IMEOM Dhaka 2019 2ndInternational Conference on Industrial and Mechanical
Engineering and Operations Management (IMEOM)
Date: 12-13 December, 2019 [Thu-Fri] Venue: Bangladesh Institute of Management (BIM), Sobhanbag, Mirpur Road, Dhaka 1207, Bangladesh ; www.ieombd.org/imeom2019
CALL FOR PAPERS Abstract Deadline:20 Sept201930 August 2019
Industrial Engineering and Operations Management(IEOM) Society of Bangladesh, a country chapter of IEOM society International, in collaboration with BIM is going to organize the 2nd International conference on Industrial and Mechanical Engineering and Operations Management (IMEOM) on 12-13 December, 2019 at Bangladesh Institute of Management (BIM), Dhaka Bangladesh. The objective of the conference is to share the knowledge and publish quality articles from the traditional and advanced areas, Engineering Management, Industrial Management, IPE and ME discipline thus bringing the professionals, engineers, academicians, researchers, and scientist community who will contribute in this conference by sharing their experiences and knowledge Scope: The conference scopes will be covering the various areas of Engineering Management, Industrial Management, Industrial and Production Engineering (IPE) and Mechanical Engineering (ME) topics including all new emerging technologies related to these fields of engineering and science. Publication: The accepted papers will be published in the conference proceedings which will be peer reviewed and will also available online. On the recommendation of the reviewers, selected papers will be also published in an international scientific journal of BIM. Conference Registration fees: The registration fee for a delegate covers a registration kit, conference proceedings, lunch, tea during the technical sessions and banquet.
Regular Registration Fee Early Registration Fee
Local Delegate BDT 5000 BDT 4000
Local Delegate (IEOM member/BIM Alumni) BDT 3500 BDT 3000
Foreign Delegate USD 400 USD 350
Foreign Delegate(IEOM Members) USD 300 USD 250
SAARC Delegate USD 300 USD 250
Accompanying Person (Local) BDT 2500 BDT 2000
Accompanying Person (Foreign) USD 50 USD 40
Student (Local) BDT 2500 BDT 2000
Student (Foreign/SAARC) USD 200 USD 150
Participant (Without Paper) BDT 5000 / USD 400 BDT 4000 / USD 350
IMPORTANT DATES Abstract submission : 20 Sept 2019 Notification of Acceptance of Abstract : 25 September 2019 Submission of Full Paper: 15 October2019 Notification of Acceptance of Paper : 5 November2019 Final Manuscript Due: 15 November 2019 Mode of Registration Fee payment: Please check the conference website
ME subject areas included, but not limited to: Fluid Mechanics and fluidics Compressible and incompressible Flow Aerodynamics Multiphase Flows Thermal Engineering Thermo-Fluid Mechanics Internal Combustion Engine Power Generation
IPE subject areas included, but not limited to: Supply Chain Management Management Information Systems Operations Management Business and Innovation Manufacturing Engineering Economy Energy Management Quality Control and Management Ergonomics & Human Factors Engineering Product Design & Development Sustainability and Green System Energy, Environment and Innovation Technology Management Virtual Reality Automation and Control Engineering Smart Materials and Composites Operations Research CAD/CAM and Industry 4.0 Computer Integrated Manufacturing Facility Planning, Layout Design and Material handling Micro and Nano Manufacturing Advance manufacturing process Reliability and Maintenance Management Simulations Artificial Intelligence Knowledgebase Engineering Concurrent Engineering Occupational Health and Safety Instrumentation & Measurements Engineering Management Textile Technology and Readymade Garments
