U1-G1
B2-U1-G1
B1-U1-G1
B3-U1-G1
B2-U1-G1
B2-U1-G2
B2-U1-G2
B3-U1-G1
1 L70 = 100,000 hrs (at ambient temperature = 25°C and forward current = 700 mA)2 System wattage includes the lamp and the LED driver.3 Equivalence should always be confirmed by a photometric layout.
Note : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips.
LED light engine technical information for AT50 with flat lens
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2F
35W32LED4K-R-LE3F
35W32LED4K-R-LE4F
35W32LED4K-R-LE5F
55W32LED4K-R-LE2F
55W32LED4K-R-LE3F
55W32LED4K-R-LE4F
55W32LED4K-R-LE5F
55W48LED4K-R-LE2F
55W48LED4K-R-LE3F
55W48LED4K-R-LE4F
55W48LED4K-R-LE5F
80W48LED4K-R-LE2F
80W48LED4K-R-LE3F
80W48LED4K-R-LE4F
80W48LED4K-R-LE5F
70W64LED4K-R-LE2F
70W64LED4K-R-LE3F70W64LED4K-R-LE4F
70W64LED4K-R-LE5F
110W64LED4K-R-LE2F
110W64LED4K-R-LE3F
110W64LED4K-R-LE4F
110W64LED4K-R-LE5F
90W80LED4K-R-LE2F
90W80LED4K-R-LE3F
90W80LED4K-R-LE4F
90W80LED4K-R-LE5F
135W80LED4K-R-LE2F
135W80LED4K-R-LE3F
135W80LED4K-R-LE4F
135W80LED4K-R-LE5F
3678
3859
3578
3552
5141
5404
5002
4966
5301
5566
5158
5120
7454
7833
7252
7200
7478
78497276
7223
10565
11097
10279
10206
9163
9626
8915
8851
12894
13544
12545
12454
35
35
35
35
52
52
52
52
55
55
55
55
79
79
79
79
71
7171
71
103
103
103
103
87
87
87
87
129
129
129
129
0.29
0.29
0.29
0.29
0.40
0.40
0.40
0.40
0.38
0.38
0.38
0.38
0.63
0.63
0.63
0.63
0.58
0.580.58
0.58
0.8
0.8
0.8
0.8
0.78
0.78
0.78
0.78
1.15
1.15
1.15
1.15
0.17
0.17
0.17
0.17
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.36
0.36
0.36
0.36
0.34
0.340.34
0.34
0.46
0.46
0.46
0.46
0.43
0.43
0.43
0.43
0.61
0.61
0.61
0.61
0.16
0.16
0.16
0.16
0.21
0.21
0.21
0.21
0.23
0.23
0.23
0.23
0.34
0.34
0.34
0.34
0.32
0.320.32
0.32
0.42
0.42
0.42
0.42
0.40
0.40
0.40
0.40
0.58
0.58
0.58
0.58
0.15
0.15
0.15
0.15
0.19
0.19
0.19
0.19
0.21
0.21
0.21
0.21
0.31
0.31
0.31
0.31
0.3
0.30.3
0.3
0.38
0.38
0.38
0.38
0.34
0.34
0.34
0.34
0.5
0.5
0.5
0.5
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530
530
350
350350
350
530
530
530
530
350
350
350
350
530
530
530
530
70 -100
70 -100
70 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
150 - 175
100 - 150
100 - 150100 - 150
100 - 150
175 - 200
175 - 200
175 - 200
175 - 200
150 - 175
150 - 175
150 - 175
150 - 175
250 - 320
250 - 320
250 - 320
250 - 320
105.1
110.2
102.2
101.5
98.9
103.9
96.2
95.5
96.4
101.2
93.8
93.1
94.3
99.2
91.8
91.1
105.3
110.6102.5
101.7
102.6
107.7
99.8
99.1
105.3
110.6
102.5
101.7
100.0
105.0
97.2
96.5
B1-U0-G1
B1-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B3-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B3-U0-G1
B2-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G1
B2-U0-G1
B2-U0-G2B2-U0-G2
B3-U0-G1
B2-U0-G2
B3-U0-G2
B2-U0-G2
B3-U0-G2
B2-U0-G2
B3-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G2
B3-U0-G2
B3-U0-G2
B4-U0-G2
LED light engine technical information for AT10, AT20, AT30, AT40 with prismatic globe
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
36/62
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
1 L70 = 100,000 hrs (at ambient temperature = 25°C and forward current = 700 mA)2 System wattage includes the lamp and the LED driver.3 Equivalence should always be confirmed by a photometric layout.
Note : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips.
