1
List of products manufactured by Naftan OJSC
Naftan produces refined products used in various economy sectors, as well as for export sales.
These are motor gasolines, diesel fuels, jet fuels, lubricating oils, petroleum bitumens, fuel oils,
individual aromatic hydrocarbons and consumer products (packaged lubricating oils and solvents).
Description, characteristics and scope of use of Naftan OJSC products are given below.
AROMATIC HYDROCARBONS — individual hydrocarbons recovered from the product of gaso-
line catalytic reforming. The enterprise produces petroleum benzene, toluene, paraxylene, orthoxy-
lene, and high aromatics mix.
Produced goods.
Product name, grade, type,
sort
Technical regulatory doc-
uments
Code acc. to
Foreign
Trade Goods
Classification
of the
Customs
Union
National
Product
Classification
Code of the
Republic of
Belarus
Certificate of Compliance
(RB/RF),
Certificate of State
Registration of
the Customs Union
Petroleum benzene, extra refined GOST 9572-93 2902200000 24.14.73.200
Certificate of Compliance:
BY/112 03.028 01324
valid till 21.06.2019
Petroleum benzene, refined GOST 9572-93 2902200000 24.12.73.200
Certificate of Compliance:
BY/112 03.028 01324
valid till 21.06.2019
Petroleum orthoxylene TY BY 300042199.015-2010
valid till 17.11.2015 2902410000 24.14.12.430
Certificate of Compliance:
BY/112 03.03. 028 01988
valid till 12.12.2015
Petroleum paraxylene, extra
refined TY 38.101255-87 rev. 2902430000 24.14.12.400
Petroleum paraxylene, premium
grade TY 38.101255-87 rev. 2902430000 24.14.12.400
С10 aromatic hydrocarbons mix TY BY 300220696.030-2005
rev. 2707509000 24.14.73.400
Petroleum toluene, premium
grade GOST 14710-78 rev. 2902300000 24.14.73.300
Certificate of Compliance:
BY/112 03.03. 028 01329
valid till 21.06.2019
Petroleum toluene, first grade GOST 14710-78 rev. 2902300000 24.14.73.300
Certificate of Compliance:
BY/112 03.03. 028 01329
valid till 21.06.2019
2
Scope of use and quality indicators of individual aromatic hydrocarbons.
Petroleum benzene: feedstock for chemical synthesis — ethylbenzene, isopropylbenzene, cyclohex-
ane, nitrobenzene, alkylbenzene. Benzene is also a component in special solvents.
Product name,
grade, type,
sort
Density at
20°С, g/cm3
Freezing
point, °С
Benzene
content, wt %.
n-heptane
content, wt %
Methyl-
cyclohexane + toluene content,
wt %
Methyl-
cyclopentane content,
wt %.
Sulfuric acid
colour
Sulfur
content, wt %
Reaction
of aqueous extract
Petroleum ben-
zene, extra
refined
range
0.8780 -
0.8800
min.
5.40
min.
99.900
max.
0.010
max.
0.050
max.
0.020
max.
0.10
max.
0.00005
neutral
Petroleum ben-
zene, оrefined
range
0.8780 -
0.8800
min.
5.40
min.
99.800
max.
0.060
max.
0.090
max.
0.040
max.
0.030
max.
0.10
neutral
Petroleum toluene: component for various solvents and diluents used in paint and varnishes industry.
High-octane additive to motor gasoline. Feedstock for organic synthesis — nitrotoluenes, benzene
carbonic acid, benzyl chloride, aromatic isocyanates, etc.
Product name, grade,
type, sort
Density at 20°С,
g/cm3
98% distillated
within the
range, °С
Toluene content,
wt %
Impurities content,
wt %
Non-aromatic hydrocarbons
content,
wt %
Benzene content, wt %
Petroleum toluene,
premium grade
range
0.8650…0.8670
max.
0.70
min.
99.750
max.
0.250
max.0.100 max. 0.100
Petroleum toluene, first grade
range
0.8640…0.8670
max.
0.80
min.
99.600
max.
0.400
max. 0.200 max. 0.150
Product name, grade,
type, sort
C8 aromatic hy-
drocarbons con-
tent, wt %
Sulfuric acid
colour
Copper strip
corrosion test
Reaction of
aqueous
extract
Volatility Sulfur content,
wt %
Petroleum toluene, premi-
um grade
max. 0.050 max.
0.15
passed neutral passed max. 0.00015
Petroleum toluene, first
grade
max. 0.050 max.
0.20
passed neutral passed
Petroleum paraxylene: component of solvents and diluents; feedstock for synthesis of phenol-
formaldehyde resins, polyethylene terephthalate and polyester fibers.
Product name, grade,
type, sort
Density at 20°С,
kg/m3
5-95 % distilled within the
range, °С
Base material
content,
mole %
Freezing point, °С
Bromine num-ber,
g Вr/100 mL
Petroleum paraxylene,
extra refined
range
860.0…862.0
max. 0.4 min. 99.50 min. 13,00 max. 0.120
Petroleum paraxylene,
premium grade
range
860.0…862.0
max. 0.6 min. 99.00 min. 12.90 max. 0.200
3
Petroleum orthoxylene: component in solvents and diluents used in paint and varnishes industry.
High-octane additive to automotive gasoline. Feedstock for phthalic acid and phthalic anhydride.
Product name,
grade, type, sort
Base material
content, mole
%
Colour
(Pt-Co
scale)
Orthoxylene
content,
wt %
Total С8
content,
wt %
Impurities
content, wt
%
i-propyl-
benzene
content, wt %
Density at
20 °С,
kg/m3
Bromine
number, г
Вr/100 mL
Closed cup
flash point,
°С (Tag)
Petroleum orthoxy-lene
min. 99.20
max. 10
min. 98.5000
min. 99.00
max. 1.000
max. 0.10
min. 860.0
max. 0.180
min. 24
С10 aromatic hydrocarbons mix: antiseptic impregnating compounds, diluents for heavy fuels, feed
components for thermal decomposition processes in oil refining.
Product name, grade,
type, sort
Density at
20 °С,
kg/m3
Water con-
tent,
wt %
Pour point,
°С
Kinematic
viscosity at
20 °С,
mm2/s
Closed
cup flash
point, °С
(M/P)
Initial boiling
point, °С
Water
content
Sulfur
content,
wt %
С10 aromatic hydrocar-
bons mix
max. 1000,0
max. 0,10
max. -20
max. 2,000
min. 61
range 160…173
none max. 0.001
JET FUEL — petroleum fuel for civil and military aviation. Produced from kerosene cuts of atmos-
pheric distillation with additives improving required performance characteristics. A large-scale prod-
uct is jet fuel, grade RT. Under individual contracts Naftan produces jet fuel, grade Jet A-1, which
conforms to DEF STAN 91-91.
RT Grade Jet Fuel quality indicators.
№ Property Standard
1 Density at 20 °С, kg/m3, min. 775
2 Distillation:
a) IBP, °С, range 135…155
b) 10% distillated at temperature, °С, max. 175
c) 50% distillated at temperature, °С, max. 225
d) 90% distillated at temperature, °С, max. 270
e) 98% distillated at temperature, °С, max. 280
f) distillation residue, %, max. 1.5
g) distillation loss, %, max. 1.5
3 Kinematic viscosity, mm2/s:
at 20 °С, min.
1.25
at minus 20 °С, max. 8
at minus 40 °С, max. 16
4 Lower heating value, kJ/kg, min. 43120
5 Smoke point, mm, min. 25
4
№ Property Standard
6 Acidity, mg KOH / 100 cm3 of fuel, max. 0.7
7 Iodine value, g iodine / 100 g of fuel, max. 0.5
8 Closed cup flash point, °С, min. 28
9 Pour point, °С, max. -55
10 Thermal oxidation stability in static conditions at 150°С, max.:
а) sediment concentration, mg / 100 cm3 of fuel 6
b) soluble gums concentration, mg / 100 cm3 of fuel 30
c) insoluble gums concentration, mg / 100 cm3 of fuel 3
11 Aromatic hydrocarbons, vol. %, max. 20
12 Actual gums concentration, mg / 100 см3
of fuel, max. 4
13 Total sulfur, wt, %, max. 0,10
14 Mercaptan sulfur, wt, %, max. 0,001
15 Hydrogen sulfide none
16 Copper strip corrosion test at 100 °С during 3 hours passed
17 Ash content, %, max. 0.003
18 Water soluble acids and alkalis none
19 Sediments and water none
20 Naphthalene hydrocarbons, wt %, max. 1.5
21 Luminometric value, min. 50
22 Interaction with water, points, max.
a) interface state 1
b) state of separate phases 1
23 Specific conductivity without antistatic additive
at 20°С, pSm/m, max. 10
24 Thermal oxidation stability at temperature min. 275 °С:
a) pressure drop at filter, mm Hg, max. 25
b) color of deposits on tube, color scale points, баллы (if there are no deposits
of unusual color), max. 3
5
Jet A-1 Fuel Quality Indicators.
№ Property Standard
1 Appearance:
a) visual
Transparent, light, without
non-dissolved water and
suspended particles at
ambient temperature
b) color, Saybolt scale points not rated
2 c) mechanical impurities, mg/dm3, max. 1.00
3 Acidity, mg KOH/g, max. 0.015
4 Aromatic hydrocarbons, vol. %, max. 25.0
5 Total Sulfur, wt %, max. 0.30
6 Mercaptan sulfur, wt, %, max. 0.003
7 Distillation, °С:
10 % distillated at temperature, °С, max. 205
50 % distillated at temperature, °С not rated
90 % distillated at temperature, °С not rated
final boiling point, °С, max. 300
distillation residue, %, max. 1.5
distillation loss, %, max. 1.5
8 Flash point,°С, min. 38
9 Density at 15°С, kg/m3 775.0…840.0
10 Freezing point, °С, max. -47.0
11 Kinematic viscosity at minus 20 °С, mm2/s, max. 8.000
12 Lower heating value, MJ/kg, min. 42.80
13 Smoke point, mm, min. 19
14 Naphthalene hydrocarbons, wt %, max. 3.00
15 Copper strip corrosion test during 2 h at temperature 100 °С, class, max. passed
16
Thermal oxidation stability at temperature min. by JFTOT
during 2.5 h at temperature min. 260 °С:
Pressure drop at filter, mm Hg, max
25.0
Deposits on tube, less than 3
17 Actual gum concentration, mg/100 cm3, max. 7.0
18 Light transmission measurement by micro-separometer, min. 70
19 Specific conductivity, pS/m,
with antistatic additive, max. 50.0…600.0
6
MOTOR GASOLINE — fuel for automotive internal combustion engines. Produced by mixing
light products of different oil refining processes – straight-run distillation, catalytic reforming, hy-
drocracking, visbreaking, and isomerisation. Depending on performance characteristics automotive
gasolines fall into winter and summer grades, and also differ by octane number, which defines fuel
combustion conditions.
Produced goods.
Product name, grade,
type, sort
Technical regulatory
documents
Foreign
Trade Goods
Classification
of the
Customs
Union
National Product
Classification of
the Republic of
Belarus
Certificate of Compliance
(RB/RF),
Certificate of State
Registration of
the Customs Union
Declaration of
compliance to the
technical
regulations of
the Customs Union
Motor gasoline
AI-92-K3 (winter)
TY BY 400091131.006-2009
rev. 2710124100 23.20.11.500
ТС BY/112 11.01
ТР013 002 00011
valid till 31.12.2014
Motor gasoline AI-92-K3 (summer)
TY BY 400091131.006-2009 rev.
2710124100 23.20.11.500
ТС BY/112 11.01
ТР013 002 00011
valid till 31.12.2014
Motor gasoline
AI-92-K5 (winter)
TY BY 400091131.006-2009
rev. 2710124100 23.20.11.500
ТС BY/112 11.01 ТР013 002 00012
valid till 27.12.2017
Motor gasoline
AI-92-K5 (summer)
TY BY 400091131.006-2009
Rev. 2710124100 23.20.11.500
ТС BY/112 11.01 ТР013 002 00012
valid till 27.12.2017
Unleaded gasoline
AI-80-K3 GOST 31077-2002 Rev. 2710124100 23.20.11.500
ТС BY/112 11.01
ТР013 002 00052 valid till 31.12.2014
Unleaded gasoline
AI-80-K4 GOST 31077-2002 Rev. 2710124100 23.20.11.500
ТС BY/112 11.01
ТР013 002 00053 valid till 31.12.2015
Unleaded gasoline AI-80-K5
GOST 31077-2002 Rev. 2710124100 23.20.11.500
ТС BY/112 11.01
ТР013 002 00054
valid till 30.01.2018
Unleaded gasoline AI-95-K5-Euro
STB 1656-2011 Rev. 2710124500 23.20.11
ТС BY/112 11.01
ТР013 002 00051
valid till 30.01.2018
Unleaded gasoline
Normal-80 GOST 31077-2002 Rev. 2710124100 23.20.11.500
Certificate of compliance: BY/112 03.03.028 00064
valid till 29.07.2016
Quality indicators.
