LAYHER EVENT SYSTEMS CATALOGUE - Trescon Group OÜRef. No. 8111.227 Quality management certified according to ISO 9001:2008 by German TÜV-CERT LAYHER EVENT SYSTEMS CATALOGUE EN_PL_Event_2015.indd

Edition 04.2015Ref. No. 8111.227

Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT

LAYHER EVENT SYSTEMSCATALOGUE

EN_PL_Event_2015.indd 1 10.03.2015 08:06:11

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA01017422_Kat_Event_EN.pdf


2

Layher

ead arter in i en ac

Plant 2 in Gueglingen

HERE IS THE BEATING HEART OF LAYHER.

Quality made by Layher comes from Gueglingen-Eibensbach. Our company

has set down deep local roots since it was established. Right up until today,

development, production, logistics and management are all in one place, where

the conditions are best for achieving quality made by Layher: in Gueglingen-

Eibensbach. The two locations together cover a surface area of 318,000 m².

This includes more than 142,000 m² of covered production and storage areas.

This is where our scaffolding systems are created by highly automated

production. Short distances and short reaction times mean we can adapt

production to suit our customers re uirements, flexibly and at any time.

MORE POSSIBILITIES. THE SCAFFOLDING SYSTEM.

This brand promise made by ayher is the expression of a brand philosophy that

we ve been living by for over 70 years. ore speed, more safety, more proximity,

more simplicity and more future: values with which we strengthen our customers’

competitiveness in the long term. With our innovative systems and solutions,

we’re working all the time on making scaffolding construction even simpler, even

more economical and, above all, even safer. With comprehensive services, a

permanent range of training courses and an ethos of customer focus, more than

1,500 dedicated Layher employees are creating more possibilities for our

customers every single day. In more than 30 countries all over the world.

QUALITY MADE BY LAYHER

EN_PL_Event_2015.indd 2 10.03.2015 08:06:18

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



3

MORE SPEEDWe can supply any required quantity of the right products at the right time – to anywhere in

the world. ayher has subsidiaries in more than 30 countries in all five continents, with a

tight-knit network of national service centers. Speed is also the motto of our logistics

concept. Customers have the choice of picking up their material at a Layher service center or

having it delivered either to a warehouse or “just in time” directly to the site.

MORE EXPERIENCETradition has grown into experience and expertise. ur experts pass on this knowledge all

over the world. Existing customers might want to try a different approach, while new

customers might need support when assembling a Layher scaffolding structure. Layher’s

specialists get to grips with the specific tasks and re uirements, devising for our customers

persuasive solutions that are both profitable and efficient. ood advice from ayher is

guaranteed. We take care of our customers at every level, because cooperation with them on

the basis of mutual trust as well as their success are important to us.

MORE KNOWLEDGEFurther training is the key to success. For this reason, Layher organizes regular training

seminars that prepare our customers for current and future challenges specifically in

scaffolding. This training scheme is backed up by many others options, for example practical

product training courses and regular meetings for scaffolding erectors to promote the flow of

information between experts and colleagues. And last but not least, ayher offers

comprehensive publications on all topics to do with scaffolding construction.

MORE CLARITYaving time, using material in the best way, improving logistics. All that can be done with

ayher s planning software, ayP A , or the special ayher tools for Auto A . ayher

software means greater reliability when budgeting and planning scaffolding construction

projects. Optimization of inventory management and complete cost transparency for the

material used in a project. Once the dimensions and the required assembly variant have been

entered, the Layher software supplies a scaffolding proposal with matching material list

within seconds.

MORE QUALITYPeople talk a lot about quality. We just produce it. Quality from Layher means state-of-the-art

production processes, carefully selected materials, smart automation and a highly ualified

workforce. ur products comply with the very latest security standards and possess I I

certification, erman T approval, and many other erman and international uality labels.

20,000 kilometres of steel tubing in high-quality workmanship are convincing testimony to

Layher’s quality standards.

More Possibilities. The Scaffolding System.

EN_PL_Event_2015.indd 3 10.03.2015 08:06:33

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



4

Contents

2 Truss systems Page 24

2 Leg insert platforms Page 16

2 Event stages Page 8

LAYHER EVENT SYSTEMS

2 Event stages Page 8

2 Benches, bucket seats, tip-up seats Page 22

Speedyscaf System

ef. o. 8102.256

Allround Scaffolding System

ef. o. 8116.252

Scaffolding Accessories

ef. o. 8103.254

Protective Systems

ef. o. 8121.253

Event Systems

ef. o. 8111.227

Rolling Towers Ladders and Stairs

ef. o. 8118.225

LAYHER SPEEDYSCAF SYSTEMCATALOGUE

®

Edition 04.2015Ref. No. 8102.256


LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE

®

Edition 04.2015Ref. No. 8116.252


Edition 04.2015Ref. No. 8111.227


LAYHER EVENT SYSTEMSCATALOGUE

LAYHER PROTECTIVE SYSTEMSCATALOGUE

Edition 04.2015Ref. No. 8121.253


LAYHER SCAFFOLDING ACCESSORIESCATALOGUE

Edition 04.2015e o

Quality management certified accordingto by German TÜV-CERT

Rolling Towers

LAYHER LADDERS & STAIRSLAYHER ROLLING TOWERS

CATALOGUE

Edition 04.2015Ref. No. 8118.225


T E A E P T A E A ATA E AT A A E

2 Leg insert platforms Page 16

EN_PL_Event_2015.indd 4 10.03.2015 08:06:42

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



5

2 Event stands Page 18

2 FOH system Page 32

CONTENTS2 EVENT SYSTEMS

2 E I I - A I AI 6

2 EVENT STAGES AND PODIA 8

2 A I P E T 10

2 A AI A TAI A 12

2 I E A A E 14

2 E I E T P AT 16

2 EVENT STANDS 18

2 A I P E T A A AI 20

2 E E A ET EAT 22

2 TRUSS SYSTEMS 24

2 A T TE 26

2 TEE T TE 30

2 FOH TOWER KIT SYSTEM 32

2 TE 34

2 A A A I 34

2 INDEX 36

All dimensions and weights are guideline values. ubject to technical modification.

teel parts are galvanized according to E I 4042 and E 12811-2.

ur deliveries shall be made exclusively in accordance with our currently valid eneral Terms of Sale. These include the following provisions: The place of performance is Gueglingen-Eibensbach. Title to the delivered goods shall be retained until full payment has been made.

Please re uest the specific instructions for assembly and use when ordering. Protected by copyright. ot to be reproduced, either in whole or in part. isprints and errors excepted.

Rolling Towers Ladders and Stairs

ef. o. 8118.225

EN_PL_Event_2015.indd 5 10.03.2015 08:06:42

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



6

Event Systems


®

Edition 04.2015Ref. No. 8116.252


Module EV 86 EV 86 EV 86Q EV 100Metric*

EV 104

Bay 2.07 x 2.57 m 2.07 x 2.57 m 2.57 x 2.57 m 2.00 x 2.00 m 2.07 x 2.07 m

eck type Event deck Event deck Event deck Event deck Event deck

eck size 0.86 x 2.07 m 0.86 x 2.07 m 0.86 x 2.57 m 1.00 x 2.00 m 1.04 x 2.07 m

ecks per bay 3 3 3 2 2

Support element Event transom Event transom Event transom Event transom Event transom

Support element length 2.57 m 2.57 m 2.57 m 2.00 m 2.07 m

Crosspiece support – required – – –

Perm. load capacity 5.0 k /m² 7.5 k /m² 5.0 k /m² 7.5 k /m² 7.5 k /m²

LAYHER STAGES Layher stages are just as suitable for use inside halls and marquees as use out -

doors. The components make up a construction kit allowing the building of a

small podium for fashion shows or bands, or a giant concert stage. All parts

are weatherproof, thanks to the use of aluminium, hot-dip galvanized steel and

coated plywood panels. On uneven surfaces, fast and easy adaptability of the

Allround stage to the lie of the land is a particular advantage. The permissible

loading capacity of the podium surface is up to 7.5 k /m². The height can,

depending on the structural strength, be up to 10 m. Meeting of the guidelines

for temporary structures with the design loads as per I 4112 is verified by

inspection books issued by the competent authority.

DECISION-MAKING AIDS

LAYHER STAGE AND STAND SYSTEMS

* Further metric components, see catalogue Allround Scaffolding.