LAMPS / LEDLED = Philips Lumileds Luxeon R, CRI = 70, CCT = 4000K (+/- 350K)
System (LED + driver) Rated life = 100,000 hrs1
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2A
35W32LED4K-R-LE3A
35W32LED4K-R-LE4A
55W32LED4K-R-LE2A
55W32LED4K-R-LE3A
55W32LED4K-R-LE4A
55W48LED4K-R-LE2A
55W48LED4K-R-LE3A
55W48LED4K-R-LE4A
80W48LED4K-R-LE2A
80W48LED4K-R-LE3A
80W48LED4K-R-LE4A
70W64LED4K-R-LE2A
70W64LED4K-R-LE3A
70W64LED4K-R-LE4A
110W64LED4K-R-LE2A
110W64LED4K-R-LE3A
110W64LED4K-R-LE4A
90W80LED4K-R-LE2A
90W80LED4K-R-LE3A
90W80LED4K-R-LE4A
135W80LED4K-R-LE2A
135W80LED4K-R-LE3A135W80LED4K-R-LE4A
3694
3918
3693
5164
5478
5163
5325
5648
5324
7486
7941
7486
7511
7967
7510
10612
11256
10611
9204
9763
9203
12950
1373712949
35
35
35
52
52
52
55
55
55
79
79
79
71
71
71
103
103
103
87
87
87
129
129129
0.29
0.29
0.29
0.40
0.40
0.40
0.38
0.38
0.38
0.63
0.63
0.63
0.58
0.58
0.58
0.8
0.8
0.8
0.78
0.78
0.78
1.15
1.151.15
0.17
0.17
0.17
0.23
0.23
0.23
0.22
0.22
0.22
0.36
0.36
0.36
0.34
0.34
0.34
0.46
0.46
0.46
0.43
0.43
0.43
0.61
0.610.61
0.16
0.16
0.16
0.21
0.21
0.21
0.23
0.23
0.23
0.34
0.34
0.34
0.32
0.32
0.32
0.42
0.42
0.42
0.40
0.40
0.40
0.58
0.580.58
0.15
0.15
0.15
0.19
0.19
0.19
0.21
0.21
0.21
0.31
0.31
0.31
0.3
0.3
0.3
0.38
0.38
0.38
0.34
0.34
0.34
0.5
0.50.5
350
350
350
530
530
530
350
350
350
530
530
530
350
350
350
530
530
530
350
350
350
530
530530
70 -100
70 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
100 - 150
100 - 150
100 - 150
175 - 200
175 - 200
175 - 200
150 - 175
150 - 175
150 - 175
250 - 320
250 - 320250 - 320
105.5
111.9
105.5
99.3
105.3
99.3
96.8
102.7
96.8
94.8
100.5
94.8
105.8
112.2
105.8
103.0
109.3
103.0
105.8
112.2
105.8
100.4
106.5100.4
B1-U2-G1
B1-U2-G1
B1-U2-G1
B1-U3-G1
B2-U2-G2
B1-U3-G2
B1-U3-G1
B2-U3-G2
B1-U3-G2
B2-U3-G2
B2-U3-G2
B2-U3-G2
B2-U3-G2
B2-U3-G2
B2-U3-G2
B2-U3-G2
B3-U3-G3
B2-U3-G2
B2-U3-G2
B2-U3-G2
B2-U3-G2
B3-U3-G3
B3-U3-G3B2-U3-G2
LED light engine technical information for AT50 with prismatic globe
LED light engine technical information for AT50 with sag lens
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2S
35W32LED4K-R-LE3S
35W32LED4K-R-LE4S
35W32LED4K-R-LE5S
55W32LED4K-R-LE2S
55W32LED4K-R-LE3S
55W32LED4K-R-LE4S
55W32LED4K-R-LE5S
55W48LED4K-R-LE2S
55W48LED4K-R-LE3S
55W48LED4K-R-LE4S
55W48LED4K-R-LE5S
80W48LED4K-R-LE2S
80W48LED4K-R-LE3S
80W48LED4K-R-LE4S
80W48LED4K-R-LE5S
70W64LED4K-R-LE2S
70W64LED4K-R-LE3S
70W64LED4K-R-LE4S
70W64LED4K-R-LE5S
110W64LED4K-R-LE2S
110W64LED4K-R-LE3S
110W64LED4K-R-LE4S
110W64LED4K-R-LE5S
90W80LED4K-R-LE2S
90W80LED4K-R-LE3S
90W80LED4K-R-LE4S
90W80LED4K-R-LE5S
135W80LED4K-R-LE2S
135W80LED4K-R-LE3S
135W80LED4K-R-LE4S135W80LED4K-R-LE5S
2867
3972
3691
3649
5232
5553
5160
5101
5395
5726
5320
5259
7585
8051
7481
7395
7611
8077
7505
7419
10752
11412
10604
10482
9325
9897
9197
9091
13122
13927
1294112792
35
35
35
35
52
52
52
52
55
55
55
55
79
79
79
79
71
71
71
71
103
103
103
103
87
87
87
87
129
129
129129
0.29
0.29
0.29
0.29
0.40
0.40
0.40
0.40
0.38
0.38
0.38
0.38
0.63
0.63
0.63
0.63
0.58
0.58
0.58
0.58
0.8
0.8
0.8
0.8
0.78
0.78
0.78
0.78
1.15
1.15
1.151.15
0.17
0.17
0.17
0.17
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.36
0.36
0.36
0.36
0.34
0.34
0.34
0.34
0.46
0.46
0.46
0.46
0.43
0.43
0.43
0.43
0.61
0.61
0.610.61
0.16
0.16
0.16
0.16
0.21
0.21
0.21
0.21
0.23
0.23
0.23
0.23
0.34
0.34
0.34
0.34
0.32
0.32
0.32
0.32
0.42
0.42
0.42
0.42
0.40
0.40
0.40
0.40
0.58
0.58
0.580.58
0.15
0.15
0.15
0.15
0.19
0.19
0.19
0.19
0.21
0.21
0.21
0.21
0.31
0.31
0.31
0.31
0.3
0.3
0.3
0.3
0.38
0.38
0.38
0.38
0.34
0.34
0.34
0.34
0.5
0.5
0.50.5
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530530
70 -100
70 -100
70 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
150 - 175
100 - 150
100 - 150
100 - 150
100 - 150
175 - 200
175 - 200
175 - 200
175 - 200
150 - 175
150 - 175
150 - 175
150 - 175
250 - 320
250 - 320
250 - 320250 - 320
81.9
113.5
105.5
104.2
100.6
106.8
99.2
98.1
98.1
104.1
96.7
95.6
96.0
101.9
94.7
93.6
107.2
113.8
105.7
104.5
104.4
110.8
103.0
101.8
107.2
113.8
105.7
104.5
101.7
108.0
100.399.2
B1-U1-G1
B1-U1-G1
B1-U1-G1
B2-U1-G1
B1-U1-G1
B2-U1-G1
B1-U1-G1
B3-U1-G1
B1-U1-G1
B2-U1-G1
B1-U1-G2
B3-U1-G1
B2-U1-G1
B2-U1-G2
B2-U1-G2
B3-U1-G2
B2-U1-G1
B2-U1-G2
B2-U1-G2
B3-U1-G2
B2-U1-G2
B3-U1-G2
B2-U1-G2
B4-U1-G2
B2-U1-G2
B3-U1-G2
B2-U1-G2
B3-U1-G2
B3-U1-G2
B3-U1-G3
B3-U2-G2B4-U2-G2
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
37/62
LAMPS / LED OPTICAL SYSTEMS / LEDFlat lensIP66 rated optical system, composedof individual pre-oriented lens to ac hievedesired distribution, assembled witha tempered-glass flat lens permanentlysealed onto the lower part of the heat sink.