Product name, grade, type, sort Motor gasoline
AI-92-K3* (winter)
Motor gasoline
AI-92-K3* (summer)
№ Property Standard
Standard
1 Octane number (RON) min. 92.0 min.92.0
2 Octane number (MON) min. 83.0 min.83.0
3 Density at 15 °С, kg/m3 range 720.0…775.0 range 720.0…775.0
4 10% evaporated at t, °С Max. 75 Max.75
5 50% evaporated at t, °С Max. 120 Max.120
6 90% evaporated at t, °С Max.190 Max.190
7 Final boiling point, °С Max.215 Max.215
8 Distillation test residue, % max.1.5 max.1.5
9 Residue and loss, % max.4.0 max.4.0
10 Reid vapor pressure, kPa range 35.0…100.0 range 35.0…80.0
11 Lead content, mg/dm3 max. 5.0 max. 5.0
7
Product name, grade, type, sort Motor gasoline
AI-92-K3* (winter)
Motor gasoline
AI-92-K3* (summer)
№ Property Standard
Standard
12 Acidity, mg KOH/100 cm3 max.3.00 max.3.00
13 Mercaptan sulfur content, wt % max.0.0010 max.0.0010
14 Oxidation stability, min. min. 600 min. 600
15 Actual gum concentration, mg/100 cm3 max.5.0 max. 5,0
16 Sulfur content, mg/kg max.150.00 max. 150.00
17 Copper strip corrosion test class 1 class 1
18 Water soluble acids and alkalis none none
19 Basic sediments and water none none
20 Color transparent and clear transparent and clear
21 Benzene content, vol. % max. 1.0 max. 1.0
22 Olefin hydrocarbons, vol. % max. 18.0 max. 18.0
23 Aromatic hydrocarbons, vol., % max. 42.0 max. 42.0
24 Oxygen content, wt % max. 2.70 max. 2.70
25 Methanol none none
26 Ethanol, vol. % max. 5.0 max. 5.0
27 Isopropyl alcohol, vol. % max. 10.0 max. 10.0
28 Isobutyl alcohol, vol. % max. 10.0 max. 10.0
29 Tert-butyl alcohol, vol. % max. 7.0 max. 7.0
30 Ethers, vol. % max. 15.0 max. 15.0
31 Oxygenates, vol. % max. 10.0 max. 10.0
32 Iron, mg/dm3 none none
33 Manganese, mg/dm3 none none
34 Monomethylaniline, % none none
35 Density at 20 °С, kg/m3 Max. 790.0 Max. 790.0
Product name, grade, type, sort Motor gasoline
AI-92-K5 (winter)
Бензин автомобильный
AI-92-K5 (summer)
№ Property Standard
Standard
1 Octane number (RON) min. 92.0 min. 92.0
2 Octane number (MON) min. 83.0 min. 83.0
3 Density at 15 °С, kg/m3 range 720.0…775.0 range 720.0…775.0
4 10% evaporated at t, °С Max. 75 Max. 75
5 50% evaporated at t, °С Max. 120 Max. 120
6 90% evaporated at t, °С Max. 190 Max. 190
7 Final boiling point, °С Max. 215 Max. 215
8 Distillation test residue, % max. 1.5 max. 1.5
9 Residue and loss, % max. 4.0 max. 4.0
10 Reid vapor pressure, kPa range 35.0…100.0 range 35.0…80.0
11 Lead content, mg/dm3 max. 5.0 max. 5.0
12 Acidity, mg KOH/100 cm3 max. 3.00 max. 3.00
13 Mercaptan sulfur content, wt % max. 0.0010 max. 0.0010
14 Oxidation stability, min min. 600 min. 600
15 Actual gum concentration, mg/100 cm3 max. 5.0 max. 5.0
8
Product name, grade, type, sort Motor gasoline
AI-92-K5 (winter)
Бензин автомобильный
AI-92-K5 (summer)
№ Property Standard
Standard
16 Sulfur content, mg/kg max. 10.00 max. 10.00
17 Copper strip corrosion test class 1 class 1
18 Water soluble acids and alkalis none none
19 Basic sediments and water none none
20 Color transparent and clear transparent and clear
21 Benzene content, vol. % max.1.0 max.1.0
22 Olefin hydrocarbons, vol. % max. 18.0 max. 18.0
23 Aromatic hydrocarbons, vol., % max. 35.0 max. 35.0
24 Oxygen content, wt % max. 2.70 max. 2.70
25 Methanol none none
26 Ethanol, vol. % max. 5.0 max. 5.0
27 Isopropyl alcohol, vol. % max. 10.0 max. 10.0
28 Isobutyl alcohol, vol. % max. 10.0 max. 10.0
29 Tert-butyl alcohol, vol. % max. 7.0 max. 7.0
30 Ethers, vol. % max. 15.0 max. 15.0
31 Oxygenates, vol. % max. 10.0 max. 10.0
32 Iron, mg/dm3 none none
33 Manganese, mg/dm3 none none
34 Monomethylaniline, % none none
35 Density at 20 °С, kg/m3 Max. 790.0 Max.790.0
Product name, grade, type, sort Unleaded gasoline
AI-80-K3*
Unleaded gasoline
AI-80-K4
Unleaded gasoline
AI-80-K5
№ Property Standard Standard Standard
1 Octane number (MON) min. 76.0 min. 76.0 min. 76.0
2 Octane number (RON) min.80.0 min.80.0 min.80.0
3 Lead content, mg/dm3 max. 5.0 max. 5.0 max. 5.0
4 Manganese content, mg/dm3 none none none
5 Actual gum concentration, mg/100 cm3 max. 5.0 max. 5.0 max. 5.0
6 Breakdown time, min min. 360 min. 360 min. 360
7 Sulfur, mg/kg max. 150.00 max. 50.00 max. 10.00
8 Benzene, vol. % max. 1.0 max. 1.0 max. 1.0
9 Copper strip corrosion test class 1 class 1 class 1
10 Appearance corresponds corresponds corresponds
11 Density at 15°С, kg/m3 range 700.0…750.0 range 700.0…750.0 range 700.0…750.0
12 Oxygen content, wt % max. 2.70 max. 2.70 max. 2.70
13 Aromatic hydrocarbons, vol. % max. 42.0 max. 35.0 max. 35.0
14 Olefin hydrocarbons, vol. % max. 18.0 max. 18.0 max. 18.0
15 Iron, mg/dm3 none none none
16 Monomethylaniline, vol. % none none none
17 Methanol, vol. % max. 1.000 max. 1.000 max. 1.000
18 Ethanol, vol. % max. 5.0 max. 5.0 max. 5.0
19 Isopropyl alcohol, vol. % max. 10.0 max. 10.0 max. 10.0
9
Product name, grade, type, sort Unleaded gasoline
AI-80-K3*
Unleaded gasoline
AI-80-K4
Unleaded gasoline
AI-80-K5
№ Property Standard Standard Standard
20 Tert-butyl alcohol, vol. % max. 7.0 max. 7.0 max. 7.0
21 Isobutyl alcohol, vol. % max. 10.0 max. 10.0 max. 10,0
22 Ethers, vol. % max. 15.0 max. 15.0 max. 15.0
23 Oxygenates, vol. % max. 10.0 max. 10.0 max. 10.0
24 Reid vapor pressure, kPa range 45.0…80.0 range 45.0…80.0 range 45.0…80.0
25 Initial boiling point, °С Min. 35 Min. 35 Min. 35
26 10% evaporated at t, °С Max. 70 Max. 70 Max. 70
27 50% evaporated at t, °С Max. 115 Max. 115 Max. 115
28 90% evaporated at t, °С Max. 185 Max. 185 Max. 185
29 Final boiling point, °С Max. 215 Max. 215 Max. 215
30 Distillation test residue, % max. 2.0 max. 2.0 max. 2.0
31 Residue and loss, % max. 4.0 max. 4.0 max. 4.0
32 Vapor lock index max. 1000 max. 1000 max. 1000
* — according to requirements of the Technical Regulations of the Customs Union ТР ТС 013/2011 sales in
the territory of the Republic of Belarus are permitted till 31 December 2014.
Product name, grade, type, sort
Unleaded gasoline
AI-95-K5-Euro
(class D)
Unleaded gasoline
AI-95-K5-EUro
(class B)
№ Property Standard Standard
1 Octane number (RON) min. 95.0 min. 95.0
2 Octane number (MON) min. 85.0 min. 85.0
3 Lead content, mg/dm3 max. 5.0 max. 5.0
4 Density at 15 °С, kg/m3 range 720.0…775.0 range 720.0…775.0
5 Sulfur content, mg/kg max. 10.00 max. 10,00
6 Oxidation stability, min. min. 360 min. 360
7 Gum content (solvent washed) mg /100 mL max. 5.0 max. 5.0
8 Copper strip corrosion test class 1 class 1
9 Appearance corresponds corresponds
10 Olefin hydrocarbons, vol. % max. 18.0 max. 18.0
11 Aromatic hydrocarbons, vol. % max. 35.0 max. 35.0
12 Oxygen content, wt % max. 2.70 max. 2.70
13 Benzene content, vol. %. max. 1.0 max. 1.0
14 Methanol, vol. % max. 1.0 max. 1.0
15 Ethanol, vol. % max. 5.0 max. 5.0
16 Isopropyl alcohol, vol. % max. 10.0 max. 10.0
17 Isobutyl alcohol, vol. % max. 10.0 max. 10.0
18 Tert-butyl alcohol, vol. % max. 7.0 max. 7.0
19 Ethers, vol. % max. 15.0 max. 15.0
20 Oxygenates, vol. % max. 10.0 max. 10,0
21 Reid vapor pressure, kPa range 60.0…90.0 range 45.0…70.0
22 up to 70 °С distillated, % range 22.0…50.0 range 20.0…48.0
23 up to 100 °С distillated, % range 46.0…71.0 range 46.0…71.0
24 up to 150 °С distillated, % Min. 75.0 Min. 75.0
25 Final boiling point, °С Max. 210 Max. 210
26 Distillation test residue, % max. 2.0 max. 2.0
10
Product name, grade, type, sort
Unleaded gasoline
AI-95-K5-Euro
(class D)
Unleaded gasoline
AI-95-K5-EUro
(class B)
№ Property Standard Standard
27 Iron content, mg/dm3 none none
28 Manganese content, мг/дм3 none none
29 Monomethylaniline content, % none none
PETROLEUM BITUMENS — oil refinery residual products having hard or viscous consistency
and composed of hydrocarbons and heteroatomic (oxygen, sulfur, nitrogen, metal-containing) com-
pounds. According to production method petroleum bitumens are divided into residual, oxidized, and
compound (blended). Residual bitumens are produced by deep vacuum distillation of atmospheric
residue; oxidized – by vacuum residue oxidation with atmospheric oxygen; compound – by blending
the above two kinds in required proportions. By major fields of use bitumens are divided into road,
roofing, construction, and special bitumens.
Produced goods.
