Innovative fans made to measureDeveloped in Germany
Your specialist for fans & cooling systems
Your specialist for fans & cooling systems
Our aim: Technological leader for axial fans
Our services for you:We optimize your products and installations! Service range
Our reference: NOISEBLOCKER® – User-oriented brand for IT fans
The aim we set ourselves forms our position as leader in technology for axial fans. To realise our aim, we collabo-rate with scientists from different areas in our on-going and in-house research and development programme. In our specialised development laboratory we test and develop the results of basic research for technical application. As a result of our work, state of the art methods and technolo-gies have been developed in the last years that stand for what is technically feasible.
Fans and the ability to dissipate heat decide over the efficiency, quality, and the user experience of many technical products and installations. The goal of our work is to optimize these qualities with the right air and cooling systems.
What this means for your product or installation:
MORE EFFICIENCY due to cooler systems
PROLONGED DURABILITY
MAXIMUM FAILURE SAFETYdue to qualitatively adapted components
LESS SOUND EMISSIONdue to progressive technology and adapted component sets
STANDARD PRODUCT RANGEINDUSTRIAL FANS:Finished solutions for most installations,applications, product categories.
INDUSTRIAL FAN CONSTRUCTION SETIndividualised fans due to quick component manufacture.
CLASSIC ENGINEERING: DEVELOPMENT AND OPTIMIZATION OF ORDERIndividual development of solutions in the spectrumof fans and cooling systems including developmentor optimization of individual components.
FULL SPECTRUM OF MANUFACTURE:MINI SERIES AND MASS PRODUCTIONManufacture of fans, components or parts also in small numbers including a guaranteed avail-ability of spare parts.
INDUSTRIAL SERVICES MEASUREMENTS, ANALYSES, CONSTRUCTION ...We offer all the steps of classic engineering from development to manufacture as engineer-ing services also as individual services.
We have solutions for:
... AND MORE!
In IT technology, we are well known for our brand NoISE-BLoCKEr® as manufacturers of high quality fans. Many ex-perts use our fans as technological reference when doing
product comparisons. With our brand we can be found in over 33 countries. As a retailer, we offer the most extensive range of fans on the IT market in Germany.
BLACKNoISE® Deutschland GmbH offers a wide range of products and services for industrial fans and cooling systems.
We offer a choice of high quality fans by industrial standards or can develop complete product specific solutions. We also offer every phase of the engineering process as an individual service. This makes us at BLACKNoISE® Deutschland GmbH one of the very few real full service providers in this area. We engineer and develop our products directly in Germany. This is how we guarantee our customers to have constant access to our ever growing and highly specialised know-how.
WE WOULD LIKE TO DISCUSS YOUR REQUESTS WITH YOU.
PLEASE CONTACT US!
COMPUTER &IT TECHNOLOGY
SERVER TECHNOLOGY
OFFICE TECHNOLOGY
MEDIA ANDENTERTAINMENT
TECHNOLOGY
HOUSEHOLD APPLIANCES
BUILDING TECHNO-LOGY: HEATING, VENTI-LATION, COOLING, AIR
CONDITIONING
ENGINES AND MECHANICAL ENGINEERING
Deutschland GmbH Deutschland GmbH
In a technical environment that is constantly changing, remaining still means a step backwards. We take this into account and created our own research and development programme. With this programme, we test the results of basic research and realise ideas in form of new engineering solutions and technologies.
our customers benefit from our more advanced, more efficient and quieter fansand cooling systems.
Body-borne noise is one of the greatest challenges in the construction of fans. Vibrations of the rotor are transmitted to the entire chassis which results in a multiple increase of resonance effects of the entire system.
With our multiframe technology we develop fans that absorb almost all the vibrations within the frame. The result of this special multiple part construction are fans that cause less body-borne noise than the sound emission caused by the air stream.
In classic fans the sound emission of the airstream is louder than the body-borne noise. Forming of vortexes in the airstream causes this. With a special form of rotor blade, Blacknoise Deutschland Bionic Fans dissolve these air vortexes. This results in fans that are not only much quieter in action (accord-ing to optimization) but they also require up to thirty per cent less energy.
our in-house development laboratory is prerequisite for our on-going development of further solutions and technologies. our laboratory with special measuring and prototyping stations is especially designed to meet the requirements necessary for the development of fans and cooling systems. Engineering projects possible at the limits of audibility.
* < 10 dB, preparation to nil-dB possible** with cooperating partner
CAD workstations and 3D visualisation
fan and air guidance system monitor station
Deep sound acoustic analysis chamber*
Optical sound emission analysis (Acoustic camera)**
Rapid prototyping with component supply
ADVANTAGES BIONICS: Up to 30 per cent less sound emission and energy use, much more efficient.
