Edition 04.2015Ref. No. 8111.227
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER EVENT SYSTEMSCATALOGUE
EN_PL_Event_2015.indd 1 10.03.2015 08:06:11
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
2
Layher
ead arter in i en ac
Plant 2 in Gueglingen
HERE IS THE BEATING HEART OF LAYHER.
Quality made by Layher comes from Gueglingen-Eibensbach. Our company
has set down deep local roots since it was established. Right up until today,
development, production, logistics and management are all in one place, where
the conditions are best for achieving quality made by Layher: in Gueglingen-
Eibensbach. The two locations together cover a surface area of 318,000 m².
This includes more than 142,000 m² of covered production and storage areas.
This is where our scaffolding systems are created by highly automated
production. Short distances and short reaction times mean we can adapt
production to suit our customers re uirements, flexibly and at any time.
MORE POSSIBILITIES. THE SCAFFOLDING SYSTEM.
This brand promise made by ayher is the expression of a brand philosophy that
we ve been living by for over 70 years. ore speed, more safety, more proximity,
more simplicity and more future: values with which we strengthen our customers’
competitiveness in the long term. With our innovative systems and solutions,
we’re working all the time on making scaffolding construction even simpler, even
more economical and, above all, even safer. With comprehensive services, a
permanent range of training courses and an ethos of customer focus, more than
1,500 dedicated Layher employees are creating more possibilities for our
customers every single day. In more than 30 countries all over the world.
QUALITY MADE BY LAYHER
EN_PL_Event_2015.indd 2 10.03.2015 08:06:18
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
3
MORE SPEEDWe can supply any required quantity of the right products at the right time – to anywhere in
the world. ayher has subsidiaries in more than 30 countries in all five continents, with a
tight-knit network of national service centers. Speed is also the motto of our logistics
concept. Customers have the choice of picking up their material at a Layher service center or
having it delivered either to a warehouse or “just in time” directly to the site.
MORE EXPERIENCETradition has grown into experience and expertise. ur experts pass on this knowledge all
over the world. Existing customers might want to try a different approach, while new
customers might need support when assembling a Layher scaffolding structure. Layher’s
specialists get to grips with the specific tasks and re uirements, devising for our customers
persuasive solutions that are both profitable and efficient. ood advice from ayher is
guaranteed. We take care of our customers at every level, because cooperation with them on
the basis of mutual trust as well as their success are important to us.
MORE KNOWLEDGEFurther training is the key to success. For this reason, Layher organizes regular training
seminars that prepare our customers for current and future challenges specifically in
scaffolding. This training scheme is backed up by many others options, for example practical
product training courses and regular meetings for scaffolding erectors to promote the flow of
information between experts and colleagues. And last but not least, ayher offers
comprehensive publications on all topics to do with scaffolding construction.
MORE CLARITYaving time, using material in the best way, improving logistics. All that can be done with
ayher s planning software, ayP A , or the special ayher tools for Auto A . ayher
software means greater reliability when budgeting and planning scaffolding construction
projects. Optimization of inventory management and complete cost transparency for the
material used in a project. Once the dimensions and the required assembly variant have been
entered, the Layher software supplies a scaffolding proposal with matching material list
within seconds.
MORE QUALITYPeople talk a lot about quality. We just produce it. Quality from Layher means state-of-the-art
production processes, carefully selected materials, smart automation and a highly ualified
workforce. ur products comply with the very latest security standards and possess I I
certification, erman T approval, and many other erman and international uality labels.
20,000 kilometres of steel tubing in high-quality workmanship are convincing testimony to
Layher’s quality standards.
More Possibilities. The Scaffolding System.
EN_PL_Event_2015.indd 3 10.03.2015 08:06:33
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
4
Contents
2 Truss systems Page 24
2 Leg insert platforms Page 16
2 Event stages Page 8
LAYHER EVENT SYSTEMS
2 Event stages Page 8
2 Benches, bucket seats, tip-up seats Page 22
Speedyscaf System
ef. o. 8102.256
Allround Scaffolding System
ef. o. 8116.252
Scaffolding Accessories
ef. o. 8103.254
Protective Systems
ef. o. 8121.253
Event Systems
ef. o. 8111.227
Rolling Towers Ladders and Stairs
ef. o. 8118.225
LAYHER SPEEDYSCAF SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8102.256
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8116.252
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
Edition 04.2015Ref. No. 8111.227
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER EVENT SYSTEMSCATALOGUE
LAYHER PROTECTIVE SYSTEMSCATALOGUE
Edition 04.2015Ref. No. 8121.253
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER SCAFFOLDING ACCESSORIESCATALOGUE
Edition 04.2015e o
Quality management certified accordingto by German TÜV-CERT
Rolling Towers
LAYHER LADDERS & STAIRSLAYHER ROLLING TOWERS
CATALOGUE
Edition 04.2015Ref. No. 8118.225
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
T E A E P T A E A ATA E AT A A E
2 Leg insert platforms Page 16
EN_PL_Event_2015.indd 4 10.03.2015 08:06:42
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
5
2 Event stands Page 18
2 FOH system Page 32
CONTENTS2 EVENT SYSTEMS
2 E I I - A I AI 6
2 EVENT STAGES AND PODIA 8
2 A I P E T 10
2 A AI A TAI A 12
2 I E A A E 14
2 E I E T P AT 16
2 EVENT STANDS 18
2 A I P E T A A AI 20
2 E E A ET EAT 22
2 TRUSS SYSTEMS 24
2 A T TE 26
2 TEE T TE 30
2 FOH TOWER KIT SYSTEM 32
2 TE 34
2 A A A I 34
2 INDEX 36
All dimensions and weights are guideline values. ubject to technical modification.
teel parts are galvanized according to E I 4042 and E 12811-2.
ur deliveries shall be made exclusively in accordance with our currently valid eneral Terms of Sale. These include the following provisions: The place of performance is Gueglingen-Eibensbach. Title to the delivered goods shall be retained until full payment has been made.
Please re uest the specific instructions for assembly and use when ordering. Protected by copyright. ot to be reproduced, either in whole or in part. isprints and errors excepted.
Rolling Towers Ladders and Stairs
ef. o. 8118.225
EN_PL_Event_2015.indd 5 10.03.2015 08:06:42
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
6
Event Systems
LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8116.252
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
Module EV 86 EV 86 EV 86Q EV 100Metric*
EV 104
Bay 2.07 x 2.57 m 2.07 x 2.57 m 2.57 x 2.57 m 2.00 x 2.00 m 2.07 x 2.07 m
eck type Event deck Event deck Event deck Event deck Event deck
eck size 0.86 x 2.07 m 0.86 x 2.07 m 0.86 x 2.57 m 1.00 x 2.00 m 1.04 x 2.07 m
ecks per bay 3 3 3 2 2
Support element Event transom Event transom Event transom Event transom Event transom
Support element length 2.57 m 2.57 m 2.57 m 2.00 m 2.07 m
Crosspiece support – required – – –
Perm. load capacity 5.0 k /m² 7.5 k /m² 5.0 k /m² 7.5 k /m² 7.5 k /m²
LAYHER STAGES Layher stages are just as suitable for use inside halls and marquees as use out -
doors. The components make up a construction kit allowing the building of a
small podium for fashion shows or bands, or a giant concert stage. All parts
are weatherproof, thanks to the use of aluminium, hot-dip galvanized steel and
coated plywood panels. On uneven surfaces, fast and easy adaptability of the
Allround stage to the lie of the land is a particular advantage. The permissible
loading capacity of the podium surface is up to 7.5 k /m². The height can,
depending on the structural strength, be up to 10 m. Meeting of the guidelines
for temporary structures with the design loads as per I 4112 is verified by
inspection books issued by the competent authority.
DECISION-MAKING AIDS
LAYHER STAGE AND STAND SYSTEMS
* Further metric components, see catalogue Allround Scaffolding.
EN_PL_Event_2015.indd 6 10.03.2015 08:06:44
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
7
Seating stand EV 86 16 EV 86 25 EV 86 33 EV 100 25Metric*
EV 104 25
Step width 0.857 m 0.857 m 0.857 m 1.00 m 1.036 m
Step height 0.166 m 0.25 m 0.333 m 0.25 m 0.25 m
iser angle egree 11° 16.3° 21.1° 14° 13.6°
iser angle 19.4 29.2 38.6 24.9 24.2
Standard dimension 2.57 x 2.07 m 2.57 x 2.07 m 2.57 x 2.07 m 2.00 x 2.00 m 2.07 x 2.07 m
Loose seating possible possible possible recommended recommended
Permanently fitted benches recommended recommended recommended possible possible
Seating stand EV 75 16 EV 75 25 EV 75 33
Step width 0.75 m 0.75 m 0.75 m
Step height 0.16 m 0.25 m 0.33 m
iser angle egree 12.5° 18.4° 24°
iser angle 22.2 % 33.3 % 44.4 %
Standard dimension 2.25 x 2.00 m 2.25 x 2.00 m 2.25 x 2.00 m
Loose seating not possible not possible not possible
Permanently fitted benches possible possible possible
Bucket seats not possible not possible not possible
Tip-up seats recommended recommended recommended
LAYHER STANDSThe most important characteristics of Layher seating stands are: sturdy
material, sound workmanship, long service life, rapid assembly at changing
locations, and low transport volume. The individual parts are easy to assemble
and lightweight, so that they can be installed manually. Please refer to our
tables in this connection. Thanks to the modular design, it is possible to adapt
the stand to the local conditions and to plan it in accordance with German
regulations governing public assembly places.