Sag lensIP66 rated optical system, composed
of individual pre-oriented lens to ac hievedesired distribution, assembled witha tempered-glass sag lens permanentlysealed onto the lower part of the heat sink.
Prismatic globeIP66 rated optical system, composedof individual pre-oriented lens to ac hievedesired distribution, assembled with globehaving an inner prismatic surfacepermanently sealed onto the lowerpart of the heat sink.
LE2F: AsymetricalLE3F: AsymetricalLE4F: AsymetricalLE5F: Symmetrical (square)
> House shield availablein option (HS)
LE2S: AsymetricalLE3S: AsymetricalLE4S: AsymetricalLE5S: Symmetrical (square)> House shield available
in option (HS)
LE2A: AsymetricalLE3A: AsymetricalLE4A: Asymetrical
> House shield availablein option (HS)
* Photometry available on Philips Lumec web site www.philips.com/lumec.
VOLTAGE120 / 208 / 240 / 277 / 347 / 480
LAMPS / HID OPTICAL SYSTEMS / HID (Lamps not included)SHA and SSA opticsSealed optical chamber consisting of areflector permanently assembled on topof an internal prismatic globe.
SCB opticsSealed optical chamber consisting of areflector permanently assembled on topof a tempered-glass sag lens.
SHA3M: AsymmetricalSSA3M: Asymmetrical
> House shield availablein option (HS)
SCB3M: Asymmetrical
> House shield availablein option (HS)
In the above optics, the sleeve and shutter permit exact positioning of the lamp.
* Photometry available on Philips Lumec web site www.philips.com/lumec.
In the above optics, the sleeve and shutter permit exact positioning of the lamp.SHA & SSA refractors available in: ACDR : Acrylique (175 W max.) PC : Polycarbonate
Add suffix to optical system code.
WAT TAGE SCB3M / SHA 3M-P C / SSA 3M-PC SHA 3M-ACDR / SSA 3M -ACDR
50 MH, medium
70 MH, medium
100 MH, medium
150 MH, medium
200 MH, mogul
175 PSMH, mogul
250 PSMH, mogul
35 HPS, medium
50 HPS, mogul
70 HPS, mogul
100 HPS, mogul
150 HPS, mogul
200 HPS, mogul
250 HPS, mogul
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
N/A
3
N/A
3
3
3
3
3
N/A
N/A
3 : Available N/A : Not available
WAT TAGE SCB3M / SHA3M -PC / SSA 3M -PC SHA3M -ACDR / SSA3M -ACDR
60 CW
90 CW
3
3
3
3
3 : Available
CosmoPolisTM / new generation of ceramic metal halide lamp VOLTAGEHID 1: 120 / 208 / 240 / 277 / 347 / 480
CosmoPolisTM: 120 / 208 / 240 / 277
1 Multi-top ballast also available.
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
38/62
LAMPS / QL OPTICAL SYSTEMS / QL (Lamps included)
SHA opticsSealed optical chamber consisting of areflector permanently assembled on topof an internal prismatic globe.
SCB5 opticsSealed optical chamber consisting of areflector permanently assembled on topof a tempered-glass sag lens.
SHA: Asymmetrical
> House shield availablein option (HS)
SCB5: Symmetrical
* Photometry available on Philips Lumec web site www.philips.com/lumec.
SHA refractors available in: ACDR : Acrylique (175 W max.) PC : Polycarbonate Add suffix to optical system code.
WATTAGE SCB5 SHA
55 QL
85 QL
3
3
3
3
3 : Available
High frequency generator for induction lamp (4000K).
Instant start. Operating range 50-60 Hz or DC.Lamp minimum starting temperature -40F (-40 °C).
VOLTAGE120 / 208 / 240 / 277
LUMINAIRE OPTIONS
MOUNTINGS(Consult the Pole Guide for details and the complete line of mountings)
POLES ANDPOLE OPTIONS(Consult the Pole Guide for details and the complete line of poles)
FN Decorative finial (see on the right) FNC Copper-color painted finial (except AT50) DA Decorative arches
DC Decorative caps
CPT Copper cupolaCPTC Varnished copper cupola (except AT50)
GRD Decorative grid (AT50 only)
CR20 Decorative crown (AT50 only)
CR30 Decorative crown (AT50 only) CR40 Decorative crown (AT50 only) HS House shield
PH Photoelectric cell (except AT50)
FINIALS
FN1 FN2 FN3 FN6 FN8
FINISHES(Consult Philips Lumec’s Color Chart for complete specifications)
The specially formulated Lumital powder coat finish
is available in a range of many standard colors.
CRA CRC CRD CRF
RTA906/907 RTA400 R80-TBC1SSM8
ORDERING SAMPLELUMINAIRE LAMP GLOBE/LENS OPTICAL SYSTEM VOLTAGE OPTIONS MOUNTING & CONFIGURATION POLE FINISH
AT10 90W49LED4K ACDR LE3A 240 CPTC CRA-1A R80A-12 GN6TX
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
39/62
Luminaire: AT30-SHA Luminaire: AT10-SHA Luminaire: AT50-SHA-GR-CR30 Luminaire: AT40-SCB Luminaire: AT50-SHA
Mounting: CRE-2 Pole: APR4-LBC3-SA1 Mounting: CRAT-1A Mounting: CRC-1A Mounting: RM-2
Pole: RTA927-PS Pole: RTA906/907-PSCRA Pole: RA61-BA Pole: SSM8
MAINTENANCE
ACCESS TO INTERNAL COMPONENTThe luminaire’s hood is opened pressing the button
located on the technical ring. The hood can then be
pivoted along a hinge incorporated in the technical
ring. A built-in stopper holds the cover open at a
confortable angle for clear access to the internal
luminaire components.
ACCESS TO LAMPA simple quarter-turn of the SmartsealTM shutterprovides easy access to the lamp. Quick-disconnect
terminals between the lamp and the ballast tray
ensure safe and easy lamp replacement.