EN_PL_Event_2015.indd 6 10.03.2015 08:06:44

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



7

Seating stand EV 86 16 EV 86 25 EV 86 33 EV 100 25Metric*

EV 104 25

Step width 0.857 m 0.857 m 0.857 m 1.00 m 1.036 m

Step height 0.166 m 0.25 m 0.333 m 0.25 m 0.25 m

iser angle egree 11° 16.3° 21.1° 14° 13.6°

iser angle 19.4 29.2 38.6 24.9 24.2

Standard dimension 2.57 x 2.07 m 2.57 x 2.07 m 2.57 x 2.07 m 2.00 x 2.00 m 2.07 x 2.07 m

Loose seating possible possible possible recommended recommended

Permanently fitted benches recommended recommended recommended possible possible

Seating stand EV 75 16 EV 75 25 EV 75 33

Step width 0.75 m 0.75 m 0.75 m

Step height 0.16 m 0.25 m 0.33 m

iser angle egree 12.5° 18.4° 24°

iser angle 22.2 % 33.3 % 44.4 %

Standard dimension 2.25 x 2.00 m 2.25 x 2.00 m 2.25 x 2.00 m

Loose seating not possible not possible not possible

Permanently fitted benches possible possible possible

Bucket seats not possible not possible not possible

Tip-up seats recommended recommended recommended

LAYHER STANDSThe most important characteristics of Layher seating stands are: sturdy

material, sound workmanship, long service life, rapid assembly at changing

locations, and low transport volume. The individual parts are easy to assemble

and lightweight, so that they can be installed manually. Please refer to our

tables in this connection. Thanks to the modular design, it is possible to adapt

the stand to the local conditions and to plan it in accordance with German

regulations governing public assembly places.

DECISION-MAKING AIDS

EN_PL_Event_2015.indd 7 10.03.2015 08:06:52

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



8

Event stages and podia

LAYHER STAGES AND PODIA – EASIER, QUICKER AND SAFER BY USING THE MODULAR LAYHER SYSTEM

o restrictions imposed on performances, no limits set in the dimensions

and fittings, no concessions made to the location

Layher podiums and stages always provide a safe play performance

area that s exactly what s needed. eries manufacture and high delivery

readiness are our way to help you cut costs and achieve economic

success; and tailor-made special solutions whenever necessary are our

strengths.

LAYHER EVENT STAGES AND PODIA

2 Basic unit

an be expanded as re uired, variable floor plans.

2 E panda le

Caters for requirements with a variety of roof and support systems.

2 Allround base

High load-bearing capacity, rapid assembly and dismantling.

2 Practically-minded design

Strong connector technology, ergonomic handling, low-wear

aluminium parts, corrosion-proof thanks to hot-dip galvanisation,

space-saving storage.

T E E E IT T

EN_PL_Event_2015.indd 8 10.03.2015 08:06:56

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



9

LAYHER STAGES AND PODIA – EASIER, QUICKER AND SAFER BY USING THE MODULAR LAYHER SYSTEM

EN_PL_Event_2015.indd 9 10.03.2015 08:07:03

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



10

Event stages – basic components

Event stages – basic components Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 1 Event deck T10Aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 20.86 x 2.57 32.3 10 5402.191 W 2

2 2 Event deck T10, square for equalizing bays,aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 1.00 14.3 10 5402.175 W 21.04 x 1.04 19.3 10 5402.185 W 2

3 3 Plastic corneras spare part for Event deck T10 (Pos. 1 and 2)

3.4 50 V 6494.101 W 2 2 2 2

4 4 Event transom 0.86 6.1 60 5400.072 W 21.00 6.4 60 5400.010 W 21.04 6.6 60 5400.020 W 21.71 10.0 60 5400.071 W 2

5 2.00 11.4 60 5400.040 W 22.07 12.0 60 5400.050 W 22.57 14.6 60 5400.070 W 2 2

6 7 5 Transom supportincreases permissible load on the E 86 system

2.57 x 0.50 21.2 40 5400.100 W 2

6 Tension clasp for transom 0.16 0.1 50 V 5403.514 W 2 2 2 2

8 9 10 7 Square half-coupler 1.4 5403.510 W 2 2 2 2

8 Base plate 20max. spindle travel 10 cm

0.20 2.3 200 5602.020 W 2 2 2 2

11


0.40 2.9 200 4001.040 W 2 2 2 2

12 13 14 10 Base plate 60, solid, without lockmax. spindle travel 41 cm

0.60 6.7 200 5602.060 W 2 2 2 2

11 Rubber pad for base platefor slip-reduction on solid grounds like concrete, asphalt, stone or timber. Protects sensitive deckings from damages.

0.20 x 0.20 0.4 4000.500 W 2 2 2 2

12 Base collar, short 0.17 1.1 250 5601.000 W 2 2 2 2

13 Standard, 0.67 m, with 2 rosettes, without spigotwith integrated base collar

0.67 3.6 200 2604.066 W 2 2 2 2


1.17 6.1 28 2604.116 W 2 2 2 2


®

Edition 04.2015Ref. No. 8116.252


6

14For further base plates, see

caffolding Accessories atalogue

or all further Allround components, see Allround caffolding ystem atalogue

The Event decks 1 and 2 up to 2.07 m in length are desi-gned for a load of 7.5 k /m². The Event deck 2.57 m without transom support can bear 5 k /m². The removable Plastic corners 3 ensure that the vertical tubes can pass through. The coated plywood board is braced with alu minium rungs. The 18 cm high Event transom 4 of aluminium section with connecting wedge heads of galvanised steel holds the Event decks. The load-bearing capacity of the 2.57 m long Event crosspiece can be increased by reinforcement with the Transom support 5 from 5 k /m² to 7.5 k /m².

The Tension clasp 6 of spring steel connects the Event deck to the Event transom and acts as a lock against lift-off.

A gap-free podium surface is assured by the Square half-coupler 7 to be fitted to the edge of the podium to prevent shifting.

The rubber pad 11 must not be used as load-distributing base. It minimizes slippery of the structure.

The Standard 0.67 m 13 and Standard 1.17 m 14 are used for podiums with heights of 0.80 m or 1.30 m and obviate the need for the base collar. The assembly runs faster and ballasting can be placed on the lowest scaffolding level.

With the Base plate 20 8 and the Base collars 12 very small heights, as encountered in trade fair and hall construction can be achieved. The Base plate 40 9 and the Base plate 60, solid 10 are used especially in stand construction and permit increased height adjustment.

The substructure of the Layher Event systems is created from Layher Allround scaffolding. Please refer to the Allround Scaffolding System Catalogue for the components required.

Event deck

Tension clasp

Event transom

EN_PL_Event_2015.indd 10 10.03.2015 08:07:10

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



11

WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit

Event stages – basic components Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 1 Event deck T10Aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 20.86 x 2.57 32.3 10 5402.191 W 2

2 2 Event deck T10, square for equalizing bays,aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 1.00 14.3 10 5402.175 W 21.04 x 1.04 19.3 10 5402.185 W 2

3 3 Plastic corneras spare part for Event deck T10 (Pos. 1 and 2)

3.4 50 V 6494.101 W 2 2 2 2

4 4 Event transom 0.86 6.1 60 5400.072 W 21.00 6.4 60 5400.010 W 21.04 6.6 60 5400.020 W 21.71 10.0 60 5400.071 W 2

5 2.00 11.4 60 5400.040 W 22.07 12.0 60 5400.050 W 22.57 14.6 60 5400.070 W 2 2

6 7 5 Transom supportincreases permissible load on the E 86 system

2.57 x 0.50 21.2 40 5400.100 W 2

6 Tension clasp for transom 0.16 0.1 50 V 5403.514 W 2 2 2 2

8 9 10 7 Square half-coupler 1.4 5403.510 W 2 2 2 2


0.20 2.3 200 5602.020 W 2 2 2 2

11


0.40 2.9 200 4001.040 W 2 2 2 2

12 13 14 10 Base plate 60, solid, without lockmax. spindle travel 41 cm

0.60 6.7 200 5602.060 W 2 2 2 2

11 Rubber pad for base platefor slip-reduction on solid grounds like concrete, asphalt, stone or timber. Protects sensitive deckings from damages.

0.20 x 0.20 0.4 4000.500 W 2 2 2 2

12 Base collar, short 0.17 1.1 250 5601.000 W 2 2 2 2


0.67 3.6 200 2604.066 W 2 2 2 2


1.17 6.1 28 2604.116 W 2 2 2 2

EN_PL_Event_2015.indd 11 10.03.2015 08:07:10

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



12

Event systems – guardrails and stairways for stages

Event systems – guardrails and stairways for stages Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 4 5 1 Guardrail post for podium 1.64 13.8 100 5406.000 W 2 2 2 2

2 Handrail T13handrail height 1.00 m

1.00 7.9 40 5417.100 P 21.04 8.1 40 5417.104 P 22.00 15.0 40 5417.200 P 22.07 15.4 40 5417.207 W 2 22.57 18.7 40 5417.257 P 2 2

3 Guardrail with child safety feature T12Guardrail height 1.10 m.Connection elements height adjustable for use with Event or scaffolding decks.