DECISION-MAKING AIDS
EN_PL_Event_2015.indd 7 10.03.2015 08:06:52
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
8
Event stages and podia
LAYHER STAGES AND PODIA – EASIER, QUICKER AND SAFER BY USING THE MODULAR LAYHER SYSTEM
o restrictions imposed on performances, no limits set in the dimensions
and fittings, no concessions made to the location
Layher podiums and stages always provide a safe play performance
area that s exactly what s needed. eries manufacture and high delivery
readiness are our way to help you cut costs and achieve economic
success; and tailor-made special solutions whenever necessary are our
strengths.
LAYHER EVENT STAGES AND PODIA
2 Basic unit
an be expanded as re uired, variable floor plans.
2 E panda le
Caters for requirements with a variety of roof and support systems.
2 Allround base
High load-bearing capacity, rapid assembly and dismantling.
2 Practically-minded design
Strong connector technology, ergonomic handling, low-wear
aluminium parts, corrosion-proof thanks to hot-dip galvanisation,
space-saving storage.
T E E E IT T
EN_PL_Event_2015.indd 8 10.03.2015 08:06:56
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
9
LAYHER STAGES AND PODIA – EASIER, QUICKER AND SAFER BY USING THE MODULAR LAYHER SYSTEM
EN_PL_Event_2015.indd 9 10.03.2015 08:07:03
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
10
Event stages – basic components
Event stages – basic components Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 1 Event deck T10Aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 20.86 x 2.57 32.3 10 5402.191 W 2
2 2 Event deck T10, square for equalizing bays,aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 1.00 14.3 10 5402.175 W 21.04 x 1.04 19.3 10 5402.185 W 2
3 3 Plastic corneras spare part for Event deck T10 (Pos. 1 and 2)
3.4 50 V 6494.101 W 2 2 2 2
4 4 Event transom 0.86 6.1 60 5400.072 W 21.00 6.4 60 5400.010 W 21.04 6.6 60 5400.020 W 21.71 10.0 60 5400.071 W 2
5 2.00 11.4 60 5400.040 W 22.07 12.0 60 5400.050 W 22.57 14.6 60 5400.070 W 2 2
6 7 5 Transom supportincreases permissible load on the E 86 system
2.57 x 0.50 21.2 40 5400.100 W 2
6 Tension clasp for transom 0.16 0.1 50 V 5403.514 W 2 2 2 2
8 9 10 7 Square half-coupler 1.4 5403.510 W 2 2 2 2
8 Base plate 20max. spindle travel 10 cm
0.20 2.3 200 5602.020 W 2 2 2 2
11
9 Base plate 40max. spindle travel 25 cm
0.40 2.9 200 4001.040 W 2 2 2 2
12 13 14 10 Base plate 60, solid, without lockmax. spindle travel 41 cm
0.60 6.7 200 5602.060 W 2 2 2 2
11 Rubber pad for base platefor slip-reduction on solid grounds like concrete, asphalt, stone or timber. Protects sensitive deckings from damages.
0.20 x 0.20 0.4 4000.500 W 2 2 2 2
12 Base collar, short 0.17 1.1 250 5601.000 W 2 2 2 2
13 Standard, 0.67 m, with 2 rosettes, without spigotwith integrated base collar
0.67 3.6 200 2604.066 W 2 2 2 2
14 Standard, 1.17 m, with 3 rosettes, without spigotwith integrated base collar
1.17 6.1 28 2604.116 W 2 2 2 2
LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8116.252
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
6
14For further base plates, see
caffolding Accessories atalogue
or all further Allround components, see Allround caffolding ystem atalogue
The Event decks 1 and 2 up to 2.07 m in length are desi-gned for a load of 7.5 k /m². The Event deck 2.57 m without transom support can bear 5 k /m². The removable Plastic corners 3 ensure that the vertical tubes can pass through. The coated plywood board is braced with alu minium rungs. The 18 cm high Event transom 4 of aluminium section with connecting wedge heads of galvanised steel holds the Event decks. The load-bearing capacity of the 2.57 m long Event crosspiece can be increased by reinforcement with the Transom support 5 from 5 k /m² to 7.5 k /m².
The Tension clasp 6 of spring steel connects the Event deck to the Event transom and acts as a lock against lift-off.
A gap-free podium surface is assured by the Square half-coupler 7 to be fitted to the edge of the podium to prevent shifting.
The rubber pad 11 must not be used as load-distributing base. It minimizes slippery of the structure.
The Standard 0.67 m 13 and Standard 1.17 m 14 are used for podiums with heights of 0.80 m or 1.30 m and obviate the need for the base collar. The assembly runs faster and ballasting can be placed on the lowest scaffolding level.
With the Base plate 20 8 and the Base collars 12 very small heights, as encountered in trade fair and hall construction can be achieved. The Base plate 40 9 and the Base plate 60, solid 10 are used especially in stand construction and permit increased height adjustment.
The substructure of the Layher Event systems is created from Layher Allround scaffolding. Please refer to the Allround Scaffolding System Catalogue for the components required.
Event deck
Tension clasp
Event transom
EN_PL_Event_2015.indd 10 10.03.2015 08:07:10
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
11
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Event stages – basic components Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 1 Event deck T10Aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 20.86 x 2.57 32.3 10 5402.191 W 2
2 2 Event deck T10, square for equalizing bays,aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 1.00 14.3 10 5402.175 W 21.04 x 1.04 19.3 10 5402.185 W 2
3 3 Plastic corneras spare part for Event deck T10 (Pos. 1 and 2)
3.4 50 V 6494.101 W 2 2 2 2
4 4 Event transom 0.86 6.1 60 5400.072 W 21.00 6.4 60 5400.010 W 21.04 6.6 60 5400.020 W 21.71 10.0 60 5400.071 W 2
5 2.00 11.4 60 5400.040 W 22.07 12.0 60 5400.050 W 22.57 14.6 60 5400.070 W 2 2
6 7 5 Transom supportincreases permissible load on the E 86 system
2.57 x 0.50 21.2 40 5400.100 W 2
6 Tension clasp for transom 0.16 0.1 50 V 5403.514 W 2 2 2 2
8 9 10 7 Square half-coupler 1.4 5403.510 W 2 2 2 2
8 Base plate 20max. spindle travel 10 cm
0.20 2.3 200 5602.020 W 2 2 2 2
11
9 Base plate 40max. spindle travel 25 cm
0.40 2.9 200 4001.040 W 2 2 2 2
12 13 14 10 Base plate 60, solid, without lockmax. spindle travel 41 cm
0.60 6.7 200 5602.060 W 2 2 2 2
11 Rubber pad for base platefor slip-reduction on solid grounds like concrete, asphalt, stone or timber. Protects sensitive deckings from damages.
0.20 x 0.20 0.4 4000.500 W 2 2 2 2
12 Base collar, short 0.17 1.1 250 5601.000 W 2 2 2 2
13 Standard, 0.67 m, with 2 rosettes, without spigotwith integrated base collar
0.67 3.6 200 2604.066 W 2 2 2 2
14 Standard, 1.17 m, with 3 rosettes, without spigotwith integrated base collar
1.17 6.1 28 2604.116 W 2 2 2 2
EN_PL_Event_2015.indd 11 10.03.2015 08:07:10
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
12
Event systems – guardrails and stairways for stages
Event systems – guardrails and stairways for stages Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 4 5 1 Guardrail post for podium 1.64 13.8 100 5406.000 W 2 2 2 2
2 Handrail T13handrail height 1.00 m
1.00 7.9 40 5417.100 P 21.04 8.1 40 5417.104 P 22.00 15.0 40 5417.200 P 22.07 15.4 40 5417.207 W 2 22.57 18.7 40 5417.257 P 2 2
3 Guardrail with child safety feature T12Guardrail height 1.10 m.Connection elements height adjustable for use with Event or scaffolding decks.
1.00 19.8 25 5409.100 W 21.04 20.0 25 5409.104 W 21.57 25.8 25 5409.157 W 22.00 30.5 25 5409.200 W 22.07 30.8 25 5409.207 W 2 22.57 35.8 25 5409.257 W 2 2
2 3 4 Stairway guardrail 750 with child safety featurefor stairway stringer Pos. 5
1.00 x 1.57 22.0 25 2616.106 W 2 2 2 2
5 U-Stairway stringer 750 with half-couplerwith 5 steps
1.00 x 1.57 28.0 40 2638.003 W 2 2 2 2
6 Stringer for modular stairway 1-step 0.30 2.4 50 5407.001 W 2 2 2 22-step 0.60 5.5 50 5407.002 W 2 2 2 23-step 0.90 8.0 20 5407.003 W 2 2 2 2
7 Guardrail for modular stairway 1-step 0.30 x 1.10 6.5 40 5407.011 W 2 2 2 22-step 0.60 x 1.10 14.0 25 5407.012 W 2 2 2 23-step 0.90 x 1.10 16.0 25 5407.013 W 2 2 2 2
8 Base collar for modular stairway, 0.26 mwith spigot
0.26 2.0 450 5407.021 W 2 2 2 2
9 Standard for modular stairway, 0.59 mwith spigot
0.59 3.1 250 5407.022 W 2 2 2 2
10 O-ledger LW, 0.90 m 0.90 3.4 50 2601.090 W 2 2 2 2
11 Lift-off preventer, with bolt 0.29 0.4 300 5407.030 W 2 2 2 2
LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8116.252
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
Riser s = 16.00 cmTread a = 31.80 cm
ndercut u 0.20 cm
Side protection of the stage is provided by Handrails 2 or Guardrails with child safety features 3. The stairway stringer 5 fits exactly to the height of the Event decks. Thus it is always as top step. epending on the podium height, the stairway can be extended with different stairway stringers.