Energy, Renewable Energy and Bio-fuel Bio-Medical Engineering Heating and Ventilation Air conditioning and refrigeration Environmental Engineering Computational Fluid Dynamics Micro and Nano Design Automobile Engineering Further Information: Prof Dr. Mohammad Iqbal, Conference Chair, IPE Dept., SUST, Sylhet, Bangladesh Prof Dr. Md. Mamunur Rashid ,Conference Co-Chair, SMC and Head, Production Management Division, BIM, Dhaka, Bangladesh Prof Dr Mohammad Sarwar Morshed, Conference Co-Chair, MPE Deptt, AUST, Bangladesh Dr A R M Harunur Rashid, Conference Secretary, IUT, Dhaka, Bangladesh IMEOM Dhaka 2019 Secretariat BIM Email: [email protected] ; [email protected] Phone: +8801844056105; +8801712700412 Organized by:
Production Management Division, BIM
and
IEOM Society of Bangladesh
pg. 1
2nd International Conference on Industrial and Mechanical
Engineering and Operations Management 2019(IMEOM 2019) Thursday 12
th December and Friday 13
th December 2019
Theme: Industry 4.0 for Sustainable Development
Sl
Designation Name
Affiliation Conveners of subject
committees
Organising Committee
1. Chair Prof. Dr. Mohammad Iqbal SUST Panel Discussion,
Awards, Sponsor,
Reception
2. Co-chair Prof. Dr. Md. Mamunur Rashid BIM Finance, Registration,
Venue, Transport,
Logistics, Food,
Accommodation
3. Co-chair Prof Dr. M Sarwar Morshed AUST Technical,
4. Conference
Secretary
Dr. A.R.M. Harunur Rashid IUT Communication, Website
& other media
5. Member Prof Dr M Kutubuddin KUET
6. Member Prof Dr.Md. NurulAbsarChowdhury IUT
7. Member Prof Dr Shamsuddin Ahmed IUT
8. Member Prof Dr. Md. Mosharraf Hossain RUET Engineering Education
Symposium
9. Member Prof Dr. Md. Iqbal Mahmud MBSTU
10. Member Prof. Dr. Sultana Parveen BUET Women in Academia &
Industrial Engineering
11. Member Engr SK Masum Kamal INDUSTRY Industry
12. Member Prof Dr. Md. Haider Ali Biswas KU
13. Member Prof. Dr. A M M Mukaddes SUST Workshop
14. Member Dr. A.S.M. Mojahidul Hoque JUST Students Competitions
15. Member Dr. Mamun Habib BRACU
16. Member Prof Dr. Lal Mohan Baral AUST
17. Member Dr. Uttam Kumar Datta BIM
18. Member Md. Mahbubul Alam BIM
19. Member Akhund Ahammad Shamsul Alam BIM
20. Member Engr. Md. Tariqul Islam BIM
21. Member Engr Md. Mehboob Hasan Kallol BIM
22. Member S.M. Ariful Islam BIM
23. Member Mohammad Mainul Islam BIM
pg. 2
Venue: Bangladesh Institute of Management (BIM), Sobhanbag, Mirpur
Road, Dhaka 1207, Bangladesh;
Website: www.ieombd.org/imeom2019
The international conference (IMEOM 2019) invites research papers from the academics, professionals,
engineers, researchers, technologists and scientist from all over the world. Industrial Engineering and
Operations Management (IEOM) Society of Bangladesh and Production Management Division,
Bangladesh Institute of Management is going to organize the 2nd
International conference on Industrial and
Mechanical Engineering and Operations Management (IMEOM 2019) at BIM, Dhaka, Bangladesh. The
objective of the conference is to share the knowledge and publish quality articles from the traditional and
advanced areas Industrial Management, IPE and ME discipline. The conference scopes will be covering
the various areas of Engineering Management, Industrial Management, Industrial and Production
Engineering (IPE) and Mechanical Engineering (ME) topics including all new emerging technologies
related to these fields of engineering and science. Our aim is to bring the professionals, engineers,
academicians, researchers, and scientist community who will contribute in this conference by sharing
their experiences and knowledge. The accepted papers will be published in the indexed conference
proceedings which will be peer reviewed and will also available online.
Terms of Reference (TOR):
Looking after overall management of the conference.
Conveners of different subject committees should be selected from the organizing committee members.
Conveners could co-opt two members whereas other members should be endorsed by the organizing
committee.