1.00 19.8 25 5409.100 W 21.04 20.0 25 5409.104 W 21.57 25.8 25 5409.157 W 22.00 30.5 25 5409.200 W 22.07 30.8 25 5409.207 W 2 22.57 35.8 25 5409.257 W 2 2

2 3 4 Stairway guardrail 750 with child safety featurefor stairway stringer Pos. 5

1.00 x 1.57 22.0 25 2616.106 W 2 2 2 2

5 U-Stairway stringer 750 with half-couplerwith 5 steps

1.00 x 1.57 28.0 40 2638.003 W 2 2 2 2

6 Stringer for modular stairway 1-step 0.30 2.4 50 5407.001 W 2 2 2 22-step 0.60 5.5 50 5407.002 W 2 2 2 23-step 0.90 8.0 20 5407.003 W 2 2 2 2

7 Guardrail for modular stairway 1-step 0.30 x 1.10 6.5 40 5407.011 W 2 2 2 22-step 0.60 x 1.10 14.0 25 5407.012 W 2 2 2 23-step 0.90 x 1.10 16.0 25 5407.013 W 2 2 2 2

8 Base collar for modular stairway, 0.26 mwith spigot

0.26 2.0 450 5407.021 W 2 2 2 2

9 Standard for modular stairway, 0.59 mwith spigot

0.59 3.1 250 5407.022 W 2 2 2 2

10 O-ledger LW, 0.90 m 0.90 3.4 50 2601.090 W 2 2 2 2

11 Lift-off preventer, with bolt 0.29 0.4 300 5407.030 W 2 2 2 2


®

Edition 04.2015Ref. No. 8116.252


Riser s = 16.00 cmTread a = 31.80 cm

ndercut u 0.20 cm

Side protection of the stage is provided by Handrails 2 or Guardrails with child safety features 3. The stairway stringer 5 fits exactly to the height of the Event decks. Thus it is always as top step. epending on the podium height, the stairway can be extended with different stairway stringers.

6

7

8

911

10

Notice: In combination of different stairway stringers, the different stairway dimension must be pointed out. For further information, please see catalogue Allround Scaffolding..

odi eig t Stairway: 2638.003 + 2638.008



odi eig t Stairway: 2638.003

The artist entry to the stage is via the modular stairway. The construction kit comprises: Stringer for modular stairway, 1, 2 and 3 steps 6, Base collar 0.26 m 8 and O-ledger 0.90 m 10. If required, stairway guardrails are attached. The bolts needed for guardrail assembly are included with every stairway guardrail. The guardrails are not suitable for public areas.

EN_PL_Event_2015.indd 12 10.03.2015 08:07:20

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



13


Event systems – guardrails and stairways for stages Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 4 5 1 Guardrail post for podium 1.64 13.8 100 5406.000 W 2 2 2 2

2 Handrail T13handrail height 1.00 m

1.00 7.9 40 5417.100 P 21.04 8.1 40 5417.104 P 22.00 15.0 40 5417.200 P 22.07 15.4 40 5417.207 W 2 22.57 18.7 40 5417.257 P 2 2

3 Guardrail with child safety feature T12Guardrail height 1.10 m.Connection elements height adjustable for use with Event or scaffolding decks.

1.00 19.8 25 5409.100 W 21.04 20.0 25 5409.104 W 21.57 25.8 25 5409.157 W 22.00 30.5 25 5409.200 W 22.07 30.8 25 5409.207 W 2 22.57 35.8 25 5409.257 W 2 2

2 3 4 Stairway guardrail 750 with child safety featurefor stairway stringer Pos. 5

1.00 x 1.57 22.0 25 2616.106 W 2 2 2 2

5 U-Stairway stringer 750 with half-couplerwith 5 steps

1.00 x 1.57 28.0 40 2638.003 W 2 2 2 2

6 Stringer for modular stairway 1-step 0.30 2.4 50 5407.001 W 2 2 2 22-step 0.60 5.5 50 5407.002 W 2 2 2 23-step 0.90 8.0 20 5407.003 W 2 2 2 2

7 Guardrail for modular stairway 1-step 0.30 x 1.10 6.5 40 5407.011 W 2 2 2 22-step 0.60 x 1.10 14.0 25 5407.012 W 2 2 2 23-step 0.90 x 1.10 16.0 25 5407.013 W 2 2 2 2

8 Base collar for modular stairway, 0.26 mwith spigot

0.26 2.0 450 5407.021 W 2 2 2 2

9 Standard for modular stairway, 0.59 mwith spigot

0.59 3.1 250 5407.022 W 2 2 2 2

10 O-ledger LW, 0.90 m 0.90 3.4 50 2601.090 W 2 2 2 2

11 Lift-off preventer, with bolt 0.29 0.4 300 5407.030 W 2 2 2 2

For further stairways and access assemblies, see Allround Scaffolding System Catalogue.

EN_PL_Event_2015.indd 13 10.03.2015 08:07:20

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



14

Universal base Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 10

0EV

104

1 1 Base beam,steel, hot-dip galvanized

0.86 13.0 5431.086 P 21.00 15.5 5431.100 P 21.04 16.1 5431.104 P 22.00 32.5 5431.200 P 22.07 33.7 5431.207 P 2 2

2 2 Base lattice beamsteel, hot-dip galvanized

0.86 x 0.50 38.2 5432.086 P 21.00 x 0.50 38.5 5432.100 P 21.04 x 0.50 39.1 5432.104 P 22.00 x 0.50 76.0 5432.200 P 22.07 x 0.50 76.7 5432.207 P 2 2

3 3 Truss-Transomsteel, hot-dip galvanized

0.86 27.8 5433.086 P 21.00 28.9 5433.100 P 21.04 29.0 5433.104 P 22.00 47.3 5433.200 P 22.07 48.6 5433.207 P 2 2

4 4 Base plate type 1steel, hot-dip galvanized,for 30 and 40 support with 32 drillings

0.41 x 0.41 25.0 5434.003 P 2 2 2

5 5 Base plate type 2steel, hot-dip galvanized,for 30 and 40 supportwith 16 drillings

0.41 x 0.41 25.0 5434.002 P 2 2 2

6 6 Special bolt with nut 53 x 34

16 x 60 2.0 5434.012 W 2 2 2

Universal base

Since the release of the new guidelines for temporary structures (E 13814), the use of stage roofings ist not possible anymore without combining it with a podium of Layher.

With the universal base, you can connect roofs efficiently to the ayher podium. The speciality of this solution is, that it is possible to adjust almost every position of the supports contiuously.

If the base should be used for larger roofings, depending on the load bearing capacity, an additional support could be necessary.

2 ead weight of the podium, can be charged thus lower ballasting.

2 Forces, emitting by linkage, can be transmitted to the podium – thus lower ballasting.

2 igher headroom, thanks to fixation points on deck level.

2 Quick assembly of the podium with the universal base and our well-known Allround caffolding.

2 Topographic problems at the place of action, can be solved easily.

2 Complete system, with stairways, ramps and guardrails available.

EN_PL_Event_2015.indd 14 10.03.2015 08:07:24

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



15


Universal base Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 10

0EV

104

1 1 Base beam,steel, hot-dip galvanized

0.86 13.0 5431.086 P 21.00 15.5 5431.100 P 21.04 16.1 5431.104 P 22.00 32.5 5431.200 P 22.07 33.7 5431.207 P 2 2

2 2 Base lattice beamsteel, hot-dip galvanized

0.86 x 0.50 38.2 5432.086 P 21.00 x 0.50 38.5 5432.100 P 21.04 x 0.50 39.1 5432.104 P 22.00 x 0.50 76.0 5432.200 P 22.07 x 0.50 76.7 5432.207 P 2 2

3 3 Truss-Transomsteel, hot-dip galvanized

0.86 27.8 5433.086 P 21.00 28.9 5433.100 P 21.04 29.0 5433.104 P 22.00 47.3 5433.200 P 22.07 48.6 5433.207 P 2 2

4 4 Base plate type 1steel, hot-dip galvanized,for 30 and 40 support with 32 drillings

0.41 x 0.41 25.0 5434.003 P 2 2 2

5 5 Base plate type 2steel, hot-dip galvanized,for 30 and 40 supportwith 16 drillings

0.41 x 0.41 25.0 5434.002 P 2 2 2

6 6 Special bolt with nut 53 x 34

16 x 60 2.0 5434.012 W 2 2 2

EN_PL_Event_2015.indd 15 10.03.2015 08:07:24

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



16

Event systems – leg insert platforms

Event systems – leg insert platforms Pos. Description DimensionsL/H x W [m]

Weight approx. [kg]

PU[pcs.]