Product name, grade, type, sort Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Product
Classification
of the Re-
public of
Belarus
Certificate of Compliance
(RB/RF),
Certificate of State Registra-
tion of the Customs Union
Road bitumen, grade 100/150 TY BY 400091131.009-2011 23.20.32.530
Certificate of compliance:
BY/112 03.03. 028 02574
valid till 29.04.2017
Road bitumen, grade 40/60 TY BY 400091131.009-2011 23.20.32.530
Certificate of compliance:
BY/112 03.03. 028 02574
valid till 29.04.2017
Road bitumen, grade 50/70 TY BY 400091131.009-2011 23.20.32.530
Certificate of compliance:
BY/112 03.03. 028 02574
valid till 29.04.2017
Road bitumen, grade 70/100 TY BY 400091131.009-2011 23.20.32.530
Certificate of compliance:
BY/112 03.03. 028 02574
valid till 29.04.2017
Petroleum bitumen, compounded
TY BY 300220696.032-2005
Rev. 2713200000 23.20.32.500
Petroleum bitumen for roofing,
compounded, grade BNKK-
40/180
TY BY 300220696.018-2003
Rev. 2713200000 23.20.32.550
Petroleum bitumen for roofing,
compounded, grade BNKK-
45/190
TY BY 300220696.018-2003
Rev. 2713200000 23.20.32.550
Petroleum bitumen for construc-
tion BN 70/30 GOST 6617-76 Rev. 2713200000 23.20.32.500
Certificate of compliance:
ВY/112 03.03.028 00092
valid till 26.09.2016
Petroleum bitumen for construc-
tion BN 90/10 GOST 6617-76 Rev. 2713200000 23.20.32.500
Certificate of compliance:
ВY/112 03.03.028 00092
valid till 26.09.2016
Quality indicators.
a) petroleum bitumens, road grades
11
Product name, grade,
type, sort
Ring-and-ball
softening
point,
°С
Penetration at
25°С,
0.1 mm
Fraass breaking
point, °С
Open cup
flash point,
°С
Mass change
after
heating,
%
Penetration
Index
Road bitumen,
grade 100/150
range
39.0...47.0
range
100...150
Max. -12,0 Min. 230 Max. 0.80 range
-1.5...0,7
Road bitumen,
grade 40/60
range
45.0...56.0
range
40...60
Max. -7,0 Min. 230 Max. 0.50 range
-1.5...0.7
Road bitumen,
grade 50/70
range
46.0...54.0
range 50...70 Max. -8,0 Min. 230 Max. 0.50 range
-1.5...0.7
Road bitumen,
grade 70/100
range
43.0...51.0
range
70...100
Max. -10,0 Min. 230 Max. 0.80 range
-1.5...0.7
Product name, grade,
type, sort
Retained pene-
tration,
%
Increase in
softening
point,
°С
Solubility in
toluene or chloro-
form
Dynamic vis-
cosity
at 60 °С,
Pa∙s
Kinematic viscosity
at 135 °С,
mm2/s
Road bitumen,
grade 100/150
min. 43 max. 10.0 min.99.00 min.55 min.175.0
Road bitumen,
grade 40/60
min.50 max. 9.0 min.99.00 min.175 min.325.0
Road bitumen,
grade 50/70
min.50 max. 9.0 min.99.00 min.145 min.295.0
Road bitumen,
grade 70/100
min.46 max. 9.0 min.99.00 min.90 min.230.0
Product name, grade,
type, sort
Softening
point, °С
Penetration Ductility Breaking
point, °С
Open cup
flash point, °С
Penetra-
tion Index
Increase in
softening point,
°С
at 25°С, 0.1 mm
at 0 °С, 0.1 mm
at 25 °С, cm
at 0 °С, cm
Petroleum bitumen,
compounded
Min.
43.0
range
90...130
Min.
28
Min.
90.0
Min.
8.0
Max.
-17.0
Min.
250
range
-1.0...1.0
Max.
5.0
b) Petroleum bitumens, roofing and construction grades
Product name,
grade, type, sort
Softening
point,
°С
Penetration
at 25°С,
0.1 mm
Ductility at
25 °С,
cm
Open cup
flash
point, °С
Mass
change
after heating,
%
Penetration
Index
Retained
penetration,
%
Solubility in
toluene or
chloroform, %
Petroleum bitumen for
roofing, compounded,
grade BNKK-40/180
range 37.0...44.0
range 160...210
min. 290 max. 0.80
min. 60 min. 99.50
Petroleum bitumen for
roofing, compounded,
grade BNKK-45/190
range
40.0...50.0
range
160...220
min. 290 max. 0.80 range
1.0...2.5
min. 61 min. 99.50
Petroleum bitumen for
construction BN 70/30
range
70.0...80.0
range
21...40
min. 3.0 min. 240 max. 0.50
min. 99.50
Petroleum bitumen for
construction BN 90/10
range
90.0...105.0
range 5...20
min. 1.0
min. 240
max. 0.50
min. 99.50
12
DIESEL FUEL — liquid petroleum product used as fuel in stationary and mobile diesel engines of
various purpose: power generators, water, railway, road transport (passenger cars and automotive
trucks). Produced by blending hydrotreated straight-run kerosene and gasoil cuts with additives. By
conditions of use summer, winter and arctic diesel fuel grades are distinguished. Besides, depending
on sulfur content there are several environmental classes of diesel fuel.
Produced goods.
Product name, grade,
type, sort
Technical
regulatory
documents
Foreign
Trade Goods
Classification
of
the Customs
Union
National
Product
Classification
of the Repub-
lic of Belarus
Certificate of
Compliance
(RB/RF),
Certificate of State
Registration of the
Customs Union
Declaration of compliance to
the Technical Regulations of
the Customs Union
Diesel fuel
DT-Z-K4, grade F STB 1658-2012 2710194220 23.20.15.520
TC BY/112 11.01 ТР013 002
01677 valid till 06.11.2019
Diesel fuel
DT-Z-K5, class 1 STB 1658-2012 2710194220 23.20.15.520
ТС BY/112 11.01 ТР013 002
00008 valid till 27.12.2017
Diesel fuel
DT-Z-K5, class 2 STB 1658-2012 2710194220 23.20.15.520
ТС BY/112 11.01 ТР013 002
00009 valid till 27.12.2017
Diesel fuel
DT-Z-K5, grade F STB 1658-2012 2710194220 23.20.15.520
ТС BY/112 11.01 ТР013 002
01678 valid till 06.11.2019
Diesel fuel
DT-L-K4, grade С STB 1658-2012 2710194210 23.20.15.520
ТС BY/112 11.01 ТР013 002
01676 valid till 06.11.2019
Diesel fuel
DT-L-K5, grade С STB 1658-2012 2710194210 23.20.15.520
ТС BY/112 11.01 ТР013 002
00007 valid till 27.12.2017
Quality indicators.
Depending on sulfur content there are two environmental classes: K4 and K5.
Grades and classes as per STB 1658-2012 determine the applicability of the fuel in certain seasonal
and climatic conditions.
a) winter grades of diesel fuel for temperate climate conditions
Product name, grade, type, sort Diesel fuel
DT-Z-K4, grade F
Diesel fuel
DT-Z-K5, grade F
№ Property Standard Standard
1 Cetane number min. 51 min. 51
2 Cetane Index min. 46,0 min. 46,0
3 Density at 15 °С, kg/m3 range 820.0…845.0 range 820.0…845.0
4 Polycyclic aromatic hydrocarbons, % max. 8.00 max. 8.00
5 Sulfur, mg/kg max. 50.0 max. 10.0
6 Closed cup flash point, °С (М/П) min.55 min.55
13
Product name, grade, type, sort Diesel fuel
DT-Z-K4, grade F
Diesel fuel
DT-Z-K5, grade F
№ Property Standard Standard
7 Con-Carbon Residue on 10 % residue, % max. 0.300 max. 0.300
8 Ash content, % max. 0.010 max. 0.010
9 Water content, mg/kg max. 200,0 max. 200.0
10 Total contamination, mg/kg max. 24.0 max. 24.0
11 Copper strip corrosion test class 1 class 1
12 Oxidation stability, g/m3 max. 25.0 max. 25.0
13 Lubricity, μm max. 460 max. 460
14 Kinematic viscosity at 40 °С, mm2/s range 2.00…4.50 range 2.00…4.50
15 % recovered at 250 °С max. 65.0 max. 65.0
16 % recovered at 350 °С min. 85.0 min. 85.0
17 95 % recovered at t, °С max. 360 max. 360
18 Cold filter plugging point, °С max. -20 max. -20
b) winter grades of diesel fuel for cold climate
Product name, grade, type, sort Diesel fuel
DT-Z-K5, class 1
Diesel fuel
DT-Z-K5, class 2
№ Property Standard Standard
1 Cetane number min. 49 min.48
2 Cetane Index min.46,0 min.46.0
3 Density at 15 °С, kg/m3 range 800.0…845.0 range 800.0…840.0
4 Polycyclic aromatic hydrocarbons, % max. 8.00 max.8.00
5 Sulfur, mg/kg max.10.0 max.10.0
6 Closed cup flash point, °С (M/P) min.55 min.55
7 Con-Carbon residue on 10 % residue, % max.0.300 max.0.300
8 Ash content, % max.0.010 max.0.010
9 Water content, mg/kg max.200.0 max.200.0
10 Mechanical impurities, mg/kg max.24.0 max.24.0
11 Copper strip corrosion test class 1 class 1
12 Oxidation stability, g/m3 max. 25.0 max. 25.0
13 Lubricity, μm max.460 max.460
14 Kinematic viscosity at 40 °С, mm2/s range 1.50…4.00 range 1.50…4.00
15 % recovered at 180 °С max.10 max.10
16 % recovered at 340 °С min. 95.0 min. 95.0
17 95 % recovered at t, °С max. 360 max.360
18 Cold filter plugging point, °С max. -26 max.-32
19 Cloud point, °С max. -16 max.-22
c) summer grades of diesel fuel
Product name, grade, type, sort Diesel fuel
DT-L-K4, grade С
Diesel fuel
DT-L-K5, grade С
№ Property Standard Standard
1 Cetane number min. 49 min. 48
2 Cetane Index min. 46.0 min. 46.0
3 Density at 15 °С, kg/m3 range 800.0…845.0 range 800.0…840.0
4 Polycyclic aromatic hydrocarbons, % max. 8.00 max.8.00
5 Sulfur, mg/kg max. 10,0 max. 10.0
6 Closed cup flash point, °С (M/P) min. 55 min. 55
14
Product name, grade, type, sort Diesel fuel
DT-L-K4, grade С
Diesel fuel
DT-L-K5, grade С
№ Property Standard Standard
7 Con-Carbon residue on 10 % residue, % max. 0.300 max. 0.300
8 Ash content, % max. 0.010 max. 0.010
9 Water content, mg/kg max.200.0 max.200.0
10 Mechanical impurities, mg/kg max.24.0 max. 24.0
11 Copper strip corrosion test class 1 class 1
12 Oxidation stability, g/m3 max.25.0 max.25.0
13 Lubricity, μm max.460 max.460
14 Kinematic viscosity at 40 °С, mm2/s range 1.50…4.00 range 1.50…4.00
15 % recovered at 180 °С max.10 max.10
16 % recovered at 340 °С min. 95.0 min. 95.0
17 95 % recovered at t, °С max. 360 max. 360
18 Cold filter plugging point, °С max. -26 max. -32
19 Cloud point, °С max. -16 max. -22
OILS — a broad class of products having mineral, synthetic and semisynthetic composition. Their
common property is hydrophoby — insolubility in water. Usage of this property in different areas
determines a large variety and diversity of oils. Main types of oils are lubricating (for friction reduc-
tion between moving parts), preserving (for prevention of air and corrosive aqueous solutions impact
on surfaces), insulating (oil is used as dielectric), heat transfer agents, coolant-lubricants, and hydrau-
lic oils. Oils can also be applied in chemical synthesis and as a fuel.
Goods produced.
a) Industrial oils — distillate petroleum oils of low and medium viscosity (5-50 mm²/s at 50 °C) used
as lubricants mainly on friction joints of machines, fans, pumps, textile machines, and also as a basis
for hydraulic fluids, plastic and process lubricants.
Product name,
grade, type, sort
Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Product
Classification
of the Re-
public of
Belarus
Certificate of Compli-
ance (RB/RF),
Certificate of State
Registration of
the Customs Union
Declaration of compliance to
the Technical Regulations of
the Customs Union
Industrial oil
I-20A GOST 20799-88 Rev. 2710199800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.028 00063
valid till 29.07.2016
ТС BY/112 11.01 ТР030 028 00027
valid till 25.03.2017
Industrial oil
I-З0А GOST 20799-88 Rev. 2710199800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.028 00063
valid till 29.07.2016
ТС BY/112 11.01 ТР030 028 00027
valid till 25.03.2017
Industrial oil
I-40А GOST 20799-88 Rev. 2710199800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.028 00063
valid till 29.07.2016
ТС BY/112 11.01 ТР030 028 00027
valid till 25.03.2017
Industrial oil
I-50А GOST 20799-88 Rev. 2710199800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.028 00063
valid till 29.07.2016
ТС BY/112 11.01 ТР030 028 00027
valid till 25.03.2017
Industrial oil
IGP-18
TY 0253-053-00151911-
2008
Rev.
2710198800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.029 01646
valid till 30.03.2015
ТС BY/112 11.01 ТР030 028 00036
valid till 10.04.2017
15
Product name,
grade, type, sort
Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Product
Classification
of the Re-
public of
Belarus
Certificate of Compli-
ance (RB/RF),
Certificate of State
Registration of
the Customs Union
Declaration of compliance to
the Technical Regulations of
the Customs Union
Industrial oil
IGP-30
TY 0253-053-00151911-
2008
Rev.
2710198800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.029 01646
valid till 30.03.2015
ТС BY/112 11.01 ТР030 028 00036
valid till 10.04.2017
Industrial oil
IGP-38
TY 0253-053-00151911-
2008
Rev.