24. Member Md. Aminul Islam BIM
25. Member Tanvir Hossain BIM
26. Member M. Amenoor BIM
27. Member Mohammad Sayeedur Rahman BIM
28. Member NirjharMazumder BIM
29. Member ShaikhSajibur Rahman BIM
30. Member Md. Rajibul Hoque BIM
31. Member Mamun Muztaba BIM
32. Member Dr. Ahad Ali Exe Dir,
IEOM Int
International Cooperation
33. Member Dr. Khadem Dir Prog,
IEOM Int
Program Liaison
pg. 3
Chief Patron:
Tahmina Akhter, Director General, BIM
Patrons:
Dr. Parveen Ahmed, Director, BIM
Engr. Abu Naser Md. Shahidullah, Director, BIM
Advisory Committee
Name Description
Professor Dr. M.H.Khan President, BSME and Ex Vice- Chancellor, AUST& BUET, Bangladesh
Professor Dr. Anwar Hossain Ex Vice- Chancellor, AUST& IUT, Bangladesh
Professor Dr. Mohd. Rafiqul Alam Beg Ex Vice- Chancellor, RUET, Bangladesh
Professor Dr. AFM Anwarul Haque Prof,Dept. of MPE, AUST, Bangladesh
Professor Junichi Tamaki Japan
Professor Sharif Ullah Japan
Prof. Dr. Md. Rafiqul Islam Sheikh Vice- Chancellor, RUET, Bangladesh
Prof Dr Fazlee Elahi Ex Vice- Chancellor, IUT, Bangladesh
Professor Dr. M.S. J. Hashmi Dublin City University, Ireland
Prof Dr M. Imtiaz Hossain Ex Vice- Chancellor, IUT, Bangladesh
Professor Dr. Iqbal Hossain Ex Director, BIT,Chittagong and Former Prof,IUT,MCE
Prof. ShyamalKantiBiswas EX- Vice-Chancellor, CUET , and Prof,Dept. of IPE, AUST, Bangladesh
Professor Md Khaled Khalil Dept. of Mechanical Engineering, DUET, Bangladesh
Prof Dr. Md. Abdur RazzaqAkhanda Pro VC, Sonargaon University, Former Head, MCE,IUT
Professor Dr.MohammedAlauddin Vice-Chancellor, DUET, Bangladesh
Professor Dr. Mohammad Rofiqul Islam Vice-Chancellor, CUET, Bangladesh
Professor Dr. A.K.M. Sadrul Islam General Secretary,BSME, Former Head, MCE, IUT
Prof Dr M A Rashid Sarkar MIST, Bangladesh
Professor Dr. Tajul Islam Dept. of Mechanical Engineering, CUET, Bangladesh
Professor Dr. AKM Nurul Amin MIST, Bangladesh
Prof Dr Jamal Uddin CUET
Prof Yong Tack Im KIST, South Korea
Prof Trung Pham Birmingham University, UK
Prof Dr Raisuddin Khan IIUM, Malaysia
Prof Dr Mustafizur Rahman NUS, Singapore
Prof Abu Masud Wichita Univ, USA
Prof Dr Monoj K Tawari IIT, India
Prof Abdur Rahim UNB, Canada
Dr Alamgir A Chowdhury Western Michigan Univ, USA
Prof B K Bala JUST, former Prof, Bangladesh Agricultural University
Professor Dr. Abdullahil Azeem
IPE, BUET
Prof. Dr. Mohammad Rofiqul Islam Dept. of Mechanical Engineering, RUET, Bangladesh
pg. 4
Committees
Technical Committee
Sl Name Affiliation Designation
Prof Dr Mohammad Sarwar Morshed AUST Convener
Prof. Dr. Md. Mamunur Rashid BIM Co-Convener
Dr A R M Harunur Rashid IUT Member Secretary
Prof. Dr. Mohammad Iqbal SUST Chair, IEOM Bangladesh Chapter and Prof, IPE, SUST
Prof Dr. Kais Bin Zaman BUET Head, IPE
Prof. Md. Abdul Hannan Miah DUET Head, IPE
Col Md Humayun Kabir Bhuiyan MIST Head, IPE
Dr. Kazi Afzalur Rahman CUET Head, MIE
Dr. Kazi Arif-Uz-Zaman KUET Head, IEM
SUST Head, IPE
Brig Gen M Mustafa Kamal
MIST Ex-Head, IPE
Prof. Dr. Md. Mosharraf Hossain RUET Head, IPE
Prof Dr Md Zahid Hossain IUT Head, MCE
Prof. Dr. Jamal Uddin Ahamed CUET Head, ME
Prof. Dr. Md. Nurul Islam RUET Head, ME
Prof. Dr. Sobahan Mia KUET Head, ME
Prof Dr. MdAriful Islam SUST Head, ME
Prof Dr Dewan Hasan Ahmed AUST Head, MPE
Prof Dr. Ashraful Islam BUET Head, ME
Prof. Dr. Mohammad Zoynal Abedin DUET Head, ME
Col Md Humayun Kabir Bhuiyan, psc MIST Head, ME
Dr. Md. Abdus Shahid DUET Head, Textile Eng
Prof Dr A K M Masud BUET IPE
Professor Nikhil RanjanDhar BUET IPE
Professor Dr. M. Ahsan AkhtarHasin BUET IPE
Prof Dr. Mohammad Muhsin Aziz Khan SUST IPE
Prof Dr. Muhammad Mahmood Hasan
SUST IPE
Prof Dr. Md. Abu Hayat Mithu SUST IPE
Dr. Malek Miguel Maalouf
Research Fellow, Aalborg-AUST POHS Research Project
pg. 5
Dr Mamun Habib BRAC BRAC Business School
Prof Dr Jamaluddin Ahmed CUET ME
Prof Dr Ali BUTEX Textile
Prof Dr Iqbal Mahmud MBSTU Head, Textile Engg
Prof Dr. Hasan M Mostofa Afroz DUET IPE
Prof Dr Mahbubul Alam MIST ??? CUET???