Ref. No.

EV 86

EV 10

0EV

104

1 1 Event deck T10Aluminium frame. coated plywood , detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 2

2 2 Event deck T10, squarefor equalizing bays, aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 1.00 14.3 10 5402.175 W 2

1.04 x 1.04 19.3 10 5402.185 W 2

3 4 3 Clamp T10for coupling Event decks T7 / T10 (Pos. 1)

0.4 40 5403.506 W 2 2 2

4 Leg insert supportfor Event deck T10 (Pos. 1), incl. 4 screws, die-cast zinc, for holding Pos. 4

1.2 5402.010 W 2 2 2

5 5 Alu leg insert Q60 T13 with plastic slider

0.20 1.1 4 V 5415.021 P 2 2 2

0.40 2.2 4 V 5415.041 P 2 2 2

0.60 3.4 4 V 5415.061 P 2 2 2

0.80 4.5 4 V 5415.081 W 2 2 2

1.00 5.6 4 V 5415.101 W 2 2 2

7 6 Hinged foot for retrofit, with non-slip floor-protecting rubber underlay, Adjusting range 40 mm

0.3 6494.647 P 2 2 2

6 7 Insert leg connector, 2-wayfor aluminium insert legs Q60

1.1 5407.061 W 2 2 2

Leg insert supports 4 can be fitted into the corners of the T10 Event decks. These parts are fastened with two bolts, which are supplied. The insert leg holders are used to hold the Q60 aluminium legs 5. Insert leg connectors 7 are used to connect the insert legs to one another. Clamps 3 for Event decks connect the aluminium frames of the platforms to one another resulting in a smooth transition even under load.

The insert-leg kit is the ideal complement to the Layher Event System. This design is very economical for smaller platforms up to 1 m height. The assembly time and number of parts are lower than using an Allround support structure.

The permissible load of the platforms is 750 kg/m².Ideal for use in halls and rooms with sensitive floor coverings, thanks to the floor protecting and non-slip rubber pads, which are already integrated into the height-adjustable hinged feet 6.

EN_PL_Event_2015.indd 16 10.03.2015 11:50:17

PA

0101

7422

_Kat

_Eve

nt_E

N_K

OR

R16

.pdf

PA

0101

7422

_Kat

_Eve

nt_E

N_K

OR

R16

.pdf

PA01017422_Kat_Event_EN_KORR16.pdf

PA01017422_Kat_Event_EN_KORR16.pdf

17


Event systems – leg insert platforms Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 10

0EV

104

1 1 Event deck T10Aluminium frame. coated plywood , detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 2.00 28.3 10 5402.170 W 21.04 x 2.07 36.0 10 5402.180 W 20.86 x 2.07 27.5 10 5402.190 W 2

2 2 Event deck T10, squarefor equalizing bays, aluminium frame, coated plywood, detachable plastic corners, threaded inserts for holding insert leg holders

1.00 x 1.00 14.3 10 5402.175 W 2

1.04 x 1.04 19.3 10 5402.185 W 2

3 4 3 Clamp T10for coupling Event decks T7 / T10 (Pos. 1)

0.4 40 5403.506 W 2 2 2

4 Leg insert supportfor Event deck T10 (Pos. 1), incl. 4 screws, die-cast zinc, for holding Pos. 4

1.2 5402.010 W 2 2 2

5 5 Alu leg insert Q60 T13 with plastic slider

0.20 1.1 4 V 5415.021 P 2 2 2

0.40 2.2 4 V 5415.041 P 2 2 2

0.60 3.4 4 V 5415.061 P 2 2 2

0.80 4.5 4 V 5415.081 W 2 2 2

1.00 5.6 4 V 5415.101 W 2 2 2

7 6 Hinged foot for retrofit, with non-slip floor-protecting rubber underlay, Adjusting range 40 mm

0.3 6494.647 P 2 2 2

6 7 Insert leg connector, 2-wayfor aluminium insert legs Q60

1.1 5407.061 W 2 2 2

EN_PL_Event_2015.indd 17 10.03.2015 08:07:26

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



18

Event stands

FOR GETTING THE CROWD’S MONEY’S WORTH

o restrictions on comfort, no limits on dimensions and e uipment,

no concessions to the location ayher stands are always an excellent

“observation point”, just as required.

The Layher Event system: Stands for sitting and standing, all over the

world and meeting client requirements. Series manufacture and high

delivery readiness are our way to help you cut costs and achieve

economic success; and tailor-made special solutions whenever necessary

are our strengths.

The whole ayher Event- ystem bases on the proven Allround caffolding

System. Thus makes investions even more economical, because the

material can be used for lots of different kinds of use.

LAYHER EVENT STANDS

2 Standard solutions

Series material, rapid availability.

2 Substructure Allround

igh load-bearing capacity, rapid erection and dismantling, flexible

assembly, choice of accessories.

2 Handy components

Easy to transport and store, palletizable.

2 Special design

for individualized problem solutions.

T E E E IT T

EN_PL_Event_2015.indd 18 10.03.2015 08:07:34

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



19

EN_PL_Event_2015.indd 19 10.03.2015 08:07:42

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



20

Event stands – basic components and guardrails for stands

Event stands – basic components and guardrails for stands Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 2 1 Stand element1-step

1.00 x 0.25 6.6 40 5401.010 W 21.04 x 0.25 6.7 40 5401.020 W 2

2 Stand element2-step

1.71 x 0.33 10.5 30 5401.030 W 2 2

4 3 5 3 Intermediate step0.30 x 0.12 x , with 2 half coupler

L = 1.00 8.4 5402.110 P 2 2L = 1.25 10.5 5402.130 P 2 2

4 Guardrail standard, 0.96 mwith bottom mounted spigot and 2 cutaway rosettes

0.96 5.5 20 5405.045 W 2 2 2 2

6

5 Lift-off preventer for stand element

0.10 0.05 5403.501 W 2 2 2 2

7 6 Lift-off preventer for steel decks 0.86 1.6 5403.007 W 2 2

olt 10 70 with nut 3.5 50 V 5403.009 W 2 2

7 Steel deck support 0.10 0.4 5403.006 W 2 2

8 Side guardrail T122-step

2.00 x 1.10 32.2 25 5410.201 P 22.07 x 1.10 32.5 25 5410.204 W 2


2.57 x 1.10 35.2 25 5410.301 P 2 2

10 Side end guardrail T122-step

2.00 x 1.10 30.4 25 5410.202 P 22.07 x 1.10 30.7 25 5410.206 W 2


2.57 x 1.10 34.3 25 5410.302 P 2 2

12 Corner guardrail, top Steel

1.10 x 0.28 11.2 40 5410.303 W 2 2 2 2

EV 86, 166 mmEV 100 EV 104, 250 mm

EV 100 EV 104

The Stand element, 1-step 1 with a standard rise of 250 mm is used for the Event systems E 100 and E 104.

The Stand element, 2-step 2 is used for the Event system E 86.

When Event decks are used, the Lock against lift-off 5 is required to prevent the Event decks from lifting off and tilting.

Alternatively, conventional steel decks can also be used, which is to be recommended especially for outdoor events. Here the ock against li t o T 86 6 and the Steel deck support 7 are used.

The Guardrail standard 0.96 m 4 with the bottom mounted spigot, is used to guide the Allround standards out of the substructure. For side guardrails, however, this standard must be additionally reinforced.

The components shown here are showcase. For the different stand variants, showing in table on page 7, further stand components are available. These are stand elements, intermediate steps, guardrails and guardrail posts for each type of stand.