2710198800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.029 01646
valid till 30.03.2015
ТС BY/112 11.01 ТР030 028 00036
valid till 10.04.2017
Industrial oil
IGP-49
TY 0253-053-00151911-
2008
Rev.
2710198800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.029 01646
valid till 30.03.2015
ТС BY/112 11.01 ТР030 028 00036
valid till 10.04.2017
Industrial oil
IGP-72
TY 0253-053-00151911-
2008
Rev.
2710198800 23.20.18.592
Certificate of compliance:
ВY/112 03.03.029 01646
valid till 30.03.2015
ТС BY/112 11.01 ТР030 028 00036
valid till 10.04.2017
Quality indicators.
Product name, grade, type, sort Industrial oil I-20А Industrial oil I-З0А Industrial oil I-40А Industrial oil I-50А
Kinematic viscosity at 40 °С, mm2/s range
29.00…35.00
range
41.00…51.00
range
61.00…75.00
range
90.00…110.00
Acid number, mg КОН/1g max. 0.030 max. 0.050 max. 0.050 max. 0.050
Ash, % max. 0.005 max. 0.005 max. 0.005 max. 0.005
Sulfur, % max. 1.00 max. 1.00 max. 1.10 max. 1.10
Mechanical impurities none none none none
Water content traces traces traces traces
Density at 20 °С, kg/m3 Max. 890.0 Max. 890.0 Max. 900.0 Max. 910.0
Pour point, °С Max. -15 Max. -15 Max. -15 Max. -15
Color by CNT colorimeter Max. 2.0 Max. 2.5 Max. 3.0 Max. 4.5
Open cup flash point, °С Min. 200 Min. 210 Min. 220 Min. 225
Increase in acid number Max. 0.300 Max. 0.400 Max. 0.400 Max. 0.400
Increase in resins, % Max. 2.00 Max. 3.00 Max. 3.00 Max. 3.00
Phenol content none none none none
Water content, ррm Max. 200.00 Max. 200.00 Max. 200.00 Max. 200.00
Acc. to Note 2 GOST 20799-88
Kinematic viscosity at 40 °С, mm2/s range
25.00…35.00
range
41.00…51.00
range
51.00…75.00
range
75.00…95.00
Color by CNT colorimeter Max. 3,0 Max. 3,5 Max. 4,5 Max. 6,5
Mechanical impurities Max. 0,0050 Max. 0,0050 Max. 0,0050 Max. 0,0050
Water content Max. 0.0300 Max. 0.0300 Max. 0.0300 Max. 0.0300
Open cup flash point, °С Min.180 Min.200 Min.200 Min.215
Resins increase, % Max. 3.00
Phenol content, % Max. 0.0020 Max. 0.0020 Max. 0.0020 Max. 0.0020
Product name, grade, type, sort Industrial oil
IGP-18
Industrial oil
IGP-30
Industrial oil
IGP-38
Industrial oil
IGP-49
Industrial oil
IGP-72
Appearance corresponds corresponds corresponds corresponds corresponds Color by CNT colorimeter max. 2.0 max. 2.5 max. 3.0 max. 3.5 max. 5.0
Kinematic viscosity at 40 °С,
mm2/s
range
24.00…30.00
range
39.00…50.00
range
55.00…65.00
range
76.00…85.00
range
110.00…125.00
Viscosity Index min. 90 min. 90 min. 90 min. 90 min. 85
Density at 20 °С, kg/m3 max. 880.0 max. 885.0 max. 890.0 max. 895.0 max. 900.0
Acid number, mg КОН/1g max. 1.000 max. 1.000 max. 1.000 max. 1.000 max. 1.000
Ash, % max. 0.200 max. 0.200 max. 0.200 max. 0.200 max. 0.200
Open cup flash point, °С min. 180 min. 200 min. 210 min. 215 min. 220
16
Product name, grade, type, sort Industrial oil
IGP-18
Industrial oil
IGP-30
Industrial oil
IGP-38
Industrial oil
IGP-49
Industrial oil
IGP-72
Water content none none none none none
Pour point, °С max. -15 max. -15 max. -15 max. -15 max. -15
Impurities none none none none none
Water content traces traces traces traces traces
Sulfur content, % max. 1.00 max. 1.00 max. 1.00 max. 1.00 max. 1.00
Zink content, % min. 0.040 min. 0.040 min. 0.040 min. 0.040 min. 0.040
Copper strip corrosion, rating max. 1b max. 1b max. 1b max. 1b max. 1b
Corrosion resistance none none none none none
Foaming tendency 24°, cm3 max. 50.0 max. 50.0 max. 50.0 max. 50.0 max. 50.0
Foaming tendency 94°, cm3 max. 50.0 max.50.0 max.50.0 max.50,0 max.50,0
Foaming tendency 24/94°, cm3 max. 50.0 max. 50.0 max. 50.0 max. 50.0 max. 50.0
Foam stability at 24°, cm3 max. 5.0 max. 5.0 max. 5.0 max. 5.0 max. 5.0
Foam stability at 94°, cm3 max. 5.0 max. 5.0 max. 5.0 max. 5.0 max. 5.0
Foam stability at 24/94°, cm3 max. 5.0 max. 5.0 max. 5.0 max. 5.0 max. 5.0
Hot oil aging max. 0.35 max. 0.35 max. 0.35 max. 0.35 max. 0,35
Thermal oxidation stability max. 2.00 max. 2.00 max. 2.00 max. 2.00 max. 2.00
Saponification number, mg
КОН/g
range
0.8…2.5
range
0.8…2.5
range
0.8…2.5
range
0.8…2.5
range
0.8…2.5
Solid particles max. 0.0050 max. 0.0050 max. 0.0050 max. 0.0050 max. 0.0050
Water content max. 0.0300 max. 0.0300 max. 0.0300 max. 0.0300 max. 0.0300
17
b) Engine oil for gasoline internal-combustion engines.
Product name, grade,
type, sort
Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compliance
(RB/RF), Certificate of Customs
Union State Registration
Statement of Compliance to the
Technical Regulations of the
Customs Union
Engine oil
“NAFTAN GARANT” for
gasoline engines SAE 10W-40
API SJ/CD
ТY BY 300042199.026-2011 2710198200 23.20.18.511 Certificate of compliance: BY/112
03.03.028 02501 till 18.03.2017
ТС BY/112 11.01 ТР030 028
00046 till 10.04.2017
Engine oil
“NAFTAN GARANT” for
gasoline engines SAE 15W-40
API SJ/CD
ТY BY 300042199.026-2011 2710198200 23.20.18.511 Certificate of compliance: BY/112
03.03.028 02501 till 18.03.2017
ТС BY/112 11.01 ТР030 028
00046 till 10.04.2017
Engine oil
“NAFTAN GARANT” for
gasoline engines SAE 5W-40
API SJ/CD
ТY BY 300042199.026-2011 2710198200 23.20.18.511 Certificate of compliance: BY/112
03.03.028 02501 till 18.03.2017
ТС BY/112 11.01 ТР030 028
00046 till 10.04.2017
Engine oil “NAFTAN D3” SAE
10W-40
ТY BY 300042199.010-2009
Rev. 2710198200 23.20.18.511
Certificate of compliance: BY/112
03.03. 028 01539 до 27.12.2014
ТС BY/112 11.01 ТР030 028
00041 till 10.04.2017
Engine oil “NAFTAN PREM-
IER” for gasoline engines SAE
10W-40 API SL/CF
ТY BY 300042199.027-2011
till 23.12.2016 2710198200 23.20.18.511
Сертификат соответствия: ВУ/112
03.03. 028 02502 till 18.03.2017
ТС BY/112 11.01 ТР030 028
00047 till 10.04.2017
Engine oil “NAFTAN PREM-
IER” for gasoline engines SAE
15W-40 API SL/CF
ТY BY 300042199.027-2011
till 23.12.2016 2710198200 23.20.18.511
Certificate of compliance: ВУ/112
03.03. 028 02502 till 18.03.2017
ТС BY/112 11.01 ТР030 028
00047 till 10.04.2017
Engine oil “NAFTAN PREM-
IER” for gasoline engines SAE
5W-40 API SL/CF
ТY BY 300042199.027-2011
till 23.12.2016 2710198200 23.20.18.511
Certificate of compliance: ВУ/112
03.03. 028 02502 till 18.03.2017
ТС BY/112 11.01 ТР030 028
00047 till 10.04.2017
All-purpose engine oil М-8V GOST 10541-78 Rev. 2710198200 23.20.18.510 Certificate of compliance: ВY/112
03.03.028 00916 till 20.04.2016
ТС BY/112 11.01 ТР030 028
00040 till 10.04.2017
Engine oils “Naftan 2T” for two-
stroke gasoline engines
NAFTAN 2T-MIX (API TB)
ТY BY 300042199.017-2010
till 17.11.2015 2710198200 23.20.18.511
Certificate of compliance: ВY/112
03.03. 028 02040 till 30.01.2016
ТС BY/112 11.01 ТР030 028
00035 till 10.04.2017
Engine oils “Naftan 2T” for two-
stroke gasoline engines
NAFTAN 2T-SUPER (API TC)
ТY BY 300042199.017-2010
till 17.11.2015 2710198200 23.20.18.511
Certificate of compliance: ВY/112
03.03. 028 02040 till 30.01.2016
ТС BY/112 11.01 ТР030 028
00035 till 10.04.2017
Quality indicators.
Product name, grade, type, sort
Eng
ine
oil
“N
AF
TA
N
GA
RA
NT
” fo
r gas
oli
ne
en-
gin
es S
AE
10
W-4
0
Eng
ine
oil
“N
AF
TA
N
GA
RA
NT
” fo
r gas
oli
ne
en-
gin
es S
AE
15
W-4
0
Eng
ine
oil
“N
AF
TA
N
GA
RA
NT
” fo
r gas
oli
ne
en-
gin
es S
AE
5W
-40
Eng
ine
oil
“N
AF
TA
N D
3”
SA
E 1
0W
-40
Eng
ine
oil
“N
AF
TA
N
PR
EM
IER
” fo
r g
asoli
ne
eng
ines
SA
E 1
0W
-40
Eng
ine
oil
“N
AF
TA
N
PR
EM
IER
” fo
r g
asoli
ne
eng
ines
SA
E 1
5W
-40
Apparent viscosity (MRV)
at -25°С, mPa∙s
Max
7,000
Max
60,000
Max
60,000
Max
60,000
Apparent viscosity (CCS)
at -20°С, mPa∙s
Max
7,000
Max
7,000
Max
7,000
Apparent viscosity (CCS)
at -25°С, mPa∙s
Max
7,000
Max
7,000
Max
6,600
Max
7,000
Max
7,000
Max
7,000
Apparent viscosity (MRV)
at -30°С, mPa∙s
Max
60,000
Max
60,000
Max
60,000
Max
60,000
Max
60,000
Max
60,000
Pour point, °С Max -30 Max -25
Color by CNT colorimeter Max 3.5
Kinematic viscosity at 100°С, mm2/s
range 12.50…16.30
range 12.50…16.30
range 12.50…16.30
range 12.50…16.30
range 12.50…16.30
range 12.50…16.30
Viscosity index Min 135 Min 130 Min 140 Min 130 Min 140 Min 130
Flow point, °С Max -27 Max -22 Max -32 Max -32 Max -27 Max -22
Open-cup flash-point, °С Min 205 Min 205 Min 205 Min 205 Min 205 Min 205
18
Product name, grade, type, sort
Eng
ine
oil
“N
AF
TA
N
GA
RA
NT
” fo
r gas
oli
ne
en-
gin
es S
AE
10
W-4
0
Eng
ine
oil
“N
AF
TA
N
GA
RA
NT
” fo
r gas
oli
ne
en-
gin
es S
AE
15
W-4
0
Eng
ine
oil
“N
AF
TA
N
GA
RA
NT
” fo
r gas
oli
ne
en-
gin
es S
AE
5W
-40
Eng
ine
oil
“N
AF
TA
N D
3”
SA
E 1
0W
-40
Eng
ine
oil
“N
AF
TA
N
PR
EM
IER
” fo
r g
asoli
ne
eng
ines
SA
E 1
0W
-40
Eng
ine
oil
“N
AF
TA
N
PR
EM
IER
” fo
r g
asoli
ne
eng
ines
SA
E 1
5W
-40
Water content, % wt. Max 0.03 Max 0.03 Max 0.03 Max 0.03 Max 0.0300 Max 0.0300
Base number, mg KOH/1g Min 8.00 Min 8.00 Min 8.00 Min 8.50 Min 7.50 Min 7.50
Density at 20°С, kg/m3 Max 905.0 Max 905.0 Max 905.0 Max 905.0 Max 905.0
Sulphated ash, % Max 1.50 Max 1.50 Max 1.50 Max 1.60 Max 1.50 Max 1.50
ASTM color Max 3.5 Max 4.0 Max 3.0 Max 3.5 Max 4.0
Mechanical impurities content Max
0.0150
Max
0.0150
Max
0.015
Max
0.0150
Max
0.0150
Mechanical impurities content, % wt.