Dr Faisal Kader MIST ME
Prof Dr Mahbub Hasan MME BUET
Dr Hasanuzzaman GCE BUET
Terms of Reference (TOR): The committee will prepare a list of reviewers for different research areas. Send papers to the reviewers and get the review done on time. Allocate accepted papers to different sessions according to track Preparing the proceedings of the conference with full papers and abstract book Preparing electronic means of dissemination like DVD for the proceeding and abstract book.
Finance, Accounts, & Registration Committee
Sl Designation Name Uni/Company Description
Convener Prof. Dr. Md. Mamunur Rashid BIM
Member Dr. A.R.M. Harunur Rashid IUT
Member Mohammad Humayun Kabir BIM
Member S M Ashraful Alam BIM
Member Md. Ekramul Haque BIM
Member JaduLal Sarkar BIM
Terms of Reference (TOR): Preparing the budget for the conference Keeping all invoices, money receipts, work orders, quotation letters etc. To Spend and receive money on behalf of the conference. Collection of money for registration from the participants Preparing financial report at the end of the conference. To Design and arrange bags, pens, brochures, posters, banners, crests, certificates, interior decoration
Accommodation
Sl Designation Name Uni/Company Description
Convener Prof. Dr. Md. Mamunur Rashid BIM
Member
Dr. Mohammad SarwarMorshed AUST
Member S M Ashraful Alam BIM
Member Md. Ekramul Haque BIM
Member JaduLal Sarkar BIM
pg. 6
Student Volunteers: 2 from AUST, 2 from IUT, 2 from JUST, 2 from SUST, 2 from BIM
Terms of Reference (TOR):
To assist the participants to get the accommodation in Dhaka.
Website, Facebook page, Print & Electronic Media Affairs
Sl Designation Name Uni/Company Description
Convener Dr. A.R.M. Harunur Rashid IUT
Member
Dr. Mohammad SarwarMorshed AUST
Member S M Ashraful Alam BIM
Student Volunteers: 1 from AUST, 1 from IUT, 1 from JUST, 1 from SUST, 2 from BIM
Terms of Reference (TOR):
Development and maintaining of the website and hosting Development and maintaining the Facebook event page of the conference. Dedicated photographers to capture important moments. Preparation of press releases with photos and distribution to different electronic and print media.
Food and Venue Management
Sl Designation Name Uni/Company Description
Convener Prof. Dr. Md. Mamunur Rashid BIM
Member
Dr. Mohammad SarwarMorshed AUST
Member Dr. A.R.M. Harunur Rashid IUT
Member Md. Rabiul Islam Khan BIM
Member S M Ashraful Alam BIM
Member Md. Ekramul Haque BIM
Member JaduLal Sarkar BIM
Student Volunteers: 2 from AUST, 2 from IUT, 2 from JUST, 2 from SUST, 6 from BIM
Terms of Reference (TOR):
Venue hire, seating arrangement, microphone setting, directional sign arrangement, banner and
backdrop making and putting up
pg. 7
Arrangement of lunches and tea break during the conference and conference dinner/lunch will be
served at conference venue.