Side guardrails and guardrail posts EV 100/EV 104, rise 250 mm

Guardrail posts are dependent on the stand system – upon request

11

12

9

10

12

8

ide guardrails and guardrail posts EV 86, rise 166 mm

EN_PL_Event_2015.indd 20 10.03.2015 08:07:47

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



21


Event stands – basic components and guardrails for stands Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 2 1 Stand element1-step

1.00 x 0.25 6.6 40 5401.010 W 21.04 x 0.25 6.7 40 5401.020 W 2

2 Stand element2-step

1.71 x 0.33 10.5 30 5401.030 W 2 2

4 3 5 3 Intermediate step0.30 x 0.12 x , with 2 half coupler

L = 1.00 8.4 5402.110 P 2 2L = 1.25 10.5 5402.130 P 2 2

4 Guardrail standard, 0.96 mwith bottom mounted spigot and 2 cutaway rosettes

0.96 5.5 20 5405.045 W 2 2 2 2

6

5 Lift-off preventer for stand element

0.10 0.05 5403.501 W 2 2 2 2

7 6 Lift-off preventer for steel decks 0.86 1.6 5403.007 W 2 2

olt 10 70 with nut 3.5 50 V 5403.009 W 2 2

7 Steel deck support 0.10 0.4 5403.006 W 2 2


2.00 x 1.10 32.2 25 5410.201 P 22.07 x 1.10 32.5 25 5410.204 W 2


2.57 x 1.10 35.2 25 5410.301 P 2 2


2.00 x 1.10 30.4 25 5410.202 P 22.07 x 1.10 30.7 25 5410.206 W 2


2.57 x 1.10 34.3 25 5410.302 P 2 2

12 Corner guardrail, top Steel

1.10 x 0.28 11.2 40 5410.303 W 2 2 2 2

EN_PL_Event_2015.indd 21 10.03.2015 08:07:47

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



22

Event stands – benches and bucket seats

Event stands – benches and bucket seats Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 2 1 Benchanodised aluminium, coated plywood

1.57 x 0.30 7.2 5623.157 P 2 22.00 x 0.30 9.4 60 5623.200 W 22.07 x 0.30 9.5 60 5623.207 W 2 22.57 x 0.30 11.7 60 5623.257 W 2

2 Bench endanodised aluminium, coated plywood

0.06 x 0.30 0.5 5624.000 W 2 2 2 2

3a3b3c3d3e

3a Novanta bucket seat, blue-protected and flame-retardant

0.40 x 0.43 1.7 120 5408.021 W 2 2 2 2

3b3c

Plug, left, bluePlug, right, blue

0.2 20 V 5408.026 W 2 2 2 20.2 20 V 5408.027 W 2 2 2 2

3d Number plate, w/o lettering, white 0.2 20 V 5408.025 W 2 2 2 2

3e Assembly-Set for 20 bucket seatsexisting of 40 bolts 8 x 40, 40 nuts and 40 washers

1.2 120 5408.007 W

4 5 4 Bench, with holesfor ovanta bucket seats

1.57 x 0.30 7.2 60 5408.157 P 2 22.00 x 0.30 9.4 60 5408.200 P 22.07 x 0.30 9.5 60 5408.207 W 2 22.57 x 0.30 11.7 60 5408.257 W 2

5 Allround wedgeSteel, for securing bench, without rivets

0.14 3.3 25 V 6494.916 2 2 2 213.0 100 V 6494.918 W 2 2 2 2

6 7 8 6 Allround wedge, short, 90 mmwithout holes, for securing bench at edge of stand

0.09 1.0 10 V 6494.965 W 2 2 2 2

9 10 7 Bench adaptor for rise 16,70 cmfor rise 25,00 cm

0.42 3.7 350 5406.010 W 2 20.34 3.4 350 5406.015 W 2 2

8 Seat support with rosettefor bottom rows

0.34 4.0 300 5619.000 W 2 2 2 2

9 Tip-up seat, blue-protected and flame-retardant

0.42 x 0.19 3.2 on request 2 2 2 2

10 Aluminium frame for tip-up seatssuitable for all inclinations

1.04 5.8 on request 2 2 2 21.50 7.4 on request 2 2 2 21.57 7.6 on request 2 2 2 22.00 9.4 on request 2 2 2 22.07 9.7 on request 2 2 2 2112.57 11.8 on request 2 2 2 2

11 Adapter for frame for tip-up seats suitable for all inclinations

0.19 x 0.10 3.0 on request 2 2 2 2

1 2

ou can choose the seating to suit the application, but also to suit your specific conditions. There is a choice of benches, bucket seats and tip-up seats.

The Bench 1 is 0.30 m wide and comprises anodised aluminium stiles and smooth-coated plywood.

Benches are secured with wedges: Short wedges 6 are needed at the edge of the stand. Bench ends 2 are fitted at the access to the stand.

Novanta bucket seats 3a can be fastened to the benches. We recommend benches with predrilled holes here. The standard ovanta bucket seats are dark blue, -protected and flame-retardant.

The assembly material comprises per seat:2 bolts with square neck2 washers2 nuts1 plug, left1 plug, right

umber plate without lettering, white.

Alternatively, your own chairs can be placed on the Event stand.

The first row of seat is formed by the Seat support with rosette 8.

BB

EN_PL_Event_2015.indd 22 10.03.2015 08:07:52

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



23


Event stands – benches and bucket seats Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 86

EV 86

QEV

100

EV 10

4

1 2 1 Benchanodised aluminium, coated plywood

1.57 x 0.30 7.2 5623.157 P 2 22.00 x 0.30 9.4 60 5623.200 W 22.07 x 0.30 9.5 60 5623.207 W 2 22.57 x 0.30 11.7 60 5623.257 W 2

2 Bench endanodised aluminium, coated plywood

0.06 x 0.30 0.5 5624.000 W 2 2 2 2

3a3b3c3d3e

3a Novanta bucket seat, blue-protected and flame-retardant

0.40 x 0.43 1.7 120 5408.021 W 2 2 2 2

3b3c

Plug, left, bluePlug, right, blue

0.2 20 V 5408.026 W 2 2 2 20.2 20 V 5408.027 W 2 2 2 2

3d Number plate, w/o lettering, white 0.2 20 V 5408.025 W 2 2 2 2

3e Assembly-Set for 20 bucket seatsexisting of 40 bolts 8 x 40, 40 nuts and 40 washers

1.2 120 5408.007 W

4 5 4 Bench, with holesfor ovanta bucket seats

1.57 x 0.30 7.2 60 5408.157 P 2 22.00 x 0.30 9.4 60 5408.200 P 22.07 x 0.30 9.5 60 5408.207 W 2 22.57 x 0.30 11.7 60 5408.257 W 2

5 Allround wedgeSteel, for securing bench, without rivets

0.14 3.3 25 V 6494.916 2 2 2 213.0 100 V 6494.918 W 2 2 2 2

6 7 8 6 Allround wedge, short, 90 mmwithout holes, for securing bench at edge of stand

0.09 1.0 10 V 6494.965 W 2 2 2 2

9 10 7 Bench adaptor for rise 16,70 cmfor rise 25,00 cm

0.42 3.7 350 5406.010 W 2 20.34 3.4 350 5406.015 W 2 2

8 Seat support with rosettefor bottom rows

0.34 4.0 300 5619.000 W 2 2 2 2

9 Tip-up seat, blue-protected and flame-retardant

0.42 x 0.19 3.2 on request 2 2 2 2

10 Aluminium frame for tip-up seatssuitable for all inclinations

1.04 5.8 on request 2 2 2 21.50 7.4 on request 2 2 2 21.57 7.6 on request 2 2 2 22.00 9.4 on request 2 2 2 22.07 9.7 on request 2 2 2 2112.57 11.8 on request 2 2 2 2

11 Adapter for frame for tip-up seats suitable for all inclinations

0.19 x 0.10 3.0 on request 2 2 2 2

EN_PL_Event_2015.indd 23 10.03.2015 08:07:53

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



24

Truss systems

VISUALLY ATTRACTIVE, LIGHTWEIGHT AND STABLE

The Layher Truss system contains 3-chord and 4-chord transoms of

aluminium. They are available as H30 and H40 series.

The Layher Truss system is developed for lightweight to intermediate-

heavy structures, which are mainly used in the exhibition sector. They are

characterised by very high stability, compactness, versatility and very low

operating weight. The installation is very simple, thanks to the direction-

independent framework.

LAYHER TRUSS SYSTEMS

2 a imum load earing capacit

Outstanding load-bearing values yet a low degree of sag.

2 Compatibility

Layher truss systems are compatible both with many other truss

systems and with ayher Allround e uipment.

2 a imum ualit

urable and value stable thanks to highest production uality.

T E E E IT T

EN_PL_Event_2015.indd 24 10.03.2015 08:07:58

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



25

T E E E IT T

ENORMOUSLY BEARING. HUGE SPANS. FOR DIFFERENT SCOPES OF APPLICATION

Constructions, which are made to carry high loads and however must be

easy and fast to assembly, need well-thought and strong components.

Layher offers with the new steel truss the right tools for that challenge.