Max 0.015 Max 0.015 Max 0.015 Max 0.0150 Max 0.015 Max 0.015
Evaporation by Noack, % Max 22.0 Max 20.0 Max 22.0 Max 16.0 Max 15.0 Max 15.0
Calcium weight fraction, % Min 0.150 Min 0.150 Min 0.150 Min 0.150 Min 0.150
Zinc weight fraction, % Min 0.120 Min 0.120 Min 0.120 Min 0.100 Min 0.100
Phosphorus content, % Min 0.110 Min 0.110 Min 0.110 Max 0.120 Min 0.090 Min 0.090
Foaming tendency 24°, cm3 Max 10.0 Max 10.0 Max 10.0 Max 10.0 Max 10.0 Max 10.0
Foaming tendency 94°, cm3 Max 50.0 Max 50.0 Max 50.0 Max 50.0 Max 50.0 Max 50.0
Foaming tendency 24/94°, cm3 Max 10.0 Max 10.0 Max 10.0 Max 10.0 Max 10.0 Max 10.0
Foam stability at 24°, cm3 Max 0.0 Max 0.0 Max 0.0 Max 0.0 Max 0.0 Max 0.0
Foam stability at 94°, cm3 Max 0.0 Max 0.0 Max 0.0 Max 0.0 Max 0.0 Max 0.0
Foam stability at 24/94°, cm3 Max 0.0 Max 0.0 Max 0.0 Max 0.0 Max 0.0 Max 0.0
Stability, Induction period meth-
od, 40 hours
passed passed passed passed passed passed
Рb plate corrosiveness none none none none none
PZV detergency, points Max 0.5 Max 0.5 Max 0.5 Max 0.5 Max 0.5
Product name, grade, type, sort
Engine oil “NAFTAN PREM-
IER” for gasoline engines SAE
5W-40
Kinematic viscosity at 100°С, mm2/s range 12.50…16.30
Apparent viscosity (CCS) at -30°С, mPa∙s Max 6,600
Apparent viscosity (MRV) at -35°С, mPa∙s Max 60,000
Viscosity index Min 140
Flow point, °С Max -32
Open-cup flash-point, °С Min 205
Water content, % wt. Max 0.0300
Base number, mg KOH/1g Min 7.50
Density at 20°С, kg/m3 Max 905.0
Sulphated ash, % Max 1.50
ASTM color Max 3.0
Mechanical impurities content Max 0.0150
Mechanical impurities content, % wt. Max 0.015
Noack evaporation, % Max 15.0
Calcium weight fraction, % Min 0.150
Zinc weight fraction, % Min 0.100
Phosphorus content, % Min 0.090
Foaming tendency 24°, cm3 Max 10.0
Foaming tendency 94°, cm3 Max 50.0
Foaming tendency 24/94°, cm3 Max 10.0
Foam stability at 24°, cm3 Max 0.0
Foam stability at 94°, cm3 Max 0.0
Foam stability at 24/94°, cm3 Max 0.0
Stability, Induction period method, 40 hours passed
Рb plate corrosiveness none
PZV detergency, points Max 0.5
19
Product name, grade, type, sort All-purpose engine oil М-8V
Kinematic viscosity at 100°С, mm2/s range 7.50….50
Kinematic viscosity at 0°С, mm2/s Max 1,200.00
Viscosity index Min 93
Mechanical impurities content, % Max 0.0150
Water content traces
Open-cup flash-point, °С Min 207
Pour point, °С Max -25
Рb plate corrosiveness, g/m2 Max 10.0
Base number, mg KOH/1g Min 4.20
Sulphated ash, % Max 0.95
Stability, Induction period method, 30 hours passed
Color by CNT colorimeter Max 3.5
Density at 20°С, g/cm3 Max 0.9050
Calcium weight fraction, % Min 0.160
Zinc weight fraction, % Min 0.090
Phosphorus content, % Min 0.090
Water content Max 0.0300
Product name, grade, type, sort
Engine oils “Naftan 2T” for
two-stroke gasoline engines
NAFTAN 2T-MIX
Engine oils “Naftan 2T” for
two-stroke gasoline engines
NAFTAN 2T-SUPER
Kinematic viscosity at 100°С, mm2/s range 7.00…9.00 range 8.00…10.00
Pour point, °С Max -15 Max -15
Flow point, °С Max -12 Max -12
Open-cup flash-point, °С Min 115 Min 120
Water content Max 0.0300 Max 0.0300
Water content, % wt. Max 0.03 Max 0.03
Mechanical impurities content, % Max 0.0150 Max 0.0150
Base number, mg KOH/1g Min 0.70 Min 1.00
Sulphated ash, % Max 0.07 Max 0.10
c) Engine oils for diesel engines.
Product name, grade, type, sort Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compliance
(RB/RF), Certificate of
Customs Union State
Registration
Statement of Compliance to the
Technical Regulations of the Cus-
toms Union
Engine oil for automotive diesels
M-10G2 GOST 8581-78 Rev. 2710198200 23.20.18.510
Certificate of compliance:
ВY/112 03.03.028 00824
till 21.01.2016
ТС BY/112 11.01 ТР030 028 00029
till 25.03.2017
Engine oil for automotive diesels
М-10G2k,
Premium grade
GOST 8581-78 Rev. 2710198200 23.20.18.510
Certificate of compliance:
ВY/112 03.03.028 00917
till 20.04.2016
ТС BY/112 11.01 ТР030 028 00029
till 25.03.2017
Engine oil for automotive diesels
М-8G2k, Premium grade GOST 8581-78 Rev. 2710198200 23.20.18.510
Certificate of compliance:
ВY/112 03.03.028 00917
till 20.04.2016
ТС BY/112 11.01 ТР030 028 00029
till 25.03.2017
Engine oil for automotive diesels
М-14V2 GOST 12337-84 Rev. 2710198200 23.20.18.510
Certificate of compliance:
ВY/112 03.03.028 00065
till 28.07.2016
ТС BY/112 11.01 ТР030 028 00026
till 25.03.2017
Engine oil for automotive diesels
М-14G2CS GOST 12337-84 Rev. 2710198200 23.20.18.510
Certificate of compliance:
ВY/112 03.03.028 00065
till 28.07.2016
ТС BY/112 11.01 ТР030 028 00026
till 25.03.2017
Oil
NAFTAN Diesel Plus L
10W40
ТY BY 300042199.029-
2012 2710198200 23.20.18.511
ТС BY/112 11.01 ТР030 028 00058
till 04.06.2017
20
Product name, grade, type, sort Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compliance
(RB/RF), Certificate of
Customs Union State
Registration
Statement of Compliance to the
Technical Regulations of the Cus-
toms Union
Oil
NAFTAN Diesel Ultra L
10W40
ТY BY 300042199.030-
2012 2710198200 23.20.18.511
ТС BY/112 11.01 ТР030 028 00053
till 20.05.2017
Oil
NAFTAN Diesel Plus L
15W40
ТY BY 300042199.029-
2013 2710198201 23.20.18.512
ТС BY/112 11.01 ТР030 028 00058
till 04.06.2018
Oil
NAFTAN Diesel Ultra L
15W40
ТY BY 300042199.030-
2012 2710198200 23.20.18.511
ТС BY/112 11.01 ТР030 028 00053
till 20.05.2017
Quality indicators.
Product name, grade, type, sort Engine oil for automotive
diesels M-10G2
Engine oil for automotive
diesels М-10G2k, Premium
grade
Engine oil for automotive
diesels М-8G2k, Premium
grade
Parameter Standard Standard Standard
Kinematic viscosity at 100°С, mm2/s range 10.50…11.50 range 10.50…11.50 range 7.50…8.50
Kinematic viscosity at 0°С, mm2/s Max 1,200.00
Viscosity index Min 85 Min 95 Min 95
Mechanical impurities content, % Max 0.0150 Max 0.0150 Max 0.0150
Open-cup flash-point, °С Min 210 Min 220 Min 210
Pour point, °С Max -15 Max -18 Max -30
Рb plate corrosiveness, g/m2 Max 20.0 none none
PZV detergency, points Max 1.0 Max 0.5 Max 0.5
Base number, mg KOH/1g Min 6.00 Min 6.00 Min 6.00
Thermal stability at 250°С, min Min 90 Min 65 Min 65
Sulphated ash, % Max 1.65 Max 1.15 Max 1.15
Thermal oxidation stability Min 90.00
Stability, Induction period method, 40 hours passed
Color by CNT colorimeter Max 5.0 Max 3.0 Max 3.0
Density at 20°С, g/cm3 Max 0.9050 Max 0.9000 Max 0.9050
Stability, Induction period method, 50 hours passed passed passed
Calcium weight fraction, % Min 0.250 Min 0.190 Min 0.190
Zinc weight fraction, % Min 0.060 Min 0.050 Min 0.050
Phosphorus content, % Min 0.060 Min 0.050 Min 0.050
Purity level, mg/100 g of oil Max 500 Max 450 Max 450
Pour point, °С Max -18
Water content Max 0.0300 Max 0.0300 Max 0.0300
Product name, grade, type, sort Engine oil for automotive
diesels М-14V2
Engine oil for automotive
diesels М-14G2CS
Parameter Standard Standard
Kinematic viscosity at 100°С, mm2/s range 13.50…14.50 range 13.50…15.00
Viscosity index Min 85 Min 92
Base number, mg KOH/1g Min 4.80 Min 9.00
Sulphated ash, % Max 1.20 Max 1.50
Mechanical impurities content, % Max 0.0200 Max 0.0100
Open-cup flash-point, °С Min 210 Min 215
Pour point, °С Max -12 Max -10
Рb plate corrosiveness none none
Stability, Induction period method, 50 hours passed passed
Purity level, mg/100 g of oil Max 600 Max 600
Load wear index, kgs Min 37.00 Min 34.00
Critical load, kgs Min 80.0 Min 84.0
21
Product name, grade, type, sort Engine oil for automotive
diesels М-14V2
Engine oil for automotive
diesels М-14G2CS
Parameter Standard Standard
Wear variable, mm Max 0.40 Max 0.40
Color, by CNT colorimeter Max 4.0 Max 4.0
Density at 20°С, kg/m3 Max 910.0 Max 910.0
Calcium weight fraction, % Min 0.230 Min 0.280
Zinc weight fraction, % Min 0.045 Min 0.045
Phosphorus content, % Min 0.040 Min 0.040
Water content Max 0.0300 Max 0.0300
Base number decrease, % Max 10
Sulphated ash decrease, % Max 10
Emulsibility with water Max 0.50
Product name, grade, type, sort
Oil NAFTAN
Diesel Plus L
10W40
Oil NAFTAN
Diesel Ultra L
10W40
Parameter Standard Standard
Kinematic viscosity at 100°С, mm2/s range 13.50…16.30 range 13.50…16.30
Apparent viscosity (CCS) at -25°С, mPa∙s Max 7,000 Max 7,000
Apparent viscosity (MRV) at -30°С, mPa∙s Max 60,000 Max 60,000
Viscosity index Min 130 Min 130
Flow point, °С Max -32 Max -32
Open-cup flash-point, °С Min 205 Min 205
Water content, % wt. Max 0.03 Max 0.03
Base number, mg KOH/1g Min 8.00 Min 9.00
Sulphated ash, % Max 1.50 Max 1.60
Mechanical impurities content, % Max 0.0150 Max 0.0150
Noack evaporation, % Max 16.0 Max 15.0
Calcium weight fraction, % Min 0.250 Min 0.300
Zinc weight fraction, % Min 0.090 Min 0.100
Phosphorus content, % Max 0.120 Max 0.120
Foaming tendency 24°, cm3 Max 10.0 Max 10.0
Foaming tendency 94°, cm3 Max 50.0 Max 50.0
Foaming tendency 24/94°, cm3 Max 10.0 Max 10.0
Foam stability at 24°, cm3 Max 0.0 Max 0.0
Foam stability at 94°, cm3 Max 0.0 Max 0.0
Foam stability at 24/94°, cm3 Max 0.0 Max 0.0
Product name, grade, type, sort
Oil NAFTAN
Diesel Plus L
15W40
Oil NAFTAN
Diesel Ultra L
15W40
Parameter Standard Standard
Kinematic viscosity at 100°С, mm2/s range 13.50…16.30 range 13.50…16.30
Apparent viscosity (CCS) at -20°С, mPa∙s Max 7,000 Max 7,000
Apparent viscosity (MRV) at -25°С, mPa∙s Max 60,000 Max 60,000
Viscosity index Min 120 Min 120
Flow point, °С Max -27 Max -27
Open-cup flash-point, °С Min 210 Min 210
Water content, % wt. Max 0.03 Max 0.03
Base number, mg KOH/1g Min 8.00 Min 9.00
Sulphated ash, % Max 1.50 Max 1.60
Mechanical impurities content, % Max 0.0150 Max 0.0150
Noack evaporation, % Max 16.0 Max 15.0
Calcium weight fraction, % Min 0.250 Min 0.300
Zinc weight fraction, % Min 0.090 Min 0.100
Phosphorus content, % Max 0.120 Max 0.120
Foaming tendency 24°, cm3 Max 10.0 Max 10.0
Foaming tendency 94°, cm3 Max 50.0 Max 50.0
Foaming tendency 24/94°, cm3 Max 10.0 Max 10.0
Foam stability at 24°, cm3 Max 0.0 Max 0.0
22
Product name, grade, type, sort
Oil NAFTAN
Diesel Plus L
15W40
Oil NAFTAN
Diesel Ultra L
15W40
Parameter Standard Standard
Foam stability at 94°, cm3 Max 0.0 Max 0.0
Foam stability at 24/94°, cm3 Max 0.0 Max 0.0
d) Transmission oils are lube oils for lubrication of gear boxes, drop boxes, drive axle gears, steering
gears, as well as for all kinds of transmission and chain gears (reducers).
