ftsystem.com
LEAK DETECTION
MAIN FUNCTIONS
Vacuum/PressureControl
Ideal to ensure product compliance with the quality standards checking vacuum presence or correct internal pressure in closed containers.
Feasibility and accuracy of the system indicated in the FT System’s official Technological Warranties
The technology, the structure and type of control used will vary according to the type of container and closure
FEATURESAcoustic or inductive technologyNo change to the existing line for installationIndependent structure for eliminating noise and vibration and ensuringmaximum accuracy and minimum maintenanceDesigned to be integrated with additional inspections Minimum/maximum level control Label presence Monitoring
STANDARD INSPECTION[depending to the configurations]
ADVANTAGESIMPROVE PRODUCTIVITY Reduction of the number of rejects in case of malfunctioning of the capper through the control on consecutive rejectsIMPROVE QUALITY Eliminate customer complaints related to pressure leak Eliminate customer complaints related to product deterioration for vacuum leak Ensureproduct quality
TYPE OF CONTAINERCrown cap, twist-off cap, cans(In association with the correct sensors configuration)
14
VACUUM PRESENCE CHECKPRESSURE PRESENCE CHECKCONTROL OF CORRECT PRESSURE
Signal of the AS system (600 series interface)
AS control head – Sonar system
PX sensor - Proximity
PX sensor - Proximity
Signal of the PX system (700 series interface)
Principle – Sonar system
Principle PX – Vacuum control on Twist-off cap
Principle PX – On Cans
VP600-AS / VP600-PX
LeakControl
Ideal to ensure the compliance with the quality standards by checking the tightness of the containers filled and closed through the correlation between a non-destructive compression module and pressure measure, combined with the level control. This patented system allows to ensure the the elimination of false rejects and the maximum control precision.
Feasibility and accuracy of the system indicated in the FT System’s official Technological Warranties
15
MAIN FUNCTIONSThe configuration of the leak detection system varies according to the material and the shape of the container and the type of the product contained inside
ADVANTAGESIMPROVE PRODUCTIVITY Reduction of the number of rejects in case of leak through the control on consecutive rejectsIMPROVE QUALITY Eliminate customer complaints related to product leak Eliminate customer complaints related to product deterioration for incorrect tightness Ensureproduct quality
TYPE OF CONTAINERAll types of flexible containers(In association with the correct sensors configuration)
FEATURESAnalog inductive sensor technology for measuring the pressureHigh frequency or X-ray technology for measuring the fill levelMechanical equipment located in a separate upper area of the machine to permit system to be washed down and allow easier access to partsDesigned to be integrated with additional inspections Label presence Monitoring
STANDARD INSPECTION[depending to the configurations]
CLOSURE TIGHTNESSMICROHOLES ON BOTTLE NECK AREAUNDER/OVER PRESSURE
Acquired signal (600 series)
Fill level inspection at machine infeed
Belts for compression
Pressure measure
Acquired signal (700 series)
Phase 1
Phase 2
Phase 3
TB1000
MAIN FUNCTIONS
Pressure controlon opaque containers
Ideal to ensure the compliance with the quality stan-dards by checking the tightness of the containers filled and closed through the correlation between a non-de-structive pressure measure module, combined with the level control. This patented system allows to ensure the elimination of false rejects and the maximum precision in pressure control inside compressible containers.
Feasibility and accuracy of the system indicated in the FT System’s official Technological Warranties
The configuration of the leak detection system varies according to the material and the shape of the contai-ner and the type of the product contained inside
FEATURESAnalog inductive sensor technology for measuring the pressureHigh frequency or X-ray technology for measuring the fill levelDesigned to be integrated with additional inspections Label presence Monitoring
STANDARD INSPECTION[depending to the configurations]
ADVANTAGESIMPROVE PRODUCTIVITY Reduction of the number of rejects in case of leak through the control on consecutive rejectsIMPROVE QUALITY Eliminate customer complaints related to product leak No change to the existing line for installation Eliminate customer complaints related to absence of internal pressure Eliminate customer complaints related to excessive internal pressure Ensureproduct quality
TYPE OF CONTAINERAll types of containers at least slightly flexible(In association with the correct sensors configuration)
18
CORRECT INTERNAL PRESSURECLOSURE TIGHTNESSABSENCE OF LEAK
Acquired signal (600 series)
Fill level inspection (X-ray or HF technology)
Dynamic guides for products positioning
Preassure measurement
Acquired signal (700 series)
Phase 1
Phase 2
Phase 3
TB5000
BLOWMOLDER LABELLER
ShrinkwrapperBundel Boxing
FILLER CAPPER
Preform
Monitoring
Cap Quality (QT)
Fill level
Capping
Leak Ctrl.[Squeezer]
Ejector
Diverter
QCS
LabellingCodingCheckweigher
Shape
OrganicResidure
PCS700Leak DetectionPressure/Vacuum[Laser spectroscopy forpressure measurement in line]
Blown bottle
FILLER CAPPER
Monitoring Fill level
Capping
Leak/Pressure[Acoustic/Sound]
LabellingCodingCheckweigher
Shape
Cap Quality (QT)
DiverterEmpty bottle
PASTEURIZER
LABELLERShrinkwrapperBundel, Boxing
WASHER
Ejector
PCS700Leak Detection
Pressure/Vacuum[Laser spectroscopy for
pressure measurement in line]
Ejector
Coding
Fill level Pressure Ctrl.