6
7
8
911
10
Notice: In combination of different stairway stringers, the different stairway dimension must be pointed out. For further information, please see catalogue Allround Scaffolding..
odi eig t Stairway: 2638.003 + 2638.008
odi eig t Stairway: 2638.003 + 2638.005
odi eig t Stairway: 2638.003 + 2638.002
odi eig t Stairway: 2638.003
The artist entry to the stage is via the modular stairway. The construction kit comprises: Stringer for modular stairway, 1, 2 and 3 steps 6, Base collar 0.26 m 8 and O-ledger 0.90 m 10. If required, stairway guardrails are attached. The bolts needed for guardrail assembly are included with every stairway guardrail. The guardrails are not suitable for public areas.
EN_PL_Event_2015.indd 12 10.03.2015 08:07:20
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
13
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Event systems – guardrails and stairways for stages Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 4 5 1 Guardrail post for podium 1.64 13.8 100 5406.000 W 2 2 2 2
2 Handrail T13handrail height 1.00 m
1.00 7.9 40 5417.100 P 21.04 8.1 40 5417.104 P 22.00 15.0 40 5417.200 P 22.07 15.4 40 5417.207 W 2 22.57 18.7 40 5417.257 P 2 2
3 Guardrail with child safety feature T12Guardrail height 1.10 m.Connection elements height adjustable for use with Event or scaffolding decks.
1.00 19.8 25 5409.100 W 21.04 20.0 25 5409.104 W 21.57 25.8 25 5409.157 W 22.00 30.5 25 5409.200 W 22.07 30.8 25 5409.207 W 2 22.57 35.8 25 5409.257 W 2 2
2 3 4 Stairway guardrail 750 with child safety featurefor stairway stringer Pos. 5
1.00 x 1.57 22.0 25 2616.106 W 2 2 2 2
5 U-Stairway stringer 750 with half-couplerwith 5 steps
1.00 x 1.57 28.0 40 2638.003 W 2 2 2 2
6 Stringer for modular stairway 1-step 0.30 2.4 50 5407.001 W 2 2 2 22-step 0.60 5.5 50 5407.002 W 2 2 2 23-step 0.90 8.0 20 5407.003 W 2 2 2 2
7 Guardrail for modular stairway 1-step 0.30 x 1.10 6.5 40 5407.011 W 2 2 2 22-step 0.60 x 1.10 14.0 25 5407.012 W 2 2 2 23-step 0.90 x 1.10 16.0 25 5407.013 W 2 2 2 2
8 Base collar for modular stairway, 0.26 mwith spigot
0.26 2.0 450 5407.021 W 2 2 2 2
9 Standard for modular stairway, 0.59 mwith spigot
0.59 3.1 250 5407.022 W 2 2 2 2
10 O-ledger LW, 0.90 m 0.90 3.4 50 2601.090 W 2 2 2 2
11 Lift-off preventer, with bolt 0.29 0.4 300 5407.030 W 2 2 2 2
For further stairways and access assemblies, see Allround Scaffolding System Catalogue.
EN_PL_Event_2015.indd 13 10.03.2015 08:07:20
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
14
Universal base Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 10
0EV
104
1 1 Base beam,steel, hot-dip galvanized
0.86 13.0 5431.086 P 21.00 15.5 5431.100 P 21.04 16.1 5431.104 P 22.00 32.5 5431.200 P 22.07 33.7 5431.207 P 2 2
2 2 Base lattice beamsteel, hot-dip galvanized
0.86 x 0.50 38.2 5432.086 P 21.00 x 0.50 38.5 5432.100 P 21.04 x 0.50 39.1 5432.104 P 22.00 x 0.50 76.0 5432.200 P 22.07 x 0.50 76.7 5432.207 P 2 2
3 3 Truss-Transomsteel, hot-dip galvanized
0.86 27.8 5433.086 P 21.00 28.9 5433.100 P 21.04 29.0 5433.104 P 22.00 47.3 5433.200 P 22.07 48.6 5433.207 P 2 2
4 4 Base plate type 1steel, hot-dip galvanized,for 30 and 40 support with 32 drillings
0.41 x 0.41 25.0 5434.003 P 2 2 2
5 5 Base plate type 2steel, hot-dip galvanized,for 30 and 40 supportwith 16 drillings
0.41 x 0.41 25.0 5434.002 P 2 2 2
6 6 Special bolt with nut 53 x 34
16 x 60 2.0 5434.012 W 2 2 2
Universal base
Since the release of the new guidelines for temporary structures (E 13814), the use of stage roofings ist not possible anymore without combining it with a podium of Layher.
With the universal base, you can connect roofs efficiently to the ayher podium. The speciality of this solution is, that it is possible to adjust almost every position of the supports contiuously.
If the base should be used for larger roofings, depending on the load bearing capacity, an additional support could be necessary.
2 ead weight of the podium, can be charged thus lower ballasting.
2 Forces, emitting by linkage, can be transmitted to the podium – thus lower ballasting.
2 igher headroom, thanks to fixation points on deck level.
2 Quick assembly of the podium with the universal base and our well-known Allround caffolding.
2 Topographic problems at the place of action, can be solved easily.
2 Complete system, with stairways, ramps and guardrails available.
EN_PL_Event_2015.indd 14 10.03.2015 08:07:24
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
15
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Universal base Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 10
0EV
104
1 1 Base beam,steel, hot-dip galvanized
0.86 13.0 5431.086 P 21.00 15.5 5431.100 P 21.04 16.1 5431.104 P 22.00 32.5 5431.200 P 22.07 33.7 5431.207 P 2 2
2 2 Base lattice beamsteel, hot-dip galvanized
0.86 x 0.50 38.2 5432.086 P 21.00 x 0.50 38.5 5432.100 P 21.04 x 0.50 39.1 5432.104 P 22.00 x 0.50 76.0 5432.200 P 22.07 x 0.50 76.7 5432.207 P 2 2
3 3 Truss-Transomsteel, hot-dip galvanized
0.86 27.8 5433.086 P 21.00 28.9 5433.100 P 21.04 29.0 5433.104 P 22.00 47.3 5433.200 P 22.07 48.6 5433.207 P 2 2
4 4 Base plate type 1steel, hot-dip galvanized,for 30 and 40 support with 32 drillings
0.41 x 0.41 25.0 5434.003 P 2 2 2
5 5 Base plate type 2steel, hot-dip galvanized,for 30 and 40 supportwith 16 drillings
0.41 x 0.41 25.0 5434.002 P 2 2 2
6 6 Special bolt with nut 53 x 34
16 x 60 2.0 5434.012 W 2 2 2
EN_PL_Event_2015.indd 15 10.03.2015 08:07:24
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
16
Event systems – leg insert platforms
Event systems – leg insert platforms Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
EV 86
EV 10
0EV
104
1 1 Event deck T10Aluminium frame. coated plywood , detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 2
2 2 Event deck T10, squarefor equalizing bays, aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 1.00 14.3 10 5402.175 W 2
1.04 x 1.04 19.3 10 5402.185 W 2
3 4 3 Clamp T10for coupling Event decks T7 / T10 (Pos. 1)
0.4 40 5403.506 W 2 2 2
4 Leg insert supportfor Event deck T10 (Pos. 1), incl. 4 screws, die-cast zinc, for holding Pos. 4
1.2 5402.010 W 2 2 2
5 5 Alu leg insert Q60 T13 with plastic slider
0.20 1.1 4 V 5415.021 P 2 2 2
0.40 2.2 4 V 5415.041 P 2 2 2
0.60 3.4 4 V 5415.061 P 2 2 2
0.80 4.5 4 V 5415.081 W 2 2 2
1.00 5.6 4 V 5415.101 W 2 2 2
7 6 Hinged foot for retrofit, with non-slip floor-protecting rubber underlay, Adjusting range 40 mm
0.3 6494.647 P 2 2 2
6 7 Insert leg connector, 2-wayfor aluminium insert legs Q60
1.1 5407.061 W 2 2 2
Leg insert supports 4 can be fitted into the corners of the T10 Event decks. These parts are fastened with two bolts, which are supplied. The insert leg holders are used to hold the Q60 aluminium legs 5. Insert leg connectors 7 are used to connect the insert legs to one another. Clamps 3 for Event decks connect the aluminium frames of the platforms to one another resulting in a smooth transition even under load.
The insert-leg kit is the ideal complement to the Layher Event System. This design is very economical for smaller platforms up to 1 m height. The assembly time and number of parts are lower than using an Allround support structure.
The permissible load of the platforms is 750 kg/m².Ideal for use in halls and rooms with sensitive floor coverings, thanks to the floor protecting and non-slip rubber pads, which are already integrated into the height-adjustable hinged feet 6.
