Flat Deck Roof Rack SystemsNew Concept of Safer and more Convenient HD Roof Racks
A great concept of flat deck construction using a unique HD aluminium extrusion provides many benefits overconventional design roof racks.
The aluminium slats that form the floor have a channel that allows almost unlimted mounting options to ensureloads are independently secured rather than via use of ropes , straps or nets etc. These channels are presenton both the upper and lower faces of the roof rack cross bar slats meaning accessories and equipment can besecured either side of the flat deck. Extra height legs/feet are usually available to create more room under therack for accessories such as Ladders, S/Steel Camping Tables and Solar Panel mounts.
With no side rail necessary due to each item being secured independently, the loading height is reduced. Thisoffers improved access to car parks and off-road plus reduces wind drag (better fuel consumption)By securing items seperately as distinct from using boxes or crates, lifting weights can be reduced. Usinglatches and bolts to secure items avoids the risks of poorly secured loads due to poor knots or tie down strapsbecoming loose etc.
A wide range of standard accessories are available together with mounting solutions for almost any vehicle.
www.dolium.com.au
Rack Length (Metres) 1.0 1.3 1.4 1.4 1.4 1.4 1.6 1.6 1.8 1.8 2.0 2.0 2.0 2.0 2.2 2.2 2.2 2.2 2.4 2.8 2.8 E 3.2Basket Code J L A B P Q K U C D E N O I R R-01 F G M H Z V
Basket Dimensions (L xW)
Addi
tiona
lIn
form
atio
nKi
tC
ompo
nent
sor
Not
es
930
x 14
00
1228
x 1
165
1330
x 1
165
1330
x 1
225
1330
x 1
345
1330
x 1
400
1530
x 1
225
1530
x 1
400
1734
x 1
225
1734
x 1
345
1936
x 1
225
1936
x 1
255
1936
x 1
345
1936
x 1
400
2138
x 1
225
2138
x 1
255
2138
x 1
345
2138
x 1
400
2342
x 1
345
2742
x 1
400
2742
x 1
400
3150
x 1
400
Vehicle / ApplicationToyota100 Series TM, Feet Kit A or Ae 1210 1280 1430200 Series TM, Feet Kit A or Ae 1280 143060 & 80 Series Leg Kit C 845 1075 1145 129575-78 Troopie Legs x 190mm+ & CM 895 1295 1345 1445 149570-79 Series Cab Only Legs - 130mm 74576 Wagon (LP Wind Def) Legs x 130mm 1075 1145 1295 1345Prado 2003 On TM, Kit A or Ae 1180 1325 1430Prado pre 2003 Legs Kit C 845 1075 1145 1295Hilux Dual Cab 2005on TM, Kit A or Ae 900NissanNissan GQ & GU Leg Kit C 845 1075 1145 1295 1345Nissan X-Trail pre'07 Custom Mnt Kit 820
Wind-Cheetah Roof Racks - Fitting Guide & RRP ( v11) (Prices are plus Freight)
2
Nissan X-Trail pre'07 Custom Mnt Kit 820MitsubishiPajero LWB (with OE Rails) Grab Feet 1105Pajero LWB (No Gutter) TM, Kit A or Ae 1170 1310 1410Pajero NH-L (Gutter Mnt) Legs 170x4 & 190x2 845 1145 1295LandroverDiscovery 1 & 2 Legs - 270 or 290mm 895 1120 1395Discovery 3 & 4 TM, Custom Mnts 1120 1395Defender 90 & 130 Legs - 225 or 245mm 895Defender 110 Wagon Legs - 225 or 245mm 895 1295 1345 1395Holden/Hyundai/HondaHyundai Terracan Custom Mnt Kit 1240Honda CRV pre07 Custom Mnt Kit 860Jackaroo TM, Kit A or Ae 1260OtherJeep G/Cherokee pre05 TM, Kit A or Ae 1420Jeep G/Cherokee 05+ TM, CM 965Mercedes Benz ML Grab Feet 835VW Touareg Grab Feet 1105Ute Canopy (Most) TM, Kit A or Ae 900Ute - Dual Cab on Roof TM, Kit A or Ae 900Sprinter/VW Van Lo Roof Legs x 120mm
Notes & Codes: RED = Recommended Size Basket; BLUE = OK to Fit; CM = Custom Mounts; TM = Track Mount (sized to suit); Std Basket 50mm HighKit A = 2x45 & 4x55 Feet; Kit Ae = 2x55 & 4x65 Feet; Kit B = 6x120 Legs; Kit C = 4x120 & 2x130 Legs (Legs Range in Height from 120-290mm)
Note: Please ask about other Vehicle Makes/Models or size combinations. We are constantly expanding the range.