ACCESS TO BALLASTThe tool-free drop-in unitized ballast tray is slipped
into the post top box which rests on the optical sup-
port plate. Here again, the use of quick-disconnect
terminals ensures safe and easy ballast maintenance.
ASSEMBLY EXAMPLES
18
5.49
22
6.71
16
4.88
20
6.10
7.32
14
4.27
12
3.66
10
3.05
8
2.44
6
1.83
4
1.22
2
0.61
ft
m
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
40/62
luminaire> AT20-SHA-CPTpole > APR4-PS
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
41/62
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
© 2014 Koninklijke Philips N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
42/62
RENAISSANCESERIES
Product Overview and Technical information>>
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
43/62
luminaire > RN20-THB-ACDR bracket > NM-1Apole > P805S-BAD-PSSLF
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
44/62
RN20-SMA-CRM6 RN30-DE1-SMA-MR RNS30-SM-RNA
Some luminaires of this serieare IDA (I nternational Dark-SAssociation) approved.
RENAISSANCESERIESDesigned to Exceed / The Renaissance Series mixesrefinement together with ambition. The design reflects and evokeslate 19th and early 20th century styling, perfectly suited for mosturban and rural areas, while the state-of-the-art technology insideassures exceptional photometric performance, a long lifespan, andease of maintenance.>>
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
45/62
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
46/62
REFINED TECHNOLOGY
REFINED ELEGANCE
At the core of this magnificent historically inspired luminaire lives modern state-of-the-art technology.Smartseal™ optical systems (IP66) virtually eliminate Luminaire Dirt Depreciation, THA, THB and THCoptical chambers reduce glare by using a unique combination of reflectors and internal prism refractors,toolfree access makes maintenance a breeze, and since it’s entirely constructed from top-quality materials,the Renaissance Series maintains excellent performance in even the most demanding environments.
Designed to exceed the aesthetic expectations of city planners, lighting designers, and other outdoorlighting professionals, the Renaissance stands as a tribute to history. Refined elegance never goes out ofstyle, never depreciates in beauty, and always adds a feeling of dignity and sophistication to any area orproject.
>>
luminaire> RN20-THB-ACDRbracket > NM-1Apole > P805S-BAD-PSSLF
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
47/62
RNS20-ACDREPA: 1.35 sq. ft
Weight AC:32 lbs (14.5 kg)
Weight GL:42 lbs (19.1 kg)
RNS30-ACDREPA: 1.43 sq. ft
Weight AC:37 lbs (16.8 kg)
Weight GL:47 lbs (21.3 kg)
RN20-THA3-GL-SMAEPA: 2.63 sq. ft
Weight AC: 45 lbs (20 kg)Weight GL: 60 lbs (27 kg)
BENEFITS > Designed in response to the needs of planners, lighting designers, landscape architects, and otheroutdoor lighting professionals.
> Highly customizable with available cages, crowns and decorative deflectors.
> Toolfree access to lamp and electrical components for ease of maintenance.
> Smartseal™ optical systems (IP66) virtually eliminate Luminaire Dirt Depreciation (LDD).
> Comes standard with the most efficient HID optics available on the market.
> Available with optional LifeLED™ optics that can reduce energy consumption by up to 50 % withoutsacrificing photometric performance.
RN30-THA3-ACDREPA : 1.90 sq. ft
Weight AC : 36 lbs (17 kg)Weight GL : 52 lbs (23 kg)
RN20-LE3R-ACDREPA : 1.90 sq. ft
Weight AC : 34 lbs (15 kg)Weight GL : 49 lbs (22 kg)
LUMINAIRESConform to the UL 1598 and CSA C22.2 No. 250.0-08 standards
4 0 " ( 1 0 1 6
m m )
2 8 " ( 7 1 1
m m )
2 4 1
/ 4 " ( 6 1
6 m
m ) L . C .
1 6 " ( 4 0
6 m
m ) L . C .
2 8 " ( 7 1 1
m m )
1 6 " ( 4 0
6 m
m ) L . C .
10 1/2" (267 mm)
1 3
1 / 4 " ( 3 3 7
m m )
3 5
1 / 2 " ( 9 0 2
m m )
1 9 3
/ 4 " ( 5 0 2
m m ) L . C .
18" (457 mm)
3 5
1 / 2 " ( 9 0 2
m m )
1 9 3
/ 4 " ( 5 0 2
m m ) L . C .
18" (457 mm) 18" (457 mm) 14 1/4" (362 mm) 14 1/4" (362 mm)
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
48/62
LAMPS / LEDLED = Philips Lumileds Luxeon R, CRI = 70, CCT = 4000K (+/- 350K)
System (LED + driver) Rated life = 100,000 hrs1
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2F
35W32LED4K-R-LE3F
35W32LED4K-R-LE4F
35W32LED4K-R-LE5F
55W32LED4K-R-LE2F
55W32LED4K-R-LE3F
55W32LED4K-R-LE4F
55W32LED4K-R-LE5F
55W48LED4K-R-LE2F
55W48LED4K-R-LE3F
55W48LED4K-R-LE4F
55W48LED4K-R-LE5F
80W48LED4K-R-LE2F
80W48LED4K-R-LE3F
80W48LED4K-R-LE4F
80W48LED4K-R-LE5F
70W64LED4K-R-LE2F
70W64LED4K-R-LE3F
70W64LED4K-R-LE4F
70W64LED4K-R-LE5F
110W64LED4K-R-LE2F
110W64LED4K-R-LE3F110W64LED4K-R-LE4F
110W64LED4K-R-LE5F
90W80LED4K-R-LE2F
90W80LED4K-R-LE3F
90W80LED4K-R-LE4F
90W80LED4K-R-LE5F
135W80LED4K-R-LE2F
135W80LED4K-R-LE3F
135W80LED4K-R-LE4F
135W80LED4K-R-LE5F
3678
3859
3578
3552
5141
5404
5002
4966
5301
5566
5158
5120
7454
7833
7252
7200
7478
7849
7276
7223
10565
1109710279
10206
9163
9626
8915
8851