EN_PL_Event_2015.indd 16 10.03.2015 11:50:17
PA
0101
7422
_Kat
_Eve
nt_E
N_K
OR
R16
PA
0101
7422
_Kat
_Eve
nt_E
N_K
OR
R16
PA01017422_Kat_Event_EN_KORR16.pdf
PA01017422_Kat_Event_EN_KORR16.pdf
17
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Event systems – leg insert platforms Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 10
0EV
104
1 1 Event deck T10Aluminium frame. coated plywood , detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 2
2 2 Event deck T10, squarefor equalizing bays, aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders
1.00 x 1.00 14.3 10 5402.175 W 2
1.04 x 1.04 19.3 10 5402.185 W 2
3 4 3 Clamp T10for coupling Event decks T7 / T10 (Pos. 1)
0.4 40 5403.506 W 2 2 2
4 Leg insert supportfor Event deck T10 (Pos. 1), incl. 4 screws, die-cast zinc, for holding Pos. 4
1.2 5402.010 W 2 2 2
5 5 Alu leg insert Q60 T13 with plastic slider
0.20 1.1 4 V 5415.021 P 2 2 2
0.40 2.2 4 V 5415.041 P 2 2 2
0.60 3.4 4 V 5415.061 P 2 2 2
0.80 4.5 4 V 5415.081 W 2 2 2
1.00 5.6 4 V 5415.101 W 2 2 2
7 6 Hinged foot for retrofit, with non-slip floor-protecting rubber underlay, Adjusting range 40 mm
0.3 6494.647 P 2 2 2
6 7 Insert leg connector, 2-wayfor aluminium insert legs Q60
1.1 5407.061 W 2 2 2
EN_PL_Event_2015.indd 17 10.03.2015 08:07:26
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
18
Event stands
FOR GETTING THE CROWD’S MONEY’S WORTH
o restrictions on comfort, no limits on dimensions and e uipment,
no concessions to the location ayher stands are always an excellent
“observation point”, just as required.
The Layher Event system: Stands for sitting and standing, all over the
world and meeting client requirements. Series manufacture and high
delivery readiness are our way to help you cut costs and achieve
economic success; and tailor-made special solutions whenever necessary
are our strengths.
The whole ayher Event- ystem bases on the proven Allround caffolding
System. Thus makes investions even more economical, because the
material can be used for lots of different kinds of use.
LAYHER EVENT STANDS
2 Standard solutions
Series material, rapid availability.
2 Substructure Allround
igh load-bearing capacity, rapid erection and dismantling, flexible
assembly, choice of accessories.
2 Handy components
Easy to transport and store, palletizable.
2 Special design
for individualized problem solutions.
T E E E IT T
EN_PL_Event_2015.indd 18 10.03.2015 08:07:34
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
19
EN_PL_Event_2015.indd 19 10.03.2015 08:07:42
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
20
Event stands – basic components and guardrails for stands
Event stands – basic components and guardrails for stands Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 2 1 Stand element1-step
1.00 x 0.25 6.6 40 5401.010 W 21.04 x 0.25 6.7 40 5401.020 W 2
2 Stand element2-step
1.71 x 0.33 10.5 30 5401.030 W 2 2
4 3 5 3 Intermediate step0.30 x 0.12 x , with 2 half coupler
L = 1.00 8.4 5402.110 P 2 2L = 1.25 10.5 5402.130 P 2 2
4 Guardrail standard, 0.96 mwith bottom mounted spigot and 2 cutaway rosettes
0.96 5.5 20 5405.045 W 2 2 2 2
6
5 Lift-off preventer for stand element
0.10 0.05 5403.501 W 2 2 2 2
7 6 Lift-off preventer for steel decks 0.86 1.6 5403.007 W 2 2
olt 10 70 with nut 3.5 50 V 5403.009 W 2 2
7 Steel deck support 0.10 0.4 5403.006 W 2 2
8 Side guardrail T122-step
2.00 x 1.10 32.2 25 5410.201 P 22.07 x 1.10 32.5 25 5410.204 W 2
9 Side guardrail T123-step
2.57 x 1.10 35.2 25 5410.301 P 2 2
10 Side end guardrail T122-step
2.00 x 1.10 30.4 25 5410.202 P 22.07 x 1.10 30.7 25 5410.206 W 2
11 Side end guardrail T123-step
2.57 x 1.10 34.3 25 5410.302 P 2 2
12 Corner guardrail, top Steel
1.10 x 0.28 11.2 40 5410.303 W 2 2 2 2
EV 86, 166 mmEV 100 EV 104, 250 mm
EV 100 EV 104
The Stand element, 1-step 1 with a standard rise of 250 mm is used for the Event systems E 100 and E 104.
The Stand element, 2-step 2 is used for the Event system E 86.
When Event decks are used, the Lock against lift-off 5 is required to prevent the Event decks from lifting off and tilting.
Alternatively, conventional steel decks can also be used, which is to be recommended especially for outdoor events. Here the ock against li t o T 86 6 and the Steel deck support 7 are used.
The Guardrail standard 0.96 m 4 with the bottom mounted spigot, is used to guide the Allround standards out of the substructure. For side guardrails, however, this standard must be additionally reinforced.
The components shown here are showcase. For the different stand variants, showing in table on page 7, further stand components are available. These are stand elements, intermediate steps, guardrails and guardrail posts for each type of stand.
Side guardrails and guardrail posts EV 100/EV 104, rise 250 mm
Guardrail posts are dependent on the stand system – upon request
11
12
9
10
12
8
ide guardrails and guardrail posts EV 86, rise 166 mm
EN_PL_Event_2015.indd 20 10.03.2015 08:07:47
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
21
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Event stands – basic components and guardrails for stands Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 2 1 Stand element1-step
1.00 x 0.25 6.6 40 5401.010 W 21.04 x 0.25 6.7 40 5401.020 W 2
2 Stand element2-step
1.71 x 0.33 10.5 30 5401.030 W 2 2
4 3 5 3 Intermediate step0.30 x 0.12 x , with 2 half coupler
L = 1.00 8.4 5402.110 P 2 2L = 1.25 10.5 5402.130 P 2 2
4 Guardrail standard, 0.96 mwith bottom mounted spigot and 2 cutaway rosettes
0.96 5.5 20 5405.045 W 2 2 2 2
6
5 Lift-off preventer for stand element
0.10 0.05 5403.501 W 2 2 2 2
7 6 Lift-off preventer for steel decks 0.86 1.6 5403.007 W 2 2
olt 10 70 with nut 3.5 50 V 5403.009 W 2 2
7 Steel deck support 0.10 0.4 5403.006 W 2 2
8 Side guardrail T122-step
2.00 x 1.10 32.2 25 5410.201 P 22.07 x 1.10 32.5 25 5410.204 W 2
9 Side guardrail T123-step
2.57 x 1.10 35.2 25 5410.301 P 2 2
10 Side end guardrail T122-step
2.00 x 1.10 30.4 25 5410.202 P 22.07 x 1.10 30.7 25 5410.206 W 2
11 Side end guardrail T123-step
2.57 x 1.10 34.3 25 5410.302 P 2 2
12 Corner guardrail, top Steel
1.10 x 0.28 11.2 40 5410.303 W 2 2 2 2
EN_PL_Event_2015.indd 21 10.03.2015 08:07:47
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
22
Event stands – benches and bucket seats
Event stands – benches and bucket seats Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 2 1 Benchanodised aluminium, coated plywood
1.57 x 0.30 7.2 5623.157 P 2 22.00 x 0.30 9.4 60 5623.200 W 22.07 x 0.30 9.5 60 5623.207 W 2 22.57 x 0.30 11.7 60 5623.257 W 2
2 Bench endanodised aluminium, coated plywood
0.06 x 0.30 0.5 5624.000 W 2 2 2 2
3a3b3c3d3e
3a Novanta bucket seat, blue-protected and flame-retardant
0.40 x 0.43 1.7 120 5408.021 W 2 2 2 2
3b3c
Plug, left, bluePlug, right, blue
0.2 20 V 5408.026 W 2 2 2 20.2 20 V 5408.027 W 2 2 2 2
3d Number plate, w/o lettering, white 0.2 20 V 5408.025 W 2 2 2 2
3e Assembly-Set for 20 bucket seatsexisting of 40 bolts 8 x 40, 40 nuts and 40 washers
1.2 120 5408.007 W
4 5 4 Bench, with holesfor ovanta bucket seats
1.57 x 0.30 7.2 60 5408.157 P 2 22.00 x 0.30 9.4 60 5408.200 P 22.07 x 0.30 9.5 60 5408.207 W 2 22.57 x 0.30 11.7 60 5408.257 W 2
5 Allround wedgeSteel, for securing bench, without rivets
0.14 3.3 25 V 6494.916 2 2 2 213.0 100 V 6494.918 W 2 2 2 2
6 7 8 6 Allround wedge, short, 90 mmwithout holes, for securing bench at edge of stand
0.09 1.0 10 V 6494.965 W 2 2 2 2
9 10 7 Bench adaptor for rise 16,70 cmfor rise 25,00 cm
0.42 3.7 350 5406.010 W 2 20.34 3.4 350 5406.015 W 2 2
8 Seat support with rosettefor bottom rows
0.34 4.0 300 5619.000 W 2 2 2 2
9 Tip-up seat, blue-protected and flame-retardant
0.42 x 0.19 3.2 on request 2 2 2 2
10 Aluminium frame for tip-up seatssuitable for all inclinations
1.04 5.8 on request 2 2 2 21.50 7.4 on request 2 2 2 21.57 7.6 on request 2 2 2 22.00 9.4 on request 2 2 2 22.07 9.7 on request 2 2 2 2112.57 11.8 on request 2 2 2 2
11 Adapter for frame for tip-up seats suitable for all inclinations
0.19 x 0.10 3.0 on request 2 2 2 2
1 2
ou can choose the seating to suit the application, but also to suit your specific conditions. There is a choice of benches, bucket seats and tip-up seats.
The Bench 1 is 0.30 m wide and comprises anodised aluminium stiles and smooth-coated plywood.
Benches are secured with wedges: Short wedges 6 are needed at the edge of the stand. Bench ends 2 are fitted at the access to the stand.
Novanta bucket seats 3a can be fastened to the benches. We recommend benches with predrilled holes here. The standard ovanta bucket seats are dark blue, -protected and flame-retardant.
The assembly material comprises per seat:2 bolts with square neck2 washers2 nuts1 plug, left1 plug, right
umber plate without lettering, white.