Workshop
Sl Designation Name Uni/Company Description
Convener Prof Dr. AbulMukid Mohammad Mukaddes SUST
Member Engr SK Masum Kamal
SK Machinery Int
Member Dr. A.S.M. MojahidulHoque JUST
Terms of Reference (TOR):
Organize the workshops Moderate the workshop presentations
Students Competitions
Sl Designation Name Uni/Company Description
Convener Dr. A.S.M. MojahidulHoque JUST
Member
Lecturer, AUST
Member
Lecturer, JUST
Terms of Reference (TOR):
Organize the competition themes
Briefing the student participants, forming jury committees, and evaluations
Sponsors and Advertisement Management
Sl Designation Name Uni/Company Description
1 Convener Prof Dr Mohammad Iqbal SUST 2 Member Prof. Dr. Md. Mamunur Rashid BIM 3 Member Engr SK Masum Kamal
4 Member Dr. Mohammad SarwarMorshed AUST 5 Member Dr. A.R.M. Harunur Rashid IUT
Prof Dr M. Kutubuddin KUET
Prof Dr Bodiul Salam CUET ME
Prof Dr. Md. MosharrafHossain RUET
Prof Dr. Md. Kamruzzaman DUET
Prof Dr A K M Masud BUET IPE
Terms of Reference (TOR):
Prepare the documents for sponsors’ collection
Collect the advertisement and logs
Reception (VIP Management)
Sl Designation Name Uni/Company Description
pg. 8
1 Convener Prof Dr Mohammad Iqbal 2 Member Prof. Dr. Md. Mamunur Rashid BIM
3 Member Prof Dr.Md. NurulAbsarChowdhury 4 Member Engr SK Masum Kamal 5 Member Dr. Mohammad SarwarMorshed AUST
6 Member Dr. A.R.M. Harunur Rashid IUT
Prof Dr Md ZahidHossain IUT Prof, MCE, IUT
Professor Dr. Mohammad Muhsin Aziz Khan SUST
Dr. A.S.M. MojahidulHoque JUST
Prof Kader KUET
Prof Dr. Md. MosharrafHossain RUET
Prof Dr Ali BUTEX
Md. Rabiul Islam Khan BIM
S M Ashraful Alam BIM
Terms of Reference (TOR):
The committee will decide about the VIP management
Panel Discussion
Sl Designation Name Uni/Company Description
1 Convener Prof Dr Mohammad Iqbal SUST 2 Member Prof Dr. Mohammad SarwarMorshed AUST 3 Member Dr. A.R.M. Harunur Rashid IUT 4 Member Prof. Dr. Md. Mamunur Rashid BIM 5 Member Engr SK Masum Kamal
Industry
Sl Designation Name Uni/Company Description
Convenor
Prof Dr. Md. Iqbal Mahmud MBSTU
Member
Member Engr SK Masum Kamal
Terms of Reference (TOR):
The industry (RMG or Electronic Assembly Plant or Automobile Assembly Plant) will be selected around
Dhaka
Presentation at the industry premises and selection of speaker(S)
Program Liasion
Sl Designation Name Uni/Company Description
Convener DrMohammad Khadem Sultan Qubbos University
Member
pg. 9
Member
Terms of Reference (TOR):
Program planning and communications
Register of the communication and follow if any changes
Awards
Sl Designation Name Uni/Company Description
1 Convener Prof Dr Mohammad Iqbal SUST 2 Member Prof. Dr. Md. Mamunur Rashid BIM 3 Member Engr SK Masum Kamal SK Machinery Int 4 Member Dr. Mohammad Sarwar Morshed AUST 5 Member Dr. A.R.M. Harunur Rashid IUT
Terms of Reference (TOR):
Formation of the best paper jury panel, evaluation system, and announcement of best paper awards
Women in Academia and Industrial Engineering
Sl Designation Name Uni/Company Description
1 Convener Prof. Dr. Sultana Parveen BUET 2 Member Farkhunda Dorin BIM 3 Member Lamia Farha BIM 4 Member AklimaZaman BIM
Engineering Education Symposium
Sl Designation Name Uni/Company Description
1 Convener Prof Dr. Md. MosharrafHossain RUET 2 Member
3 Member
International Cooperation
Sl Designation Name Uni/Company Description
1 Convener Dr Ahad Ali Exe Dir, IEOM Int 2 Member
3 Member
pg. 10
Transport and Logistics
Sl Designation Name Uni/Company Description
1 Convener Prof. Dr. Md. Mamunur Rashid BIM 2 Member Prof Dr. Md. Iqbal Mahmud MBSTU 3 Member S M Ashraful Alam BIM
To assist the participants to get transport in Dhaka.