2
Rod or Ski Holder
Stainless Steel
425 mm wide opening
Strong and lockable withsoft rubber jaws. Suit Fish-ing Rods or Skis etc.
Supplied in Pairs(padlock not included)
Item No: RMAFRH
Roof Rack AccessoriesAxe Mount Bracket
Bolts to the side rail of aWindCheetah Roof Rack orcan be adapted to otherracks and applications.
Axe head is protected inlockable steel cage and canbe blade up or down.Handle is drilled and se-cured with bolt and wing nutas supplied in the kit.
Item No: RMAAM
Eye Bolts (Pair)
Used to lock into the chan-nel in any WindCheetahrack cross slat.
Easily relocated to secureunusual loads where a spe-cific mounting accessory isnot available.
Sold as Pairs
Item No: RMAEB
Gas Bottle Holders
Two sizes -to suit 220mm Diam. or258mm Diam. bottles
Quick clamp and lockable tosecure Gas Bottle to Wind-Cheetah Rack or other flatsurface.
Item Nos:RMAGB220 suit 220mmRMAGB258 suit 258mm
Jerry Can HolderVertical Mount
Quick clamp and lockable tosecure to Wind-CheetahRoof Rack or other flat sur-face.
Suits most plastic or metaljerry cans
Item No: RMAJCV
Jerry Can Holder
For 2 x 20 Lt JerryCans (steel or plastic)
Base bolts to WindCheetahrack or other Flat Surface.Clamp section easily unclipswhen not needed to ensurelow profile roof rack.
Also avail in Single design
Item No: RMAJCD
Jerry Can Holder
For Single 20 Lt JerryCan (steel or plastic)
Base bolts to WindCheetahor other Flat Surface.Clamp section easily unclipswhen not needed to ensurelow profile roof rack.
Also avail in Double design
Item No: RMAJCS
Hi-Lift Jack Holder
Secures to side rail of Wind-Cheetah or can be adaptedto other racks or installa-tions
Lockable
2 Pieces in each Kit
Item No: RMAJM
Note: Gas Bottles, Axe, Jerry Cans not included and are for illustration purpose only www.dolium.com.au
Ladder—Clip OnAluminium
Height: 1550 mmExtension: 200 mm
Top clips over Rail of Wind-Cheetah Roof Rack and isrubber lined to avoid marks.Base extension swivels out& rest against tyre orbumper etc.
Item No: RMAL-02
Roof Rack AccessoriesWheel Step / Ladder
Quickly attaches to any rearmounted Spare Wheel us-ing ratchet strap supplied inkit.
Allows simple access toRoof Racks.
Steel frame with Alloy nonslip tread plates.
Item No: RMAL-01
Laddersuit
Land RoverDiscovery 3
Aluminium
Item No: RMAL-08
Ladder—2 Pce suitLand Rover Defender
Top section fits alongsiderear door.
Lower section (1 step)mounts to Chassis
Fits all Defenders including2007on model (as pictured)
Item No: RMAL-05
Laddersuit
Land RoverDiscovery 1 & 2
Aluminium. Fits to rear doorallowing easy access to the
roof rack.
Item No: RMAL-06
Ladder— Slides underWindCheetah Rack
This ladder is similar to theClip-on (RMAL-02) except isprovided with slides to fitunder any WindCheetahbasket over 2.2 met’s long.
Not suitable for basketsshorter than 2.2 met.
Item No: RMAL-07
Driving Light or AerialMount
Allows easy mounting tofront or rear of WindChee-tah basket for Driving Lightsor radio Aerial.
No drilling required, can belocated anywhere acrossthe width of the basket.