Alternatively, your own chairs can be placed on the Event stand.
The first row of seat is formed by the Seat support with rosette 8.
BB
EN_PL_Event_2015.indd 22 10.03.2015 08:07:52
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
23
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Event stands – benches and bucket seats Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 86
EV 86
QEV
100
EV 10
4
1 2 1 Benchanodised aluminium, coated plywood
1.57 x 0.30 7.2 5623.157 P 2 22.00 x 0.30 9.4 60 5623.200 W 22.07 x 0.30 9.5 60 5623.207 W 2 22.57 x 0.30 11.7 60 5623.257 W 2
2 Bench endanodised aluminium, coated plywood
0.06 x 0.30 0.5 5624.000 W 2 2 2 2
3a3b3c3d3e
3a Novanta bucket seat, blue-protected and flame-retardant
0.40 x 0.43 1.7 120 5408.021 W 2 2 2 2
3b3c
Plug, left, bluePlug, right, blue
0.2 20 V 5408.026 W 2 2 2 20.2 20 V 5408.027 W 2 2 2 2
3d Number plate, w/o lettering, white 0.2 20 V 5408.025 W 2 2 2 2
3e Assembly-Set for 20 bucket seatsexisting of 40 bolts 8 x 40, 40 nuts and 40 washers
1.2 120 5408.007 W
4 5 4 Bench, with holesfor ovanta bucket seats
1.57 x 0.30 7.2 60 5408.157 P 2 22.00 x 0.30 9.4 60 5408.200 P 22.07 x 0.30 9.5 60 5408.207 W 2 22.57 x 0.30 11.7 60 5408.257 W 2
5 Allround wedgeSteel, for securing bench, without rivets
0.14 3.3 25 V 6494.916 2 2 2 213.0 100 V 6494.918 W 2 2 2 2
6 7 8 6 Allround wedge, short, 90 mmwithout holes, for securing bench at edge of stand
0.09 1.0 10 V 6494.965 W 2 2 2 2
9 10 7 Bench adaptor for rise 16,70 cmfor rise 25,00 cm
0.42 3.7 350 5406.010 W 2 20.34 3.4 350 5406.015 W 2 2
8 Seat support with rosettefor bottom rows
0.34 4.0 300 5619.000 W 2 2 2 2
9 Tip-up seat, blue-protected and flame-retardant
0.42 x 0.19 3.2 on request 2 2 2 2
10 Aluminium frame for tip-up seatssuitable for all inclinations
1.04 5.8 on request 2 2 2 21.50 7.4 on request 2 2 2 21.57 7.6 on request 2 2 2 22.00 9.4 on request 2 2 2 22.07 9.7 on request 2 2 2 2112.57 11.8 on request 2 2 2 2
11 Adapter for frame for tip-up seats suitable for all inclinations
0.19 x 0.10 3.0 on request 2 2 2 2
EN_PL_Event_2015.indd 23 10.03.2015 08:07:53
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
24
Truss systems
VISUALLY ATTRACTIVE, LIGHTWEIGHT AND STABLE
The Layher Truss system contains 3-chord and 4-chord transoms of
aluminium. They are available as H30 and H40 series.
The Layher Truss system is developed for lightweight to intermediate-
heavy structures, which are mainly used in the exhibition sector. They are
characterised by very high stability, compactness, versatility and very low
operating weight. The installation is very simple, thanks to the direction-
independent framework.
LAYHER TRUSS SYSTEMS
2 a imum load earing capacit
Outstanding load-bearing values yet a low degree of sag.
2 Compatibility
Layher truss systems are compatible both with many other truss
systems and with ayher Allround e uipment.
2 a imum ualit
urable and value stable thanks to highest production uality.
T E E E IT T
EN_PL_Event_2015.indd 24 10.03.2015 08:07:58
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
25
T E E E IT T
ENORMOUSLY BEARING. HUGE SPANS. FOR DIFFERENT SCOPES OF APPLICATION
Constructions, which are made to carry high loads and however must be
easy and fast to assembly, need well-thought and strong components.
Layher offers with the new steel truss the right tools for that challenge.
LAYHER STEEL TRUSS SYSTEMS
2 Attractive outer dimensions.
2 High load-bearing capacity.
2 Large spans.
2 Quick assembly thanks to well-known fork-connectors.
EN_PL_Event_2015.indd 25 10.03.2015 08:08:05
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
26
Alu truss systems
Order the catalogue
rolling towers and ladders
LAYHER LADDERS & STAIRSLAYHER ROLLING TOWERS
CATALOGUE
Edition 04.2015Ref. No. 8118.225
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
Alu truss systems Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
1 1 Truss H30D, aluminium straight, 3-chord, external dimension 287 mm
0.25 x 0.26 x 0.29 2.0 5718.025 P0.50 x 0.26 x 0.29 3.0 5718.050 P0.71 x 0.26 x 0.29 3.9 5718.071 P0.75 x 0.26 x 0.29 4.1 5718.075 P1.00 x 0.26 x 0.29 5.1 5718.100 P1.50 x 0.26 x 0.29 7.4 5718.150 P2.00 x 0.26 x 0.29 9.5 5718.200 P2.50 x 0.26 x 0.29 11.7 5718.250 P3.00 x 0.26 x 0.29 13.8 5718.300 P3.50 x 0.26 x 0.29 15.6 5718.350 P4.00 x 0.26 x 0.29 22.3 5718.400 P4.50 x 0.26 x 0.29 27.5 5718.450 P5.00 x 0.26 x 0.29 32.5 5718.500 P
2 2 Truss H30V, aluminiumstraight, 4-chord, external dimension 287 mm
0.25 x 0.29 x 0.29 2.5 5721.025 P0.50 x 0.29 x 0.29 4.0 5721.050 P0.71 x 0.29 x 0.29 5.1 5721.071 P0.75 x 0.29 x 0.29 5.5 5721.075 P1.00 x 0.29 x 0.29 6.8 5721.100 P1.50 x 0.29 x 0.29 10.1 5721.150 P2.00 x 0.29 x 0.29 12.5 5721.200 P2.50 x 0.29 x 0.29 15.3 5721.250 P3.00 x 0.29 x 0.29 18.9 5721.300 P3.50 x 0.29 x 0.29 21.1 5721.350 P4.00 x 0.29 x 0.29 23.9 5721.400 P4.50 x 0.29 x 0.29 26.8 5721.450 P5.00 x 0.29 x 0.29 29.6 5721.500 P
3 3 Truss H40D, aluminiumstraight, 3-chord, external dimension 387 mm
0.25 x 0.34 x 0.39 2.7 5736.025 P0.50 x 0.34 x 0.39 3.3 5736.050 P0.75 x 0.34 x 0.39 4.5 5736.075 P0.81 x 0.34 x 0.39 5.0 5736.081 P1.00 x 0.34 x 0.39 5.7 5736.100 P1.50 x 0.34 x 0.39 8.1 5736.150 P2.00 x 0.34 x 0.39 10.2 5736.200 P2.50 x 0.34 x 0.39 13.1 5736.250 P3.00 x 0.34 x 0.39 15.1 5736.300 P3.50 x 0.34 x 0.39 17.4 5736.350 P4.00 x 0.34 x 0.39 20.0 5736.400 P4.50 x 0.34 x 0.39 22.4 5736.450 P5.00 x 0.34 x 0.39 25.1 5736.500 P
4 4 Truss H40V, aluminiumstraight, 4-chord, external dimension 387 mm
0.25 x 0.39 x 0.39 3.4 5739.025 P0.50 x 0.39 x 0.39 4.7 5739.050 P0.75 x 0.39 x 0.39 6.3 5739.075 P0.81 x 0.39 x 0.39 6.7 5739.081 P1.00 x 0.39 x 0.39 8.1 5739.100 P1.50 x 0.39 x 0.39 11.0 5739.150 P2.00 x 0.39 x 0.39 18.2 5739.200 P2.50 x 0.39 x 0.39 17.7 5739.250 P3.00 x 0.39 x 0.39 20.8 5739.300 P3.50 x 0.39 x 0.39 21.1 5739.350 P4.00 x 0.39 x 0.39 26.8 5739.400 P4.50 x 0.39 x 0.39 30.3 5739.450 P5.00 x 0.39 x 0.39 32.7 5739.500 P
5a 5b 5c 5d 5abcdefgh
Truss corners H30D, aluminium2-way 90 degree2-way 90 degree2-way 90 degree3-way 90 degree3-way 90 degree4-way T-piece4-way T-piece4-way cross
0.50 x 0.30 x 0.50 3.9 5720.003 P0.50 x 0.30 x 0.50 3.8 5720.006 P0.50 x 0.30 x 0.50 4.3 5720.007 P0.50 x 0.50 x 0.50 6.0 5720.012 P
5e 5f 5g 5h 0.50 x 0.50 x 0.50 6.0 5720.013 P0.71 x 0.50 x 0.50 7.6 5720.014 P0.71 x 0.50 x 0.50 7.6 5720.015 P0.71 x 0.30 x 0.71 7.6 5720.016 P
The Layher Truss system contains 3-chord and 4-chord transoms of aluminium. They are available as H30 and H40 series.
The Layher Truss system is developed for lightweight to intermediate-heavy structures, which are mainly used in the exhibition sector. They are characterised by very high stability, compactness, versatility and very low operating weight. The installation is very simple, thanks to the direction-independent framework.
uring the assembly of many truss structures, ladders and rolling towers are a constant campanion.
Also therefore, ayher is your dependable partner.