LAYHER STEEL TRUSS SYSTEMS

2 Attractive outer dimensions.

2 High load-bearing capacity.

2 Large spans.

2 Quick assembly thanks to well-known fork-connectors.

EN_PL_Event_2015.indd 25 10.03.2015 08:08:05

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



26

Alu truss systems

Order the catalogue

rolling towers and ladders

LAYHER LADDERS & STAIRSLAYHER ROLLING TOWERS

CATALOGUE

Edition 04.2015Ref. No. 8118.225


Alu truss systems Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

1 1 Truss H30D, aluminium straight, 3-chord, external dimension 287 mm

0.25 x 0.26 x 0.29 2.0 5718.025 P0.50 x 0.26 x 0.29 3.0 5718.050 P0.71 x 0.26 x 0.29 3.9 5718.071 P0.75 x 0.26 x 0.29 4.1 5718.075 P1.00 x 0.26 x 0.29 5.1 5718.100 P1.50 x 0.26 x 0.29 7.4 5718.150 P2.00 x 0.26 x 0.29 9.5 5718.200 P2.50 x 0.26 x 0.29 11.7 5718.250 P3.00 x 0.26 x 0.29 13.8 5718.300 P3.50 x 0.26 x 0.29 15.6 5718.350 P4.00 x 0.26 x 0.29 22.3 5718.400 P4.50 x 0.26 x 0.29 27.5 5718.450 P5.00 x 0.26 x 0.29 32.5 5718.500 P

2 2 Truss H30V, aluminiumstraight, 4-chord, external dimension 287 mm


3 3 Truss H40D, aluminiumstraight, 3-chord, external dimension 387 mm




5a 5b 5c 5d 5abcdefgh

Truss corners H30D, aluminium2-way 90 degree2-way 90 degree2-way 90 degree3-way 90 degree3-way 90 degree4-way T-piece4-way T-piece4-way cross

0.50 x 0.30 x 0.50 3.9 5720.003 P0.50 x 0.30 x 0.50 3.8 5720.006 P0.50 x 0.30 x 0.50 4.3 5720.007 P0.50 x 0.50 x 0.50 6.0 5720.012 P

5e 5f 5g 5h 0.50 x 0.50 x 0.50 6.0 5720.013 P0.71 x 0.50 x 0.50 7.6 5720.014 P0.71 x 0.50 x 0.50 7.6 5720.015 P0.71 x 0.30 x 0.71 7.6 5720.016 P

The Layher Truss system contains 3-chord and 4-chord transoms of aluminium. They are available as H30 and H40 series.

The Layher Truss system is developed for lightweight to intermediate-heavy structures, which are mainly used in the exhibition sector. They are characterised by very high stability, compactness, versatility and very low operating weight. The installation is very simple, thanks to the direction-independent framework.

uring the assembly of many truss structures, ladders and rolling towers are a constant campanion.

Also therefore, ayher is your dependable partner.

EN_PL_Event_2015.indd 26 10.03.2015 08:08:10

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



27



Weight appro . kg

PUpcs.

Ref. No.

1 1 Truss H30D, aluminium straight, 3-chord, external dimension 287 mm




3 3 Truss H40D, aluminiumstraight, 3-chord, external dimension 387 mm






0.50 x 0.30 x 0.50 3.9 5720.003 P0.50 x 0.30 x 0.50 3.8 5720.006 P0.50 x 0.30 x 0.50 4.3 5720.007 P0.50 x 0.50 x 0.50 6.0 5720.012 P

5e 5f 5g 5h 0.50 x 0.50 x 0.50 6.0 5720.013 P0.71 x 0.50 x 0.50 7.6 5720.014 P0.71 x 0.50 x 0.50 7.6 5720.015 P0.71 x 0.30 x 0.71 7.6 5720.016 P

EN_PL_Event_2015.indd 27 10.03.2015 08:08:11

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



28

Alu truss systems


Weight appro . kg

PUpcs.

Ref. No.

1a 1b 1c 1abcdef

Truss corners H30D, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way

0.50 x 0.30 x 0.50 5.3 5723.003 P0.50 x 0.50 x 0.50 6.8 5723.012 P0.71 x 0.30 x 0.71 10.2 5723.016 P0.71 x 0.30 x 0.50 8.1 5723.017 P

1d 1e 1f 0.71 x 0.50 x 0.50 10.1 5723.020 P0.71 x 0.50 x 0.71 11.9 5723.024 P



0.60 x 0.40 x 0.60 5.1 5738.003 P0.60 x 0.40 x 0.60 4.8 5738.006 P0.60 x 0.40 x 0.60 5.8 5738.007 P0.60 x 0.60 x 0.60 7.7 5738.012 P0.60 x 0.60 x 0.60 7.7 5738.013 P

2e 2f 2g 2h 0.90 x 0.60 x 0.60 10.2 5738.014 P0.90 x 0.60 x 0.60 10.2 5738.015 P0.80 x 0.40 x 0.80 9.4 5738.016 P

3a 3b 3c 3abcdef

Truss corners H40V, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way

0.60 x 0.40 x 0.60 7.0 5741.003 P0.60 x 0.60 x 0.60 9.2 5741.012 P0.80 x 0.40 x 0.80 12.8 5741.016 P0.80 x 0.40 x 0.60 10.5 5741.017 P

3d 3e 3f 0.80 x 0.60 x 0.60 12.8 5741.020 P0.80 x 0.60 x 0.80 15.1 5741.024 P

4 4a 4b 4ab

o Corner 30V, aluminiumAttachment Attachment

0.29 x 0.29 x 0.29 9.8 5714.030 P0.105 x 0.29 x 0.29 1.3 5714.031 P0.21 x 0.29 x 0.29 3.3 5714.032 P

5 5a 5b 5ab


0.39 x 0.39 x 0.39 12.1 5732.030 P0.105 x 0.39 x 0.39 1.5 5732.031 P0.21 x 0.39 x 0.39 3.3 5732.032 P

6a 6b 6ab

Base plate H30, aluminium3-chord 304-chord 30

0.33 x 0.30 1.0 5701.072 P0.33 x 0.33 1.7 5701.073 P

7a 7b 7ab


0.43 x 0.38 1.6 5701.077 P0.43 x 0.43 2.9 5701.078 P

8a 8 8c 8abc

Connection partsConic connectorConic boltSecuring pin

0.09 0.2 5701.020 W0.07 0.0 5701.023 W0.06 0.0 5701.007 W

9 10 9 Conic olt it nut 8 0.07 0.1 5701.024 W

10 Conic half connector with thread M12 0.04 0.1 5701.034 W

EN_PL_Event_2015.indd 28 10.03.2015 08:08:16

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



29



Weight appro . kg

PUpcs.

Ref. No.

1a 1b 1c 1abcdef

Truss corners H30D, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way

0.50 x 0.30 x 0.50 5.3 5723.003 P0.50 x 0.50 x 0.50 6.8 5723.012 P0.71 x 0.30 x 0.71 10.2 5723.016 P0.71 x 0.30 x 0.50 8.1 5723.017 P

1d 1e 1f 0.71 x 0.50 x 0.50 10.1 5723.020 P0.71 x 0.50 x 0.71 11.9 5723.024 P



0.60 x 0.40 x 0.60 5.1 5738.003 P0.60 x 0.40 x 0.60 4.8 5738.006 P0.60 x 0.40 x 0.60 5.8 5738.007 P0.60 x 0.60 x 0.60 7.7 5738.012 P0.60 x 0.60 x 0.60 7.7 5738.013 P

2e 2f 2g 2h 0.90 x 0.60 x 0.60 10.2 5738.014 P0.90 x 0.60 x 0.60 10.2 5738.015 P0.80 x 0.40 x 0.80 9.4 5738.016 P

3a 3b 3c 3abcdef

Truss corners H40V, aluminium2-way 90 degree3-way 90 degree4-way cross3-way T-piece4-way T-piece5-way

0.60 x 0.40 x 0.60 7.0 5741.003 P0.60 x 0.60 x 0.60 9.2 5741.012 P0.80 x 0.40 x 0.80 12.8 5741.016 P0.80 x 0.40 x 0.60 10.5 5741.017 P

3d 3e 3f 0.80 x 0.60 x 0.60 12.8 5741.020 P0.80 x 0.60 x 0.80 15.1 5741.024 P

4 4a 4b 4ab


0.29 x 0.29 x 0.29 9.8 5714.030 P0.105 x 0.29 x 0.29 1.3 5714.031 P0.21 x 0.29 x 0.29 3.3 5714.032 P

5 5a 5b 5ab


0.39 x 0.39 x 0.39 12.1 5732.030 P0.105 x 0.39 x 0.39 1.5 5732.031 P0.21 x 0.39 x 0.39 3.3 5732.032 P