FILLER SEAMER PASTEURIZER
Checkweigher
ShrinkwrapperBundel Boxing
Monitoring
Empty Cans
Diverter
Ceckweigherfor single product
FOR YOUR... PLASTIC LINE
FOR YOUR... GLASS LINE
FOR YOUR... CANS LINE
FOR YOUR... LABORATORYCO2Content analysis
O2Content analysis
CO2 + O2 Content analysis
FT SYSTEM HAS A COMPLETE RANGE OF CONTROL AND INSPECTION SYSTEMSin order to ensure the high quality of your product allowing the optimization of your production reducing costs
WE HAVEYOUR SOLUTION
3
CONTROL & INSPECTION FOR YOUR BOTTLING AND PACKAGING LINE
Via Leonardo Da Vinvi 11729010 - Alseno (PC) - ITALYwww.ftsystem.com
Ph +39 0523 94 57 45Fax +39 0523 94 97 77Email [email protected]
FT SYSTEMFounded in 1998, FT SYSTEM has specialised in the design and production of quality control monito-ring systems along the entire bottling and packa-ging line.From the inspection of empty containers and caps to the fill levels, from the accurate capping to the leakage detection, from measuring the internal pressure of the container to the weight control, the label checking to laboratory analy-sis, FT SYSTEM guarantees the quality of your packaging products by optimising production and cost reduction.
INTEGRATED AND TOTALQUALITY SOLUTIONSThe simple and intuitive multiple inspection stations along the entire packaging process can also be integrated into a single control panel for a total overview of the quality and production performance.
CONSTANT RESEARCHThe heart of FT SYSTEM is its R & D team, assisted by a developed network of partnerships with universities and international research centers, dedicated to the most innovative and non-destructive inspection technologies: high frequency, X-ray, infrared, optical, laser, artificial acoustic and visual analysis.
GAS SENSINGL PRO-GAS SENSING is a FT SYSTEM patented technology dedicated to laser spectroscopy.A revolutionary and innovative method, which has enabled the design and the realization of nondestructive instruments of analysis and measurement of gas inside closed containers. The main fields of application of L PRO technology are the bottling of wine, beer, water and soft drinks and even the wider industry and pharmaceutical industry.
1
ftsystem.com
ESPAÑA
USACANADA
EUROPE
MEXICOCENTRAL AMERICA
BRAZILSOUTH AMERICA
AFRICAINDIA
CHINA
ITALYFRANCE
DEUTSCHLAND
AROL GROUP WORLD WIDE
UniMac GHERRI HEADQUARTERStr. per Barco, 4/G42027 MONTECCHIO EMILIA - ITALY
FT SYSTEM HEADQUARTERVia L. Da Vinci, 11729010 ALSENO - ITALY
USA, CANADAAROLBUFORD [GEORGIA U.S.A.]
FT SYSTEMPEMBROKE [MASSACHUSETTS - U.S.A.]
MEXICO,CENTRAL AMERICAAROL GROUPCUAJIMALPA
DEUTSCHLANDAROL GROUPVIERNHEIM
CHINAAROL GROUP SHANGHAI
FRANCEAROLBÉZIERSFT SYSTEMCHALLES LES EAUX
INDIAAROL GROUP PUNE, MAHARASHTRA
ESPAÑAAROLBARCELONAFT SYSTEMBARCELONA
UK, IRELANDAROL GROUPHALSTEAD [U.K.]
AFRICAAROL GROUPBÉZIERS [FR]
BRAZIL,SOUTH AMERICAAROL GROUPLAPA, SAN PAOLO
UK, IRELAND
L-PRO HEADQUARTERVia del lavoro, 1/336043 CAMISANO VICENTINO - ITALY
arol.comlpro.it
unimac-gherri.com
AROL HEADQUARTERViale Italia, 19314053 CANELLI - ITALY