EN_PL_Event_2015.indd 26 10.03.2015 08:08:10
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
27
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Alu truss systems Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
1 1 Truss H30D, aluminium straight, 3-chord, external dimension 287 mm
0.25 x 0.26 x 0.29 2.0 5718.025 P0.50 x 0.26 x 0.29 3.0 5718.050 P0.71 x 0.26 x 0.29 3.9 5718.071 P0.75 x 0.26 x 0.29 4.1 5718.075 P1.00 x 0.26 x 0.29 5.1 5718.100 P1.50 x 0.26 x 0.29 7.4 5718.150 P2.00 x 0.26 x 0.29 9.5 5718.200 P2.50 x 0.26 x 0.29 11.7 5718.250 P3.00 x 0.26 x 0.29 13.8 5718.300 P3.50 x 0.26 x 0.29 15.6 5718.350 P4.00 x 0.26 x 0.29 22.3 5718.400 P4.50 x 0.26 x 0.29 27.5 5718.450 P5.00 x 0.26 x 0.29 32.5 5718.500 P
2 2 Truss H30V, aluminiumstraight, 4-chord, external dimension 287 mm
0.25 x 0.29 x 0.29 2.5 5721.025 P0.50 x 0.29 x 0.29 4.0 5721.050 P0.71 x 0.29 x 0.29 5.1 5721.071 P0.75 x 0.29 x 0.29 5.5 5721.075 P1.00 x 0.29 x 0.29 6.8 5721.100 P1.50 x 0.29 x 0.29 10.1 5721.150 P2.00 x 0.29 x 0.29 12.5 5721.200 P2.50 x 0.29 x 0.29 15.3 5721.250 P3.00 x 0.29 x 0.29 18.9 5721.300 P3.50 x 0.29 x 0.29 21.1 5721.350 P4.00 x 0.29 x 0.29 23.9 5721.400 P4.50 x 0.29 x 0.29 26.8 5721.450 P5.00 x 0.29 x 0.29 29.6 5721.500 P
3 3 Truss H40D, aluminiumstraight, 3-chord, external dimension 387 mm
0.25 x 0.34 x 0.39 2.7 5736.025 P0.50 x 0.34 x 0.39 3.3 5736.050 P0.75 x 0.34 x 0.39 4.5 5736.075 P0.81 x 0.34 x 0.39 5.0 5736.081 P1.00 x 0.34 x 0.39 5.7 5736.100 P1.50 x 0.34 x 0.39 8.1 5736.150 P2.00 x 0.34 x 0.39 10.2 5736.200 P2.50 x 0.34 x 0.39 13.1 5736.250 P3.00 x 0.34 x 0.39 15.1 5736.300 P3.50 x 0.34 x 0.39 17.4 5736.350 P4.00 x 0.34 x 0.39 20.0 5736.400 P4.50 x 0.34 x 0.39 22.4 5736.450 P5.00 x 0.34 x 0.39 25.1 5736.500 P
4 4 Truss H40V, aluminiumstraight, 4-chord, external dimension 387 mm
0.25 x 0.39 x 0.39 3.4 5739.025 P0.50 x 0.39 x 0.39 4.7 5739.050 P0.75 x 0.39 x 0.39 6.3 5739.075 P0.81 x 0.39 x 0.39 6.7 5739.081 P1.00 x 0.39 x 0.39 8.1 5739.100 P1.50 x 0.39 x 0.39 11.0 5739.150 P2.00 x 0.39 x 0.39 18.2 5739.200 P2.50 x 0.39 x 0.39 17.7 5739.250 P3.00 x 0.39 x 0.39 20.8 5739.300 P3.50 x 0.39 x 0.39 21.1 5739.350 P4.00 x 0.39 x 0.39 26.8 5739.400 P4.50 x 0.39 x 0.39 30.3 5739.450 P5.00 x 0.39 x 0.39 32.7 5739.500 P
5a 5b 5c 5d 5abcdefgh
Truss corners H30D, aluminium2-way 90 degree2-way 90 degree2-way 90 degree3-way 90 degree3-way 90 degree4-way T-piece4-way T-piece4-way cross
0.50 x 0.30 x 0.50 3.9 5720.003 P0.50 x 0.30 x 0.50 3.8 5720.006 P0.50 x 0.30 x 0.50 4.3 5720.007 P0.50 x 0.50 x 0.50 6.0 5720.012 P
5e 5f 5g 5h 0.50 x 0.50 x 0.50 6.0 5720.013 P0.71 x 0.50 x 0.50 7.6 5720.014 P0.71 x 0.50 x 0.50 7.6 5720.015 P0.71 x 0.30 x 0.71 7.6 5720.016 P
EN_PL_Event_2015.indd 27 10.03.2015 08:08:11
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
28
Alu truss systems
Alu truss systems Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
1a 1b 1c 1abcdef
Truss corners H30D, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way
0.50 x 0.30 x 0.50 5.3 5723.003 P0.50 x 0.50 x 0.50 6.8 5723.012 P0.71 x 0.30 x 0.71 10.2 5723.016 P0.71 x 0.30 x 0.50 8.1 5723.017 P
1d 1e 1f 0.71 x 0.50 x 0.50 10.1 5723.020 P0.71 x 0.50 x 0.71 11.9 5723.024 P
2a 2b 2c 2d 2abcdefgh
Truss corners H40D, aluminium2-way 90 degree2-way 90 degree2-way 90 degree3-way 90 degree3-way 90 degree4-way T-piece4-way T-piece4-way cross
0.60 x 0.40 x 0.60 5.1 5738.003 P0.60 x 0.40 x 0.60 4.8 5738.006 P0.60 x 0.40 x 0.60 5.8 5738.007 P0.60 x 0.60 x 0.60 7.7 5738.012 P0.60 x 0.60 x 0.60 7.7 5738.013 P
2e 2f 2g 2h 0.90 x 0.60 x 0.60 10.2 5738.014 P0.90 x 0.60 x 0.60 10.2 5738.015 P0.80 x 0.40 x 0.80 9.4 5738.016 P
3a 3b 3c 3abcdef
Truss corners H40V, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way
0.60 x 0.40 x 0.60 7.0 5741.003 P0.60 x 0.60 x 0.60 9.2 5741.012 P0.80 x 0.40 x 0.80 12.8 5741.016 P0.80 x 0.40 x 0.60 10.5 5741.017 P
3d 3e 3f 0.80 x 0.60 x 0.60 12.8 5741.020 P0.80 x 0.60 x 0.80 15.1 5741.024 P
4 4a 4b 4ab
o Corner 30V, aluminiumAttachment Attachment
0.29 x 0.29 x 0.29 9.8 5714.030 P0.105 x 0.29 x 0.29 1.3 5714.031 P0.21 x 0.29 x 0.29 3.3 5714.032 P
5 5a 5b 5ab
o Corner 40V, aluminiumAttachment Attachment
0.39 x 0.39 x 0.39 12.1 5732.030 P0.105 x 0.39 x 0.39 1.5 5732.031 P0.21 x 0.39 x 0.39 3.3 5732.032 P
6a 6b 6ab
Base plate H30, aluminium3-chord 304-chord 30
0.33 x 0.30 1.0 5701.072 P0.33 x 0.33 1.7 5701.073 P
7a 7b 7ab
Base plate H40, aluminium3-chord 404-chord 40
0.43 x 0.38 1.6 5701.077 P0.43 x 0.43 2.9 5701.078 P
8a 8 8c 8abc
Connection partsConic connectorConic boltSecuring pin
0.09 0.2 5701.020 W0.07 0.0 5701.023 W0.06 0.0 5701.007 W
9 10 9 Conic olt it nut 8 0.07 0.1 5701.024 W
10 Conic half connector with thread M12 0.04 0.1 5701.034 W
EN_PL_Event_2015.indd 28 10.03.2015 08:08:16
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
29
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Alu truss systems Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
1a 1b 1c 1abcdef
Truss corners H30D, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way
0.50 x 0.30 x 0.50 5.3 5723.003 P0.50 x 0.50 x 0.50 6.8 5723.012 P0.71 x 0.30 x 0.71 10.2 5723.016 P0.71 x 0.30 x 0.50 8.1 5723.017 P
1d 1e 1f 0.71 x 0.50 x 0.50 10.1 5723.020 P0.71 x 0.50 x 0.71 11.9 5723.024 P
2a 2b 2c 2d 2abcdefgh
Truss corners H40D, aluminium2-way 90 degree2-way 90 degree2-way 90 degree3-way 90 degree3-way 90 degree4-way T-piece4-way T-piece4-way cross
0.60 x 0.40 x 0.60 5.1 5738.003 P0.60 x 0.40 x 0.60 4.8 5738.006 P0.60 x 0.40 x 0.60 5.8 5738.007 P0.60 x 0.60 x 0.60 7.7 5738.012 P0.60 x 0.60 x 0.60 7.7 5738.013 P
2e 2f 2g 2h 0.90 x 0.60 x 0.60 10.2 5738.014 P0.90 x 0.60 x 0.60 10.2 5738.015 P0.80 x 0.40 x 0.80 9.4 5738.016 P
3a 3b 3c 3abcdef
Truss corners H40V, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way
0.60 x 0.40 x 0.60 7.0 5741.003 P0.60 x 0.60 x 0.60 9.2 5741.012 P0.80 x 0.40 x 0.80 12.8 5741.016 P0.80 x 0.40 x 0.60 10.5 5741.017 P
3d 3e 3f 0.80 x 0.60 x 0.60 12.8 5741.020 P0.80 x 0.60 x 0.80 15.1 5741.024 P
4 4a 4b 4ab
o Corner 30V, aluminiumAttachment Attachment
0.29 x 0.29 x 0.29 9.8 5714.030 P0.105 x 0.29 x 0.29 1.3 5714.031 P0.21 x 0.29 x 0.29 3.3 5714.032 P
5 5a 5b 5ab
o Corner 40V, aluminiumAttachment Attachment
0.39 x 0.39 x 0.39 12.1 5732.030 P0.105 x 0.39 x 0.39 1.5 5732.031 P0.21 x 0.39 x 0.39 3.3 5732.032 P
6a 6b 6ab
Base plate H30, aluminium3-chord 304-chord 30
0.33 x 0.30 1.0 5701.072 P0.33 x 0.33 1.7 5701.073 P
7a 7b 7ab
Base plate H40, aluminium3-chord 404-chord 40
0.43 x 0.38 1.6 5701.077 P0.43 x 0.43 2.9 5701.078 P
8a 8 8c 8abc
Connection partsConic connectorConic boltSecuring pin
0.09 0.2 5701.020 W0.07 0.0 5701.023 W0.06 0.0 5701.007 W
9 10 9 Conic olt it nut 8 0.07 0.1 5701.024 W
10 Conic half connector with thread M12 0.04 0.1 5701.034 W
EN_PL_Event_2015.indd 29 10.03.2015 08:08:17
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