6a 6b 6ab


0.33 x 0.30 1.0 5701.072 P0.33 x 0.33 1.7 5701.073 P

7a 7b 7ab


0.43 x 0.38 1.6 5701.077 P0.43 x 0.43 2.9 5701.078 P

8a 8 8c 8abc

Connection partsConic connectorConic boltSecuring pin

0.09 0.2 5701.020 W0.07 0.0 5701.023 W0.06 0.0 5701.007 W

9 10 9 Conic olt it nut 8 0.07 0.1 5701.024 W

10 Conic half connector with thread M12 0.04 0.1 5701.034 W

EN_PL_Event_2015.indd 29 10.03.2015 08:08:17

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



30

Steel truss systems

Tower Truss a i Truss

pan m perm. line load p kg m

Bending cm

of perm. p

perm. single load F

kg

Bending cm

of perm. F

perm. single load in third

points F1 kg

Bending cm

of perm. F1

2 5865 0.1 11729 0.1 5865 0.14 2914 0.3 8210 0.3 5827 0.46 1804 0.9 5411 0.7 4059 1.08 998 1.6 3993 1.3 2995 1.710 626 2.5 3127 2.0 2345 2.612 423 3.5 2538 2.8 1903 3.614 301 4.6 2106 3.7 1579 4.716 222 5.7 1773 4.6 1329 5.918 167 6.9 1505 5.5 1129 7.220 128 8.1 1284 6.5 963 8.422 100 9.2 1096 7.4 822 9.624 78 10.2 933 8.1 700 10.626 61 11.0 789 8.8 592 11.428 47 11.5 661 9.2 496 11.9


Bending cm

of perm. p

perm. single load F

kg

Bending cm

of perm. F


points F1 kg

Bending cm

of perm. F1

2 5425 0.1 8676 0.1 5425 0.14 2147 0.7 4294 0.5 3220 0.76 938 1.5 2813 1.2 2110 1.68 514 2.6 2058 2.1 1543 2.710 319 3.9 1593 3.1 1195 4.112 212 5.4 1273 4.3 955 5.614 148 7.0 1036 5.6 777 7.316 106 8.6 851 6.9 638 8.918 78 10.1 700 8.0 525 10.420 57 11.3 574 9.0 430 11.722 42 12.2 465 9.8 349 12.624 31 12.6 369 10.1 277 13.026 22 12.3 284 9.8 213 12.728 15 11.1 206 8.9 155 11.6

0

1.000

2.000

3.000

4.000

5.000

6.000

7.000

8.000

9.000

10.000

2 4 6 8 10 12 14 16 18 20 22 24 26 28

zul. vert. Streckenlast p [kN/m]

zul. Einzellast F [kN/m]

zul. Punktlast bei 2 Drittelpunkten F [kN/m]

pan m

p kg/mF, F

1 kg

0

2.000

4.000

6.000

8.000

10.000

12.000

14.000

2 4 6 8 10 12 14 16 18 20 22 24 26 28




pan m

p kg/mF, F

1 kg

1 2 3 4 5 6 Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

1 Tower-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of axi-Truss,

as ground support, for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip

299 x 299Axial dimensions

on request

2 a i Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,

for advertisment signs or cable bridges, se with bolt dia. 15.80 mm and spins clip

569 x 569 Axial dimensions

on request

3 Nova-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of uper-Truss,



on request

7 8

4 Super-Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,



on request

5 Bolt, dia. 15.80 mm for Tower-Truss, ova-Truss and axi-Truss

15.80 x 80 0.17 on request

6 Bolt, dia. 20.00 mm for Super-Truss

20 x 100 0.32 on request

7 Safety clip, 2.80 mm for Tower-Truss, ova-Truss and axi-Truss

0.5 50 V 4905.001

8 Safety clip, 4 mm for Super-Truss

1.5 50 V 5905.001

perm. line load p kg/m

perm. single load kg

perm. single load in third points F

1 kg




1 kg

569 569

dia. 48,30

550 854

dia. 60,30

452 452

dia. 48,30

299 299

dia. 48,30

EN_PL_Event_2015.indd 30 10.03.2015 08:08:23

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



31


Nova Truss

The steel truss elements will be produced individually according to your requirements of length. Do not hesitate to ask us! We are pleased to help you.

Super Truss


Bending cm

of perm. p

perm. single load F

kg

Bending cm

of perm. F


points F1 kg

Bending cm

of perm. F1

14 877 3.3 6137 2.6 4603 3.416 659 4.2 5268 3.4 3951 4.418 509 5.2 4580 4.2 3435 5.420 402 6.3 4019 5.0 3015 6.522 323 7.4 3551 5.9 2663 7.724 263 8.5 3151 6.8 2363 8.826 216 9.6 2804 7.7 2103 10.028 179 10.7 2500 8.6 1875 11.130 149 11.8 2228 9.4 1671 12.232 124 12.7 1984 10.2 1488 13.234 104 13.5 1762 10.8 1322 14.036 87 14.2 1559 11.4 1169 14.738 72 14.7 1371 11.8 1028 15.240 60 15.0 1197 12.0 898 15.5


Bending cm

of perm. p

perm. single load F

kg

Bending cm

of perm. F


points F1 kg

Bending cm

of perm. F1

2 4724 0.1 9448 0.1 4724 0.14 2341 0.3 6497 0.4 4682 0.46 1421 1.0 4262 0.8 3196 1.08 781 1.7 3123 1.4 2342 1.810 485 2.6 2423 2.1 1817 2.712 324 3.6 1943 2.9 1457 3.814 227 4.7 1587 3.8 1191 4.916 164 5.8 1311 4.7 983 6.018 121 6.9 1086 5.5 814 7.120 90 7.8 898 6.2 673 8.122 67 8.5 736 6.8 552 8.824 50 8.9 595 7.1 446 9.226 36 8.9 468 7.1 351 9.328 25 8.4 354 6.7 266 8.7

0

1.000

2.000

3.000

4.000

5.000

6.000

7.000

8.000

9.000

10.000

2 4 6 8 10 12 14 16 18 20 22 24 26 28







1 kg

p kg/mF, F

1 kg

pan m 0

1.000

2.000

3.000

4.000

5.000

6.000

7.000

14 16 18 20 22 24 26 28 30 32 34 36 38 40







1 kg

p kg/mF, F

1 kg

pan m

1 2 3 4 5 6 Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

1 Tower-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of axi-Truss,


299 x 299Axial dimensions

on request

2 a i Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,



on request

3 Nova-Truss, steel, hot-dip galvanizedsable for roofings as vertical support for constructions of uper-Truss,



on request

7 8

4 Super-Truss, steel, hot-dip galvanizedsable for roofings as main transom, as ground support,



on request

5 Bolt, dia. 15.80 mm for Tower-Truss, ova-Truss and axi-Truss

15.80 x 80 0.17 on request

6 Bolt, dia. 20.00 mm for Super-Truss

20 x 100 0.32 on request

7 Safety clip, 2.80 mm for Tower-Truss, ova-Truss and axi-Truss

0.5 50 V 4905.001

8 Safety clip, 4 mm for Super-Truss

1.5 50 V 5905.001

EN_PL_Event_2015.indd 31 10.03.2015 08:08:26

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



32

QUICK AND CLEAN. FLEXIBLE FRONT-OF-HOUSE SOLUTIONS FROM LAYHER

The ayher Tower it ystem provides you with the right solution

for your Front-Of-House applications. To meet the most frequently

encountered re uirements, a total of 12 Tower complete ITs are

available.

E TE A A IA T

Thanks to the it ystem and ayher s flexible Allround e uipment,

there are no limits placed on variation.

hether it s a 2 or 3 bay width, with or without a projecting roof and

entrance, with 1, 2 or 3 stories. The ayher Tower it ystem means

more possibilities. Typical for Layher!

LAYHER FOH TOWER KIT SYSTEM

2 Quick and easy assembly thanks to optimum use of material.

2 eat and practically-minded design down to the last detail.

2 Each of the maximum of three levels is without a hindering

central support.

2 Complete enclosure using keder tarpaulins.

2 ery few special parts.

2 alculated in accordance with the latest standard E 13814.