12894
13544
12545
12454
35
35
35
35
52
52
52
52
55
55
55
55
79
79
79
79
71
71
71
71
103
103103
103
87
87
87
87
129
129
129
129
0.29
0.29
0.29
0.29
0.40
0.40
0.40
0.40
0.38
0.38
0.38
0.38
0.63
0.63
0.63
0.63
0.58
0.58
0.58
0.58
0.8
0.80.8
0.8
0.78
0.78
0.78
0.78
1.15
1.15
1.15
1.15
0.17
0.17
0.17
0.17
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.36
0.36
0.36
0.36
0.34
0.34
0.34
0.34
0.46
0.460.46
0.46
0.43
0.43
0.43
0.43
0.61
0.61
0.61
0.61
0.16
0.16
0.16
0.16
0.21
0.21
0.21
0.21
0.23
0.23
0.23
0.23
0.34
0.34
0.34
0.34
0.32
0.32
0.32
0.32
0.42
0.420.42
0.42
0.40
0.40
0.40
0.40
0.58
0.58
0.58
0.58
0.15
0.15
0.15
0.15
0.19
0.19
0.19
0.19
0.21
0.21
0.21
0.21
0.31
0.31
0.31
0.31
0.3
0.3
0.3
0.3
0.38
0.380.38
0.38
0.34
0.34
0.34
0.34
0.5
0.5
0.5
0.5
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530
530
350
350
350
350
530
530530
530
350
350
350
350
530
530
530
530
70 -100
70 -100
70 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
150 - 175
100 - 150
100 - 150
100 - 150
100 - 150
175 - 200
175 - 200175 - 200
175 - 200
150 - 175
150 - 175
150 - 175
150 - 175
250 - 320
250 - 320
250 - 320
250 - 320
105.1
110.2
102.2
101.5
98.9
103.9
96.2
95.5
96.4
101.2
93.8
93.1
94.3
99.2
91.8
91.1
105.3
110.6
102.5
101.7
102.6
107.799.8
99.1
105.3
110.6
102.5
101.7
100.0
105.0
97.2
96.5
B1-U0-G1
B1-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B3-U0-G1
B1-U0-G1
B2-U0-G1
B1-U0-G1
B3-U0-G1
B2-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G1
B2-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G1
B2-U0-G2
B3-U0-G2B2-U0-G2
B3-U0-G2
B2-U0-G2
B3-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G2
B3-U0-G2
B3-U0-G2
B4-U0-G2
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
TYPICALCURRENT
@ 347 V (A)
TYPICALCURRENT
@ 480 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2R
35W32LED4K-R-LE3R
35W32LED4K-R-LE4R
35W32LED4K-R-LE5R
55W32LED4K-R-LE2R
55W32LED4K-R-LE3R
55W32LED4K-R-LE4R
55W32LED4K-R-LE5R
55W48LED4K-R-LE2R
55W48LED4K-R-LE3R
55W48LED4K-R-LE4R
55W48LED4K-R-LE5R
80W48LED4K-R-LE2R
80W48LED4K-R-LE3R
80W48LED4K-R-LE4R
80W48LED4K-R-LE5R
70W64LED4K-R-LE2R
70W64LED4K-R-LE3R
70W64LED4K-R-LE4R
70W64LED4K-R-LE5R
110W64LED4K-R-LE2R110W64LED4K-R-LE3R
110W64LED4K-R-LE4R
110W64LED4K-R-LE5R
90W80LED4K-R-LE2R
90W80LED4K-R-LE3R
90W80LED4K-R-LE4R
90W80LED4K-R-LE5R
135W80LED4K-R-LE2R
135W80LED4K-R-LE3R
135W80LED4K-R-LE4R
135W80LED4K-R-LE5R
3898
3816
3844
3867
5510
5388
5435
5467
5779
5588
5700
5733
8198
7863
8086
8133
7768
7722
7821
7867
1093510798
10870
10933
9677
9429
9544
9600
13440
13061
13256
13333
35
35
35
35
52
52
52
52
55
55
55
55
79
79
79
79
71
71
71
71
103103
103
103
87
87
87
87
129
129
129
129
0.29
0.29
0.29
0.29
0.40
0.40
0.40
0.40
0.38
0.38
0.38
0.38
0.63
0.63
0.63
0.63
0.58
0.58
0.58
0.58
0.800.80
0.80
0.80
0.78
0.78
0.78
0.78
1.15
1.15
1.15
1.15
0.17
0.17
0.17
0.17
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.36
0.36
0.36
0.36
0.34
0.34
0.34
0.34
0.460.46
0.46
0.46
0.43
0.43
0.43
0.43
0.61
0.61
0.61
0.61
0.16
0.16
0.16
0.16
0.21
0.21
0.21
0.21
0.23
0.23
0.23
0.23
0.34
0.34
0.34
0.34
0.32
0.32
0.32
0.32
0.420.42
0.42
0.42
0.40
0.40
0.40
0.40
0.58
0.58
0.58
0.58
0.15
0.15
0.15
0.15
0.19
0.19
0.19
0.19
0.21
0.21
0.21
0.21
0.31
0.31
0.31
0.31
0.30
0.30
0.30
0.30
0.380.38
0.38
0.38
0.34
0.34
0.34
0.34
0.50
0.50
0.50
0.50
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.17
0.17
0.17
0.17
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.340.34
0.34
0.34
0.30
0.30
0.30
0.30
0.43
0.43
0.43
0.43
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.13
0.13
0.13
0.13
0.18
0.18
0.18
0.18
0.20
0.20
0.20
0.20
0.280.28
0.28
0.28
0.25
0.25
0.25
0.25
0.35
0.35
0.35
0.35
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530
530
350
350
350
350
530530
530
530
350
350
350
350
530
530
530
530
70-100
70-100
70-100
70-100
70-100
70-100
70-100
70-100
70-100
70-100
70-100
70-100
100-150
100-150
100-150
100-150
100-150
100-150
100-150
100-150
150-175150-175
150-175
150-175
100-150
100-150
100-150
100-150
200-250
200-250
200-250
200-250
111.4
109.0
109.8
110.5
106.0
103.6
104.5
105.1
105.1
101.6
103.6
104.2
103.8
99.5
102.4
102.9
109.4
108.8
110.2
110.8
106.2104.8
105.5
106.1
111.2
108.4
109.7
110.3
104.2
101.2
102.8
103.4
B1-U0-G1
B1-U0-G1
B1-U0-G1
B3-U0-G1
B1-U0-G1
B2-U0-G2
B1-U0-G2
B3-U0-G1
B2-U0-G2
B2-U0-G2
B1-U0-G2
B3-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3B3-U0-G3
B2-U0-G2
B4-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B4-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B4-U0-G2
LED light engine technical information for RN20, RN30 with flat lens
LED light engine technical information for RN20, RN30 with prismatic globe
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
1 L70 = 100,000 hrs (at ambient temperature = 25°C and forward current = 700 mA)2 System wattage includes the lamp and the LED driver.3 Equivalence should always be confirmed by a photometric layout.