30
Steel truss systems
Tower Truss a i Truss
pan m perm. line load p kg m
Bending cm
of perm. p
perm. single load F
kg
Bending cm
of perm. F
perm. single load in third
points F1 kg
Bending cm
of perm. F1
2 5865 0.1 11729 0.1 5865 0.14 2914 0.3 8210 0.3 5827 0.46 1804 0.9 5411 0.7 4059 1.08 998 1.6 3993 1.3 2995 1.710 626 2.5 3127 2.0 2345 2.612 423 3.5 2538 2.8 1903 3.614 301 4.6 2106 3.7 1579 4.716 222 5.7 1773 4.6 1329 5.918 167 6.9 1505 5.5 1129 7.220 128 8.1 1284 6.5 963 8.422 100 9.2 1096 7.4 822 9.624 78 10.2 933 8.1 700 10.626 61 11.0 789 8.8 592 11.428 47 11.5 661 9.2 496 11.9
pan m perm. line load p kg m
Bending cm
of perm. p
perm. single load F
kg
Bending cm
of perm. F
perm. single load in third
points F1 kg
Bending cm
of perm. F1
2 5425 0.1 8676 0.1 5425 0.14 2147 0.7 4294 0.5 3220 0.76 938 1.5 2813 1.2 2110 1.68 514 2.6 2058 2.1 1543 2.710 319 3.9 1593 3.1 1195 4.112 212 5.4 1273 4.3 955 5.614 148 7.0 1036 5.6 777 7.316 106 8.6 851 6.9 638 8.918 78 10.1 700 8.0 525 10.420 57 11.3 574 9.0 430 11.722 42 12.2 465 9.8 349 12.624 31 12.6 369 10.1 277 13.026 22 12.3 284 9.8 213 12.728 15 11.1 206 8.9 155 11.6
0
1.000
2.000
3.000
4.000
5.000
6.000
7.000
8.000
9.000
10.000
2 4 6 8 10 12 14 16 18 20 22 24 26 28
zul. vert. Streckenlast p [kN/m]
zul. Einzellast F [kN/m]
zul. Punktlast bei 2 Drittelpunkten F [kN/m]
pan m
p kg/mF, F
1 kg
0
2.000
4.000
6.000
8.000
10.000
12.000
14.000
2 4 6 8 10 12 14 16 18 20 22 24 26 28
zul. vert. Streckenlast p [kN/m]
zul. Einzellast F [kN/m]
zul. Punktlast bei 2 Drittelpunkten F [kN/m]
pan m
p kg/mF, F
1 kg
1 2 3 4 5 6 Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
1 Tower-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of axi-Truss,
as ground support, for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip
299 x 299Axial dimensions
on request
2 a i Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,
for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip
569 x 569 Axial dimensions
on request
3 Nova-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of uper-Truss,
as ground support, for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip
452 x 452 Axial dimensions
on request
7 8
4 Super-Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,
for advertisment signs or cable bridges, se with bolt dia. 20.00 mm and spins clip
550 x 854 Axial dimensions
on request
5 Bolt, dia. 15.80 mm for Tower-Truss, ova-Truss and axi-Truss
15.80 x 80 0.17 on request
6 Bolt, dia. 20.00 mm for Super-Truss
20 x 100 0.32 on request
7 Safety clip, 2.80 mm for Tower-Truss, ova-Truss and axi-Truss
0.5 50 V 4905.001
8 Safety clip, 4 mm for Super-Truss
1.5 50 V 5905.001
perm. line load p kg/m
perm. single load kg
perm. single load in third points F
1 kg
perm. line load p kg/m
perm. single load kg
perm. single load in third points F
1 kg
569 569
dia. 48,30
550 854
dia. 60,30
452 452
dia. 48,30
299 299
dia. 48,30
EN_PL_Event_2015.indd 30 10.03.2015 08:08:23
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
31
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
Nova Truss
The steel truss elements will be produced individually according to your requirements of length. Do not hesitate to ask us! We are pleased to help you.
Super Truss
pan m perm. line load p kg m
Bending cm
of perm. p
perm. single load F
kg
Bending cm
of perm. F
perm. single load in third
points F1 kg
Bending cm
of perm. F1
14 877 3.3 6137 2.6 4603 3.416 659 4.2 5268 3.4 3951 4.418 509 5.2 4580 4.2 3435 5.420 402 6.3 4019 5.0 3015 6.522 323 7.4 3551 5.9 2663 7.724 263 8.5 3151 6.8 2363 8.826 216 9.6 2804 7.7 2103 10.028 179 10.7 2500 8.6 1875 11.130 149 11.8 2228 9.4 1671 12.232 124 12.7 1984 10.2 1488 13.234 104 13.5 1762 10.8 1322 14.036 87 14.2 1559 11.4 1169 14.738 72 14.7 1371 11.8 1028 15.240 60 15.0 1197 12.0 898 15.5
pan m perm. line load p kg m
Bending cm
of perm. p
perm. single load F
kg
Bending cm
of perm. F
perm. single load in third
points F1 kg
Bending cm
of perm. F1
2 4724 0.1 9448 0.1 4724 0.14 2341 0.3 6497 0.4 4682 0.46 1421 1.0 4262 0.8 3196 1.08 781 1.7 3123 1.4 2342 1.810 485 2.6 2423 2.1 1817 2.712 324 3.6 1943 2.9 1457 3.814 227 4.7 1587 3.8 1191 4.916 164 5.8 1311 4.7 983 6.018 121 6.9 1086 5.5 814 7.120 90 7.8 898 6.2 673 8.122 67 8.5 736 6.8 552 8.824 50 8.9 595 7.1 446 9.226 36 8.9 468 7.1 351 9.328 25 8.4 354 6.7 266 8.7
0
1.000
2.000
3.000
4.000
5.000
6.000
7.000
8.000
9.000
10.000
2 4 6 8 10 12 14 16 18 20 22 24 26 28
zul. vert. Streckenlast p [kN/m]
zul. Einzellast F [kN/m]
zul. Punktlast bei 2 Drittelpunkten F [kN/m]
perm. line load p kg/m
perm. single load kg
perm. single load in third points F
1 kg
p kg/mF, F
1 kg
pan m 0
1.000
2.000
3.000
4.000
5.000
6.000
7.000
14 16 18 20 22 24 26 28 30 32 34 36 38 40
zul. vert. Streckenlast p [kN/m]
zul. Einzellast F [kN/m]
zul. Punktlast bei 2 Drittelpunkten F [kN/m]
perm. line load p kg/m
perm. single load kg
perm. single load in third points F
1 kg
p kg/mF, F
1 kg
pan m
1 2 3 4 5 6 Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
1 Tower-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of axi-Truss,
as ground support, for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip
299 x 299Axial dimensions
on request
2 a i Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,
for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip
569 x 569 Axial dimensions
on request
3 Nova-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of uper-Truss,
as ground support, for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip
452 x 452 Axial dimensions
on request
7 8
4 Super-Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,
for advertisment signs or cable bridges, se with bolt dia. 20.00 mm and spins clip
550 x 854 Axial dimensions
on request
5 Bolt, dia. 15.80 mm for Tower-Truss, ova-Truss and axi-Truss
15.80 x 80 0.17 on request
6 Bolt, dia. 20.00 mm for Super-Truss
20 x 100 0.32 on request
7 Safety clip, 2.80 mm for Tower-Truss, ova-Truss and axi-Truss
0.5 50 V 4905.001
8 Safety clip, 4 mm for Super-Truss
1.5 50 V 5905.001
EN_PL_Event_2015.indd 31 10.03.2015 08:08:26
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
32
QUICK AND CLEAN. FLEXIBLE FRONT-OF-HOUSE SOLUTIONS FROM LAYHER
The ayher Tower it ystem provides you with the right solution
for your Front-Of-House applications. To meet the most frequently
encountered re uirements, a total of 12 Tower complete ITs are
available.
E TE A A IA T
Thanks to the it ystem and ayher s flexible Allround e uipment,
there are no limits placed on variation.
hether it s a 2 or 3 bay width, with or without a projecting roof and
entrance, with 1, 2 or 3 stories. The ayher Tower it ystem means
more possibilities. Typical for Layher!
LAYHER FOH TOWER KIT SYSTEM
2 Quick and easy assembly thanks to optimum use of material.
2 eat and practically-minded design down to the last detail.
