Euro-Tech CorporationMenomonee Falls, WI [email protected]: 262.781.6777 FAX: 262.781.2822
Multiple VSM GaugeMeasures Seat & Guide Geometry
| screen shots
HOW IT WORKS: The mandrel rests on the valve seat and is guided below the valve guide by a separate clamping piece.The guide of the mandrel is equipped with three inductive transducers. In this position the mandrel rotates more than 360° and verifies the features: seat roundness, run out, guide diameter and guide cylinder form.FEATURES:• Seat Roundness• Run Out Valve Guide to Seat• Valve Guide Diameter• Valve Guide Cylinder Form
Three transducers in the guide of the mandrel. features:• diameter• center point• center axis The clamping piece is fastened to the
OD of the guide.Fixing is achieved by a lever with spring (no tools).
Euro-Tech CorporationMenomonee Falls, WI [email protected]: 262.781.6777 FAX: 262.781.2822
Multiple VSM Gaugescreen shots
Recommended