Note : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
49/62
OPTICAL SYSTEMS / LEDFlat lensIP66 rated optical system, composedof individual pre-oriented lens to ac hievedesired distribution, assembled witha tempered-glass flat lens permanentlysealed onto the lower part of the heat sink.
Sag lensIP66 rated optical system, composedof individual pre-oriented lens to ac hievedesired distribution, assembled witha tempered-glass sag lens permanentlysealed onto the lower part of the heat sink.
Prismatic globe
IP66 rated optical system, composed ofindividual pre-oriented lens to achievedesired distribution, assembled with globehaving an inner prismatic surfacepermanently sealed onto the lowerpart of the heat sink.
Add suffix ACDR or GL to optical system code.
* Photometry available on Philips Lumec’s web site www.philips.com/lumec.
VOLTAGE120 / 208 / 240 / 277 / 347 / 480 LE2F: Asymetrical
LE3F: AsymetricalLE4F: AsymetricalLE5F: Symmetrical (square)
> House shield available in option (HS)
LE2S: AsymetricalLE3S: AsymetricalLE4S: AsymetricalLE5S: Symmetrical (square)
> House shield available in option (HS)
LE2R: AsymetricalLE3R: Asymetrical
LE4R: Asymetrical> LE5R: Symmetrical available
in acrylic and borosilicate.
> House shield available in option (HS)
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
LAMPS / LEDLED = Philips Lumileds Luxeon R, CRI = 70, CCT = 4000K (+/- 350K)
System (LED + driver) Rated life = 100,000 hrs1
LAMP
TYPICALDELIVERED
LUMENS
TYPICALSYSTEM
WATTAGE 2 (W)
TYPICALCURRENT
@ 120 V (A)
TYPICALCURRENT
@ 208 V (A)
TYPICALCURRENT
@ 240 V (A)
TYPICALCURRENT
@ 277 V (A)
LEDCURRENT
(mA)HID
EQUIVALENT 3
LUMINAIREEFFICACY RATING
(LM/W)BUG
RATING
35W32LED4K-R-LE2S
35W32LED4K-R-LE3S
35W32LED4K-R-LE4S
35W32LED4K-R-LE5S
55W32LED4K-R-LE2S
55W32LED4K-R-LE3S
55W32LED4K-R-LE4S
55W32LED4K-R-LE5S
55W48LED4K-R-LE2S
55W48LED4K-R-LE3S
55W48LED4K-R-LE4S
55W48LED4K-R-LE5S
80W48LED4K-R-LE2S
80W48LED4K-R-LE3S
80W48LED4K-R-LE4S
80W48LED4K-R-LE5S
70W64LED4K-R-LE2S
70W64LED4K-R-LE3S
70W64LED4K-R-LE4S
70W64LED4K-R-LE5S
110W64LED4K-R-LE2S
110W64LED4K-R-LE3S110W64LED4K-R-LE4S
110W64LED4K-R-LE5S
90W80LED4K-R-LE2S
90W80LED4K-R-LE3S
90W80LED4K-R-LE4S
90W80LED4K-R-LE5S
135W80LED4K-R-LE2S
135W80LED4K-R-LE3S
135W80LED4K-R-LE4S
135W80LED4K-R-LE5S
2867
3972
3691
3649
5232
5553
5160
5101
5395
5726
5320
5259
7585
8051
7481
7395
7611
8077
7505
7419
10752
1141210604
10482
9325
9897
9197
9091
13122
13927
12941
12792
35
35
35
35
52
52
52
52
55
55
55
55
79
79
79
79
71
71
71
71
103
103103
103
87
87
87
87
129
129
129
129
0.29
0.29
0.29
0.29
0.40
0.40
0.40
0.40
0.38
0.38
0.38
0.38
0.63
0.63
0.63
0.63
0.58
0.58
0.58
0.58
0.8
0.80.8
0.8
0.78
0.78
0.78
0.78
1.15
1.15
1.15
1.15
0.17
0.17
0.17
0.17
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.36
0.36
0.36
0.36
0.34
0.34
0.34
0.34
0.46
0.460.46
0.46
0.43
0.43
0.43
0.43
0.61
0.61
0.61
0.61
0.16
0.16
0.16
0.16
0.21
0.21
0.21
0.21
0.23
0.23
0.23
0.23
0.34
0.34
0.34
0.34
0.32
0.32
0.32
0.32
0.42
0.420.42
0.42
0.40
0.40
0.40
0.40
0.58
0.58
0.58
0.58
0.15
0.15
0.15
0.15
0.19
0.19
0.19
0.19
0.21
0.21
0.21
0.21
0.31
0.31
0.31
0.31
0.3
0.3
0.3
0.3
0.38
0.380.38
0.38
0.34
0.34
0.34
0.34
0.5
0.5
0.5
0.5
350
350
350
350
530
530
530
530
350
350
350
350
530
530
530
530
350
350
350
350
530
530530
530
350
350
350
350
530
530
530
530
70 -100
70 -100
70 -100
70 -100
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
100 - 150
150 - 175
150 - 175
150 - 175
150 - 175
100 - 150
100 - 150
100 - 150
100 - 150
175 - 200
175 - 200175 - 200
175 - 200
150 - 175
150 - 175
150 - 175
150 - 175
250 - 320
250 - 320
250 - 320
250 - 320
81.9
113.5
105.5
104.2
100.6
106.8
99.2
98.1
98.1
104.1
96.7
95.6
96.0
101.9
94.7
93.6
107.2
113.8
105.7
104.5
104.4
110.8103.0
101.8
107.2
113.8
105.7
104.5
101.7
108.0
100.3
99.2
B1-U1-G1
B1-U1-G1
B1-U1-G1
B2-U1-G1
B1-U1-G1
B2-U1-G1
B1-U1-G1
B3-U1-G1
B1-U1-G1
B2-U1-G1
B1-U1-G2
B3-U1-G1
B2-U1-G1
B2-U1-G2
B2-U1-G2
B3-U1-G2
B2-U1-G1
B2-U1-G2
B2-U1-G2
B3-U1-G2
B2-U1-G2
B3-U1-G2B2-U1-G2
B4-U1-G2
B2-U1-G2
B3-U1-G2
B2-U1-G2
B3-U1-G2
B3-U1-G2
B3-U1-G3
B3-U2-G2
B4-U2-G2
LED light engine technical information for RN20, RN30 with sag lens
1 L70 = 100,000 hrs (at ambient temperature = 25°C and forward current = 700 mA)2 System wattage includes the lamp and the LED driver.3 Equivalence should always be confirmed by a photometric layout.