Product name, grade,
type, sort
Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compliance
(RB/RF), Certificate of
Customs Union State Reg-
istration
Statement of
Compliance to the
Technical Regula-
tions of the Cus-
toms Union
Transmission oil NAFTAN-T
ТY 0253-033-00219158-98 Rev.
2710198800 23.20.18.594
Certificate of compliance:
ВY/112 03.03.028 00035
till 19.06.2016
ТС BY/112 11.01
ТР030 028 00042
till 10.04.2017
Transmission oil TEp-15
GOST 23652-79 Rev.
2710198800 23.20.18.594
Certificate of compliance:
ВY/112 03.03. 028 01666
till 08.04.2015
ТС BY/112 11.01
ТР030 028 00045
till 10.04.2017
Transmission oil
“Naftan TI5-1”
ТY RB 300220696.007-2002
Rev. 2710198800 23.20.18.594
ТС BY/112 11.01 ТР030 028 00037
till 10.04.2017
Transmission oil
“Naftan TI5-2”
ТY RB 300220696.007-2002
Rev. 2710198800 23.20.18.594
ТС BY/112 11.01 ТР030 028 00037
till 10.04.2017
Quality indicators.
Product name, grade, type, sort Transmission oil
NAFTAN-T
Parameter Standard
Kinematic viscosity at 100°С, mm2/s range 14.00…16.00
Dynamic viscosity at -26°С, mPa∙s Max 150,000
Viscosity index Min 90
Open-cup flash-point, °С Min 190
Pour point, °С Max -28
Mechanical impurities content, % Max 0.0100
Water content traces
Copper strip corrosion, points Max 2s
Foaming tendency 24°, cm3 Max 50.0
Foaming tendency 94°, cm3 Max 50.0
Foaming tendency 24/94°, cm3 Max 50.0
Load wear index, N Min 490
Load wear index, kgs Min 50.00
Welding load, kgs Min 255
Compatibility with rubber, % range 1…8
Density at 20°С, g/cm3 Max 0.9100
Viscosity increase at 100°С, % Max 7.0
Sediments in light petroleum, % Max 1.00
Water content Max 0.0300
23
Product name, grade, type, sort Transmission oil
TEp-15
Parameter Standard
Density at 20°С, g/cm3 Max 0.9500
Kinematic viscosity at 100°С, mm2/s range 14.00…16.00
Dynamic viscosity at -15°С, Pa∙s Max 200
Open-cup flash-point, °С Min 185
Pour point, °С Max -18
Mechanical impurities content, % wt. Max 0.030
Water content Max 0.0300
Corrosion test on steel plate passed
Ash content, % Min 0.300
Phosphorus content, % Min 0.060
Sulfur content, % wt. Max 3.000
Viscosity increase at 100°С, % Max 25.0
Sediments in light petroleum, % Max 0.70
Wear variable, mm Max 0.55
Compatibility with rubber, % range 4…10
Water-soluble acids and alkali contents none
Product name, grade, type, sort Transmission oil
“Naftan TI5-1”
Transmission oil
“Naftan TI5-2”
Parameter Standard Standard
Kinematic viscosity at 100°С, mm2/s Min 15.00 Min 16.50
Viscosity index Min 90 Min 90
Open-cup flash-point, °С Min 180 Min 180
Pour point, °С Max -30 Max -25
Water content none traces
Mechanical impurities content, % Max 0.0050 Max 0.0050
Density at 20°С, kg/m3 Max 910.0 Max 910.0
Dynamic viscosity at -26°С, Pa∙s Max 150.00
Dynamic viscosity at -12°С, Pa∙s Max 150.0
Copper strip corrosion, points Max 2s Max 2s
Viscosity increase at 100°С, % Max 80.0 Max 80.0
Sediments in light petroleum, % Max 3.00 Max 3.00
Sediments in gasoline, % Max 2.00 Max 2.00
Compatibility with rubber, % range 1 - 6 range 1 - 6
Foaming tendency 24°, cm3 Max 50.0 Max 50.0
Foaming tendency 94°, cm3 Max 50.0 Max 50.0
Foaming tendency 24/94°, cm3 Max 50.0 Max 50.0
Load wear index, N Min 58 Min 58
Welding load, kgs Min 376 Min 376
Water content Max 0.0300 Max 0.0300
Mechanical impurities content none none
e) Special purpose oils. This group includes several kinds of oils produced by OJSC “Naftan”, not
included in above-mentioned classes.
Product name, grade, type, sort Technical regulatory documents
Foreign Trade
Goods Classifi-
cation of the
Customs Union
National Index of
the Republic of
Belarus
Base oil – body of M-20-V2/F oil ТY 38.1011195-89 Rev. 2710199800 23.20.18.500
24
Product name, grade, type, sort Base oil – body of M-20-V2/F
oil
Parameter Standard
Kinematic viscosity at 100°С, mm2/s Min 19.00
Viscosity index Min 87
Con. Carbon residue, % Max 0.450
Open-cup flash-point, °С Min 250
Pour point, °С Max -15
Color by CNT colorimeter Max 6.5
Mechanical impurities content none
Water content traces
Density at 20°С, kg/m3
Mechanical impurities content Max 0.0050
Water content Max 0.0300
Oil for hydrostatic drives is intended for usage in hydraulic systems of agricultural and other equip-
ment working at pressure of 35 MPa with a short-term increase to 42 MPa.
Product name, grade, type, sort Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National Index
of the Repub-
lic of Belarus
Statement of Compliance to the
Technical Regulations of the Cus-
toms Union
Oil for hydrostatic drives
MGE-46V
ТY 38.001347-00
Rev. 2710198400 23.20.18.591
ТС BY/112 11.01 ТР030 028 00043
till 10.04.2017
Product name, grade, type, sort Oil for hydrostatic drives
MGE-46V
Parameter Standard
Kinematic viscosity at 100°С, mm2/s Min 6.00
Mechanical impurities content Max 0.0050
Water content Max 0.00
Neutralization number, mg KOH/1g range 0.700…1.500
Compressor oil from sulfur crude oils KS-19 is intended for lubrication of displacement and rotary
compressors and blowers.
Product name, grade, type, sort Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compliance
(RB/RF), Certificate of
Customs Union State
Registration
Statement of Compliance to the
Technical Regulations of the
Customs Union
Compressor oil from sulfur
crude oils KS-19
GOST 9243-75
Rev.
2710198200 23.20.18.590 Certificate of Compliance: ВY/112 03.03.028 00067
till 29.07.2016
ТС BY/112 11.01 ТР030 028 00028
till 25.03.2017
25
Product name, grade, type, sort Compressor oil from sulfur crude oils KS-
19
Parameter Standard
Kinematic viscosity at 100°С, mm2/s range 18.00…22.00
Viscosity index Min 85
CCR, % Max 0.500
Neutralization number, mg KOH/1g Max 0.020
Ageing residue, % none
Neutralization number, mg KOH/1g Max 0.500
Total neutralization number, mg KOH/g Max 0.50
Ash content, % Max 0.005
Water-soluble acids and alkali content none
Phenol content none
Mechanical impurities content none
Water content none
Sulfur content, % Max 1.10
Color by CNT colorimeter Max 7.0
Open-cup flash-point, °С Min 260
Pour point, °С Max -15
Рb plate corrosiveness, г/м2 Max 10.0
Varnish formation tendency, % Max 3.50
Density at 20°С, g/cm3 Max 0.9050
Mechanical impurities content Max 0.0050
Water content Max 0.00
Plasticizing oil (petroleum softener) is a blend of lube fractions solvent extracts. It is used as artificial
rubbers extender and plasticizer and as rubber mixes softener.
Product name, grade, type, sort Technical regulatory documents
Foreign Trade
Goods Classifi-
cation of the
Customs Union
National Index of
the Republic of
Belarus
Plasticizing oil (PN-6 oil) grade PN-6k ТY 38.1011217-89 Rev. 2713909000 23.20.18.500
Plasticizing oil (PN-6 oil) grade PN-6sh ТY 38.1011217-89 Rev. 2713909000 23.20.18.500
Product name, grade, type, sort Plasticizing oil
grade PN-6k
Plasticizing oil
grade PN-6sh
Parameter Standard Standard
Kinematic viscosity at 100°С, mm2/s range 30.00…35.00 range 32.00…40.00
Refraction index at 50°С Min 1.5200 Min 1.5250
Aniline point, °С Max 67.0 Max 65.0
Phenol content, % Max 0.01 Max 0.01
Mechanical impurities content none none
Water content traces traces
Open-cup flash-point, °С Min 230 Min 230
Pour point, °С Max 36 Max 36
Density at 20°С, g/cm3 Min 0.9500 Min 0.9600
Paraffin-naphthenic hydrocarbons content,
%
Max 14.0 Max 14,0
Resins content, % Max 8.0 Max 8,0
Water content range 0.0000…0.0300 range 0.0000…0.0300
26
PETROLEUM SOLVENTS are petroleum-derived products used for dilution of paints and varnish-
es, removal of rust-preventing coating layers and contaminations. They are blends of aromatic and
aliphatic hydrocarbons, extracted from different refining processes light-end products.
Produced goods.
Product name, grade, type, sort Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compliance (RB/RF), Certifi-
cate of Customs Union State Registration
Nefras S4-150/200
(white spirit substitute)
ТY РБ 100006485.147-2002
Rev. 2710122500 24.30.22.700
Petroleum solvent
(Nefras S2-80/120) First grade
ТY РБ 100006485.148-2002
Rev. 2710122500 23.20.13.300
Paints and varnishes solvent 646
GOST 18188-72 Rev. 3814001000 34.30.22.700
Certificate of Compliance:
ВY/112 03.03.028 00053 till 11.07.2016 Certificate of Customs Union State Registra-
tion: BY.20.21.01.008.Е.000102.03.11
Paints and varnishes solvent 647
GOST 18188-72 Rev. 3814001000 34.30.22.700
Certificate of Compliance:
ВY/112 03.03.028 00053 till 11.07.2016 Certificate of Customs Union State Registra-
tion: BY.20.21.01.008.Е.000102.03.11
Paints and varnishes solvent
648 GOST 18188-72 Rev. 3814001000 24.30.22.700
Certificate of Compliance: ВY/112 03.03.028 00053 till 11.07.2016
Certificate of Customs Union State Registra-
tion: BY.20.21.01.008.Е.000102.03.11
Paints and varnishes solvent
R-12 GOST 7827-74 Rev. 3814009000 24.30.22.700
Certificate of Compliance: ВY/112 03.03.028 00054 till 11.07.2016
Certificate of Customs Union State Registra-
tion: BY.20.21.01.008.Е.000106.03.11
Paints and varnishes solvent
R-4 GOST 7827-74 Rev. 3814001000 24.30.22.700
Certificate of Compliance:
ВY/112 03.03.028 00054 till 11.07.2016
Certificate of Customs Union State Registra-tion: BY.20.21.01.008.Е.000106.03.11
Solvent 651 ТY РБ 100006485.134-2001 Rev.
3814009000 24.30.22.700
Certificate of Compliance:
ВY/112 03.03. 028 01524 till 14.12.2014 Certificate of Customs Union State Registra-
tion: BY.20.21.01.008.Е.000100.02.11
Solvent RS-2 ТY РБ 100006485.132-2001 Rev.