Item No: RMASBStd colour is Black
www.dolium.com.au
Toyota 76 WagonLadder (Aluminium)
Fits to small door. Hangsover top lip and bolts behind
the number plate lightbracket.
(No drilling required)
Item No: RMAL-09
Roof Rack AccessoriesRoof Tent Mount Kits
Set of 4 stainless steelspacer brackets to mountmost Roof Tents to a Wind-Cheetah Std basket.
2 heights available 33 mm (ZShape) or 57mm (U Shape)Bolts included
33mm No: RMARTM157mm No: RMARTM2
Shovel Mount Bracket
Bolts to side rail of Wind-Cheetah Basket.
2 Piece to securely mountshovel with a D handle
Metal and Lockable
Item No: RMASM
Camping TablesFold to just 28mm
Stainless Steel top and alu-minium frame. Strong easyto clean camping table thatslides.
Folds flat (28mm high) andcan slide under Rack basketfor storage.
2 Sizes Available750x1150mm No: RMAT1550x1150mm No: RMAT7
Slides Kit
Pair of Z shape slide rails tosecure Camping Table orSolar Panels etc under aRackmaster basket
Adjustable width when usedin Front or Rear of basket.
For side mount also requireadaptor kit to give correctspacing (RMAT2)
Item No: RMAT4
Side Mount SlidesAdaptor Kit
Set of adaptors to allow theSlides Kit (RMAT4) or otheraccessories to be bolted inbetween cross slats. Rivetin place for a mid mountingpoint.
Stainless Steel (set of 4)
Item No: RMAT2
Wheel Mount Bracket
Bolts to floor of Wind-Cheetah basket to securespare wheel.
HD, adjustable and Lock-able. (padlock not included)
Also available as Low Pro-file version.
Item No: RMAWMor: RMAWMF (low mount)
Rubber MountUniversal Applications
Use to secure Shovelhandles and other round
attachments to RoofRacks and Ute Trays etc.3 Sizes Available, each has
adjustment of 10-20mm
20mm No: CSQF2040mm No: CSQF4080mm No: CSQF80
www.dolium.com.au
Roof TentQuick Fit Kit
Allows quick and easy fittingand removal of roof tent.
Designed for FeatherliteRoof Tent on WindCheetahroof rack.
May be adapted to otherapplications
Item No: RMARTRM
Storage Box - Gomo
Width: 320 mmDepth: 440 mmHeight: 210 mm
HD Plastic Box.
Ideal for 4WD storageapplications and in rollerdrawer systems.
Item No: RDBOX
Roof Rack AccessoriesTransit Bags
HD Canvas Storage Bag forRoof Rack mounting. Idealfor use with Gomo or Wolf-pakk boxes.
500mm wide x 300mm high
Handles each end allow bagto be loaded on ground andlifted onto rack.
Item Nos:RMATB10 (1050mm)RMATB12 (1200mm)
Storage Box - Wolf Pack
Width: 400 mmDepth: 510 mmHeight: 235 mm
HD Plastic Box.Stackable.
Ideal for 4WD storageapplications, on roof racksor inside the Transit Bags
Item No: RDBOXWP
Cargo Net for RoofRacks
900mm x 1100mm
With 14 PVC Tie DownBuckles, adjustable to se-cure load firmly
Non stretch HD webbing
Item No: OLCN
Rope Net for RoofRacks, Utes or Trucks
3m x 5m (Can be cut downto suit application)
Ideal for couriers or otherapplications with variableloads.
200mm squares, 7mm rope,160kg rating per rope
Item No: OLNET
Wheel Tie Down
Ratchet strap with 3 legsand HD 25mm ratchet.
Can mount around mostbrands of roof rack rails orto Eye Bolts when used in aWind-Cheetah rack.
Item No: OLWTD
Removable Lid – Locks with4 Sliding Catches
Removable Lid locks with 4Flip Over Catches
www.dolium.com.au
Kayak Holder
Set of 4 padded wedgeshaped mounts that can bequickly adjusted in width tosuit any Kayak.
Also suitable for some otherwater craft and applications.