Note : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
50/62
LUMINAIRE OPTIONS ADAPTORSMA1The luminaire is suspended by means of a mounting adaptor with a 1 1/4 ‘‘ (32mm)npt threaded hole accepting a threaded tube from the mounting. (retrofit adaptorfor existing mounting)
MA2 1 1/2 ‘‘ (38mm) npt threaded hole accepting a threaded tube from the mounting.(retrofit adaptor for existing mounting)
SMAThe luminaire is suspended by means of a decorative side-mounting cast-aluminumadaptor. This adaptor accepts tubes from 1 5/8‘‘ to 2 3/8 ‘‘ (41 to 60 mm) and isadjustable to more or less than 5
0. The adaptor features a cast-aluminum
decorative cover and finial.
FS FusingHS House shieldPH7 Button-type photoelectric cell
PH8 Quarter-turn photoelectric cell(Complete with decorative cover and finial. Available with SMA option only)
CR1 Decorative crown #1
DC1 4 decorative hooksDE1
Decorative deflector
LAMPS / HID OPTICAL SYSTEMS / HID (Lamps not included)
THA optics (RN20/RN30)Sealed optical chamber consisting ofa reflector permanently assembled of topof an internal prismatic globe.Horizontal lamp.
RN20 / RN30 RNS20 / RNS30
THB optics (RN20/RN30)Sealed optical chamber consisting of
a reflector permanently assembled of topof an internal prismatic globe.Vertical lamp.
THC/TSC optics (RNS20/RNS30)Optical system with an identical structureas the THB with a vertical reflector.Made for lower mounting heights.
THA3: Asymetrical
> House shield availablein option (HS)
THB3: Asymetrical
> House shield availablein option (HS)
THC3: AsymetricalTSC3: Asymetrical
> House shield availablein option (HS)
In the above optics, the sleeve and shutter permit exact positioning of the lamp.THA & THB refrators available in:
ACDR : Acrylique (max.250 W: THA, 200 W: THB) GL : Borosilicate glass Add suffix to optical system code.
* Photometry available on Philips Lumec we b site www.philips.com/lumec.
WATTAGETHA3-GLTHB3-GL
THA3-ACDRTHB3-ACDR
THB3-ACDRTHC3-ACDRTSC3-ACDR
THC3-GLTSC3-GL
50 MH, medium
70 MH, medium
100 MH, medium
150 MH, medium
175 MH, mogul 200 MH, mogul
250 MH, mogul
400 MH, mogul
50 HPS, mogul
70 HPS, mogul
100 HPS, mogul
150 HPS, mogul
200 HPS, mogul
250 HPS, mogul
400 HPS, mogul
N/A
N/A
N/A
N/A
N/A
N/A
RB
N/A
N/A
N/A
N/A
N/A
RB
RB
N/A
RB
RB
N/A
: Available N/A : Not available RB : Remote Ballast Required
VOLTAGE120 / 208 / 240 / 277 / 347 / 480> Multi-top ballast also available.
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
51/62
MOUNTINGS(Consult the Pole and bracket Guide for details and the complete line of mountings)
POLES ANDPOLE OPTIONS(Consult the Pole and bracket Guide for details and the complete line of poles)
IF NM YR4/YR6/YR8 PR4/PR6/PR8
RS61 RS856 R92
DMG (available with LifeLED and LEDgine*) Driver is compatible with dimmer from 0 to 10 volts.
CDMG (available with LifeLED and LEDgine*) Dynadimmer standard dimming functionalities including pre-programmed
scenarios to suit many applications and needs from safety to maximumenergy savings. (see Dynadimmer brochure for more information on pre-programmed scenarios)
CDMGP (available with LifeLED and LEDgine*) Dynadimmer custom dimming scenario allowing the user to program
up to 5 time periods and multiple dimming levels from 100% to 10%of total wattage.
OVR (available with LEDgine* only) Dynadimmer override function offering the possibility to go back
to full power at any time via an electrical signal of 120VAC to 277VACfrom a motion sensor, a switch, a relay or else.
CLO (available with LEDgine* only) Pre-set driver to manage the lumen depreciation by adjusting the power
given to the LEDs offering the same lighting intensity during the entirelifespan of the lamp.
AST (available with LEDgine* only)
Pre-set driver for progressive start-up of the lamp to optimize energymanagement and enhance user visual comfort at start-up.
OTL (available with LEDgine* only) Pre-set driver to signal end of life of the lamp for better fixture management.
DALI (available with LEDgine* only)
Pre-set driver compatible with the DALI control system.
* Not available with 347 and 480 volt.
SMART LUMINAIREOPTIONSRenaissance allows you many options in order to getdifferent smart functionalities.
SMART SYSTEMOPTIONSDifferent options are available according to your needsPlease contact us for more information.
AMPLIGHT (available with LEDgine* only) Amplight is the intelligent monitoring and control, automated management systemthat delivers up to 35% streetlight energy savings and makes it easy to monitor and
manage the entire system, in real time. Please contact us for more information.