3814009000 24.30.22.700
Certificate of Compliance:
ВY/112 03.03. 028 01523 till 14.12.2014 Certificate of Customs Union State Registra-
tion: BY.20.21.01.008.Е.000101.03.11
Petroleum solvent (Nefras-А-130/150)
GOST 10214-78 Rev. 2902440000 24.30.22.700
Certificate of Compliance: ВY/112 03.03.028 01989 till 12.12.2015
Certificate of Customs Union State Registra-
tion: 08-33-2.90907 till 22.09.2015
Nefras S4-150/200 (white spirit substitute) is used for dilution of oil paints, enamels, varnishes, other
paints and varnishes, base coatings, drying oil and bituminous materials, filling paints, rust-proofing
agents, and for degreasing of surfaces.
Petroleum solvent (Nefras S2-80/120) is used in rubber industry for dilution of paints, enamels, for
degreasing of surfaces for gumming up, as extracting agent in organic chemistry.
27
Quality indicators.
Product name, grade, type, sort Nefras S4-150/200
(white spirit substitute)
Petroleum solvent
(Nefras S2-80/120)
First grade
Parameter Standard Standard
Density at 20 °С, kg/m3 Max 790.0 Max 730.0
Initial boiling point, °С Min 140 Min 80
93% boils out at t, °С Max 110
98% boils out at t, °С Max 215 Max 120
Residue and wastes, % Max 1,5
Closed-cup flash-point, °С (M/P) Min 31
Bromine value, g Вr/100 ml Max 0.090
Xylene volatility range 2.00…10.00
Aromatic hydrocarbons content, % wt. Max 19.5 Max 2.5
Sulfur content, % wt. Max 0.250 Max 0.00100
Copper strip corrosion test passed passed
Water-soluble acids and alkali contents none none
Mechanical impurities and water content none none
Color conforms
Solvent 646 is used for dilution of nitrovarnishes, nitro-dyes (stains), filling paints and other paints
and varnishes, as well as for degreasing of surfaces, flushing of equipment etc.
Solvent 647 is used for dilution of nitrocellulose and other paints and varnishes in car industry, for
adjusting consistency of paints and varnishes.
Solvent 648 is used for adjusting consistency of nitrocellulose, butyl methylacrylate and polyacrylate
paints and varnishes.
Solvent R-12 is used for dilution of paints and varnishes based on polyvinylchloride chlorinated res-
ins (chlorinated PVC resins), vinyl chloride copolymers and other film-forming substances.
Solvent R-4 is used for dilution of paints and varnishes based on polyvinylchloride chlorinated resins
(chlorinated PVC resins), vinyl chloride copolymers, epoxy resins and other film-forming substances
(excluding grey and protective XB-124 enamel).
Product name,
grade, type, sort
Color and
appearance
Water con-
tent,
% wt.
Diethyl
ether vola-
tility
Neutralization
number, mg
KOH/1g
Coagulation
number
Dilution abil-
ity
Closed-cup
flash-point,
°С (M/P)
Paints and
varnishes solvents
646
conforms Max 2.00 range
8.0…15.0
Max 0.060 Min 35.0 passed Min -1
Paints and
varnishes solvents
647
conforms Max 0.60 range
8.0…12.0
Max 0.060 Min 60.0 passed Min 4
Paints and
varnishes solvents
648
conforms Max 1.00 range
11.0…18.0
Max 0.060 Min 100.0 passed Min 11
Paints and varnish-
es solvents R-12
conforms Max 1.00 range
8.0…14.0
Max 0.100 Min 22.0 passed Min 5
Paints and varnish-
es solvents R-4
conforms Max 0.70 range
5.0…15.0
Max 0.070 Min 24.0 passed Min -10
Petroleum solvent (Nefras А-130/150) is used for dilution of varnishes, paints and enamels, as well
as for dissolving of oils, bitumens and rubber resins.
28
Product
name,
grade, type,
sort
Color and
appear-
ance
Density at
20°С,
g/cm3
IBP,
°С
90% boils
out at t,
°С
Xylene
volatility
Sulfur
content,
% wt.
Sulphonating
substances
content,
% vol.
Reaction
of
aqueous
extract
Open-
cup
flash-
point, °С
Petroleum
solvent
(Nefras
А-130/150)
conforms Min
0.8600
Min
134
Max
150
Max
1.20
Max
0.020
Min
99.0
neutral Min
27
Solvent 651 a blend of 90% white spirit and 10% butanol used for dilution of oil paints, bituminous
varnish and PF enamel.
Solvent RS-2— is a blend of 70% white spirit and 30% xylene used for dilution of oil paints, bitumi-
nous varnish and PF enamel.
Product name, grade, type, sort Solvent RS-2
Parameter Standard
Color and appearance conforms
Dilution ability passed
Oil stain test passed
SULFURIC ACID is an oil-refining by-product, obtained by wet catalysis from hydrogen sulfide of
fuels hydrotreatment. Due to the nature of raw material petroleum-derived sulfuric acid has high puri-
ty, which determines the diversity of applications. The main consumer of sulfuric acid is mineral fer-
tilizers production, it is also used in organic and inorganic synthesis, production of fibers, colorants,
explosives, catalysts and adsorbents, in food and pharmaceutical industries, etc.
Produced goods.
Product name, grade, type, sort
Technical regulatory
documents
Foreign Trade
Goods Classifi-
cation of the
Customs Union
National
Index of the
Republic of
Belarus
Contact sulfuric acid, type K ТУ BY 300220696.043-2007
Rev. 2807001000 24.13.14.330
Commercial contact sulfuric acid, grade 1 GOST 2184-77 Rev. 2807001000 24.13.14.310
Commercial contact sulfuric acid, grade 2 GOST 2184-77 Rev. 2807001000 24.13.14.310
Sulfuric acid, type K ТУ 113-08-617-87 Rev. 2807001000 24.13.14.300
Product name, grade, type, sort Solvent 651
Parameter Standard
Color and appearance conforms
Density at 20°С, kg/m3 Max 792.0
Xylene volatility range 1,50…10,00
Water content traces
Oil spot test passed
29
Quality indicators.
Product name, grade, type, sort Commercial contact sulfuric acid,
type K
No. Parameter Standard
1 Monohydrate (H2SO4) mass fraction, %, max 92.5…94.0
2 Iron (Fe) mass fraction, %, max 0.006
3 Chrome (Cr) content, mg/kg, max 0.7
4 Molybdenum (Mo) content, mg/kg, max 0.1
5 Sulfur dioxide (SO2) content, mg/kg, max 20
6 Elemental sulfur (S) content, mg/kg, max 0.15
7 Organic content, optical density c.u., max 0.08
8 Ignition residue mass fraction, %, max 0.02
9 Nitrogen oxides (N2O3) mass fraction, %, max 0.02
10 Transparency Transparent without dilution
11 Color, cm3, of blank solution, max 1
Product name, grade, type,
sort
Monohydrate
(H2SO4) mass
fraction,
%
Iron content,
%
Ignition resi-
due content,
%
Transparency Color, cm3, of
blank solution
Commercial contact sulfuric
acid, grade 1
Min
92.50
Max
0.0200
Max
0.050
Transparent
without dilu-
tion
Max 6
Commercial contact sulfuric
acid, grade 2
Min
92.50
Max
0.1000
Product name,
grade, type,
sort
Monohy-
drate
(H2SO4)
mass frac-
tion,
%
Copper (Сu)
mass frac-
tion,
mg/kg
Chrome
content,
mg/kg
Molyb-
denum (Мо)
mass frac-
tion,
mg/kg
Sulfur diox-
ide mass
fraction,
mg/kg
Elemental
sulfur mass
fraction,
mg/kg
Organic
content,
optical den-
sity c.u.
Iron content,
mg/kg
Sulfuric acid,
type K
Min 92.50 Max 0.2 Max 0.7 Max 0.1 Max 20 Max 0.15 Max 0.08 Max 75,0
HEAVY FUELS. Heavy fuels in this catalogue nominally include petroleum products having resid-
ual straight-run fractions and secondary processes residues as basis, which initial boiling point is
above 350 °С. Such fuels are used at power plants for heat and electricity production. A certain
amount of light gasoil (diesel) cuts is added to reduce viscosity. Today their usage is cut down due to
ecological reasons, because such fuels combustion is associated with higher pollutants emission than
light petroleum fuels. However, several kinds of heavy fuels also present in OJSC “Naftan” product
range.
30
Produced goods.
Product name, grade, type, sort
Technical
regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compliance
(RB/RF), Certificate of
Customs Union State
Registration
Statement of Com-
pliance to the
Technical Regula-
tions of the Cus-
toms Union
Heating oil
Type I
ТУ 38.101656-2005
Rev. 2710196209 23.20.17.710
Heating oil
Type IV
ТУ 38.101656-2005
Rev. 2710196209 23.20.17.710
Low viscosity low-sulfur marine fuel oil
ТУ BY
300220696.045-2009
Rev.
2710196209 23.20.17.710
Residual fuel oil 100,
Type V, ashy, Pour point 25 °С
GOST 10585-99
Rev. 2710196609 23.20.17.700
Certificate of Compliance:
ВY/112 03.03.028 01742 till 09.06.2015
ТС BY/112 11.01
ТР013 002 00014 till 31.12.2016
Residual fuel oil 100,
Type V, low-ash,
Pour point 25 °С
GOST 10585-99 Rev.
2710196609 23.20.17.700
Certificate of Compliance:
ВY/112 03.03.028 01742
till 09.06.2015
ТС BY/112 11.01
ТР013 002 00013
till 31.12.2016
Residual fuel oil 100,
Type VI, low-ash, Pour point 25 °С
GOST 10585-99
Rev. 2710196809 23.20.17.700
Certificate of Compliance:
ВY/112 03.03.028 01742 till 09.06.2015
ТС BY/112 11.01
ТР013 002 00015 till 31.12.2016
Residual fuel oil 100,
Type VI, ashy, Pour point 25 °С
GOST 10585-99
Rev. 2710196809 23.20.17.700
Certificate of Compliance:
ВY/112 03.03.028 01742 till 09.06.2015
ТС BY/112 11.01
ТР013 002 00016 till 31.12.2016
Quality indicators.
Product name, grade, type, sort Heating oil
Type I Type IV
Parameter Standard Standard
50% boils out at t, °С Min 300
10% boils out at t, °С Min 160 Min 160
Distillated below 350°С, % Max 85.0
Distillated below 360°С, % Min 90.0 Min 90.0
90% boils out at t, °С Max 360 Max 360
Kinematic viscosity at 20°С, mm2/s Max 8.000 Max 8.000
Pour point, °С Max -5/ Max -15 Max -5/ Max -15
Closed-cup flash-point, °С (M/P) Min 45 Min 45
Sulfur content, % wt. Max 0.035 Max 0.50
Hydrogen sulfide content none none
Copper strip corrosion test passed passed
Water-soluble acids and alkali contents none none
Acidity, mg KOH/100cm3 Max 5.00 Max 5.00
Ash, % Max 0.020 Max 0.020
CCR of 10% residue, % Max 0.350 Max 0.350
Water content none traces
Mechanical impurities content none none
Color conforms conforms
31
Product name, grade, type, sort Low viscosity low-sulfur marine fuel oil
Type I Type II
Parameter Standard Standard
Density at 15°С, kg/m3 Max 895.0 Max 895.0
Distillated below 250°С, % Max 65.0 Max 65.0
Distillated below 350°С, % Max 85.0 Max 85.0
Kinematic viscosity 20°С, mm2/s Max 11.500 Max 11.500
Closed-cup flash-point, °С (M/P) Min 62 Min 62
CCR of 10% residue, % Max 0.300 Max 0.300
Pour point, °С Max 0 Max 0.03
Water content traces traces
Water content, % wt. Max 0.03 Max 0
Color by CNT colorimeter Max 3.0 Max 3.0
ASTM color Max 3.0
Sulfur content, % wt. Max 0.005 Max 0.200
Mechanical impurities content none none
Water-soluble acids and alkali contents none none
Product name, grade, type, sort
Residual fuel oil 100
Type V Type VI
ashy low-ash ashy low-ash
Parameter Standard Standard Standard Standard Reference viscosity at 80°С, ref. degrees Max 16.00 Max 16.00 Max 16.00 Max 16.00
Reference viscosity at 100°С, ref. degrees Max 6.80 Max 6.80 Max 6.80 Max 6.80
Ash, % Max 0.140 Max 0.050 Max 0.140 Max 0.050
Mechanical impurities content, % Max 1.0000 Max 1.0000 Max 1.0000 Max 1.0000
Water content, % wt. Max 1.00 Max 1.00 Max 1.00 Max 1.00
Water-soluble acids and alkali contents none none none none
Sulfur content, % wt. Max 2.500 Max 2.500 Max 3.000 Max 3.000
Hydrogen sulfide and mercaptans content none none none none
Open-cup flash-point, °С Min 110 Min 110 Min 110 Min 110
Pour point, °С Max 25 Max 25 Max 25 Max 25
Lower heating value, kJ/kg Min 39,900 Min 39,900 Min 39,900 Min 39,900
Water-soluble acids and alkali contents range
6.0…8.0
range
6.0…8.0
range
6.0…8.0
range
6.0…8.0
32
SPECIAL-PURPOSE PETROLEUM PRODUCTS.