Set of 4, Includes Bolts
Item No: RMAKH
Rubber Tie Down Strap
Use on Roof Rack or anyother Tie-Down application
Adjustable 64 - 240mmSWL of one Strap = 23 Kg
3 Mounting holes to securewith screws or bolts, includ-ing to WindCheetah rails
Item No: CSQFS200
Tracks (Pr)Aluminium HD
Available in custom lengthkits (Pairs) to suit mostpopular 4WD’s. Some stocklengths also available.Includes rubber seal.
Custom fitments includebolts to secure to roof cap-tive nuts or Riv-nuts asneeded
Item No: RMT ??(Sold as a Pair)
Roof Rack—Mounting SystemsGutter Mount Leg
Uses hi-tensile aluminium
Stainless Steel clip to secureunder Gutter. SS grubscrew locks the SS adjusterbolt at correct tightness
Heights available (mm):
120; 130; 155; 170; 180;190; 205; 225; 270 & 290
Item No: RMXL???(Sold per each leg)
Foot suit Tracks
All Stainless SteelHeight adjustable to 15mm2 bolts secure under Rack2 bolts and slide nuts intoTrackHeights available (mm): 45;55; 65; 75 and custom tosuit special applications.
Item No: RMXF ??(Sold per each foot)
Ute Mount LegUses hi-tensile aluminium
Extended Leg designed tomount either WindCheetahBasket or Cross Bars acrossa Ute Well Body
Ideal for mounting a RoofTent over ute body so tent isno higher than cab roof
Height: 270 mm
Item No: RMXLU270
Demountable RailsStainless Steel sitting in athick rubber cushion tospread the load over the roofskin.
Secures to the hidden gutterby long clips.
Only available for a few fit-ments (Dual Cab Utes)
Item No: RMXDM ??(Sold as a Pair and available to
Special order only)
HD Alloy Track
Supplied in vehicle specificpairs including rubber sealand fasteners (where appli-cable).
Also available in UniversalKit to suit unlisted fitments
Item No: RMT??
Adaptor ChannelsAdaptors channels to allow aWind-Cheetah roof rack bas-ket or Cross Bars to be usedwith Rhino Rack Legs orCXB Mounts
Includes BoltsLength: 295 mmWidth: 40mmHeight 17mm
Item No: RMXLRL(Sold as a Pair)
Grab Foot (S’Steel)Designed to fit to OE RoofRails.
Provides a strong and “lowprofile” mounting to factoryfitted roof rails, thus reducingthe overall height of the rack
Adjustable to suit most fac-tory fitted rails.
Item No: RMXFG(Sold per each Foot)
www.dolium.com.au
Wind Cheetah Roof Rack
Land Rover Discovery 3 & 4Available in 1.6 m and 2.2 m lengths. Flat Deck de-sign lowers wind drag and is ideal for Roof Tents.
No holes to be drilled, fits to existing captive nuts in roof usingeither the genuine Land Rover tracks or our HD WindCheetahtracks (specify tracks to be used when ordering)
The aluminium slats that form the floor have a channel thatallows almost unlimted mounting options to ensure loads areindependently secured rather than via use of ropes or nets etc.
A wide range of Accessories is available including, Jerry Cancarriers, Spare Wheel Mount, Rack Bags, Shovel & Axe Hold-ers, Gas Bottle holders, Poly Water Tanks, Roof Tents, SideAwnings, etc.
www.dolium.com.au
Toyota Prado ‘03 on
Flat Deck Roof Rack SystemsNew Concept of Safer, more Convenient HD Roof Rack
Available in 1.8 m, 2.0 m and 2.2 m lengths
Low Sides for less Wind Drag and Better Fuel Economy Easier Access into Carports and Parking Lots Powder Coat Aluminium for Maintenance Free finish
The aluminium slats that form the floor have a channel that allows almost unlimted mounting options to ensure loadsare independently secured rather than with the use of ropes, straps or nets etc.
A wide range of Accessories are available including:-Jerry Can carriers, Spare Wheel Mount, Gas Bottle Holders, Water Tanks, Rack Bags, Shovel & Axe Holders, RoofTent Mounts, Spotlight or Aerial Mounts, etc.
www.dolium.com.au