* Not available with 347 and 480 volt.
Other options are also available according to your needs. Please contact us for more information.
SMART CITYOPTIONS
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
52/62
ASSEMBLY EXAMPLES
Luminaire: RN30-THA3-SMA Luminaire: RN20-THA3 Luminaire: RN20-THA3-SMA Luminaire: RNS20-THC3-YM Luminaire: RN30-THA3 Mounting: CJL8-1A Mounting: NM-1A Mounting: PR8-1A Pole: RTA906/907 Mounting: MM-2 Pole: RTA92-BA Pole: RA56-FH Pole: SSM8-PS Pole: RA61
18
5.49
22
6.71
16
4.88
20
6.10
14
4.27
12
3.66
10
3.05
8
2.44
6
1.83
4
1.22
2
0.61
ft
m
FINISHES(Consult Philips Lumec’s Color Chart for complete specifications)
The specially formulated Lumital powder coat finish is available in a range of many standard colors.
ORDERING SAMPLELUMINAIRE LAMP GLOBE/LENS OPTICAL SYSTEM VOLTAGE ADAPTOR OPTIONS MOUNTING & CONFIGURATION POLE FINISH
RN20 90W49LED4K ACDR LE3R 240 SMA CR1 PR6-1A R92-25 GN6TX
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.For the latest updates go to www.philips.com/lumec.
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
53/62
luminaire> RN20-THA3-ACDR-SMAbracket > CJL5.5-1Apole > R100D
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
54/62
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
© 2014 Koninklijke Philips N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
55/62
Solano Canyon Project no ROAM (65772)
LCP59337-65772-32(SA)IT.doc04-09-2014 Page 1 / 6
Qty 1 Luminaire [S41-001]-90W49LED4K-ES-ACDR-C-LE3-120-SF41-CHR-SQD-[MC-054]
Description of Components:
Finial: Decorative cast 356 aluminum, mechanically assembled.
Hood: In a square tapered shape, the hood is made of a one-piece die cast injection moulded A360 aluminiumMechanically assembled to the guard. Complete with a bent aluminum sheet extension, to receive Chinese decorativeelements. Decorative elements to be casted 356.1 aluminum.
Guard: In a square tapered shape, the guard is made of one-piece die cast injection moulded A360 aluminium.
Access-Mechanism: Two integrated hinges on the hood with a stopper and a latch shall offer a tool-free access to theinside of the luminaire. An embedded memory-retentive gasket shall ensure weatherproofing.
Light Engine: LifeLED™ composed of 4 main components: LED lamp / Optical System / Heat Sink / Driver Electrical components are RoHS compliant.
Globe: (ACDR-C), Made of one-piece seamless injected-moulded clear impact-resistant (DR) acrylic. The globe isassembled on the access-mechanism.
Lamp: LED Module (Included), LED type Philips Lumileds Rebel ES. Composed of 49 high-performance white LEDs, 90wlamp wattage. Color temperature of 4000 Kelvin nominal, 70 CRI. Operating lifespan after which the system emits 70% of itsoriginal lumen output, all of those parameters are tested for 100% of light engines. Use of a metal core board insures greateheat transfer and longer lifespan of the light engine.
EPA: 3.25 sq ft / weight: 61 lb (27.7 kg) Note: 3D image may not represent color or option selected.
Logos above include link, click to access.
http://www.lumec.com/products/lifeLED/lifeLED.html?Ahttp://www.lumec.com/Lumec3Dv2/home/index_en.php
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
56/62
Solano Canyon Project no ROAM (65772)
LCP59337-65772-32(SA)IT.doc04-09-2014 Page 2 / 6
Optical System: (LE3), IES type III (asymmetrical). Composed of high-performance acrylic collimators, optimized withvarying beam angles to achieve desired distribution. System is rated IP66. Performance shall be tested per LM-63 andLM-79 (IESNA) certifying its photometric performance. Street-side indicated.
Heat Sink: Made of cast aluminum optimising the LEDs efficiency and life. Product does not use any cooling device withmoving parts (only passive cooling device)
Driver: High power factor of 90%. Electronic driver, operating range 50/60 Hz. Auto-adjusting to a voltage between 120and 277 volt AC rated for both application line to line or line to neutral, Class II , THD of 20% max. Maximum ambienoperating temperature from -40F(-40C) to 130F(55C) degrees. Certified in compliance to cULus requirement. Dry and damplocation. Assembled on a unitized removable tray with Tyco quick disconnect plug resisting to 221F(105C) degrees.
The current supplying the LEDs will be reduced by the driver if the internal driver temperature exceeds 185F(85C), as aprotection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and currenoverload. Automatic recovery after correction.
Surge Protector: Surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordancewith U.S. DOE (Department of Energy) MSSLC (Municipal Solid-State Street Lighting Consortium) model specification forLED roadway luminaires electrical immunity requirements for High Test Level 10kV / 10kA.
Fitter: (SF41), Cast 356 aluminum c/w 3 set screws 3/8-16. Slip-fits on a 4"(102mm) outside diameter x 4" (102mm) longtenon.
Luminaire Options: (CHR), All external aluminum parts of luminaire will be complete with a corrosion resistant coating(SQD), Starter with quick disconnect
8/18/2019 O’FARRELL, BOARD OF PUBLIC WORKS ANNOUNCE CALL FOR ARTIST FOR STREETLIGHT INSTALLATION
57/62
Solano Canyon Project no ROAM (65772)
LCP59337-65772-32(SA)IT.doc04-09-2014 Page 3 / 6
Description of Components:
Pole Shaft: Shall be made from a 4" (102mm) round high tensile carbon steel tubing,
having a 0.125" (3.2mm) wall thickness, welded to the pole base.
Joint Cover: Two-piece round joint cover made from cast 356 aluminum, mechanicallyfastened with stainless steel screws.
Pole Base: Shall be made from a 6 5/8" (168mm) round high tensile carbon steeltubing base having a 0.180" (4.6mm) wall thickness, welded to both the bottom andtop of the anchor plate.
Maintenance Opening: The pole shall have a 4" x 10" (102mm x 254mm) mai