2 Two inspection books available 4.14 x 4.14 (4 x 4) 6.21 x 4.14 (6 x 4).

T E E E IT T

FOH System, Roof and wall cladding

EN_PL_Event_2015.indd 32 10.03.2015 08:08:32

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



33

EN_PL_Event_2015.indd 33 10.03.2015 08:08:36

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



34

FOH System

FOH System Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 10

0EV

104

1 1 FOH beam 4.00 38.1 5573.010 W 2

4.14 38.6 5573.011 W 2

2 3 2 Event access deckwith aluminium hatch

1.00 x 2.00 33.5 5402.073 P 2

1.04 x 2.07 35.5 5402.083 P 2

3 Single step ladder with hook,10-steps, for item 7for storey height 2.50 m

2.70 x 0.45 7.7 5573.021 W 2 2

4 4 FOH rope holder set4 partsfor connection of the ballast bays

2.7 5573.002 W 2 2

5 6 Assem l os. 4 5 5 Rope fastenerfor ballast bays

1.20 1.3 5573.005 P 2 2

6 Rope fastenerfor roof stiffening

as 4.00 x 4.00 m 5.57 7.5 5573.003 P 2 2as 4.14 x 4.14 m 5.77 7.6 5573.004 P 2 2

Roof and wall cladding

Roof and wall cladding Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

7 - 9 10 7 Aluminium keder rail 2000 for side tarpaulins

2.50 3.8 4201.250 W

11 8 Aluminium keder rail 3000for roof tarpaulins

2.00 6.1 5574.200 P

3.00 9.2 5574.300 P

4.00 12.2 5574.400 P

5.00 15.3 5574.500 P

6.00 18.3 5574.600 W

9 Aluminium keder rail 9000 5.00 54.8 5577.500 P

6.00 65.8 5577.600 P

9.00 98.7 5577.900 P

10 Keder rail holder, rotatable 0.9 5573.000 W11 Hinged attachment for Event roof 3.4 5573.001 W

12 12 Half-coupler, with plate 0.20 x 0.10 2.1 5573.030 P

The ayher Tower it ystem provides you with the right solution for your Front-Of-House applications. To meet the most frequently encountered requirements, a total of 12 Tower complete IT are available.

One system – many variantsThanks to the it ystem and ayher s flexible Allround equipment, there are no limits placed on variation.

Whether it’s a 2 or 3 bay width, with or without a projecting roof and entrance, with 1, 2, or 3 storeys

5 6

The proven keder rail 2000. nown for its low weight. Ideal for lightweight applications, particularly for wall coverings and scaffolding covers.

The keder rail 3000 – very strong yet light. It is perfectly suited for medium spans, as found for example in and directing towers or in technical equipment and storage areas. The keder rail 3000 can also be used as a wall keder rail over large spans.

The keder rail 9000 is suitable as a heavy-duty marquee section for large and very large spans. Roofs and side coverings for large open-air stages can be constructed with this section, in addition to massive roofs for stands.

Assem l os. 4 5

7 - 9

EN_PL_Event_2015.indd 34 10.03.2015 08:08:42

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



35


FOH System Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

EV 10

0EV

104

1 1 FOH beam 4.00 38.1 5573.010 W 2

4.14 38.6 5573.011 W 2

2 3 2 Event access deckwith aluminium hatch

1.00 x 2.00 33.5 5402.073 P 2

1.04 x 2.07 35.5 5402.083 P 2

3 Single step ladder with hook,10-steps, for item 7for storey height 2.50 m

2.70 x 0.45 7.7 5573.021 W 2 2

4 4 FOH rope holder set4 partsfor connection of the ballast bays

2.7 5573.002 W 2 2

5 6 Assem l os. 4 5 5 Rope fastenerfor ballast bays

1.20 1.3 5573.005 P 2 2

6 Rope fastenerfor roof stiffening

as 4.00 x 4.00 m 5.57 7.5 5573.003 P 2 2as 4.14 x 4.14 m 5.77 7.6 5573.004 P 2 2

Roof and wall cladding Pos. Description Dimensions m

Weight appro . kg

PUpcs.

Ref. No.

7 - 9 10 7 Aluminium keder rail 2000 for side tarpaulins

2.50 3.8 4201.250 W

11 8 Aluminium keder rail 3000for roof tarpaulins

2.00 6.1 5574.200 P

3.00 9.2 5574.300 P

4.00 12.2 5574.400 P

5.00 15.3 5574.500 P

6.00 18.3 5574.600 W

9 Aluminium keder rail 9000 5.00 54.8 5577.500 P

6.00 65.8 5577.600 P

9.00 98.7 5577.900 P

10 Keder rail holder, rotatable 0.9 5573.000 W11 Hinged attachment for Event roof 3.4 5573.001 W

12 12 Half-coupler, with plate 0.20 x 0.10 2.1 5573.030 P

EN_PL_Event_2015.indd 35 10.03.2015 08:08:42

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



36

Inde

AAdapter for frame for tip-up seat 23

Allround wedge 23

Alu leg insert Q60 T13 17

Aluminium frame for tip-up seat 23

Alu truss system 26, 28

Assembly- et 23

BBase beam 15

Base collar 10, 11, 12

Base collar for modular stairway 13

Base lattice beam 15

Base plate20 10, 1140 10, 1160 1160, solid 10H30 29H40 29type 1 15type 2 15

Basic component 10

Bench 22, 23

Bench adaptor 23

Bench end 22, 23

Boltdia. 15.80 mm 30dia. 20.00 mm 30

10 x 70 21

ox orner30 2940 29

CClamp 16, 17

Conic bolt 29

Conic half connector 29

Connection part 29

Corner guardrail 21

EEvent access deck 35

Event deck 10

Event deck T10 11, 17square 11, 17

Event stage 8, 10

Event stands 18basic components and guardrails for stands 20benches and bucket seats 22

Event system 16

Event transom 10, 11

FFOH beam 35

FOH rope holder set 35

FOH System 32, 34

GGuardrail 12

Guardrail for modular stairway 13

Guardrail post for podium 13

Guardrail standard 20, 21

Guardrails with child safety features 12

Guardrail with child safety feature 13

HHalf-coupler 35

Handrail 12, 13

Hinged attachment 35

Hinged feet 16

Hinged foot 17

IInsert leg 16

Insert leg connector 16, 17

Intermediate step 21

Keder rail 2000 34, 35

eder rail 3000 34, 35

eder rail 9000 34, 35

eder rail holder 35

LLeg insert platform 16

Leg insert support 16, 17

Lift-off preventer 13, 21

Lift-off preventer for steel decks 21

Lock against lift-off 20

Lock against lift-off ST 86 20

Maxi-Truss 30

Novanta bucket seat 22, 23

ova-Truss 30

umber plate 23

OO-ledger 12

O-ledger LW 13

PPlastic corner 10, 11

Plug 23

Podia 8

QQ60 aluminium leg 16

RRoof and wall cladding 32, 34

Rope fastenerfor ballast bays 35for roof stiffening 35

Rubber pad 10, 11

SSafety clip

2.80 mm 304 mm 30

Seating stand 7

Seat support with rosette 22, 23

Short wedge 22

Side end guardrail 21

Side guardrail 21

Single step ladder 35

Special bolt with nut 15

Square half-coupler 10, 11

Stage 6

Stairway 12

Stairway guardrail 750 13

Stairway stringer 12

Standard0.67 m 10, 111.17 m 10, 11

Standard for modular stairway 13

Stand element1-step 20, 212-step 20, 21

Stand system 6

Steel deck support 20, 21

Steel truss system 30

Stringer for modular stairway 12, 13

Super-Truss 30

TTension clasp 10

Tension clasp for transom 11

Tip-up seat 23

Tower-Truss 30

Transom support 10, 11

Truss30 2730 2740 2740 27

Truss corners30 27, 2940 2940 29

Truss system 24

Truss-Transom 15

Universal base 14

- tairway stringer 750 13

EN_PL_Event_2015.indd 36 10.03.2015 08:08:42

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



37

EN_PL_Event_2015.indd 37 10.03.2015 08:08:43

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



38

Notes

EN_PL_Event_2015.indd 38 10.03.2015 08:08:43

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



39

EN_PL_Event_2015.indd 39 10.03.2015 08:08:43

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



ef.

o. 8

111.

227

Editi

on 0

4.20

15

Wilhelm Layher GmbH & Co. KGScaffolding Grandstands Ladders

Ochsenbacher Strasse 5674363 Gueglingen-EibensbachGermany

Post ox 4074361 Gueglingen-EibensbachGermanyTelephone 49 (0) 71 35 70-0Telefax 49 (0) 71 35 70-2 65E-mail export layher.comwww.layher.com

Proximity to the customer is a central factor behind ayher s success geographically spea-king too. Wherever our customers need us, we will be there – with our advice, assistance and solutions.

Layher is your dependable partner with more than 70 years of experience. ”Made by Layher“ always means ”Made in Germany“ too – and that goes for the entire product range. Superb quality – and all from one source.

ead arter in i en ac

Plant 2 in Gueglingen

SpeedyScaf

Allround Scaffolding

Event Systems

Accessories

Protective Systems

Shoring

Rolling Towers

Ladders

EN_PL_Event_2015.indd 40 10.03.2015 08:08:51

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df

PA

0101

7422

_Kat

_Eve

nt_E

N.p

df



Documents

LAYHER EVENT SYSTEMS CATALOGUE - Trescon Group OÜRef. No. 8111.227 Quality management certified according to ISO 9001:2008 by German TÜV-CERT LAYHER EVENT SYSTEMS CATALOGUE EN_PL_Event_2015.indd