ABSTRACT SUBMISSION GUIDELINES
Personal Derails: Title: Prof/Dr/Mr/Ms/ First Name, LAST NAME of each Author(s); Name and address of the Institution : email address of author and coauthors if any: Abstract Title: in a line or two Abstract: Within 200 worlds without any reference Keywords: Maximum five words What an Abstract Must Include: Statement of the Problem or problem/innovation investigates Materials or methods used Results and brief analysis Justify how the result is new and important for the research community State the significance of the research outcome Note: Please do not provide any figure or table or formula in the abstract PUBLICATION OPPORTUNITIES
Conference Proceedings:
Outstanding papers will be considered for the international peer reviewed online proceeding (e.g. under
AIP). Subject to revision of the paper as per comments received at the conference.
Area of the conference presentation and publication IMEOM 2019
IPE Subject Area: Engineering Management Textile Technology and Readymade Garments Manufacturing Work Design & Measurement
pg. 11
Engineering Economy Energy Management Quality Control and Management Ergonomics & Human Factors Engineering Product Design & Development Sustainability and Green System Energy, Environment and Innovation Technology Management Virtual Reality Industrial and Production Engineering CAD/CAM and Industry 4.0 Computer Integrated Manufacturing Facility Planning, Layout Design and Material handling Micro and Nano Manufacturing Advance manufacturing process Industrial Robot and robotics Reliability and Maintenance Management/Engineering Supply Chain Management Management Information Systems Production planning and Control Operations Management Automation and Control Engineering Smart Materials and Composites Operations Research Simulations Artificial Intelligence Knowledgebase Engineering Concurrent Engineering Business and Innovation Industrial Safety and Green Manufacturing Occupational Health and Safety Instrumentation & Measurements ME Subject Areas: Fluid Mechanics and fluidics Compressible and incompressible Flow Aerodynamics Multiphase Flows Thermal Engineering Thermo-Fluid Mechanics Internal Combustion Engine Power Generation Energy, Renewable Energy and Biofuel Bio-Medical Engineering Heating and Ventilation Air conditioning and refrigeration Environmental Engineering Computational Fluid Dynamics
pg. 12
Micro and Nano Design Automobile Engineering The international conference (IMEOM 2019) invites research papers from the academics, professionals,
engineers, researchers, technologists and scientist from all over the world on anyone of the following
areas of research:
Publication Opportunities:
Conference Proceedings: All accepted abstract and full papers will be published in the referred
conference proceedings with ISBN and will be published electronically through AIP or Procedia.
Certificates, Awards and Written Feedback Report:
Best paper awards will be announced at the conference dinner and all awardee will receive certificate.
Unlike many other conferences, all authors will receive written evaluation report on the paper
presented which will aid them to improve the paper.
Conference Kits/Bag, Lunch, Dinner, and Tea Break: This conference is featured by several feedings such
as arrival, morning and after-noon break-foods, hot buffet lunch and gala conference dinner, in addition
to conference materials such as conference bag, pen and paper, name badge and printed conference
program. Registration Fee starts from Taka 3000 (US$ 100 for Foreign Participants) which includes all
facilities such inclusion of the paper in the proceedings, feedings and prizes. There will be an industrial
tour as an option and you will be required to registrar separately.
Further Information:
Prof Mohammad Iqbal, Conference Chair and Chair Paper Review Committee, SUST, Sylhet, Bangladesh
Prof. Dr. Md. Mamunur Rashid, Conference Co-Chair, SMC and Head, Production Management Division,
BIM, Dhaka, Bangladesh.
Prof Dr Mohammad Sarwar Morshed, Conference Co-Chair, IPE, AUST, Bangladesh
Dr A R M Harunur Rashid, Conference Secretary, IUT, Dhaka, Bangladesh