2 Each of the maximum of three levels is without a hindering
central support.
2 Complete enclosure using keder tarpaulins.
2 ery few special parts.
2 alculated in accordance with the latest standard E 13814.
2 Two inspection books available 4.14 x 4.14 (4 x 4) 6.21 x 4.14 (6 x 4).
T E E E IT T
FOH System, Roof and wall cladding
EN_PL_Event_2015.indd 32 10.03.2015 08:08:32
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
33
EN_PL_Event_2015.indd 33 10.03.2015 08:08:36
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
34
FOH System
FOH System Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 10
0EV
104
1 1 FOH beam 4.00 38.1 5573.010 W 2
4.14 38.6 5573.011 W 2
2 3 2 Event access deckwith aluminium hatch
1.00 x 2.00 33.5 5402.073 P 2
1.04 x 2.07 35.5 5402.083 P 2
3 Single step ladder with hook,10-steps, for item 7for storey height 2.50 m
2.70 x 0.45 7.7 5573.021 W 2 2
4 4 FOH rope holder set4 partsfor connection of the ballast bays
2.7 5573.002 W 2 2
5 6 Assem l os. 4 5 5 Rope fastenerfor ballast bays
1.20 1.3 5573.005 P 2 2
6 Rope fastenerfor roof stiffening
as 4.00 x 4.00 m 5.57 7.5 5573.003 P 2 2as 4.14 x 4.14 m 5.77 7.6 5573.004 P 2 2
Roof and wall cladding
Roof and wall cladding Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
7 - 9 10 7 Aluminium keder rail 2000 for side tarpaulins
2.50 3.8 4201.250 W
11 8 Aluminium keder rail 3000for roof tarpaulins
2.00 6.1 5574.200 P
3.00 9.2 5574.300 P
4.00 12.2 5574.400 P
5.00 15.3 5574.500 P
6.00 18.3 5574.600 W
9 Aluminium keder rail 9000 5.00 54.8 5577.500 P
6.00 65.8 5577.600 P
9.00 98.7 5577.900 P
10 Keder rail holder, rotatable 0.9 5573.000 W11 Hinged attachment for Event roof 3.4 5573.001 W
12 12 Half-coupler, with plate 0.20 x 0.10 2.1 5573.030 P
The ayher Tower it ystem provides you with the right solution for your Front-Of-House applications. To meet the most frequently encountered requirements, a total of 12 Tower complete IT are available.
One system – many variantsThanks to the it ystem and ayher s flexible Allround equipment, there are no limits placed on variation.
Whether it’s a 2 or 3 bay width, with or without a projecting roof and entrance, with 1, 2, or 3 storeys
5 6
The proven keder rail 2000. nown for its low weight. Ideal for lightweight applications, particularly for wall coverings and scaffolding covers.
The keder rail 3000 – very strong yet light. It is perfectly suited for medium spans, as found for example in and directing towers or in technical equipment and storage areas. The keder rail 3000 can also be used as a wall keder rail over large spans.
The keder rail 9000 is suitable as a heavy-duty marquee section for large and very large spans. Roofs and side coverings for large open-air stages can be constructed with this section, in addition to massive roofs for stands.
Assem l os. 4 5
7 - 9
EN_PL_Event_2015.indd 34 10.03.2015 08:08:42
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
35
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit
FOH System Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
EV 10
0EV
104
1 1 FOH beam 4.00 38.1 5573.010 W 2
4.14 38.6 5573.011 W 2
2 3 2 Event access deckwith aluminium hatch
1.00 x 2.00 33.5 5402.073 P 2
1.04 x 2.07 35.5 5402.083 P 2
3 Single step ladder with hook,10-steps, for item 7for storey height 2.50 m
2.70 x 0.45 7.7 5573.021 W 2 2
4 4 FOH rope holder set4 partsfor connection of the ballast bays
2.7 5573.002 W 2 2
5 6 Assem l os. 4 5 5 Rope fastenerfor ballast bays
1.20 1.3 5573.005 P 2 2
6 Rope fastenerfor roof stiffening
as 4.00 x 4.00 m 5.57 7.5 5573.003 P 2 2as 4.14 x 4.14 m 5.77 7.6 5573.004 P 2 2
Roof and wall cladding Pos. Description Dimensions m
Weight appro . kg
PUpcs.
Ref. No.
7 - 9 10 7 Aluminium keder rail 2000 for side tarpaulins
2.50 3.8 4201.250 W
11 8 Aluminium keder rail 3000for roof tarpaulins
2.00 6.1 5574.200 P
3.00 9.2 5574.300 P
4.00 12.2 5574.400 P
5.00 15.3 5574.500 P
6.00 18.3 5574.600 W
9 Aluminium keder rail 9000 5.00 54.8 5577.500 P
6.00 65.8 5577.600 P
9.00 98.7 5577.900 P
10 Keder rail holder, rotatable 0.9 5573.000 W11 Hinged attachment for Event roof 3.4 5573.001 W
12 12 Half-coupler, with plate 0.20 x 0.10 2.1 5573.030 P
EN_PL_Event_2015.indd 35 10.03.2015 08:08:42
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
36
Inde
AAdapter for frame for tip-up seat 23
Allround wedge 23
Alu leg insert Q60 T13 17
Aluminium frame for tip-up seat 23
Alu truss system 26, 28
Assembly- et 23
BBase beam 15
Base collar 10, 11, 12
Base collar for modular stairway 13
Base lattice beam 15
Base plate20 10, 1140 10, 1160 1160, solid 10H30 29H40 29type 1 15type 2 15
Basic component 10
Bench 22, 23
Bench adaptor 23
Bench end 22, 23
Boltdia. 15.80 mm 30dia. 20.00 mm 30
10 x 70 21
ox orner30 2940 29
CClamp 16, 17
Conic bolt 29
Conic half connector 29
Connection part 29
Corner guardrail 21
EEvent access deck 35
Event deck 10
Event deck T10 11, 17square 11, 17
Event stage 8, 10
Event stands 18basic components and guardrails for stands 20benches and bucket seats 22
Event system 16
Event transom 10, 11
FFOH beam 35
FOH rope holder set 35
FOH System 32, 34
GGuardrail 12
Guardrail for modular stairway 13
Guardrail post for podium 13
Guardrail standard 20, 21
Guardrails with child safety features 12
Guardrail with child safety feature 13
HHalf-coupler 35
Handrail 12, 13
Hinged attachment 35
Hinged feet 16
Hinged foot 17
IInsert leg 16
Insert leg connector 16, 17
Intermediate step 21
Keder rail 2000 34, 35
eder rail 3000 34, 35
eder rail 9000 34, 35
eder rail holder 35
LLeg insert platform 16
Leg insert support 16, 17
Lift-off preventer 13, 21
Lift-off preventer for steel decks 21
Lock against lift-off 20
Lock against lift-off ST 86 20
Maxi-Truss 30
Novanta bucket seat 22, 23
ova-Truss 30
umber plate 23
OO-ledger 12
O-ledger LW 13
PPlastic corner 10, 11
Plug 23
Podia 8
QQ60 aluminium leg 16
RRoof and wall cladding 32, 34
Rope fastenerfor ballast bays 35for roof stiffening 35
Rubber pad 10, 11
SSafety clip
2.80 mm 304 mm 30
Seating stand 7
Seat support with rosette 22, 23
Short wedge 22
Side end guardrail 21
Side guardrail 21
Single step ladder 35
Special bolt with nut 15
Square half-coupler 10, 11
Stage 6
Stairway 12
Stairway guardrail 750 13
Stairway stringer 12
Standard0.67 m 10, 111.17 m 10, 11
Standard for modular stairway 13
Stand element1-step 20, 212-step 20, 21
Stand system 6
Steel deck support 20, 21
Steel truss system 30
Stringer for modular stairway 12, 13
Super-Truss 30
TTension clasp 10
Tension clasp for transom 11
Tip-up seat 23
Tower-Truss 30
Transom support 10, 11
Truss30 2730 2740 2740 27
Truss corners30 27, 2940 2940 29
Truss system 24
Truss-Transom 15
Universal base 14
- tairway stringer 750 13
EN_PL_Event_2015.indd 36 10.03.2015 08:08:42
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
37
EN_PL_Event_2015.indd 37 10.03.2015 08:08:43
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
38
Notes
EN_PL_Event_2015.indd 38 10.03.2015 08:08:43
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
39
EN_PL_Event_2015.indd 39 10.03.2015 08:08:43
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf
ef.
o. 8
111.
227
Editi
on 0
4.20
15
Wilhelm Layher GmbH & Co. KGScaffolding Grandstands Ladders
Ochsenbacher Strasse 5674363 Gueglingen-EibensbachGermany
Post ox 4074361 Gueglingen-EibensbachGermanyTelephone 49 (0) 71 35 70-0Telefax 49 (0) 71 35 70-2 65E-mail export layher.comwww.layher.com
Proximity to the customer is a central factor behind ayher s success geographically spea-king too. Wherever our customers need us, we will be there – with our advice, assistance and solutions.
Layher is your dependable partner with more than 70 years of experience. ”Made by Layher“ always means ”Made in Germany“ too – and that goes for the entire product range. Superb quality – and all from one source.
ead arter in i en ac
Plant 2 in Gueglingen
SpeedyScaf
Allround Scaffolding
Event Systems
Accessories
Protective Systems
Shoring
Rolling Towers
Ladders
EN_PL_Event_2015.indd 40 10.03.2015 08:08:51
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA
0101
7422
_Kat
_Eve
nt_E
N.p
df
PA01017422_Kat_Event_EN.pdf
PA01017422_Kat_Event_EN.pdf