There are fields of use where quiet fans are not quiet enough. With our development laboratory designed for deep sound devel-opment, we are able to optimize fans and air-based cooling systems within the limits of audibility. This is based on a psychoa-coustic analysis. Using design and selected materials, parts of the acoustic frequency spectrum are shifted into oscillation rang-es that cannot be perceived by or that are more pleasant for the human ear.
higher efficiency less volume higher energy efficiency
Multiframe technology:elimination of body-borne sound within the frame
Bionic fan technology: Less sound emission in the airstream
Research and developmentin our own special laboratory
Blacknoise sound designPSYCHOACOUSTICALLY OPTIMIZED FANS: LESS VOLUME AT SAME ACOUSTIC PRESSURE
BIONIC LOOP FANMULTIFRAME CHASSIS
Branch leading technologies – competence through research and technology!
Inspired by nature!
Deutschland GmbH Deutschland GmbH
Supported by:
due to a parliamentary resolution
Ventilation and cooling form the basis of many tech-nological products and installations. With our product range of industrial fans we offer solutions for the ma-jority of uses.
Technology keeps developing. Every product and every installation is different. This is why we are con-tinuously searching for new solutions for ventilation and cooling systems. our leading know-how and our specialised development laboratory enable us to also develop solutions to unusual, more demanding or entirely new uses.
We also develop products with the following criteria: extremely noise sensitive areas, especially energy efficient demands, use in areas with especially high performance requirements
Nevertheless, it is not always necessary to develop a product from scratch. It is often sufficient to spe-cifically optimize individual components or parts to noticeably improve a product!
In engineering, it is common to fall back on pre-fabri-cated fans from the product range. Yet using standard products almost always requires compromises. This is why we developed the fan construction set system, a speciality in our field. This quick component manufac-ture enables a fast and cheap way to assemble truly optimal fans for the relevant task.
Are you familiar with this scenario: as soon as you only require small amounts, the supplier suddenly loses interest in you? We are truly making an effort to meet your needs! For our customers we have included a small amount manage-ment in our production processes. This is how we keep the prices down for the production of limited numbers. Services for spare parts and warranty are part of this process.
real full service: The development laboratory of BLACKNoISE® Deutschland GmbH has all the equipment to develop fans and air-based cooling systems. It is not always necessary to use all our services. Industrial clients can also use only essential, individual services from our engineering processes.
RAPID PROTOTYPINGTwo prototyping stations alternativelyWith polyJet technology and FDM procedure. Sizes available up to 350 × 350 × 200 cm. CAD data trans-fer in StL format. Fans with compo-nent supply.24-hour service on request.
VOLUMEN-FLOW-ANALYSESVolume flow monitoring for fans and air carrying components. Checking of norms and determining characteristic curve of all standard DIN norms and measure-ment sizes: Volume flow, static pressure, dynamic pressure behaviour, energy effi-ciency, behaviour of numbers of revolu-tions, volume of air transportation, etc.
ACOUSTIC ANALYSESLow-dB-measuring chamber with stand-ard noise below 10 dB(A). Preparation to nil dB for developments in extreme sur-roundings possible. Possible analyses: acoustic pressure (dB) / Psychoacous-tics: Sone according to Zwicker, phone, frequency spectrum analysis / acoustic camera: optical noise source analysis*
*with cooperating partners
VISUALISATIONS & RENDERINGSVisual presentation and animations of components and entire products: In-teractive 3D renderings/Photo-realistic picture presentation/product anima-tions and films from 3D data sets/pres-entation in virtual environment/accept-ance of all common CAD formats.
Product range:Industrial fans
Engineering and individual development
Speciality in the field: Fan construction set system
Manufacture: Exactly what you need!
Every phase of engineering also available as individual service:
Standard sizes from 30 millimetres
IP55 seal
Cable management without loss in warranty
All standard output ranges
High quality ball bearing technology
Material: PBt with 30 per cent reinforced fibreglass
QUICK COMPONENT MANUFACTURE:
Format/form
Efficiency
Protection classes
Failure safety
Fans
Cooling systems
Individual components
Fan range and special engineering:comprehensive offer with real full serviceFans, cooling and ventilation, industrial engineering, technical analyses, construction
Electronics
Volume
Material
Price limit
Individual fans
Entire cooling systems
Individual components
optimization of existing systems
Completely new development
INCLUDING MINI SERIES
Deutschland GmbH Deutschland GmbH
Handed to you by:
Deutschland GmbHGiesenheide 25D-40724 Hilden
Phone: +49 (0) 21 03/25 57 0E-mail: [email protected]: +49 (0) 21 03/25 57 20
http://www.blacknoise.com
Your notes
Check out our website.
Innovative fans made to measureDeveloped in Germany
Your specialist for fans & cooling systems