This section includes petroleum products for various purposes, not included in other sections.
Product name, grade, type, sort Technical regulatory
documents
Foreign
Trade Goods
Classification
of the Cus-
toms Union
National
Index of the
Republic of
Belarus
Certificate of Compli-
ance (RB/RF), Certifi-
cate of Customs Union
State Registration
Statement of
Compliance to
the Technical
Regulations of
the Customs
Union
Mixed vacuum gasoil ТУ BY 300042199.008-2008
Rev. 2710196409 23.20.18.500
Certificate of Compliance:
ВY/112 03.028 01743 till 09.06.2015
Slop wax, grade 1 ТУ РБ 300220696.009-2002
Rev. 2712903900 23.20.31.900
Slop wax, grade 2 ТУ РБ 300220696.009-2002
Rev. 2712903900 23.20.31.900
Slop wax, grade 3 ТУ РБ 300220696.009-2002 Rev.
2712903900 23.20.31.900
Slop wax, grade 4 ТУ РБ 300220696.009-2002 Rev.
2712903900 23.20.31.900
Commercial deasphalted oil ТУ BY 300220696.044-2008
Rev. 2713909000 23.20.32.700
Lamp oil grade KО-20 ТУ 38.401-58-10-01
Rev. 2710192500 23.20.14.200
Certificate of Compliance: ВY/112 03.03. 028 01597
till 21.02.2015
Industrial eco-friendly kerosene
oil ТУ BY 300042199.025-2011 2710192500 23.20.14.900
Petrolatum grade PS-55 ТУ 38.401166-90
Rev. 2712109000 23.20.31.100
Petrolatum grade PS-60 ТУ 38.401166-90 Rev.
2712109000 23.20.31.100
Hydrocracking residual product ТУ BY 300220696.034-2005
Rev. 2710196109 23.20.32.700
Feedstock for petroleum bitumens
production, grade 1
ТУ РБ 300220696.011-2002
Rev. 2713909000 23.20.32.700
Feedstock for petroleum bitumens
production, grade 2
ТУ РБ 300220696.011-2002
Rev. 2713909000 23.20.32.700
Feedstock for petroleum bitumens production, grade 3
ТУ РБ 300220696.011-2002 Rev.
2713909000 23.20.32.700
Wide fraction of light hydrocar-bons, grade A
ТУ 38.101524-93 Rev.
2710001100 23.20.13.300
Wide fraction of light hydrocar-
bons, grade B
ТУ 38.101524-93
Rev. 2710001100 23.20.13.300
Petroleum extract ТУ РБ 05778477-25-93
Rev. 2710199100 23.20.32.700
Raw pyrolysis gasoline, straight-
run gasoline grade А
ТУ 38.402-62-120-90
Rev. 2710121100 23.20.13.300
Raw pyrolysis gasoline, straight-
run gasoline grade B
ТУ 38.402-62-120-90
Rev. 2710121100 23.20.13.300
а) Mixed vacuum gasoil is a wide hydrocarbon fraction obtained by residual fuel oil vacuum distilla-
tion. It is used in manufacturing of base oils and solid paraffins, as feedstock at pyrolysis, hy-
drocracking and catalytic cracking units.
33
Quality indicators.
Product name, grade, type, sort Mixed vacuum gasoil
Parameter Standard
Kinematic viscosity at 50°С, mm2/s range 25.100…90.000
Density at 20°С, kg/m3 range 860.0…950.0
Kinematic viscosity at 40°С, mm2/s range 10.00…14.00
Pour point, °С Max 10
Sulfur content, % Max 2.00
Flow point, °С Min 19
Open-cup flash-point, °С Min 100
Color by CNT colorimeter Max 3.0
Closed-cup flash-point, °С (M/P) Min 61
CCR, % Max 0.700
Water content, % wt. Max 0.10
Neutralization number, mg KOH/1g Max 0.100
b) Slop wax is a product of petroleum distillate oil cuts dewaxing. It is a blend of solid paraffin hy-
drocarbons, having irregular fraction composition with 5% to 20% of petroleum oil depending on
grade. It is used for solid paraffins manufacturing and in other petroleum refining and petrochemical
processes.
Quality indicators.
Product name, grade,
type, sort
Appearance Oil content,
%
Melting
point, °С
Sulfur con-
tent, % Closed-cup
flash-point, °С (M/P)
Mechanical
impurities content,
% wt.
Water content
Slop wax, grade 1 conforms Max
5.00
Min
49.0
Max
0.50
Min
180
Max
0.100
range
0.0000…0.0300
Slop wax, grade 2 conforms range
5.10…10.00 Min 49.0
Max 0.50
Min 180
Max 0.100
range 0.0000…0.0300
Slop wax, grade 3 conforms range
10.10…15.00
Min
49.0
Max
0.50
Min
180
Max
0.100
range
0.0000…0.0300
Slop wax, grade 4 conforms range
15.10…20.00
Min
49.0
Max
0.50
Min
180
Max
0.100
range
0.0000…0.0300
c) Commercial deasphalted oil is a product of black oil deasphalting with liquid propane. It is used in
manufacturing of residual lube oils and as feedstock for catalytic cracking and hydrocracking.
Product name, grade, type, sort Commercial deasphalted oil
Parameter Standard
Kinematic viscosity at 100°С, mm2/s range 17.00…35.00
Sulfur content, % wt. Max 2.200
Open-cup flash-point, °С Min 220
Pour point, °С Max 65
CCR, % Max 1.500
Color by CNT colorimeter Max 8.0
34
Product name, grade, type, sort Commercial deasphalted oil
Parameter Standard
Ash, % Max 0.010
Water content Max 0.0300
d) Kerosene oil.
Lamp oil grade KO-20 is a kerosene cuts blend. It is used as solvent in films and varnishes manufac-
turing, for leathers impregnation, removal of rust-preventing coating layers and in oil lamps and in-
candescent lamps, as well as fuel for metal cutters and household heaters.
Industrial eco-friendly kerosene oil is a product of straight-run kerosene cut hydrogenation. It is used
as feedstock for pyrolytic production of ethylene, propylene and aromatic hydrocarbons, as fuel for
glassware and chinaware firing, as solvent for machines and their components washing.
Quality indicators.
Product name, grade, type, sort Lamp oil grade KO-20 Industrial eco-friendly
kerosene oil
Parameter Standard Standard
Initial boiling point, °С Min 140
Distillated below 270°С, % Min 80 Min 80
50% boils out at t, °С Max 205
98% boils out at t, °С Max 310 Max 310
Smoke point, mm Min 20
Closed-cup flash-point, °С (M/P) Min 40 Min 40
Kinematic viscosity at 20°С, mm2/s Min 1.200
Cloud point, °С Max -12
Sulfur content, % wt. Max 0.100 Max 0.001
Copper strip corrosion passed passed
Acidity, mg KOH/100cm3 Max 1.30
Ash, % Max 0.005 Max 0.005
Color by KNS colorimeter Max 15
Water-soluble acids and alkali contents none none
Mechanical impurities and water content none none
Density at 15°С, kg/m3 Max 834.0 Max 834.0
35
e) Petrolatum is a product of dewaxing of solvent-refined residual petroleum oils. It is a blend of sol-
id paraffin, ceresin and 7% to 38% petroleum oils. It is used as feedstock for ceresin production, as
component of lubricants and electric insulation compounds, as antiozonant for rubber.
Product name, grade, type, sort Petrolatum grade PS-55 Petrolatum grade PS-60
Parameter Standard Standard
Color conforms conforms
Drop point, °С range 55…60 range 60…65
Corrosion test passed passed
Neutralization number, mg KOH/1g Max 0.050 Max 0.050
Water-soluble acids and alkali contents none none
Mechanical impurities content, % Max 0.0300 Max 0.0300
Sulfur content, % Max 0.60 Max 0.60
Phenol content none none
Open-cup flash-point, °С Min 240 Min 240
Penetration at 25°С in residue, % Max 70 Max 70
Water content Max 0.0300 Max 0.0300
f) Hydrocracked residue is a hydrotreated blend of higher-boiling compounds with low sulfur and
heavy metals content, obtained as a result of vacuum distillates hydrocracking under hydrogen pres-
sure. It is used as feedstock for catalytic thermal processes, petroleum oil production process, or as a
heavy fuel oil component.
Product name, grade, type, sort Hydrocracking residue
Parameter Standard
5% boils out at t, °С Max 370
10% boils out at t, °С Max 400
50% boils out at t, °С Max 440
90% boils out at t, °С Max 510
95% boils out at t, °С Max 530
Density at 15°С, kg/m3 Max 915.0
Sulfur content, % Max 0.10
Open-cup flash-point, °С Min 170
Flow point, °С Min 20
CCR, % Max 0.200
g) Feedstock for petroleum bitumens production is a blend of vacuum residues. It is used in bitumens
production by oxidation or compounding.
Product name, grade, type, sort
Feedstock for petroleum bitumens production
Grade 1 Grade 2 Grade 3
Parameter Standard Standard Standard
Reference viscosity at 80°С, s range 20…60 range 61…120 range 121…200
Open-cup flash-point, °С Min 200 Min 230 Min 260
Softening point, °С Min 20.0 Min 25.0 Min 30.0
Density at 20°С, kg/m3 Min 970.0 Min 980.0 Min 990.0
Water content Max 0.0300 Max 0.0300 Max 0.0300
h) Wide fraction of light hydrocarbons is a blend of liquefied petroleum gases and heavier hydrocar-
bons (C2-C6 and higher), produced while processing of associated petroleum gas, petroleum and gas
condensate. It is a feedstock for individual hydrocarbons production: С3, С4, i-C4, С5, i-С5, С5+, as
well as a feedstock for pyrolysis.
36
Product name, grade, type, sort
Wide fraction of light hydrocarbons
Grade A Grade B
Parameter Standard Standard
Sum of hydrocarbons С1+С2, % wt. Max 3.00 Max 5.00
С3 content, % wt. Min 15.00
Sum of hydrocarbons С4+С5, % wt. Min 45.00 Min 40.00
С6 and higher content, % wt. Max 15.00 Max 30.00
Hydrogen sulfide and mercaptan sulfur content, % wt. Max 0.025 Max 0.050
Hydrogen sulfide content, % wt. Max 0.00300 Max 0.00300
Free water and alkali content none none
Appearance conforms conforms
i) Petroleum extract is a product of oil cuts solvent refining with phenol. It is used for melting roofing
paper production, as carbon-containing additive for blends formation in foundry engineering, as
packing glands impregnating compound, in lithol and lubricant grease production.
Product name, grade, type, sort Petroleum extract
Parameter Standard
Density at 20°С, kg/m3 range 960.0…990.0
Kinematic viscosity at 100°С, mm2/s range 10.00…15.00
Refraction index at 50°С Min 1.5300
Open-cup flash-point, °С Min 210
Phenol content, % Max 0.01
Water content Max 0.0300
j) Raw pyrolysis gasolines are straight-run gasoline cuts and catalytic reforming raffinate, used as
feedstock for pyrolysis process.
Product name, grade, type, sort
Raw pyrolysis gasolines
Grade A Grade B
Parameter Standard Standard
Density at 20°С, g/cm3 Max 0.7250
Initial boiling point, °С Min 35 Min 35
10% boils out at t, °С Max 75
50% boils out at t, °С Max 105 Max 115
90% boils out at t, °С Max 150
Final boiling point, °С Max 170 Max 180
Aromatic hydrocarbons content, % wt. Max 7.0 Max 10.0
Naphtenic hydrocarbons content, % wt. Max 35.00
Saturated hydrocarbons content, % wt. Min 55.0000
Iodine number, g I/100 g Max 1.00 Max 2.00
Sulfur content, % wt. Max 0.050 Max 0.100
Copper strip corrosion test passed passed
Mechanical impurities and water content none none
Water-soluble alkali contents none none
Existing gums concentration, mg/100 cm3 Max 2.0
Saturated vapor pressure, kPa Max 62.0 Max 62.0