Download pdf - N / K Tower - Mer · PDF fileDesign Standards: TIA/EIA 222-G, AISC manual, CP3, BS8100, ... All steel elements are hot-dip galvanized (ASTM A123) N / K Tower Three-Legged Towers with

N / K TowerThree-Legged Towers withTubular Legs and Angular Braces

Telecom Division

• Available in heights of 30 to 120m

• Designed for heavy loads

• Designed for MW backbone sites or communication hubs

• Designed to fit a specific site layout and enables last-minute modifications

• Available with a large variety of accessories that can be easily mounted at any stage

• Provides the best stiffness/weight tower structure

Telecom Division

5 Hatzoref St. Holon 58856, Israelwww.mer-group.com [email protected]

Technical Details

Accessories:• Working and rest platforms• Antenna mounts• Anti-climb guard & other safety devices• Paint kit (ICAO standards)• Obstruction lighting system (ICAO standards)• Lightning protection kit• Horizontal cable gantries

Optimal Height:30 to 120m

Design Standards:TIA/EIA 222-G, AISC manual, CP3, BS8100, EUROCODE 3 PART 3-1

Materials:• Tubular legs ST 52-3• Angular braces and plates ST 37-2

Connections:Bolts (ISO 8.8, SAE Grade 5, or ASTM A-325) + flat washers, nuts and spring washers(5% hardware overage)

GalvanizingAll steel elements are hot-dipgalvanized (ASTM A123)

N / K TowerThree-Legged Towers withTubular Legs and Angular Braces

Anchoring:Anchor rods (ASTM F1554) used withleveling nuts or cast-in stubs and a positioning template

Ladder Construction:• Caged or open ladder with safety climbing line or rail installed inside the tower • Vertical cable hangers

Shipment:Standard 40' ISO container

Documentation:• Detailed packing list• Installation & maintenance• Foundation design guidelines